Used Automatic Cleaning System for sale (52,009)

Year of construction: 2009, condition: excellent (used), Cleaning system is fully functional. Working dimensions: diameter 800mm, working height 600mm Tank volume: 90L Options: Automatic cleaning or with washing brush Interior lighting Design / Accessories: Direct drive for the washing basket Mist extraction Low water level protection / level control Lid locking Weekly timer Chip/particle filter with bath cover plate 5 ECO rinse (fresh water) for minimal water consumption with machine-side hot water preparation Three-dimensional cold air blow-off Oil skimmer Drainage device / bottom flush Redozkkb Depfx Abuech with pump in gray cast iron and galvanized pipe system Hose connection and tap valve in aluminum/plastic

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug) Rjdpfx Abefbt Siouoch

Year of construction: 2020, operating hours: 12,542 h, condition: used, 1. Continuous cleaning system, manufacturer: PERO AG, year of manufacture: 2020, mains connection: 400V, 50Hz, rated current 241A, system for cleaning various stamped parts, machine consists of various rinsing tanks, nozzles, and conveyor belts, various rinsing baths and nozzles for degreasing, and conveyor belts for transfer, 3 motors, manufacturer: Dietz, 1.7kW, 1 motor, manufacturer: Dietz, 1kW, 3 motors, manufacturer: Lowara, 3-3.28 kW, 1 motor, manufacturer: SEW, 0.37 kW, 2 motors, manufacturer: Elektror, 4 kW, 2 motors, manufacturer: Küenle, 0.55 kW, machine hours: 12,542, average utilization: 85%, last documented maintenance: 02/12/2025, system generally operational, follow-up work has been carried out. Redpfs Aa Agbjx Abujch

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Rcodpfx Abjzwccmoujh Supply rate: max. approx. 250 L/min. at approx. 3.5 bar water pressure Overflow to the filter system is provided on site, air- and foam-free. Maximum temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply: max. 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: fully automatic full-flow filtration Sludge discharge: fully automatic, with consistent solid content The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. The sludge is pre-dried in the upper section of the scraper. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Maximum volume: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without railing, without internal access rungs Maximum volume: approx. 0.55 m3 191026ä

Condition: new, Year of construction: 2026, Maximum cutting diameter 400 mm Maximum rectangular cross-section 400 × 400 mm Band dimensions 3860 × 34 × 1.1 mm Band speed 27 / 45 / 69 m/min Speed ​​regulation Stepless (3 ranges) Power supply 400 V Main motor power 4 kW Drive type Mechanical transmission + hydraulic system Machine type Automatic band saw Design Column-type Vise Hydraulic Material feed Automatic, hydraulic Control Automatic (battery mode) Feeding accuracy ±0.20 mm Cooling Coolant system (flood) Belt cleaning Wire brush Machine dimensions (L × W × H) 2400 × 2380 × 1800 mm Rodpfxozr I T Ho Abusch Net weight 2100 kg Gross weight 2300 kg

Condition: used, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80m Continuous washing systems from the manufacturer Hinst are designed to process large quantities of series parts while meeting the highest cleanliness requirements. 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets in the size 48.5 x 48.5 cm) on a transport system. Via an integrated roller conveyor or a modular belt conveyor, the parts are automatically fed into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they go through various separate treatment zones in sequence: - Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray bar) to remove oils, greases, and chips. - Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. - Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts emerge completely dry and clean at the other end of the machine. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater flowing down is cleaned via filter systems (to collect chips and dirt) and oil separators and then pumped directly back into the cycle to conserve resources. This tunnel design (the system measures a proud 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture: 12/2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m Rcedsg Ipp Ajpfx Abujh including: - 6 baskets: basket dimensions: 48.5 x 48.5 x H26 cm - roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2025, condition: new, functionality: fully functional, Available from Swiss warehouse, immediate delivery! 24-month warranty Payload: Cleaning area: D = 800 mm Internal height: 530 mm Load weight: 150 kg Machine body, internal piping system, control cabinet, and wash basket made of stainless steel - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid locking - Removable filter sheet Accessories: Swath extraction Automatic level replenishment Oil skimmer, WE version Pumping device / floor flushing Rcsdpfx Abjir Apceuoh with hose and manual ball valve

