Used Air Extraction for sale (37,386)

Condition: new, The clean air dust extractors of the R160 series are used in trade and industry. They can be connected to individual machines, machining centers or via pipelines to multiple extraction points. The mobile clean air dust extractors impress with their high extraction performance while requiring little space. Advantages and features: - Version with bag filters can also be shaken off during operation. - Long service life thanks to bag filters - even with fine dust such as grinding dust - Direct connection to briquette press possible - Machine meets all common requirements (Category C, Bia certificate, residual dust content H3 < 0.1mg/m³) and can therefore be used in businesses without hesitation - High quality: Made in Germany Technical data: nominal volume flow: 1850 m³/h extruction nozzle: 160 mm low pressure V/min: 2550 PA motor rated-power: 2,2 kW chip collection volume: 280 l max. noise level: 73 dB(A) weight: 185 kg Gujdpevrv Ezjfx Ag Nsh filter area: 8,25 m² of surface treated polyester needled felt, category C, BIA certificate, electroconductiv, washable- H3 < 0,1mg/m³,

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Gsdpfor R Ewljx Ag Nouh Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: like new (used), functionality: fully functional, Like-new exhaust and ventilation hood! Features: UV lamp for sterilization. Motorized front glass window. Resistant to weak acids and alkalis. Adjustable airflow speed: 9 levels. Filter operation time alarm at 3,500 hours. Memory function in case of power failure. Air compensation at the rear to prevent turbulence in the work area. Ergonomic design with 8° front tilt for fatigue-free working posture. Gujdpfx Aswhkxtjg Njh Microprocessor control system with LED display indicating filter run-time. Without packaging! Price negotiable.

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Guodpju R Szyefx Ag Noh Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 - new exhibition machine -

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Connected load 4kW 1 pc. switch cabinet Gedoiau Tzopfx Ag Njuh pipe connection 350 mm length 2000 mm, width 700 mm, height 1950 mm lateral baffles 1 pc. suction pipe D= 350 mm 3900 mm long 1 pc. bend 90° 350 mm 1 pc. Elbow 45° 350 mm deflector hood 350 mm Circuit diagram, operating instructions Return air system Air capacity max. 6500 m³/h motor power 2 kW with heat exchanger 1" water connection LxWxH 2150x820x820 mm 2 pcs. return air duct 2000x950x400 mm 1 pcs. return air duct 950x950x400 mm external wall connection 700x700 mm bird grille 660x590 mm heat exchanger outlet 400x400 mm Unfortunately, we cannot answer inquiries without complete contact information.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, negative pressure: 2,630 Pa, volume flow: 8,000 m³/h, nominal flow rate: 6,950 m³/h, power: 11 kW (14.96 HP), H 3 "GS dust-tested" Extraction connection 350 mm Ø Pneumatic JET filter cleaning Extinguishing system with powder extinguisher With rotary air lock Gsdewty Uzspfx Ag Neuh

Condition: new, Design with bag filters and integrated extinguishing device Technical data: extruction nozzle 250 mm engine power S1 6,5 kW, 400V nominal volume flow 3534 m³/h max. volume flow 4900 m³/h cut surface vacuum measured with 2 m hose 2740 Pa filter area 22,4 m² Guodpsvr I R Ajfx Ag Njh filter dedusting compressed air chip collection volume 2 x 250 l residual dust content H3 (

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition Guedpfxoicic Ho Ag Njh

