Used Austria for sale (1,114)

Condition: used, mileage: 24,403 km, power: 400 kW (543.85 HP), first registration: 06/2023, fuel type: electric, maximum load weight: 14,100 kg, overall weight: 27,000 kg, axle configuration: 6x2, wheelbase: 4,600 mm, color: silver, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: air, loading space volume: 46 m³, loading space length: 7,360 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, Year of construction: 2023, Equipment: air conditioning, cruise control, tail-lift, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle's location applies. Predictive Powertrain Control, air-suspended front axle, front axle 8.0 t, trailing axle, 7.5 t, steered, load-reducing, liftable, air suspension, rear axle, axle load measuring device, light alloy wheels, tire pressure control, M-cab, M-cab, cab width 2.30 m, air deflector, lockable, exterior sun visor, transparent, front mirror, heated, LED daytime running lights, roll stability assistant, bunk, lower, sunblind, side, driver and passenger side, multimedia cockpit, interactive, automatic climate control, driver's comfort seat, rain sensor, automatic high/low beam and cornering lights, lane keeping assist, distance control assist, attention assist, traffic sign assist, blind spot assist, airbag, driver, cruise control, body by Kiesling, LBW Bär, 1500 kg, 1800 sheets, cooling: Frigoblock FK 25i, Cool-Slide partition, aluminum checker plate floor, box with side door on the right, rear portal doors NLA-Lift steerable, reversing camera, tachograph V 4072, dated 28.11.2022. Bdedpfxszviiws Al Uog

Condition: new, empty load weight: 123 kg, maximum load weight: 627 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, suspension: other, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004184 Bodoir H Suopfx Al Uodg The UNITRAILER Garden Trailer 201 TILT car trailer, with a maximum permissible weight of up to 750 kg, features a folding rear gate, allowing for loading and unloading in just a few minutes! Thanks to the use of a tilting drawbar, it can be positioned vertically on the rear gate at any point. All formalities related to the purchase will be handled for you. The ordered goods, along with the accompanying documentation, will be delivered to the address you specify in Germany/Austria within 3 to 5 business days. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will be towing the trailer. Technical specifications of the Garden Trailer 201 TILT car trailer: CHASSIS - Steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-drawbar, which can be folded under the trailer floor at any time BODY - Supporting frame made of hot-dip galvanized sheet steel Curved profiles are used with screws Loading area: non-slip and water-resistant screen-printed floor panel, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel We deliver car trailers directly to your home. Delivery costs will be charged separately.