Year of construction: 2012, condition: used, machine/vehicle number: AT105, Used Diversey automatic CIP systemTechnical Specifications & Performance DataThis Clean-In-Place (CIP) system is designed to deliver reliable, repeatable sanitation for beverage production and industrial packaging processes. With three dedicated tanks and fully automatic operation, it streamlines cleaning cycles across process circuits, fillers, pasteurizers, and associated pipelines. The system’s electric heating ensures precise temperature control for effective caustic and rinse phases, supporting consistent hygiene standards on second hand and used bottling line installations.System type: Clean-In-Place (CIP)Year of manufacture: 2012Automation level: Fully automaticHeating method: Electrically heatedPower rating: 15 kWElectrical requirements: 380V / 50 HzNo. of tanks: 3Tank volumes: 2 x 1.0 m³ and 1 x 0.5 m³Total tank capacity: 2.5 m³Application: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe fully automatic control architecture enables consistent, programmable cleaning sequences with minimal operator intervention. Electric heating supports stable thermal profiles during detergent and rinse steps, improving repeatability and cleaning efficiency. The system layout is compatible with standard PLC/HMI integration practices used in beverage production facilities, facilitating recipe management, cycle timing, and data logging when connected to a plant control network.Production Line Integration CapabilitiesEngineered for seamless integration, this CIP system connects to fillers, piping manifolds, heat exchangers, tanks, and ancillary process equipment. It supports inline or centralized cleaning concepts and can be deployed as a standalone sanitation module serving multiple circuits via automated valve routing. Format and product changeovers are simplified by recipe-driven cycles, making it suitable for facilities handling diverse SKUs within a used bottling line or broader packaging machinery environment.Machine Condition & Maintenance HistoryWith fully automatic operation and electric heating, this CIP system is configured for dependable day-to-day sanitation. Routine preventive maintenance focuses on pump seals, valves, gaskets, temperature probes, and conductivity/flow instrumentation typically used in CIP applications. The three-tank arrangement supports efficient scheduling of cleaning cycles and straightforward upkeep of wetted parts to maintain long-term performance and hygiene.Operational Performance & VersatilityThe multi-tank configuration supports core CIP steps such as pre-rinse, detergent wash, and final rinse, enabling effective removal of residues and biofilms commonly encountered in beverage production. Electrically heated operation enhances the dissolution and action of cleaning agents, helping achieve target sanitation outcomes across a wide range of processing equipment. The system’s automation improves consistency between cycles, reduces manual handling, and supports quality assurance requirements in second hand and used bot... Rsds Adyz Ropfx Abusch

Condition: new, Year of construction: 2025, functionality: fully functional, maximum load weight: 200 kg, warranty duration: 24 months, Available ex-stock Switzerland – immediate delivery! 24 months warranty Net capacity: Cleaning area: D=900 mm Internal height: 530 mm Loading weight: 200 kg Machine body, internal piping system, control cabinet and washing basket made of stainless steel - 2 washing pumps for efficient cleaning Rcjdpfxow Ic Hne Abush - Weekly timer for heating - Electronically controlled basket drive - Level control - Lid locking mechanism - Removable filter plate Accessories: 1x transport trolley with pull-out basket Steam extraction Automatic level top-up Oil skimmer, model WE Draining device / floor flushing with hoses and manual ball valve

Condition: used, Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the process is extremely gentle on the tooling. The pipes remain almost completely dry and free from major contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging are directly integrated). Thanks to two separate box output stations (rear-side airlocks with sliding doors), the system automatically switches to the second station when the first box is full. The removal of the finished KLT boxes takes place in parallel with the main processing time without stopping the machine. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest setup times in non-cutting separation Material-saving and free from contamination Chip-free Easy to maintain No coolant or lubricant required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimps) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feeding system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths by means of a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup operation: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panes Logistics / Output Integrated box unloading station 2 separate box output stations for rear-side removal via protected airlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of construction: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Rodpfx Aozw Ukcsbuoch Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in good optical and mechanical condition.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, total length: 6,465 mm, total width: 600 mm, total height: 285 mm, load capacity per storage section: 1,200 kg, number of shelf rows: 96, We offer this fully functional KASTO UNIPORTAL 1.2 automated long material storage system, manufactured in 2001. It is in perfect working order. The long materials are stored in up to 96 cassettes, with a payload of 1.2 tons per cassette. Usable cassette dimensions: 600 x 285 x 6465 mm. The system can be inspected on-site. Rjdpfx Asz Hm Ebobuoch If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We are offering for sale our component cleaning system from Ziegener + Frick. The system is in like-new condition. Various loading frames are included. ION Clean cleaning table. Summary with AI: The IONClean cleaning table from Ziegener + Frick is a soundproof, turnkey stand-alone system for contactless and electrostatic surface cleaning of components. You can find an example video from the manufacturer under Videos. We will gladly answer any questions you may have about the system. An inspection is possible by appointment. New price of the system: approximately €85,000. Rodpfx Asz Enr Tjbuech

