Used Bakery Technology for sale (25,319)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, conveyor belt length: 2,000 mm, conveyor belt width: 4,000 mm, Length 200 cm Width 40 cm Kjdjww Id Ejpfx Ahzswt Conveyor belt with metal detector, also for non-ferrous metals and aluminum Sensitivity adjustment of metal detection

Condition: repair required (used), Year of construction: 2010, functionality: not functional, ezjru tjrzthdghnsbdhsh fhgjfgkfgh Kwsdpfxoxy Ngdo Ahzst

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Overband Magnet Type UB 600 Operating voltage 3x400 V Frequency 50 Hz Rated operating current 5 A Operating speed 30 – 90 rpm Maximum sound pressure level 50 dB Kjdpfx Ahoxy Hl Djzowt Machine weight 750 kg Location: Austria Available immediately

Year of construction: 2024, operating hours: 35 h, condition: like new (used), functionality: fully functional, For sale a used, fully functional ACT-400 Load Bank/Loadbank from AGG Power Technology, in operation since March 2025. Technical Specifications: Voltage: 3-phase four-wire, AC400V, 50/60Hz Maximum power: 510 kW Resistive load in 11 steps, freely combinable: 1 kW, 2 kW, 2 kW, 5 kW, 10 kW, 20 kW, 20 kW, 50 kW, 100 kW, 100 kW, 200 kW Power factor: 1 Deviation from setpoint: ±5% Communication: RS232 / RS485, Modbus-compatible Kedsxvmxpepfx Ahzowt Cooling: Forced air Operating environment: -20℃ to +55℃ Duty cycle: Continuous Serial number: 2407034 CE / ISO 8528-06 / GB/T 2820.5-2009 certified Notes: Installed outdoors, total operating hours approx. 15,815 kWh Available for pickup/shipping from December 2025 Palletizing possible, buyer arranges transport Price negotiable Location: Czech Republic

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: Kwjdpfx Ahjxn Rt Uozot • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Kwjdpfewb E Sbsx Ahzet

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Kodpefwfpbsfx Ahzswt Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Year of construction: 2000, condition: refurbished (used), The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories. Ksdpfx Aefc I Haehzewt In the year 2019 the plant mechanically and electronically was completely overhauled is as new. Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH More technical details you found in the Datasheet.

Year of construction: 2020, condition: new, Fully automatic system for filling preformed packaging (unit dose) made of plastic for various liquid media. Such as CBD oil, eye solution, buffer solution etc. Models of packaging see appendix - are manufactured by us! Perfomance: 5,000 liquid packages per hour depending on container shape and the viscosity of the product. Dosing range: 1 - 10 ml (depending on packaging) The dosing range is set when the machine is at a standstill, via the dosing pump control unit. Kjdpfxsfx N Uij Ahzowt The entire system is constructed according to the requirements of hygienic design and conforms to GMP. If you have any further questions, you can reach us by email or by telephone on the number given.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes Kwjdpfx Ahsu Dg Uhezet non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 3,500 kg, pipe diameter (max.): 220 mm, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Kwedpforh Iw Tsx Ahzst Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Kjdpfx Ahewmm U Ujzowt

Condition: new, Year of construction: 2025, The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in no time at all, thanks to the optional monitoring camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications and in continuous use. Kodedgfgcspfx Ahzjwt The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-Theta lenses dependent / 3D option) Laser source: IPG (Pulsed Fiber Laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New, optional: software-controlled, variably adjustable working width (X, axis max. 450mm depending on the structure) included in the scope of delivery!

