Used Atlas Copco Lg 500 for sale (371)

Condition: used, Year of construction: 2019, operating hours: 12,100 h, functionality: fully functional, machine/vehicle number: 010460, We are offering a high-performance industrial compressor from Atlas Copco for sale. The unit is used, has been regularly maintained by qualified personnel, and is immediately ready for operation. Technical specifications: Type: GA37 VSD+ FF (VSD+ technology for maximum energy efficiency) Operating hours: 12,100 hours Condition: Used, very well maintained, and immediately ready for operation. Fpodpfszdqz Djx Aayol The compressor can be inspected and tested on-site in Kiel after prior arrangement.

Condition: used, Year of construction: 2020, operating hours: 5,945 h,

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly Fpsdpfxozv Ei He Aayol The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Maximum height: 3.5 m Power: 1 x 320 W Wind resistance: 50 km/h Mains frequency: 50 Hz Fodpezkzc Sofx Aayspl

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Fpodpfx Aael R Hy Ajyjl Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: new, volume flow: 0.79 m³/h, Atlas Copco G5FF 500 l screw compressor, NEW, with refrigerant dryer. Specifications: • Condition – New Fedpfxjg Tzvxe Aayopl • Manufacturer – Atlas Copco • Capacity – 790 l/min • Main motor power – 5.5 kW • Tank – 500 l • Maximum working pressure – 10.0 atm • Built-in refrigerant dryer • Electronic adjustment of compressor operating parameters • Soundproofed enclosure (only 65 dB) • Complies with CE standards • Weight – 221 kg Additional information: • Manufacturer's warranty can be obtained after commissioning by an authorized Atlas Copco service center. • Operating manual in Polish. • Available within 7-10 business days.

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor, NEW Specifications: • Condition – new • Manufacturer – Atlas Copco Fodshkttpjpfx Aayepl • Capacity – 984 l/min • Main motor power – 7.5 kW • Tank – 500 l • Maximum working pressure – 10.0 atm • Built-in refrigerant dryer • Electronic adjustment of compressor operating parameters • Soundproofed enclosure (only 67 dB) • Complies with CE standards • Operating manual in Polish • Weight – 227 kg Additional information: • Manufacturer’s warranty available after commissioning by an authorized Atlas Copco service center • Available within 7 working days

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Date of manufacture - 2009. Working pressure - 10 bar. Working hours - 4824 hours. Fpsdpfx Aajzu Aw Ssyol Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Fjdpfx Aovpq Tboayspl Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1500 from 2016. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer Atlas Copco/ Epiroc MB1500 from 2016 with Conti Lube, all bushes, seal kit, 2 guide plate small, 2 guide plate, 2 shock absorber, guide, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted. Fodpfx Aajvpq Thjyspl MB1600 MB1650 MB1700 MB1200

Condition: used, Year of construction: 2008, operating hours: 85,394 h, functionality: fully functional, machine/vehicle number: APF 136194, overall weight: 2,550 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 2,200 mm, space requirement length: 3,000 mm, space requirement width: 1,600 mm, motor manufacturer: ABB, fuel type: electric, ATLAS COPCO ZT 55 VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Our company offers a professional level of service and high-quality products, all of which have been “tested” in the market, guaranteeing a successful partnership with you. We offer a warranty on used compressors and dryers! Our strength is our 24/7 compressor service. ATLAS COPCO GA18VSD Screw Compressor with Inverter, 18.5 kW, 3.35 m3/min, 13 bar Technically sound and ready for operation. Fpsdpey Amh Hjfx Aayel I also have a dryer with a filter set. A preferential price is offered for the combined purchase.

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: Fsdpfxeq E Iras Aayepl • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: good (used), functionality: fully functional, overall weight: 1,150 kg, Year of construction: 2010, Compressor/Atlas Copco GA45P compressor Maximum allowable working pressure (MAWP) 7.8 bar/113psi Fedpfov Ey Tiox Aayspl Capacity 133.7 l/s 183.3CFM 8.02m³/min Voltage 400V 50Hz Power 45kW/60HP 2985 pbr/min Weight 1150kg Year of manufacture 2010 Dimensions 2000x1000x1800mm