Condition: new, functionality: fully functional, power: 18.8 kW (25.56 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,740 kg, lifting height: 3,283 mm, tire size: 31x15,5x15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, fuel: diesel, Equipment: additional headlights, adjustable boom, all wheel drive, cabin, head guard, pallet forks, standard shovel, H&R Telehandler 2512T – The compact wheel loader for versatile applications with an enclosed cab for greater comfort. Advantages of the H&R Wheel Loader 2512T Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its weight and a lifting capacity of 1200 kg, the H&R wheel loader has a relatively small turning circle. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments, such as the standard bucket or the manually adjustable pallet fork. Expandable functions: Use the additional hydraulic control circuit to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2512T Telehandler • Fully equipped • Extensively optimized in Germany • Telescopic boom for a greater reach • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Comfortable cab with heating, ventilation, and radio (MP3 and USB) for extended working hours • Joystick with electric gearshift for precise control • Additional control circuit for attachments such as mowers, bale grabs, snow plows, etc. • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB port for entertainment while working • Rearview camera with display in the interior Bdsdjrhgn Sjpfx Al Uog • Trailer hitch for additional trailer use • 220V cooling water preheater for reliable cold start capability and increased engine life • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • Ideal for agriculture and construction and industry • CE-compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €21,845.00 VAT: €4,150.00 Gross: €25,995.00 Financing available! Optional Road registration / operating permit: €595 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei DEF20CFF4 Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting capacity: 1200 kg Lifting height: 3283 mm (bottom edge of standard pallet fork) Unloading height: 2753 mm (standard bucket tipped) Lifting capacity: 1200 kg Wheelbase: 2.17 m Tires: 31×15.5-15 AS Dimensions: 3850 x 1610 x 2460 mm Weight: 2740 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, empty load weight: 2,150 kg, lifting power: 980 kg/m, lifting height: 2,500 mm, tire size: 31X15,5-15, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,500 mm, Year of construction: 2025, fuel: diesel, load capacity: 980 kg, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, pallet forks, standard shovel, trailer coupling, The H&R 2210-B35 wheel loader (wide track) – a compact loader with a wide track for greater stability. The new 3-cylinder Perkins Turbo engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With its 2-stage hydrostatic drive, the 2210 B35 compact loader is fast and easy to drive at speeds of approximately 16 km/h. Thanks to the large steering angle of 42° and the small turning circle, it is ideal for use on small areas. The farm loader comes standard with pallet forks and a standard bucket, so you can start working immediately. The 3- and 4-way hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient front-end tool changes. With its high lifting capacity, the HR 2210 loader can lift even heavy loads of up to 980 kg to a height of 2.53 m. Thanks to the standard 31x15.5-15 wide tires, it is particularly stable. The electric gear on the joystick makes operating the HR 2210-B35 particularly comfortable. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2210-B35 Wheel Loader • Fully equipped • Wide track for greater stability • Extensively optimized in Germany • Includes manually adjustable pallet forks • Includes standard 150 cm bucket • Comfort cab with heating, ventilation, and radio • Rearview camera with display • Joystick with float position and electric gear • Auxiliary hydraulics for front-mounted implements, 3rd and 4th control circuits • Hydraulic oil cooler • Brake inching pedal • Trailer hitch for trailer use • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5-15 • Adjustable steering column and seat • Hour meter and fuel gauge • CE compliant according to the EU Machinery Directive • 1-year spare parts warranty Price Net: €22,945.00 VAT: €4,359.55 € Gross: €27,304.55 Financing available! Optional 2-year warranty €590 TÜV road approval / operating permit for work machine €595 Transport to Germany and Austria for an additional charge Technical specifications Engine: 3-cylinder Perkins Turbo (25 HP) Lifting capacity: 980 kg Lift height: 2530 mm (bottom edge of standard pallet fork) Unloading height: 1956 mm (standard bucket tipped) Lift time / lowering time: 4.0 / 3.5 seconds Dimensions: approx. 3380 x 1496 x 2340 mm Weight: 2160 kg Bucket width: 150 cm Bdodporhh Sqofx Al Uog Tires: 31x15.5 -15 Spare parts and accessories are available from us. Please provide your telephone number when making inquiries!

