Used Atlas Copco Qax 30 for sale (386)

Condition: used, Year of construction: 2006, operating hours: 135,816 h, functionality: fully functional, Oil-free screw compressor Atlas Copco ZR160FF Integrated dryer. 160 kW 7.5 bar 28.20 m3/min Nwedpfx Anoyzxptjfof Year of manufacture: 2006 Operating hours: 135,816

Condition: excellent (used), Year of construction: 2018, operating hours: 27,910 h, functionality: fully functional, Tested oil-free screw compressor Atlas Copco ZR160VSDFF. Inverter and dryer integrated. 160 kW 10.40 bar 23.90 m3/min Year of manufacture: 2018 Only 27,910 operating hours Full service history Nwjdpfjxbh Ddjx Anfsf

Condition: repair required (used), functionality: unexamined, fuel type: diesel, Year of construction: 2017, operating hours: 1,154 h, Atlas Copco XAS 68 DDG compressor, year of manufacture 2017, 1,154 operating hours, volumetric flow 3.5 m³, emergency power 12.5 kVA, connections: 1 x 230 Volt, 2 x 400 Volt, serial no. YA3064303H0461812, axle bent, compressor otherwise fully functional, ABE/registration available. Njdpoy Aktajfx Anfewf

Condition: excellent (used), Year of construction: 2006, operating hours: 54,650 h, functionality: fully functional, Oil-free screw compressor Atlas Copco ZT22 Nwjdoyzm D Sopfx Anfof 22 kW 10 bar 2.72 m3/min Year of manufacture: 2006 Operating hours: 54,650

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Nwedpfxsxpww Ao Anfof Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 39,772 h, functionality: fully functional, Screw Compressor Atlas Copco GA160 160 kW 7.5 bar 30.20 m3/min Year of manufacture: 2017 Operating hours: 36,772 Nwodpfxeyzhccj Anfsf

Condition: like new (used), Year of construction: 2021, operating hours: 25,495 h, functionality: fully functional, Screw compressor Atlas Copco GA160VSD+FF. Integrated dryer and frequency converter. 160 kW, 8.3 bar, 33.10 m³/min. Year of manufacture: 2021. Operating hours: 25,495. Nwsdoyzg Eijpfx Anfjf

Condition: like new (used), Year of construction: 2021, operating hours: 23,369 h, functionality: fully functional, Screw Compressor Atlas Copco GA160VSD+FF Premium Inverter and dryer integrated. 160 kW 8.30 bar 33.10 m3/min Nedsyzgtyspfx Anfjwf Year of manufacture: 2021 Operating hours: 23,369

Condition: excellent (used), Year of construction: 2017, operating hours: 37,697 h, functionality: fully functional, Screw Compressor Atlas Copco GA132 Nodpfx Ajyym H Djnfjwf 132 kW 7.5 bar 25.40 m3/min Year of manufacture: 2017 Operating hours: 37,697

Condition: excellent (used), Year of construction: 2008, operating hours: 63,129 h, functionality: fully functional, Screw compressor Atlas Copco ZT75VSDFF Integrated inverter and dryer. Nwedjyycczjpfx Anfef 75 kW 8.75 bar 13.20 m3/min Year of manufacture: 2008 Operating hours: 63,129

Condition: new, Year of construction: 2026, overall weight: 227 kg, MANUFACTURER: ATLAS COPCO MODEL: G7FF Serial No: ITJ036731 Year: 2026 Power (kW): 7.5 Output (m³/min): 1.00 Pressure (bar): 10 Operating hours (documented/total): 0 Frequency inverter: NO Built-in dryer: YES – R513a 0.32kg Heat exchanger: NO Cooling (air/water): Air Mounted on tank: YES, 500L Nwedpfx Asy E Htbonfof Documents: YES New/Used: NEW

Condition: used, Year of construction: 1997, operating hours: 2,111 h, Field of application: Construction Drive: Wheel Empty weight: 880 kg Make of engine: Deutz Nwedpjymi T Ejfx Anfof Serial number: X0325104 Transport dimensions (LxWxH): 1.95x1.4x1.3 Please contact PFEIFER GROUP for more information

Condition: good (used), Year of construction: 2021, machine/vehicle number: AP I 275191, Offer 25447 Screw compressor with integrated dryer Technical specifications: - Operating hours: 13,598 h - Operating pressure: 12.75 bar - Delivery rate approx.: 21.7 l/sec Nedpfeyymm Rex Anfewf - Drive: 400 V / 7.5 kW - Motor speed approx.: 3,000 rpm - Air filter - Required space approx.: W 1,400 x H 1,600 x D 800 mm - Weight approx.: 270 kg

Condition: excellent (used), Year of construction: 2009, Atlas Copco BD1400 heat regenerating adsorption air dryer Manufacturer: Atlas Copco Model: BD-1400 CE 400V/50 Hz, PDP-40 Year of manufacture: 2009 Volume: 3120 liters Working pressure: 11 bar Nwsdpshl Sfdofx Anfsf Volume flow FAD: 1400 l/s / 5040 m³/h Voltage: 400 V / 50 Hz Power consumption: 32,5 kW Dimensions: approx. 2,720 x 2,639 x 2,548 mm Weight: approx. 4,500 kg The dryer incl. control were last in use and are in very good condition. The unit can be inspected by appointment in our warehouse in 76694 Forst.