Year of construction: 2025, condition: new, Parts cleaning machine, spray cleaning system, type L122 Automatically operating hot water chamber cleaning machine with basket drive via geared motor, machine housing made of stainless steel 1.4301, - 2 sets of three-sided arranged nozzle systems made of stainless steel with stainless steel flat jet nozzles, - 2 stainless steel washing pumps (manufacturer: Xylem/Lowara), - Level control as dry-run protection - 2 suction filters as pump protection - Oil skimmer for bath maintenance Rodehl Ic Repfx Abuech - Basket diameter: 1,150 mm - Usable height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2 x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (RT - 60°C) - Connection power (electrical): approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 (h) mm

Condition: used, Year of construction: 2019, operating hours: 100 h, heating capacity: 12 kW (16.32 HP), total width: 700 mm, total length: 1,300 mm, total height: 600 mm, overall weight: 500 kg, Cleaning System Manufacturer: MFP - FTW Type: Conditioning tank - Size 2 Year of manufacture: 2019 Technical data: - Heating capacity: 12 kW - Temperature range: 30 - 90 °C - Dimensions (length/width/height): 1,300 x 700 x 600 mm - Max. load weight (mesh box): 800 kg Rsdpfjzbvhfsx Abusch - Operating hours: approx. 100 h - Overall dimensions: L x W x H 1.5 x 1.5 x 1.5 m - Weight: 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Plastering machine EPA 479 with turning station, travel direction from left to right, computer and monitor renewed in 2023. Rcedpfxoz Diztj Abush

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: Fabr. / Serien Nr. Co2122, operating hours: 6,250 h, total length: 7,500 mm, total width: 2,500 mm, total height: 4,000 mm, overall weight: 6,000 kg, Equipment: cooling unit, Manufacturer: Laborex Cleaning Technology Rcsdpfjzi E S Uex Abush Mfg. / Serial No. Co2122 Cleaning system with 3 chambers, including pre-cleaning and post-cleaning. The system is completely insulated with stainless steel.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, For sale is our Fisa 3-chamber cleaning system for aluminum die-casting tools. The sale includes the associated ABUS crane, as shown in the picture. Plus, there are 2 full containers of cleaning agent. Rsdoz Rpnnopfx Abusch

Condition: used, Year of construction: 2019, Year: 2019 Condition: very good Counter: Approx. 5.4 million cycles Configuration: - DUPLO DSF-2200 – Automatic digital sheet feeder, 2 feeding stations + AIR KIT - DUPLO SCC – Trimming module - DUPLO DBM-600 – Automatic stitching and folding unit - DUPLO DBM-600T – Automatic front trimmer - 2× Hohner 43/6S – Stitching heads - Long delivery conveyor – Finished booklet delivery system Technical Specifications: DUPLO DBM-600 – Stitching and Folding Unit - Maximum speed: 5,200 booklets/hour - Maximum input sheet size: 640 × 364 mm - Minimum input sheet size: 170 × 105 mm - Maximum booklet size: 364 × 320 mm - Minimum booklet size: 105 × 75 mm - Maximum capacity: 30 sheets (80 g/m²) Rsdpfxe Afnixo Abuech - Wire stitching – saddle stitching - Saddle, side and corner stitching options - Automatic format adjustment - Touchscreen control panel DUPLO DSF-2200 – Digital Sheet Feeder - Vacuum sheet feeding system - Minimum sheet size: 105 × 200 mm - Maximum sheet size: 356 × 508 mm - Paper weight: 79–300 g/m² - Maximum speed: 200 sheets/min. (A4) - Two feeding stations DUPLO DBM-600T – Front Trimmer - Automatic trimming adjustment - Minimum trimmed size: 75 × 105 mm - Maximum trimmed size: 364 × 320 mm - Maximum speed: 5,200 booklets/hour Machine Description: Fully automatic DUPLO DBM 600 booklet making system designed for professional saddle-stitched booklet production. The system provides automatic sheet feeding, collating, wire stitching, folding and front trimming. Thanks to automatic format adjustment via the touchscreen control panel, the machine offers quick job changeovers, easy operation and high productivity. Suitable for both digital and offset printing applications.