Condition: new, empty load weight: 131 kg, maximum load weight: 614 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,006 mm, loading space width: 1,063 mm, loading space height: 700 mm, Year of construction: 2024, operation weight: 750 kg, Tiltable 750 kg car trailer UNITRAILER Garden Trailer 200 KIPP with additional drop sides, support wheel and flat tarpaulin The Garden Trailer 200 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 3 to 7 working days. Once you have received the car trailer, all you have to do is register it. advantages of a Garden Trailer 200 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. Bdjdpfx Ast Id Nvol Ueg The Garden Trailer 200 KIPP car trailer is made of galvanized steel and is therefore rust and weatherproof. If you only store your car trailer outdoors, we recommend that you purchase a flat cover to protect your trailer. The entire structure is reinforced by two support beams fitted under the floor to support the loading area. The tiltable drawbar allows free tilting, making loading and unloading very easy and extremely time-saving. To meet the expectations of our customers, we offer this trailer model with a tilting drawbar at an exceptional price. Thanks to this, you can safely transport building materials, furniture or special equipment. You can remove the rear dropside at any time by pulling it off the brackets and gain much more space in a matter of seconds. From now on, you can transport many more things at once.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, laser power: 150 W, input voltage: 230 V, type of cooling: water, warranty duration: 12 months, shaft length: 10,700 mm, Equipment: CE marking, cabin, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine from our showroom with 150 watts of laser power Delivery time: immediately available ----- Switch on and get started ----- ----- Machine with only approx. 10 operating hours ----- ----- Year of manufacture: 2025 ----- Professional machine ----- - incl. Windows 11 PC system / monitor / keyboard / mouse - includes installed cutting and engraving software in German - coordinated and ready for immediate use - The machine is capable of very fine engraving as well as precise cutting of thick wood or acrylic glass. - Machine was only used for demonstration purposes - Very versatile cutting machine. - Cuts wood up to 20mm thick - Cuts acrylic glass and many other plastics - Cuts fabrics, non-woven materials, etc. - Cuts rubber mats - Engraves on wood, concrete, stone, many plastics - Production of stamps - Heavy-duty industrial quality - Travel range 1300 x 900mm - Drives with hybrid servos - Linear guides on all axes - RECI laser tube with 150 watts peak power - incl. honeycomb table insert (removable / extendable) - incl. knife table (removable / extendable) - Sheets up to approx. 20mm thick can be pushed through the machine. - Continuous processing possible - incl. generously sized laser cooler - incl. generously sized extraction system - Very easy to operate. - Machine control in German - Machine controller in German, with large color display - Very reliable data transmission with USB and network cable - No hassle with the trade supervisory authority - We have all spare parts and wear parts in stock Please also note our favorable leasing/hire purchase offers. Bdodpfofkgq Asx Al Uog Sales are exclusively to commercial businesses. Delivery / advice / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 200cm Height: 125cm Depth: 150cm Shipping weight: approx. 600kg

