Used Balancer for sale (832)

Condition: new, SPRING BALANCE with safety equipment in accordance with DIN 15112 Brand DALEX Type D 6/130 Tar load 115-130 kg Kwodpfx Ahsvr Elqszot Cable extension 3 m Suspension safety hook, rotatable and pivotable Load capacity continuously adjustable via adjustment screw Spring break protection Weight: 44 kg unused / as good as new / minor signs of storage

Condition: good (used), Year of construction: 1996, Test specimen diameter: 320 mm Kedsv E D Nuopfx Ahzjwt Test specimen width: 140 mm Test specimen weight: 20 kg Test mandrel length: 178 mm Test mandrel pin diameter: 15 mm Weight: 4.7 kg Space required: 420 x 280 x 350 mm

Condition: excellent (used), The Schenck TB Comfort is a horizontal hard-bearing balancing machine, designed for high-precision balancing of turbocharger rotors, in particular turbine wheels with shaft as well as compressor wheels. It covers a wide range of speeds and rotor sizes, with a maximum rotor power of 200 W and a maximum rotor diameter up to 350 mm. Kwedpfjw N Rg Eox Ahzet

Condition: new, Year of construction: 2025, or Weight ----- 1000 kg or Weight ----- 10 kg or Diameter ----- 1400 mm ft Diameter ----- 10 mm ft Diameter ----- 240 mm Kwodpfsq T Iklsx Ahzet Bed Length ----- 3000 mm Motor power ----- 11 kW Drive Unit ----- Belt

Condition: new, Year of construction: 2025, Technical Specifications Max Weight 3000 kg Kwedpfxsr Dd Ave Ahzst

Condition: new, Year of construction: 2025, FEATURES BENEFITS Compact design Integrated air supply Kjdpfxoq Trzfe Ahzjwt Utilises your existing workshop air supply, 7 bar, clean dry air requirement It has the ability to measure digital and analogue wastegates on all vehicle models. With its 23.5-inch full touch screen and simple interface, it is very easy to use. Can be used without an internet connection Built-in database of more than 1900 references Flow adjustment possible for all types of turbochargers up to 200 kg/h Calibration test plates provided to easily verify machine accuracy All types of turbochargers can be easily connected with 6 adapters included as standard. G3 REA-Master (USB) Controller Built-in complete with 14 cables 12 volt and 4 cables for 24 volt It displays and adjusts the current, voltage and position values of the Turbo VGT turbochargers. It can test all types of turbos with electronic, vacuum and vacuum sensor. Operates on 200 volts of electricity Calibration test plates supplied for easy verification of machine accuracy Supports PWM, FDCan, Can 2.0, Linbust, j1939 automatic communication protocols You can assign programmes to activators Quick-release mounting flange with adapters Machine weight 150kg Full CE Accreditation INCLUDING 1 x FX1 Flowbench Machine 1 x Touch Screen Monitor 14 x R.E.A. Cables 4 x 24 v Cables (OPTIONAL) 3 x C-Clamps 1 x Magnetic Stand

Condition: new, Year of construction: 2025, Our most advanced software delivers incredibly sensitive measurements. Only 1.5 seconds to measure. Validation world-wide. Balancing speed - up to 300,000 revolutions per minute. Long lasting mechanical quality. 7/24 online support. Kwedsq Tr R Sepfx Ahzet 10 pieces of nozzles (28 - 65mm). 25 pieces of flanges. Five-stage oil filtration system. A core oil leak test. Automatic air flow control valve. Prevent turbo from running dry by controlling oil pressure and temperature. Energy-saving and cost-saving adapter system. Adapter changeover time is less than 15 seconds. Free online technical support during the warranty period and after the warranty period. Support for spare parts. Required capacity of the air tank 1/2 m³. Colour printer. (Ops) Dremel for grinding. (Ops)

Condition: new, Year of construction: 2025, or Weight ----- 20 kg or Weight ----- 500 g or Diameter ----- 450 mm ft Diameter ----- 5 mm ft Diameter ----- 50 mm Ksdpfjq T Riwox Ahzswt Motor power ----- 750 W Bed Length ----- 600 mm Drive Unit ----- Belt

Year of construction: 2023, condition: as good as new (ex-display), The mobile field balancing machine from the experts The statistics are indisputable: Over half of all faults and failures of machines and systems can be attributed directly or indirectly to unbalances in rotors. The SmaRT helps you to identify an unbalance simply and accurately, and to correct it with the minimum effort. With the SmaRT, rotors of almost any size and weight can be balanced quickly, costeffectively and accurately in the installed condition, and therefore without having to dismantle the machine. The SmaRT advantages: • Easy operation with the aid of navigation and function buttons, Kedpemt Atdsfx Ahzewt • Large illuminated colour display, • Standardised vibration measurement, • Assessment setup to DIN ISO 10816-3, • Simple transfer and documentation of measurement results.

