Used Angle Drill for sale (11,001)

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Ihedpsw Rag Dofx Addet Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery.

Condition: good (used), Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm -Thickness: 18 mm Iodpfob E N Ttsx Addeht -T-slots: 12 mm -Surface: milled -Weight: 3.5 kg

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,650 mm, table load: 6,000 kg, spindle diameter: 125 mm, spindle speed (min.): 7 rpm, spindle speed (max.): 1,000 rpm, table length: 1,400 mm, table width: 1,525 mm, feed length W-axis: 800 mm, overall weight: 18,000 kg, 1 used table-type boring mill Manufacturer: JUARISTI Model: MDR 125 Year of manufacture: 1986 Control: Heidenhain TNC 155 Table size: 1525 x 1,400 mm Table rotation: 360 degrees Travels X-Y-Z-W: 2,000-1,500-1,650-800 mm Spindle mount: SK 50 Speed range: 7 - 1000 rpm Feed: 0 - 2000 mm/min Rapid traverse: 5,000 mm/min Table rotation: 1 rpm Power connection: 30 kW Weight: 18,000 kg Control cabinet: 2,500 x 750 x 1,700 mm A large quantity of tooling can be purchased additionally. As a rule, the machine is sold without accessories. Isdpfjxg Imisx Addeht

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Iodpfx Ajx Uyzqsddoht 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1994, High-speed radial drilling machine Donau Danuflex145 Iodpowtq Dysfx Addjht

Condition: excellent (used), functionality: fully functional, Grindable diameter from 2 to 40 mm. Iedpfx Adox U Eddjdeht Smallest and largest point angle: 40 – 180°. For right- and left-cutting tools, 1-12 cutting edges. Suitable for sharpening twist drills, step drills, and taps. Accessories and an operating manual are included.

Condition: used, Year of construction: 2012, Serial number: 120705xxxx Ijdex Dhakopfx Addjht Please contact ATS Norway for more information Please provide reference number upon request: 21979 Specifications: - 2012 model - Hours: Owner is uncertain - Double key - Deutz Engine - Water tank - Undercarriage (see pictures) - Washer - Comes with drilling equipment, 3 hammers - 4-10 inch holes - Services have been done myself - Ready for delivery Own weight: Model: 2012 Gemsa Brønnborerigg

Condition: good (used), Clamping angle for workpiece clamping -Dimensions: 196/80/H100 mm -Thickness: 12 mm Ihedsb E N Tujpfx Addjt -T-slots: 8 mm -Surface: milled -Weight: 3 kg

Condition: used, Items as new or nearly new and used wood drills mainly in sizes 10, 13 and 26 mm. Remaining stock of a double-end profiler with drilling assemblies. Ijdpsx Tvbwjfx Addsht

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, total width: 370 mm, total length: 180 mm, total height: 190 mm, input voltage: 230 V, rotational speed (max.): 5,300 rpm, overall weight: 10 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.18 kW (0.24 HP), grinding diameter: 13 mm, Grinding of drills with a diameter of 2 mm to 13 mm Adjustable angle ----- 90 and 135 Grinding speed ----- 5300 o/min Grinding stone ----- CBN 200 Motor ----- 230V/1F/180W Weight ----- 10 kg Isdpfsga T D Tex Addeht

Condition: good (used), Floor drilling machine MK3 from ERD* - MK3. Drilling machine, floor drilling machine, pillar drilling machine -Delivery: in as-is condition as inspected -Motor: HEW 0.8 kW -Table size: Ø 355 mm -Spindle holder: MK3 -Travel distance: 500 mm -Outreach: 300 mm -Pillars: Ø 110 mm -Spindle stroke: 150 mm -Transmission via: V-belt -Dimensions: 850/500/H1850 mm -Weight: 294 kg Condition: used Ihedstvfhvjpfx Addjt

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Ihjdpfx Ajx Sw Ipsddjt Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21885 Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: Isdpfx Aoxy Eyaeddeht The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm Ihjdpeir E Snefx Addst -Total weight: approx. 182 kg