Condition: new, - Sturdy steel and cast iron construction - Dynamically balanced milling unit anchored to the work table - Especially robust design - Smooth operation thanks to precision assemblies and high intrinsic weight - Standard with reversing function (left/right rotation) and electronic interlock when changing direction - Five speeds from 3,000 to 10,000 rpm - Speed change is easily and conveniently operated from the machine side - Standard with MK 4 quick-change spindle system - Large cast iron work table for long-term precision - Easy handling via control elements and speed display located at the front of the machine - Large dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numeric display of the set spindle height, accurate to 0.1 mm - Powerful industrial motors This product comes with a 3-year Stürmer warranty upon online registration. Warranty applicable to end customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3-Po Box 168, 36016 Thiene-Vicenza, Italy Bjdpfeu T Hhkex Al Uedg Dimensions and Weights: - Net weight approx.: 510 kg Dust Extraction Connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of extraction ports on fence: 1 - Extraction port diameter on fence: 120 mm Work Table: - Work table length: 2,500 mm - Work table width: 810 mm - Table height: 923 mm Placement Information: - Space requirement explanation: Dimensions take into account the maximum travel ranges or usable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the specified measurements to the space requirement to obtain the recommended free installation area for the machine. Equipment: - Milling fence: Heavy-duty professional version with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with numeric digital display - Curved milling safety hood - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual adjustment of milling unit height and tilt - Control element position: located on the machine body - Table configuration: table extension on left and right, and pull-out workpiece support (total width 2,500 mm) Electrical Data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Milling Spindle: - Spindle tilt: -45 to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30–35 mm / for spindle Ø 40–50 mm - Milling spindle stroke: 90 mm - Quick-change spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. Milling Tool Diameter: - Max. tool diameter (lowerable): 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Condition: new, - Large jointer tables made of cast iron - The jointer table adjustment is controlled via a precise parallelogram system, ensuring that the distance from the table tips to the cutterhead remains constant in every position - The large, stable fence made of anodized aluminum is easily movable and tiltable from 0° to 45° - The fence angle is readable from the working position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision engineering and heavy cast construction - Powerful industrial motor - Maximum user safety combined with the simplest operation - Chip removal display via scale - Manual table adjustment - Motor protection switch Equipment Details -Includes foldable auxiliary fence for narrow workpieces -Manual quick adjustment for chip removal with scale and rotating knob Safety Guard -The safety guard is foldable and designed to provide operator protection without hindering work TERSA Models with Tersa Cutterhead System -No setting or screwing required -Cutter knives can be changed in seconds -Self-locking Bodpfxju T Hrco Al Usdg -Especially quiet operation -Perfect planing results This product comes with the 3-year Stürmer warranty upon online registration. Warranty only applicable to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 - PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weight: - Product length approx.: 2750 mm - Product width/depth approx.: 1500 mm - Net weight approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. depth of cut on jointer: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Connection for extraction: - Extraction port diameter: 120 mm Setup Information: - Footprint length: 2750 mm - Footprint width/depth: 1604 mm - Footprint explanation: Dimensions reflect maximum travel or usable lengths. Electrical Data: - Main motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,470 kg, lifting power: 1,200 kg/m, lifting height: 2,489 mm, tire size: 31x 15,5 - 15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 04/2025, emission class: euro5, digging bucket width: 1,600 mm, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, H&R 2412 – The compact wheel loader for versatile applications with an open cab Advantages of the H&R 2412 loader Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its high weight and a lifting capacity of 1200 kg, the H&R wheel loader remains extremely maneuverable with a relatively small turning circle – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the included standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2412 • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • LED work lights • Trailer hitch for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • Includes 1-year spare parts warranty Price Net: €18,680.00 VAT: €3,549.20 Gross: €22,229.20 Bdedpjwd I Epefx Al Ueg Financing available! Optional Road registration / operating permit: €695 Extended warranty (2 years): €590 Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting height: 2489 mm (bottom edge of standard pallet fork) Unloading height: 2023 mm (standard bucket tipped out) Lifting capacity: 1200 kg Wheelbase: 2173 mm Dimensions: 3740 x 1600 x 2460 mm Weight: 2400 kg Tires: 31×15.5-15 Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,740 kg, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescopic, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, standard shovel, The H&R 1507T telescopic wheel loader is our smallest telescopic yard loader – perfect for tight work spaces. With a lifting capacity of 700 kg, the H&R 1507T telescopic loader lifts loads of up to 700 kg to a height of 2.82 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1507T loader reaches speeds of approximately 16 km/h and is comfortable to drive. The additional hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-end tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machines have a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1507T Telehandler • Technical and visual optimization in-house • Efficient engine made in Germany • Telescopic boom for greater reach • Ideal for tight work spaces • Includes standard 120cm bucket • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake inching pedal • Open cab and safety bar with removable canopy • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant (EU Machinery Directive) and approved by the German Road Traffic Licensing Regulations (STVZO) • 1-year spare parts warranty Price Net: €17,710.00 VAT: €3,364.90 € Gross: €21,074.90 Financing available! Optional 2-year warranty €590 net Pallet fork €650 net TÜV (road approval) €870 net Transport to Germany / Austria upon request Technical specifications Lifting capacity: 700 kg Lift height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 3805 x 1160 x 2235 mm Weight: 1740 kg Bdsdpfx Alov T T N Tj Ueg Tires: 26 x 12.00-12 Turning radius: 4.3 m Accessories and Spare parts are available from us. Please provide your phone number when you inquire!

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min Bjdovmtlhspfx Al Usdg - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: used, Small sawmill CTR550, year 2018, good condition, 4 kW, 3600 mm cutting length. Price changes reserved, errors, misprints and typesetting mistakes reserved. Bedpfx Aowzzfqel Uedg

Condition: used, Drilling machine Optimum B32, good condition, incl. MK4 mounting, 225 mm stop, 125 mm quill stroke Bjdpfxewzzghs Al Uodg Price changes, errors, and typographical mistakes reserved.