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, working length: 1,250 mm, working width: 1,250 mm, Equipment: CE marking, cooling unit, documentation/manual, P class = processing area X 1250 mm x Y 1250 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Simple and highly precise laser processing - laser cutting at high speed and quality Kwsdek Ran Eopfx Ahzet

Condition: new, Year of construction: 2025, machine/vehicle number: AB2024, (Laser marking / Laser engravings) and metal and organic materials suitable for special laser applications. The use of a variety of fonts, barcode application, serial numbers, logos and images is effortless. Thanks to the excellent resolution almost all requirements can be met at marking tasks. The software is extremely user-friendly. Even very complex and complicated marking tasks can be easily supplied to the industrial PC to easily create. The exact positioning is done in no time, thanks to the integrated positioning laser. Since the system has little wear and thanks to the fiber laser technology company (IPG Photonics / IPG Laser GmbH) is virtually maintenance-free, it can be used particularly in industrial applications and in continuous use. - Bearbeitungsflaeche: 110x110 or other zBsp. 175x175 mm (F-Theta lenses dependent) Optional - Laser source: IPG Laser alternatively other depending on the application - Laser Power: 20W / 30W Optional / 50W - Software-controlled precision axes worktable (X, Y, Z axis) - Traversing in Z max. 200mm - Marking speed: up to 8000 mm / s Kodpfj Sd Trox Ahzewt - Redundant safety system - Conditioning Laser Class: 1 - Scanlab SCANcube for perfect results - PFEIFER technology Industrial PC incl preinstalled control software. - Positioning laser: integrated diode laser for optimal positioning - Optional: camera positioning, 3D processing, database connectivity - Virtually maintenance-free

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. Ksdpof U Spxjfx Ahzowt The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Air cooling because of low energy consumption! Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: including process air control New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Condition: new, Year of construction: 2025, travel distance X-axis: 390 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 300 mm, spindle speed (min.): 2,000 rpm, spindle speed (max.): 24,000 rpm, overall weight: 450 kg, tool diameter: 14 mm, warranty duration: 24 months, power: 2 kW (2.72 HP), If you are looking for a real machine and not a toy, then you have come to the right place: immediately ready for use, engraving, milling, drilling, for effective plastic and light metal processing. CNC DIN ISO G code milling machine including handy CNC control Working area: with T-slot table X=390mm Y=230mm Z=300mm Basic frame of the milling machine made of cast elements approx. 280kg with base cabinet for necessary machine assemblies such as cooling and power supplies / inverter and control approx. 170kg All axes with ball screws and 25 mm linear guides including dust protection and manual central lubrication for all axes including encoder-monitored axis drive! High-frequency spindle up to 24,000 rpm 2kW water-cooled Collet ER20 up to max. 14 mm milling tools - optional G code controlled minimum quantity lubrication - optional G code controlled suction - optional G code controlled vacuum table solution (* Prices depending on equipment, control and spindle, this is a brand new milling machine from our production) The milling machines are 100% manufactured according to customer requirements in our factory in Plauen! Illustrations show different equipment variants; You will receive a brand new milling machine from our production) Technical characteristics: Kjdpfsi Hb I Tsx Ahzowt · Drive system: high-precision ball screw · Working speed: max. 6000 mm/min x-y-z working area / travel range: 390 mm x 230 mm x 300 mm · Passage height: 300 mm x-y-z increment: 0.01mm/increment x-y-z repeatability: 0.02 mm · File formats: G-code, ISO data · HF milling spindle: 2.2 kW water-cooled, others optional · Spindle speed: 6,000 - 24,000 rpm Tool chuck ER20: Power connection: AC 240V, 50Hz · Power consumption: max. 2,600 W · Dimensions (WxDxH): 1300 x 850 x 1800 mm · Weight approx. 475 kg with base cabinet