Condition: excellent (used), Year of construction: 2016, operating hours: 23,511 h, functionality: fully functional, Water-cooled dryer Atlas Copco FD510 30.60 m³/min Njdpfx Asx Sx U Dsnfjwf Year of manufacture: 2016

Condition: excellent (used), Year of construction: 2021, operating hours: 2,380 h, functionality: fully functional, overall weight: 268 kg, total length: 1,100 mm, total width: 650 mm, total height: 1,450 mm, power: 5.5 kW (7.48 HP), pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, Atlas Copco GA5 VSD + FF oil-injected screw compressor with approx. 5 kW output, max. 12.75 bar pressure and approx. 1.1 m³ of compressed air per minute, including air dryer and separate 500-litre storage tank (pressure tank), manufactured by OKS, both built in 2021, and a condensate pump. The unit was used for only approx. 3.5 years in a bakery for simple pneumatic applications and for cleaning purposes, approx. 2,380 operating hours, 96% of which were in the 40–60% speed range; first commissioned: August 2021 (was only used regularly until around May 2024). Original price of the system excluding installation: approx. €12,000 net. This screw compressor is one of Atlas Copco’s most energy-efficient compressors, the first choice for low lifecycle costs. VSD (Variable Speed Drive) technology automatically regulates the motor speed based on actual compressed air demand, enabling energy savings of 35–60% on average compared to fixed-speed compressors, depending on the compressed air consumption profile. Nedpeyvtxxofx Anfewf Very good condition, see also photos. Available immediately. Price: € 6,950 net ex-warehouse

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 compressor 3.7 m3/min Nwodpeiywpzjfx Anfof Number of hours: 2,371 h Deutz engine Type: diesel

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). JAB Hydraulic Breaker / Hammer / MS03 / in stock & immediately available Price: €3,690.00 net / €4,391.10 gross - Weight (kg): 336 - Length with chisel (mm): 1,500 - Chisel diameter (mm): 70 Equipment: - incl. MS03 adapter plate Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various attachments in our warehouse, all immediately available! Mr. Herden (phone) will be happy to assist you. Upon request, we will gladly provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. Nsdoyxadmopfx Anfjwf We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: JW10GC = More information = Intended use: Construction Unladen weight: 336 kg Please contact Marius Herden for further information.

Condition: ready for operation (used), Year of construction: 2013, Atlas Copco screw compressors – with inverter Nwsdpfx Aney Dr H Dofef

Condition: used, Year of construction: 1997, operating hours: 1,904 h, Field of application: Construction Nsdjyi R Tlspfx Anfowf Drive: Wheel Empty weight: 880 kg Make of engine: Deutz Serial number: YA3-606236-00270916 Transport dimensions (LxWxH): 1.95x1.4x1.3 Please contact PFEIFER GROUP for more information

Condition: like new (used), Year of construction: 2019, operating hours: 36,285 h, functionality: fully functional, Premium second-hand Atlas Copco GA315VSD: 315 kW with 8.5 bar and 58.50 m3/min. Year of manufacture 2019 with only 36,285 operating hours. Excellent condition. Nwsdpfx Aeuzfv Eenfjf

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Nwsdpfxjyg H Tcj Anfjf

Condition: ready for operation (used), Year of construction: 2006, MAKE: ATLAS COPCO MODEL: GA45 FF Serial no.: API591201 Year: 2006 Power (kW): 45 Output (m3/min): 7.28 Pressure (bar): 7.8 Operating hours (load/total): 8054/20214 Frequency inverter: no Built-in dryer: yes Nwedpfxey Aux Te Anfef Heat exchanger: no Cooling (air/water): air Mounted on tank: no Connection: 2'

Condition: used, functionality: unexamined, machine/vehicle number: ETD MT41, Used Atlas Copco ETD MT41 electric torque screwdriver (Transducerized MicroTorque Driver) Manufacturer: Atlas Copco Njdpjynhpbjfx Anfowf Model: ETD MT41-150-i06 In original packaging. Multiple units in stock.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 48,000 h, functionality: fully functional, pressure (max.): 12.5 bar, type of cooling: water, Equipment: type plate available, well-functioning variable speed screw compressor, water-cooled Njdpfx Aneykuqwsfjwf