Condition: good (used), Year of construction: 2002, ILT UNIFIL MS 1MRV40 – Industrial Air Filter / Extraction System for Oil and Emulsion Mist Technical Specifications: Manufacturer: ILT Industrie-Luftfiltertechnik GmbH Model: UNIFIL MS 1MRV40 Year of Manufacture: 2002 Serial Number: 8160 Voltage: 3AC 400V Current Consumption: 3.2 A Frequency: 50 Hz Air Flow Rate: Approx. 2,700 m³/h (free-suction) Godpfov Nv Nbjx Ag Njuh Motor Power: 1.5 kW (Manufacturer: Siemens) Filter Stages: Multi-stage with pre-filter, main filter, and optional post-filter Housing Material: Robust sheet steel construction, painted Dimensions: Approx. L 1,145 mm x W 670 mm x H 1,150 mm Weight: Approx. 120 kg Connection: Pipe connection for exhaust air duct Available Condition: Used, functional, regularly serviced Description: For sale is a professional ILT UNIFIL MS 1MRV40 extraction system, a high-quality air filtration system for the efficient separation of oil and emulsion mists generated in metalworking and other industrial processes. The unit was specifically designed for continuous operation and does not require regeneration phases. It is ideal for turning, milling, grinding, and machining centers where airborne contaminants must be effectively filtered. Special Features: ✔ Highly efficient air filtration: Multi-stage filter system with washable pre-filters for a long service life ✔ Modular design: Filter inserts are replaceable and adaptable for different applications ✔ Energy efficient: Low power consumption with high extraction performance ✔ Robust construction: Sturdy housing for industrial environments, durable components ✔ Flexible installation: Can be installed directly on machines or centrally ✔ Easy maintenance: Tool-free filter replacement, low operating costs ✔ Made in Germany: High quality and reliable performance Areas of application: CNC machining centers Lathes, milling machines, and grinding machines Metal and plastics processing Industrial air purification in production facilities Oil and emulsion mist separation Shipping by freight forwarder available upon request Sold without warranty or guarantee. If you are interested or have any questions, please contact us!

Condition: excellent (used), Year of construction: 2017, operating hours: 463 h, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, IVAT Air-Tower 5000 K filter ventilation tower Filter ventilation of industrial welding halls - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Year of production 2017 Working hours: 463 h Parameters: Fan with a power of 3 kW. Built-in frequency converter. Efficiency 2500 m3/h - 5000 m3/h Max negative pressure 3100 Pa Filter inserts: 2 pieces Dust drawer with a capacity of 17 l. Very quiet operation 75 dB (A) Degree of purification - > 99.9 % Guedpfx Agjvzamhs Neh The device is in very good technical condition.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2433345525, Suction nozzle 125 mm Nominal volume flow 884 m³/h motor power 2,2 kW 16A mobile weight approx. 194 kg LxWxH: 1000 x 840 x 1650 mm tank size 730 x 660 mm manual shaking Gjdpfx Ageiw D U Nj Neuh

Condition: excellent (used), Year of construction: 2003, total height: 2,950 mm, total width: 1,350 mm, total length: 3,300 mm, Complete clean air extraction system with briquette press and piping with sliders etc. Extraction system for woodworking companies with a briquette press underneath. Extraction system ALKO Type: MOBIL-JET 250 Year of manufacture 2003 Extraction diameter 250 mm Rated output 4900 m³/h Motor output 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm With extraction control for automatic slider control. Briquette press WEIMA/ALKO Type: APC30S Year of manufacture 2007 Motor output 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm Incl. complete piping with branches, bends, sliders. There is another item of suction pipes with fittings available that can be purchased cheaply. The system has been dismantled and packed ready for loading. See pictures for condition, or refer to the item description. Parts can also be picked up yourself. All dimensions are approximate. All information is provided to the best of our knowledge but without guarantee. Subject to prior sale. The items can be picked up yourself or shipping is at the buyer's expense. Shipping costs are a guideline and may vary depending on distance and unloading options. The stated sales price is the net final amount plus VAT. Gedpsvr S Ncsfx Ag Neuh An invoice with VAT identification will be issued.

Condition: new, Holzprofi Maker clean air extraction system with double chip filtration. The first cleaning works via a cyclone, the second cleaning via a filter cartridge. Includes remote control. Nominal volume flow 1350 m³/h Negative pressure V/min 2000 Pa Filter area 2.6 m² Extraction nozzle 150 mm Branch 150/100/100/100 Motor rated power 1.5 kW 400V Chip collection volume 160 liters Dimensions 1250 x 650 x 1750 mm Weight 89 kg Godpfxovrv Ags Ag Nsuh