Condition: new, Year of construction: 2025, skylaser Mark - 2D 3D optional fiber laser engraving / marking laser is the complete solution for your complex laser engraving - Applications The skylaser laser marking / engraving laser at a Glance: Processing Area : from 110 x 110 or 120x120 or 300x300 mm (depending F- Theta lenses / 3D option) Laser: IPG ( pulsed fiber laser , YTTERBIUM PULSED FIBER LASER ) SCANLAB galvanometer Nominal laser power : 20W / 30W / 50W New: Software controlled variably adjustable working width ( X axis max 200mm depending on the design . ) Included! New: Software controlled variably adjustable working height ( Z axis max 400mm depending on the design . ) Included! Optionally, other work areas - Automatic Materialzufuehrung etc. Air cooling as low power consumption Labeling speed: up to 5000 mm / s ( SCANLAB dyn AXIS ® galvanometer to reach 10 SCAN ® cube marking speeds of up to 640 characters per second. ) Redundant safety system Laser Class 1 according to the configuration or Laser class: 2 ( optional pilot through laser ) piper -technology HQ mirrors and optics for perfect results , powered by Scanlab (R ) Kwsdebv Dayjpfx Ahzet piper -technology industrial PC with the software pre-installed control New: including Laser Focus Finder New: including process air control Optional : laser positioning : an integrated diode laser for optimal positioning Including new F -theta lens 110 x 110 mm working area with protective glass! ( To extend the working range of optional (120, 180 , 350 mm) virtually maintenance-free Key Features Let yourself be inspired and please request our product video on your sample production ! Model Mark IPG laser engraving laser skylaser Work size 100 x 100 or 120 x 120 mm (F -theta 160mm ) other optional Laser power 20 / Option: 30/50 W ( air cooled) laser method YTTERBIUM PULSED FIBER LASER Engraving

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, table length: 3,050 mm, table width: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: cooling unit, safety light barrier, skyCUBE XL class – Large Format – Shuttle Table Laser Cutting Kwjdpfx Ast A N A Rehzjt The multifunctional flatbed laser center skyCUBE XL class, manufactured by PFEIFER technology in Saxony, Germany, has been designed for your professional cutting applications. It combines a new level of productivity with cost-effectiveness and precision. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, offering you the highest level of safety. The ergonomic design with a pull-out worktable makes machine loading easier. Drawers in the lower section of the machine collect cutting waste. Optimize quality and cutting speed even with thick materials thanks to 6kW laser power—even when cutting with compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Naturally, you’re always on the safe side when operating the skyCUBE laser! The skyTUBE Pro is a Class 1 laser system. There is no risk of exposure to laser beam emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass and a perfectly shielded cutting area reliably protect you from the hazards of laser radiation, while an independent safety system allows loading without interrupting production. Select the laser power best suited to your needs; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Maximum dimensions (L×W×H): 2310×8505×2505 mm / Laser machine 4.0 T Power supply depending on laser source (6kW) 400V/50Hz 3 phase / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on material and process Laser processing made easy and highly precise – high-speed, high-quality laser cutting

Year of construction: 2025, condition: new, machine/vehicle number: AB2024, Pclass = working area X 1250mm x Y 1250mm x Z 25mm Kodpfx Ahsdvik Nozswt skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals Laser processing simple and high-precision - laser engraving, cutting at high speed and quality