Condition: excellent (used), Year of construction: 2022, Wobarg 1700 Automatic Stacker / Strapping Machine 2022 – Industrial Packaging & Strapping Machine Manufacturer: Wobarg Maskinkonstruktion ApS, Denmark Type: Automatic Stacker / Strapping Machine Year: 2022 Machine number: 1700 Control system: Siemens SIMATIC HMI Compressed air: 6 bar Frequency: 50 Hz The machine features an integrated conveyor system, adjustable product guides, pneumatic handling components, motor-driven mechanisms, and a Siemens SIMATIC touchscreen control panel. The system is enclosed by transparent safety guarding with access doors and emergency-stop controls. Automatic stacking and strapping configuration Siemens SIMATIC HMI operator panel Integrated motor-driven conveyor belt Adjustable product positioning and guiding Pneumatic handling system Rjdpfxe Afange Abusch Industrial electric motor and gearbox Strapping material reel holder Safety enclosure with transparent panel The machine is available for inspection. Operating condition, production capacity, and suitability for specific products should be verified before purchase. Manufacturer & Machine Identification: Wobarg, Wobarg Maskinkonstruktion, Wobarg Maskinkonstruktion ApS, Wobarg Stacker, Wobarg Strapping Machine, Wobarg Stacker Strapping Machine, Wobarg 1700, Wobarg 2022, Cyklop, Cyklop packaging, automatic stacker, automatic strapping machine, industrial stacker, automatic stacking machine, stacking and strapping machine, automated packaging equipment, Siemens SIMATIC HMI. English – Packaging & Strapping Machinery: Automatic strapping machine, industrial strapping machine, automatic strapper, automatic stacking machine, stacker strapper, stacking and strapping system, automatic bundling machine, industrial bundling machine, bundle strapping machine, product stacking machine, automatic product stacker, packaging line equipment, automated packaging line, end-of-line packaging, end-of-line automation, packaging automation, industrial packaging machinery, automatic packaging system, conveyor strapping machine, inline strapping machine, automatic banding machine, PP strapping machine, plastic strap machine, automatic product handling, industrial conveyor system, production line automation, secondary packaging equipment, bundle packaging machine, product grouping machine, packaging conveyor, stacking conveyor, industrial handling equipment. English – Food Industry & Processing: Food industry equipment, food processing equipment, food packaging machinery, industrial food packaging, food production line, food packaging automation, food handling equipment, automated food packaging line, food factory equipment, food processing plant machinery, secondary food packaging, food product stacking, food product bundling, food industry conveyor, food production automation, frozen food packaging equipment, chilled product handling, industrial food handling, food packaging line equipment, food factory automation, packaging machinery for food manufacturers. English – Dry Ice Industry: Dry ice production equipment, dry ice packaging equipment, dry ice packaging line, dry ice block handling, dry ice block stacking, dry ice block strapping, dry ice production line, dry ice processing equipment, dry ice factory machinery, CO2 dry ice production, dry ice block production, dry ice industrial equipment, dry ice handling equipment, dry ice production automation, dry ice packaging automation, dry ice block bundling.

Condition: used, Automatic PVC Corner Cleaning Machine - Urban SV 305, year 2006 The machine is designed for the automatic cleaning of welded PVC corners, including the processing of internal and external gaskets, also on acrylic-coated profiles. Tool turret for 3 cutter sets Cleaning knives Internal and external gasket processing units Units for inclined chamfers Automatic profile recognition system SPS control with user-friendly operator panel Soft-start system and electronic motor brake Technical specifications: Rcsdpfxjy Sg Ifs Abueh Operating pressure: 8 bar Power supply: 230/400 V – 50/60 Hz Installed power: 2 kW Spindle speed: 2800 rpm Machine dimensions: 2500 x 2100 x 1700 mm Weight: 550 kg Machine in working condition, ideal for PVC window and door production lines.