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Bjdpfxjwzzivj Al Ujdg Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, table length: 2,070 mm, table width: 1,070 mm, working length: 2,000 mm, working width: 1,000 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 100 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Offered here is a high-precision laser cutting machine with 3000-watt laser power Model: LG-1020/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching system (pressure and gas type controllable via software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory bricks (chamotte) - Machine bed and axes measured and calibrated with Renishaw interferometer Our goal is to offer the best, most stable, and cost-effective laser machines currently available on the market. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included, as well as premium on-site support. Please also take note of our attractive leasing/financing offers. New machine, delivery time approx. 6-8 weeks Bdjdpfx Ajyacwkjl Usg We are happy to demonstrate the machine at our facility. Travel range: approx. 1000 x 2000 mm Table size: approx. 2070 x 1070 mm (i.e. the machine accommodates a small-format sheet) Sliding cutting table For high-precision metal cutting Fully installed and calibrated Cutting software in German incl. nesting module Very easy to operate Switch on and start working Laser source from Max Photonics (G5/German version) with 3000 watts output Comprehensive electronic and mechanical collision protection systems for the cutting head Large laser protection window in the front door Automatic front door Safety light curtain for maximum operator protection Cuts stainless steel up to 12 mm Cuts steel up to 22 mm Cuts aluminum up to 12 mm Cuts brass up to 5 mm Heavy industrial quality Complete system / ready for immediate operation LED work area lighting 200mm duct connection for fume extraction incl. extraction fan Leasing or financing available through our financing partner Require different power or table size? No problem, we have several machines in stock or available at short notice. Sales exclusively to commercial customers. Delivery/advice/sales only in Germany/Austria/Switzerland Machine dimensions approx.: Width: 3.6m, Height: 2.1m, Depth: 3.3m Weight: approx. 2.5 tons

Condition: new, Package size: 5 pieces Holzprofi sanding belts, suitable for many different machines from all manufacturers! These top-quality sanding belts deliver excellent results when working with wood and various metals. Thanks to the fully synthetic resin-bonded, semi-open coating and the antistatic properties, they are particularly efficient and durable. Advantages: - High-quality sanding belts for professional use - Fully synthetic resin-bonded for long service life - Semi-open coating and antistatic for best sanding results - Extra-strong backing material for high resistance - Suitable for all types of wood and various metals High quality – Made in Austria! Areas of application: These belt sanding belts are ideal for carpenters, turners and DIY enthusiasts who need a reliable and powerful solution for their sanding work. The following lengths are available: 5900x150mm, suitable for Holzprofi Austria BS220, among others 6150x150mm, suitable for Holzprofi Austria BS220A, among others 6440x150mm, suitable for Holzprofi Austria BS250 and BS220B, among others 6800x150mm, suitable for Holzprofi Austria BS250A, among others 7000x150mm, suitable for Holzprofi Austria BS250B, among others Grit sizes: K40 K60 K80 K100 K120 K150 Prices from 12.00 euros Prices depend on length and design All other sizes are also possible! Bsdpfezq Dfpsx Al Uedg If you have any questions about the correct length for your machine, please contact us, we will be happy to help. Tel.: 00 43 7613 5600