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters Gujdpsmquwqjfx Ag Noh - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: excellent (used), Year of construction: 2013, operating hours: 4,480 h, overall weight: 1,800 kg, suction capacity: 20,000 m³/h, Novus 20000 m3/h filter tower Filtration of industrial welding halls - numerous technological processes in production plants, carried out mainly in metalworking. Top suction and draught-free exhaust at the bottom - exactly in the work areas. The principle of stratified filtration, the device does not require the installation of pipelines. Cartridge filter cartridges - self-cleaning by means of compressed air pulses during operation. Cleaning of filters by means of pressure difference - no loss of compressed air. The principle of stratified ventilation : contaminated air is drawn in from above, filtered, and then released at floor level as clean breathable air without generating drafts, at speeds of less than 1.2 m/s. Exactly where workers inhale it. And that's over a wide 270-degree range. In doing so, the tower operates according to the principle of layered ventilation, recommended by labor unions and considered the best type of air circulation. Brand name: NOVUS Model: air FTower-20,000 Year of production 2013 working hours : 4480 Parameters: 15 Kw fan Air flow rate 20000 m3/h Filtration area 222 m2 6 pieces of cartridges Additional final fine filter with a surface area of 65 m2 in the filtration class F9 gives us a higher efficiency of air purification and further protects the fan in case of damage to the main filter. Dust drawer with a capacity of 200 l. Very quiet operation of 75 dB (A) Cleaning degree - > 99,9 % Gusdot R N Tlepfx Ag Njh Technical documentation included Stock no.: 0900

Condition: good (used), Year of construction: 2016, operating hours: 3,890 h, filter area: 222 m², suction capacity: 20,000 m³/h, IVAT 20000 m3/h filter ventilation tower Industrial welding hall filtration - numerous technological processes in production plants, mainly carried out in metalworking. Suction from the top and draft-free exhaust from the bottom - exactly to the workplace. The principle of layered filter ventilation, the device does not require the installation of pipelines. Cartridge filter inserts - self-cleaning by means of compressed air pulses during operation. Filter cleaning by means of pressure difference - no loss of compressed air. The principle of layered ventilation: contaminated air is sucked in from the top, filtered and then released at floor level as clean air suitable for breathing without generating drafts, at a speed below 1.2 m/s. Exactly where employees inhale it. And this in a wide range of 270 degrees. The tower operates in accordance with the principle of layered ventilation, recommended by trade unions and considered the best type of air circulation. Brand: IVAT Model: Air FTower-20.000 Year of production 2016 Working hours: 3890 Parameters: 15 kW fan Air flow 20000 m3/h Filter surface 222 m2 Gedovrgbtopfx Ag Nsuh 6 cartridge inserts Built-in frequency converter. Additional final fine filter with an area of 65 m2 in filtration class F9 gives us higher air purification efficiency and additionally protects the fan in the event of damage to the main filter. Dust drawer with a capacity of 200 l. Very quiet operation 75 dB (A) Purification degree - > 99.9 % Stock no.: 0944

Condition: excellent (used), Year of construction: 2018, operating hours: 3,934 h, suction capacity: 18,000 m³/h, negative pressure: 2,000 Pa, IVAT Air Tower 18000K Filtration Tower Filtration of industrial welding halls - numerous technological processes in production plants, carried out mainly in metal processing. Suction at the top and draft-free exhaust at the bottom - right into the work areas. Gjdpfstrwzwjx Ag Njuh The principle of stratified filtration, the device does not require the installation of pipelines. Cartridge filter cartridges - self-cleaning by means of compressed air pulses during operation. Cleaning of filters by means of pressure difference - no loss of compressed air. The principle of stratified ventilation : contaminated air is drawn in from above, filtered, and then released at floor level as clean breathable air without generating drafts, at speeds of less than 1.2 m/s. Exactly where workers inhale it. And that's over a wide 270-degree range. In doing so, the tower operates according to the principle of layered ventilation, recommended by labor unions and considered the best type of air circulation. Year of production 2018 operating hours : 3934 Parameters: 11 Kw. fan with frequency converter Air flow rate 18000 m3/h Filtration area of 150 m2 6 pieces of cartridges Very quiet operation Degree of purification - > 99,9 % Equipment: - IVAT.Energy package 11-18.5.(Siemens Frequency converter) - Control of the IVAT device in the room(fully automatic). - IVAT.Temperature control (Temperature control and monitoring) - IVAT Spark fire protection(sparks and fire sensors in the tower) - IVAT.Industrie-Energie4.0 (SPS Siemens + Ethernet remote maintenance + full graphics Display + connection to control center Fire alarm + energy manager) Dimensions: width - 1900 mm depth - 1530 mm height - 3600 mm