Condition: used, Year of construction: 2018, operating hours: 3,450 h, functionality: fully functional, overall weight: 23,000 kg, For sale: Plug & Play nitrogen generation system Nitrogen generator Manufacturer: AtlasCopco / AirCo Type: PSAL58SN Year of manufacture: 2018 Serial number: 2018-21968 Weight: approx. 24 tons (estimated) Temperature min./max.: +3°C / +45°C Maximum pressure: 300 bar Operating voltage: 400 volts Installed in a 40" container, insulated with intake/exhaust air vents, Fpodpfxexvtl Ne Aayel Winter/summer mode Activated carbon filter type AK300 Pre-/post-filter type AF267UHU Nordpol cut system type 100PlusPan 2 x high-pressure compressors, each with a capacity of 15 kW 2 x nitrogen tanks, capacity 500L / 1,000 liters each Absorption dryer type A-DRY-105 2 x filter type AF85H 6 x nitrogen bundles, 300 bar 56 cubic meters per hour continuous production capacity Purity: 99.9% (depending on production capacity) Power consumption: 125 amps Transportation can be arranged upon request. If you are interested or have any questions, please send me a message. More photos and technical details available upon request. All information is provided without guarantee. Errors and prior sale are reserved. Price: Net export price. For further questions, please call. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype For an additional charge, we will handle all customs and registration matters. For an additional charge, we will transport the vehicles to the port.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 9.7 m³/h, operating pressure: 8 bar, pressure (min.): 4.5 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Fully functional Atlas Copco screw compressor, model GA 55, in new condition. Fsdjzzq Ewspfx Aayopl

Condition: used, Atlas Copco GA 118 Rotary screw compressor Fsdpfjzz Rm Uex Aayepl

Condition: excellent (used), Year of construction: 2016, Atlas Copco SF8 + FF Oil Free Air Compressor This is a Used Atlas Copco SF8+FF Oil Free Scroll Air Compressor manufactured in 2016. SF+ 8 multi-scroll units bring in the benefits and flexibility of a modular system utilizing two to four compressor modules integrated into one canopy. The Elektronikon® continuously monitors the status of each element and starts and stops the compression elements, thereby ensuring that the compressed air output matches the air demand. Moreover, the perfect air quality and user-friendliness of these units guarantee a superior production process. Manufacturer: Atlas Copco Model: SF8 + FF HC Year: 2016 Capacity: 0,68m3/h Installed Power: 7,4 kW Noise Level: 63 dB Fpsdpfxsv D Haye Aaysl Max. working pressure: 9,75 bar Machine Dimensions LxWxH: 1.700x760x1.850 mm Machine Weight: 457 kg.

Condition: like new (used), Year of construction: 2022, operating hours: 175 h, functionality: fully functional, overall weight: 340 kg, fuel tank capacity: 500 l, volume flow: 1,994 m³/h, noise level: 67 dB, Atlas Copco G15FF screw compressor Specification: Fpedjvkxrnepfx Aaysl • condition - used • manufacturer - Atlas Copco • model - G15FF • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power - 15.0 kW • tank - 500 l • maximum operating pressure - 10.00 atm • working hours under load - 175 mth • working hours - 715 mth • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • 2022 year of production • weight - 340 kg Additional information: • the machine is in excellent technical condition, ready for immediate use • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Year of construction: 2017, condition: used, Air dryer Weight 128 kg Compressed air pressure 13 max Ambient temperature max 46°C Fpsdpfxsw Da Ene Aayjl

Condition: repair required (used), Year of construction: 2007, functionality: not functional, Screw compressor Atlas Copco GA250FF Dryer integrated 250 kW 9.75 bar 37.80 m3/min Year of manufacture: 2007 Main motor defective Fedpjzhu Najfx Aayopl Price: 9,000 EUR

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design Fpedpfx Aasyc Rvaoyel • Suitable for precision assembly and serial production Set includes: • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW Fsdpezznqkofx Aayepl 8.10 bar 26.04 m3/min Year of manufacture: 2010 Operating hours: 64,380 h

Condition: excellent (used), I am offering a used Atlas Copco Cobra PRO petrol-powered hammer. The unit is from 2014 and was manufactured in Sweden. The Cobra PRO model is a professional petrol-powered hammer designed for construction, roadwork, and demolition applications – it does not require electrical power or a compressor, making it ideal for outdoor use. The visual condition is as shown in the pictures – with normal signs of use, scratches, and scuffs. It is equipped with a working chisel. Specifications: Fjdpfszkwdlsx Aayspl Manufacturer: Atlas Copco Model: Cobra PRO Year of manufacture: 2014 Country of manufacture: Sweden Engine: 2-stroke petrol engine Application: concrete and asphalt breaking, roadwork, and earthmoving Mobile design – does not require a compressor or mains power.

Condition: excellent (used), Year of construction: 2020, S017015 PROD. ATLAS COPCO TYPE GA45 S/N API588534 YEAR 2020 Fodpfxezz Nndj Aayspl POWER (kW) 45 CAPACITY (m3/min) 8.3 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 2' DOCUMENTS no

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: BES041875, Thanks to its high impact frequency and reduced impact energy, it is primarily/ideally suited for use in track tamping or maintenance work. For driving rail spikes in wooden sleepers, driving pipes, posts, probes, and breaking concrete. Easy transport, short setup time, low emissions, low noise levels. HAPS (Hand and Arm Protection System). Fpjdpfjx Eb Udjx Aayjl