Condition: new, Holzprofi Circular Saw Blade, Circular Saw Blades in Various Diameters and Tooth Counts Made in the EU The Holzprofi saw blades are extremely durable and of carpenter quality – ideal for professional woodworking businesses as well as for DIY enthusiasts. Advantages and Features: - High-quality carbide saw blade for precise and clean cuts - Long service life and high durability thanks to high-strength and large carbide saw teeth, allowing for more frequent resharpening Suitable for machines from many different manufacturers. If you have any questions, we will be happy to help! Available circular saw blades: SB200: Diameter: 200mm Bore: 30mm Tooth count: 48 / 60 SB216: Diameter: 216mm Bore: 30mm Tooth count: 24 / 48 SB220: Diameter: 220mm Cutting width: 2.6mm Bore: 30mm Tooth count: 14 SB250: Diameter: 250mm Bore: 30mm Blade body: 2.8mm Cutting thickness: 3.2mm Tooth count: 24 / 40 / 48 / 60 / 60 (ALU) / 80 SB250-60TFZ-N-ALU: Diameter: 250mm Bore: 30mm Tooth count: 60 SB300: Diameter: 300mm Bore: 30mm Tooth count: 20 / 28 / 48 / 60 / 72 / 72 (ALU) / 96 SB300-72TFZ-N-ALU: Diameter: 300mm Bore: 30mm Tooth count: 72 SB305-60N (suitable for SRO305): Diameter: 305mm Bore: 30mm Thickness: 2.2mm Blade body: 2.8mm Cutting thickness: 3.2mm Tooth count: 60 SB315: Diameter: 315mm Bore: 30mm Blade body: 2.8mm Cutting thickness: 3.2mm Tooth count: 28 / 48 / 60 / 80 SB350: Diameter: 350mm Bore: 30mm Tooth count: 32 / 54 / 72 / 84 SB400: Diameter: 400mm Bore: 30mm Tooth count: 28 / 36 / 48 Negative / 96 Bdsdpfx Alezrlnno Ujg SB450: Diameter: 450mm Bore: 30mm Tooth count: 32 / 40 / 56 / 72 Prices from 48.00 Euro Prices depend on diameter and design If you have any questions about the correct size for your machine, please contact us; we will be happy to help.

Condition: new, The Holzprofi sanding belts are compatible with many different machines from all manufacturers! The Holzprofi Diamond Flex wide belt is the ideal solution for high-quality sanding applications. Specifically developed for use in wide belt machines, this sanding belt offers optimal performance and durability. With its resin-bonded, semi-open grit and antistatic coating, it ensures efficient sanding and minimizes dust formation. The extra-strong backing material guarantees a long service life and is ideally suited for processing all types of wood as well as various metals. Advantages: - Efficient sanding performance and long service life - Reduced dust thanks to the antistatic coating - Versatile for use with wood and metal - Robust backing material for high stress High quality – Made in Austria! The following lengths are available: DFN 1030x1900 DFN 1120x1900 DFN 410x1900 (only K60, K80, K100) DFN 457x1003 DFN 650x1900 DFN 650x1600 DFN 650x2200 DFN 930x1900 (only K60, K80, K100, K120) DFN 950x1900 Grit sizes: K60 K80 K100 K120 K150 All other sizes are also possible! Bdodpfxszrlq Aj Al Ujg Prices from €18.00 Prices depend on length and design If you have any questions about the correct length for your machine, please contact us, and we will be happy to help. Tel.: 00 43 7613 5600