Year of construction: 2023, condition: new, machine/vehicle number: PRJ065955, ALZMETALL bench drill drilling capacity in steel 12mm Isdpfx Adolub Rdjdoht Drill chuck mounting B16 outer taper, spindle stroke: 40mm, throat: 200mm, column diameter: 50mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min./max. 110/250, feed by hand, machine height without options: 670mm, net weight: 64 kg. - Speed infinitely variable 250-5000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in display, machine status indicators and warnings in display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint finish: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: new, functionality: fully functional, spindle speed (max.): 2,840 rpm, spindle speed (min.): 220 rpm, total height: 1,050 mm, column diameter: 72 mm, drilling capacity: 16 mm, type of input current: DC, overall weight: 47 kg, total length: 300 mm, total width: 500 mm, spindle mount: MK 2, input voltage: 230 V, drill chuck size: 16 mm, stroke length: 85 mm, input frequency: 50 Hz, table length: 290 mm, table width: 290 mm, Motor ----- 550W - 230V - 1Phase Drilling capacity ----- 16 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Worktable ----- 290 x 290 mm Iedpfx Aok Iuzieddeht Foot ----- 420 x 250 mm Column diameter ----- 72 mm Overall height ----- 980 mm Weight ----- 47 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Iodpowvzrmofx Addeht Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Condition: good (used), bench drill, pillar drill, column drill -Manufacturer: AEG, Bench drill type DTBK-10 -Clamping table: 175 x 175 mm -Spindle mount: Drill chuck B16 -Protrusion: 200 mm -Column: Diameter 60 mm -Spindle stroke: 70 mm Ihjdpfshfavqsx Addjt -Motor: 0.25 kW / 2800 rpm -Voltage: 380 V -Dimensions: 580/590/H730 mm -Weight: 60 kg

Condition: new, Year of construction: 2023, machine/vehicle number: PRJ065958, ALZMETALL bench drilling machine drilling capacity in steel 16mm Short spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-table min./max. 75/357mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min. / max. 437/437mm, feed by hand, machine height without options: 825mm, net weight: 83 kg. - Speed infinitely variable 100-2000 rpm Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display, machine status indicators and warnings in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. Ihjdpfx Ajlubw Isddet AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: good (used), Year of construction: 1956, bench drill, pillar drill, column drill Iedjflk Hmepfx Addoht -Recording: MK2 -Protrusion: 260 mm -Travel distance: 190 mm -Speeds: 435 - 4350 rpm -Column diameter: 80 mm -Spindle stroke: 70 mm -Motor power: 450 W -Base plate: Sheet metal plate -Dimensions: 645/635/H780 mm -Weight: 130 kg

Condition: good (used), Bench drill, stand drill, pillar drill, pillar drill Ijdpfx Adjmzkg Rjdeht -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 400 - 3500 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Condition: good (used), Spare part for grinding machine, angle grinder, lathe tool grinder, tap and die grinder, milling cutter grinder, surface grinder, drill grinder -Clamping angle: for tool grinding machine -Type: unfortunately without a type designation -Details: see photos -Dimensions: 150/150/H215 mm -Weight: 8.2 kg Ihjdpfskahkcex Addst

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet -Dimensions: 1600/660/H800 mm Isdpfx Adocba T Dodoht -Weight: 38 kg

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm Isdpfx Ajcba T Aoddoht -Connection: Ø 515 mm -Material: Steel sheet -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Condition: good (used), Drill, pillar drill, column drill, column drill -Manufacturer: Alzmetall, pillar drilling machine type AB5/S -Engine: VKS 3 kW -Speed: 40 - 800 rpm, continuously variable right-left rotation -Feed: 0.1 - 0.14 - 0.2 - 0.28 - 0.4 mm/rev. -Table size: Ø 500 mm, travel 470 mm -Spindle holder: MK5 -Spindle stroke: 240 mm Ihsdpjr Ngp Uofx Addot -Projection: 380 mm -Column Ø: 220 mm -Dimensions: 1450/680/H2160 mm -Weight: 1262 kg