Year of construction: 2022, condition: like new (used), For sale is a professional Mobile CIP (Cleaning In Place) System manufactured by the renowned German brewery equipment manufacturer, Kaspar Schulz. The unit was manufactured in 2022/2023 and has never been used in regular production. It is in excellent, near-new condition. Ideal for: Craft breweries Rsdpfxszm R Ams Abuech Industrial breweries Distilleries Beverage manufacturers Dairy industry Food processing plants Main Features: 2 × 210 L stainless steel tanks Fully automated WAGO PLC control system WAGO TP600 Touch Panel HMI Siemens SITRANS MAG 5000 electromagnetic flow meter Siemens MAG 1100 F DN40 sensor ProMinent chemical dosing pumps High-quality KPA process pump Stainless steel pipework and frame Complete electrical control cabinet Technical Specifications: Manufacturer: Kaspar Schulz (Germany) Year of manufacture: 2022/2023 Tank capacity: 2 × 210 liters Power supply: 3 × 400 V / 50 Hz Current: 19 A Main fuse: 32 A Maximum operating temperature: 80°C Flowmeter: Siemens SITRANS MAG5000 + MAG1100F Control: WAGO PLC + TP600 Touch Panel Condition: The machine has never been used in continuous production. Excellent cosmetic and technical condition. Can be inspected in Wrocław, Poland. Worldwide shipping can be arranged. VAT invoice available. Additional photos, videos, and technical documentation are available upon request.

Condition: used, Year of construction: 2020, Coalza RS400-DH Automatic Vertical Dry Ice Packaging Machine, 2020 Coalza RS400-DH automatic vertical form-fill-seal packaging machine, manufactured in 2020. Serial number 11431. This machine is equipped with volumetric dosing and was configured for packing dry ice. The original Coalza installation layout for this serial number shows a 10 kg dry ice bag application and a bag ejector. The take-away conveyor is indicated as customer-supplied in the original layout and is not included unless separately agreed upon. The machine forms, fills, and seals bags from roll-fed film. The model manual specifies PE and PP film. Controls include a PLC with a touchscreen and temperature-controlled sealing. Technical specifications: Manufacturer: Coalza Model: RS400-DH Serial number: 11431 Year: 2020 Application: Dry ice bagging, original layout for 10 kg bags Dosing system: Volumetric Film: PE and PP Electrical supply: 380 V, 3-phase + neutral + earth, 50 Hz Rated current: 10 A Installed power: 3.8 kW Compressed air: 6 bar; approx. 40 l/min for the basic machine, up to 90 l/min with accessories Approximate dimensions: 1,342 × 1,993 × 3,048 mm (W × D × H); installation dimensions may vary Rcedpfx Abo Agq Sdeueh RS400 series reference: bag width up to 450 mm, recommended minimum 100 mm; film roll width up to 950 mm; bag length 50–600 mm Manufacturer’s stated RS400 mechanical maximum: up to 50 bags/min; actual output depends on the product, film, and machine configuration Coalza RS400-DH, Coalza packaging machine, dry ice packaging machine, dry ice bagging machine, carbonic ice packaging machine, ice bagging machine, automatic vertical packaging machine, vertical form-fill-seal machine, VFFS packaging machine, volumetric dosing machine, 10 kg dry ice bags, industrial packaging machinery, used packaging machine.

Condition: like new (used), Year of construction: 2016, Cleaning system type W 60 C Rcodpfx Asq Ewgkjbujh Machine body, internal pipe system, switch cabinet and washing basket in stainless steel Combination machine - turntable system with removable turning device and small parts basket - Basket diameter turntable wash basket 600 mm - Usable interior height 370 mm - Basket load rotary plate wash basket 100 kg - Usable interior height 530 mm - Dimensions of small parts basket 375 x 220 x 200 mm Mesh size 12 mm - Basket load small parts basket 20 kg Complete stainless steel design Pump(s) and external piping/fittings Version for operation with Liquids with a density of 1.3 due to reinforced pump with frequency converter Chip/particle filter with bath cover plate ECO flushing (loss of sink) for minimum water consumption Water supply from the operator's mains supply with hot water supply on the machine side Hot air drying 1 x 4 KW Oil skimmer Pumping device/floor flushing with pump and pipe system in stainless steel

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Rodpfxoz Sll Hs Abusch Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Year of construction: 2020, condition: used, The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the boxes, dispensing system, weight: 370kg, with documentation. An on-site inspection is possible. Rcedpfx Ajz S Iwdobujh