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6232-07-012, type of input current: AC, total width: 4,100 mm, total length: 4,400 mm, input voltage: 400 V, input current: 380 A, feed length X-axis: 3,200 mm, feed length Y-axis: 3,500 mm, working width: 3,200 mm, total height: 1,400 mm, cutting width (max.): 3,200 mm, cutting height (max.): 3 mm, compressed air connection: 8 bar, Innsbruck, May 19, 2026 Bdodpfxozuzime Al Usg Good condition: Used S.M.R.E. SM-320-TA High-Performance CNC cutting plotter (year of manufacture 2012) Are you looking for maximum precision and efficiency for XXL cutting? For sale is a high-performance, industrial conveyor cutting machine from the premium manufacturer S.M.R.E. (SolarEdge Automation Machines). The machine is in very good, ready-to-use condition and is ideal for the continuous processing of technical textiles in large formats. The most important highlights at a glance: Year of manufacture: 2012 Working width: 3,200 mm, table length 3,500 mm – perfect for XXL formats without material division Conveyor system: Robust, multi-layered industrial conveyor belt for automatic, endless material feed Drive & Performance: Powerful 8 kW rated power (400 V) for fast and precise cuts Equipment: Vacuum system for perfect material hold, automatic unwinder with precise material guidance correction, and flexible tool heads (including drag/rotary knives and a marking pen). Location: Innsbruck/Austria Perfectly suitable for: Manufacturers of truck tarpaulins, tents, awnings, advertising banners, pool covers, and sophisticated technical products. Take the opportunity to bring your production to the next level with this modern, extremely reliable system. Ready for immediate use! Dismantling and transport of the machine must be organized and paid for by the customer. Technical information: Cutter IBK Cutting window X 3,500 mm Y 3,200 mm Connection values: 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 30 kW 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 15 kW 1 x 230 VAC 50 Hz 200 W 1 x Oil-free compressed air 0.6 MPa 400 l/min Dimensions: Cutter L x W 4,400 x 4,100 mm Unwinder 1 approx. 2,500 x 4,000 mm including material roll Unwinder 2 approx. 2,000 x 4,000 mm including material roll Safety area all around 1,000 mm => Installation area approx. 11 x 6 m + maneuvering/working area Weight: approx. 2.5 tons

Condition: used, mileage: 224,000 km, power: 330 kW (448.67 HP), first registration: 06/2024, fuel type: diesel, maximum load weight: 15,960 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, color: other, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, Year of construction: 2024, Equipment: ABS, air conditioning, traction control, trailer coupling, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted at the current daily rate. The currency of the vehicle’s location applies. Waste heat recovery system, engine OM471, R6, 12.8 l, 330 kW (449 hp), 2200 Nm, high-performance engine brake, axle configuration 6x2 ENA, front axle with air suspension, trailing axle, 7.5 t, unladen, liftable, cable remote control for air suspension, tire pressure monitoring system, parking brake, electronic, wheelbase 4900 mm, fuel tank 330 l aluminum, auxiliary tank 430 l aluminum, AdBlue tank 75 l, trailer coupling, L cab, L cab, cab width 2.50 m, StreamSpace, air horn, locking system, with central locking, comfort locking system, roll control assistant, leather steering wheel, comfort bed, top, wide, adjustable, comfort bed, bottom, electric auxiliary air conditioning, automatic climate control, electronic braking system with ABS and ASR, illuminated Mercedes star, rain sensor, headlight cleaning system, lane-keeping assist, distance control assist, attention assist, traffic sign assist, the vehicle is currently in use. Mileage may change. Bdjdpfszu T Stox Al Ujg

Condition: like new (used), Demonstration machine The CTR1000H80 band saw with an 80 mm saw blade for even cleaner cuts and higher yield. Extra strong, solid, and durable sawing unit for log diameters up to 1000 mm. Soft starter included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. CE certified. Advantages and features: - Saw head suspended on both sides for greater stability and better precision. - 8.4-inch touchscreen LCD for quick and precise height adjustment. - With telescopic lever log turner and log lifter for easy log manipulation. - Log lifter with drive for horizontal log feed. - 5 swiveling hydraulic angle stops. 2 log clamping tools. - Hydraulic saw blade tension for quick adjustment. - Electrically adjustable saw blade guide and automatic coolant pump for high operator comfort. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 375 mm Cutting length of the base section: 7.5 m Length of the extension section: 3 m Bdsdpfezqrm Isx Al Usg Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Stroke motor: 0.55 kW Motor of the hydraulic unit: 5.5 kW