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series machine - 1250 mm x 1250 mm x 220 mm High precision - milling and drilling with extremely high speed and quality. As CNC Milling machines manufacturer whistler-technology with SkyCNC CNC milling and engraving your partner. Our PFEIFER technology SkyCNC WK series milling machines with high-precision ball screw drive on all axes provide highest precision, accuracy and speed - with a pleasant value for money.   By building a high solid steel base frame ca. 2,2 t high static rigidity of the machine is achieved, so that the processing of solid woods and various metals will be trouble. The sophisticated location and distribution of 35mm linear rails and guides and the associated massive portal with its vibration damping characteristics distinguish our CNC milling machines made especially. The superior programmable CNC control allows flexible intervention via touchscreen in all production conditions and is standard in our PFEIFER technology SkyCNC WK series milling machines. This CNC control, you can create your milling data or CAD / CAM import data and then can be processed independently of a computer.   The tool changer (up to 16 tools), the vacuum table made of solid aluminum, various tool / workpiece cooling solutions, the automatic lubricating device for all axes and other refined details, complete this milling system.   With the PFEIFER technology SkyCNC WK series you get a reliable and efficient bulk - Portal - milling system for your applications.   - Drive system: high-precision ballscrew on X and Y axis and Z axis of high-precision manufacturing - Operating speed: 15 m / min - Xyz Workspace / traverse: 1250 x 1250 x 220 mm - Table size (vacuum table with milled vacuum tracks): 1220 x 1220 x 30 mm - Xyz Repeatability: 0.03mm - Xyz accuracy: 0.01 mm - Compatible with DIN ISO CAM etc. - Format: ISO standard G-code, FANUC compatible - Additional: Spindle motor / tool changer / Vacuum table according to customer requirements - Warranty: 2 years Kodpfx Ahe Sd U Dozjwt - Spindle Power: from 5.5kW (other spindle power optional) - Spindle speed: 6000-24000 U / min (depending on requirements) - Spindle taper: BT 30 4ea ER20 (other recordings optional) - Drive: AC SERVO motors on all axes - Tool changer: 6 magazine slots - Power supply: AC400 V ± 10% 50Hz - Power 10-15 kW (depending on equipment) - Dimensions: 2670 (L) X 1735 (W) x 1790 (H) mm - Weight: 2700 kg

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,064 nm, table length: 1,500 mm, table width: 3,000 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 8,500 kg, warranty duration: 24 months, space requirement height: 2,400 mm, space requirement length: 8,550 mm, working range: 1,500 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1550 mm x Y 3050 mm x Z 150 mm High-precision linear axis system with 6 - 12 KW laser power Kjdpfxer D Nfks Ahzswt Double change table system, laser processing at one working height! (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / laser machine 6.5 T + external loading table 2T = 8.5 tons Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on the material and process Simple and highly precise laser processing - laser cutting at high speed and quality

Condition: new, Year of construction: 2025, SL class = machining area X 1250 mm x Y 2500 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power Ksdpok Ranzjfx Ahzswt (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Laser processing easy and high-precision - Laser cutting with high speed and quality

Condition: new, Year of construction: 2025, If you are looking for the right machine and not a toy, then you have come to the right place: Foil label - label printer - name plate machine Laser markers skyLASER Mark 500 - 2D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where the conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most filigree structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, without force and without tool wear. The advantages in your application are the geometric flexibility and high machining accuracy. This type of machining can be used regardless of the hardness of the workpiece to be machined. The flexibility of the system increases with the mobile work table, which can be adapted to your needs. You can easily integrate the system into your production line, or operate it as a stand-alone solution. Our skyLaser Marks deliver very precise and permanent markings (laser engravings) and are suitable for the special area of ​​laser metal and certain organic substances. The use of a variety of fonts, the application of barcodes, serial numbers, logos and pictures is easily possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of embossing stamps, engravings, inscriptions and complex, fine structures, the software is extremely user-friendly. Even very complex and complex marking tasks can be easily created on the supplied industrial PC. Precise positioning is done in no time at all, thanks to the optional observation camera for process tracking and software-based workpiece alignment. Since the system has hardly any wearing parts and is almost maintenance-free thanks to the IPG laser technology, it can be used especially for industrial applications as well as in continuous use. Kedpjcuiz Sjfx Ahzewt The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or 300x300 mm (F-theta lenses dependent / 3D option) Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working width (X, axis max. 450mm depending on structure) New: software-controlled, variably adjustable working height (Z, axis max. 200/450 mm depending on the body) Optional other work areas - automatic material feed, etc. Air cooling due to low energy consumption Labeling speed: up to 8000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCAN cube ® 10 achieve labeling speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (through optional pilot laser) pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: incl. Process air control New: including suction control

Condition: new, Year of construction: 2025, Pclass = working area X 1250mm x Y 1250mm x Z 25mm skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals Laser processing simple and high-precision - laser engraving, cutting at high speed and quality Kjdpscwph Tjfx Ahzswt