Condition: used, Year of construction: 2017, total height: 3,000 mm, total width: 1,000 mm, total length: 3,350 mm, - Capacity [m³/h]: 6000 - Number of filter bags [pcs]: 45 - Filter length [mm]: 1860 - Filter diameter [mm]: 200 - Filter surface area [m²]: 55 - Connection diameter [mm]: 310 - Main fan [pcs]: 1 - Main fan power [kW]: 5.5 - Briquetting press present: Yes - Collection bins: Yes - Number of bins/bags [pcs]: 2 - Year: 2017 - Documentation available: Yes Guedpexixfbsfx Ag Njh - CE marking present: Yes - Serial number: 1313000055R - Transport dimensions: 3350mm x 1000mm x 3000mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Price including all parts visible on the photos Gjdpsvwl Naefx Ag Neuh

Condition: excellent (used), IVAT Air FTower 5000 m³/h – Welding Fume Extraction Unit Year of manufacture: 2017. The system is fully operational and has only 1,676 operating hours. It is ideally suited for filtration in industrial welding halls as well as other technological processes in metalworking. ⸻ Technical Data • Machine type: IVAT Welding Fume Extraction Unit • Model: IVAT Air FTower 5000 m³/h Filter Tower • Input voltage: 400 V • Total height: 2,900 mm • Filter area: 80 m² • Extraction capacity: 5,000 m³/h • Fan output: 5.5 kW • Filter cartridges: 4 pcs • Additional fine filter: Filtration class F9 • Dust collecting container: 100 l • Noise level: 75 dB(A) • Degree of filtration: > 99.6% ⸻ Special Features & Operation • Layered ventilation principle: Contaminated air is drawn in at the top, filtered, and draft-free air is discharged at floor level—precisely where personnel are located. • Wide 270-degree airflow ensures optimal distribution without draughts ( Gusdpoxk Trfofx Ag Nsh

Condition: good (used), Year of construction: 2017, operating hours: 12,811 h, functionality: fully functional, machine/vehicle number: Airtower FT 15.000 EC, overall weight: 1,480 kg, total width: 1,756 mm, total length: 2,066 mm, total height: 3,643 mm, power: 3 kW (4.08 HP), Manufacturer: Novus Model: Airtower FT 15,000 EC Description: Welding fume extraction unit Fan power: 3 x 3.9 kW Motor: 400 V, 50 Hz Guodov N U Tljpfx Ag Noh Weight: 1,480 kg Year of manufacture: 2017 Operating hours: 14,783 h 2 identical Airtower units available, price is per unit.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Kemper CleanAirTower - CleanAirTower room air purification Energy-efficient room ventilation based on the displacement ventilation principle for welding fumes in production halls Application area: - For production and storage halls with high dust loads Guodpswthbvsfx Ag Neh - Workshops where local extraction is not possible - As a supplement to local extraction systems - Environments with changing sources of dust/fume Benefits/Features: - Effective energy capture through Pinball method and Tornado principle - Low risk from foreign objects - Reduced heating costs due to air recirculation and distribution - Long filter service life through optimized airflow - High safety due to dust disposal without contamination - Cost-effective installation, also retrofittable, as no ducting is required - New head element retrofittable to existing systems - Safe transport and easy installation via crane lugs - KEMPER-Cloud connection via mobile network Technical data: * max. volumetric flow: 6,000 m³/h * filter area: 60 m² * motor power: 5.5 kW * supply voltage: 3 x 400 V, 50 Hz * control voltage: 24 V DC * rated current: 11.0 A * sound pressure level: 72 dB(A) * compressed air connection: 5 - 6 bar * dimensions (W x H): 1,172 x 3,622 mm * weight: approx. 666 kg

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" Gedpsl Dw U Djfx Ag Njuh The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air Guodpfx Aeib Dadsg Nsh air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: used, Used Extraction unit comprising : Ø 1 DE DIETRICH stainless steel reactor • Capacity : 310 litre • Electric heating: 6 x 2 kW • Frame agitation Ø 1 stainless steel heat exchanger • Surface area : 2 m² • 29 tubes - Ø 20 x 150 mm Ø 1 stainless steel vessel 600 litre Gujdpfjxgfv Usx Ag Neh • Ø 900 x 1300 mm Ø 1 liquid ring vacuum pump • Type LOHE 25309 • Motor : 2.2 kw - Hp 3– Rpm 3000 – 3x 220/380 volts Specifications: Capacity: 82 gal Diameter: 35.4" Straight Side: 51.18" Material of construction: stainless steel Type of stainless: DE DIETRICH stainless steel