Condition: used, machine/vehicle number: 008519, Type of edging: Thin edge, Thick edge Gluing System: PUR, Laser Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Bsdpfx Ajzruytsl Usdg Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: used, mileage: 469,800 km, power: 330 kW (448.67 HP), first registration: 12/2018, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2027, gearing type: automatic, emission class: euro6, total length: 9,300 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Mercedes-Benz AROCS 3245 – ROLLER TIPPER – VDL – LEAF SPRING – A/C – VEHICLE HISTORY * 1st Owner * Well-maintained! * German vehicle * Video of the vehicle available upon request (interior & exterior views) ----Vehicle Data Manufacturer: Mercedes-Benz * Model: Arocs 963-8-G * Vehicle Class: N3G (Off-road vehicle) * First Registration: 06.12.2018 * Emission Class: Euro VI C * Fuel: Diesel * Engine Capacity: 12,809 cm³ * Power: 330 kW (449 hp) * Automatic Transmission * Mileage: 469,800 km * Operating Hours: 10,550 h Weights & Dimensions Permissible Total Weight: 36,000 kg * Technically Permissible Total Weight: 40,000 kg * Permissible Total Train Weight: 44,000 kg * Trailer Load (braked): 35,000 kg * Maximum Speed: 90 km/h Chassis & Axles Axle 1* Leaf spring suspension * Tires: 385/65 R22.5 Axle 2* Leaf spring suspension * Tires: 385/65 R22.5 Axle 3* Leaf spring suspension * Twin tires * Tires: 315/80 R22.5 Axle 4* Leaf spring suspension * Twin tires * Tires: 315/80 R22.5 Superstructure Roller Tipper * VDL Container System * Type: S-30-5900 * Year of Manufacture: 11/2018 * Serial Number: 39441 * Maximum Load: 30 t * Maximum Working Pressure: 350 bar * Hydraulic under-ride protection Trailer Coupling * Ringfeder trailer coupling Drivetrain & Technology * Auxiliary Drive (PTO) * Limiter * Speed Adjuster * Fleetboard EcoSupport Comfort Features Air Conditioning * Auxiliary Heater * Seat Heating * Navigation System * Electric Windows * Heated Exterior Mirrors * Sunroof (manual) Safety & Assistance Systems Hill Start Assist * Differential Locks * Rocker Arm System ----EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATES AND 17 - 21 DAYS AUSTRIA LICENSE PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA THE EMAIL FUNCTION Bdsdpfx Ajzqxdajl Usg VERBAL RESERVATIONS ARE NOT VALID! A deposit of at least 500.00 € / 1,000.00 € will be charged for sales to EU and third countries. Changes, errors and prior sale reserved! You can find more vehicles on our website: Sales are exclusively subject to our terms and conditions - see website. Important note - Important information: Despite careful checking of all details in our offer, it may happen that errors occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, mileage: 24,953 km, power: 330 kW (448.67 HP), first registration: 04/2022, fuel type: electric, maximum load weight: 10,098 kg, overall weight: 19,000 kg, axle configuration: 4x2, wheelbase: 5,500 mm, color: silver, driver cabin: day cab, gearing type: other, emission class: euro6, suspension: air, Year of construction: 2021, Equipment: air conditioning, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle's location applies. Front axle with air suspension, air suspension, rear axle, axle load measuring device, tire pressure monitoring system, wheelbase 5500 mm, M cab, M cab, cab width 2.30 m, MirrorCam, locking system, with central locking, comfort locking system, roll control assistant, leather steering wheel, electric auxiliary heater, automatic climate control, driver's comfort seat, comfort features, illuminated Mercedes star, lane keeping assist, distance control assist, attention assist, blind spot assist, front ride height 1.21 m and rear ride height 1.23 m. Bdedjzviikopfx Al Ueg

Condition: excellent (used), machine/vehicle number: 9FBM70T-10071, Year of construction: 2022, operating hours: 133 h, lifting height: 4,700 mm, free lift: 1,760 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, Battery: Year of manufacture 2022 Lifting capacity: 7.000 kg Maximum passing height: 290 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Austria GmbH Toyota Material Handling for more information = Additional options and accessories = Bsdpfx Alezt Hnro Ujdg - Free lift