Condition: used, workpiece weight 100 kg workpiece length 1000 mm diameter 500 mm centre height 280 mm total power requirement 2,5 kW weight of the machine ca. 1 t Kjdpfov Nq Swox Ahzswt dimensions of the machine ca. 1,6x 1x1,6 m

Condition: new, workpiece weight (max.): 10 kg, rotor diameter: 250 mm, High-Precision Vertical Balancing Machine for Disk-Type Rotors up to 10kg The 97V10 is a versatile vertical balancing machine designed to efficiently balance disk-type rotors without their own bearing surfaces. Ideal for serial, small-scale, and single-piece production, it ensures optimal performance and reliability of your products. HIGHLIGHTS • High Accuracy: Delivers precise unbalance measurement with an accuracy of at least 4 g∙mm/kg. • Versatile Design: Accommodates a wide range of disk-type rotors, including: - Discs of various designs - Pulleys and flywheels - Fan impellers - Brake discs and drums - Couplings - Pump impellers - Cutting tools • Efficient Operation: Kedpfxeu U Nqde Ahzowt - Vertical axis of rotation for quick part replacement and easy access. - Semi-automatic mode for streamlined operation. - Protective covers and compliance with CE and ISO safety standards. • Flexible Configuration: - Customizable with drilling or milling modules for in-situ unbalance correction. - Available with various spindle fits (cylindrical or tapered) and mandrels. - Options for pneumatic or manual collet chucks and hydraulic jacks for heavy workpieces. SPECIFICATIONS Weight range of balanced rotors 0.1 - 10 kg Maximum rotor diameter 250 mm Maximum rotor height 150 mm Minimum achievable residual specific unbalance 4 g*mm/kg Number of measurable rotor correction planes 1 & 2 Rotor speed range 300 – 1500 rpm Electric motor power 1.0 kW Parameters of the supply network 380V, 3 Ph, 50Hz For more information and to discuss your specific balancing needs, please contact our sales team. We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Kwedpfswgnu Njx Ahzot Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Year of construction: 1970, condition: not inspected (used), Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Technical data: Manufacturer: Trebel Type: FC4c-xn Kwjdpfshikdwjx Ahzet Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm Kwsdpfex Ein Ssx Ahzst - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm Kwedpswcg Elefx Ahzjt diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DETAILS Maximum balancing weight: 2,000 kg Balancing body diameter without machining unit: 10 mm Bed length: 3,000 mm Swing diameter over machine bed: 2 mm Rotor shaft via belt drive: 10 mm Drive unit balancing speed (5 gears): Max. 80 / 160 / 290 / 470 / 630 rpm Measurement method: force measuring Electronics speed measurement range: 60 to 30,000 rpm Center height measured in bed: 1,200 mm Rollers: 2x 195 x 56 mm Axle spacing: 205 mm Kwsdpfjw T Sqmsx Ahzot Adjustment travel: 3 mm vertical MACHINE DETAILS Drive power: 22 kW Compressed air: 6 bar Connected load: 25 kVA / 20 kW Machine weight: approx. 5,500 kg Machine dimensions approx. (L x W x H): 3.3 x 1.5 x 2.0 m Control cabinet dimensions: 6 x 610 x 21 mm EQUIPMENT - Measuring electronics PCX - Base frame (cast steel body) - Mounting length between bearing supports up to approx. 3,000 mm - Adjustment with hand ratchet via rack - Bearing supports/swing bearing blocks: 2 pieces

Condition: used, Year of construction: 1982, workpiece weight 60 kg Kwedpjt Hxbqofx Ahzjt workpiece length 700 mm diameter 500 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 1999, Balancing machine for balancing crankshafts Kwjdpfxov I Airo Ahzet Automatic feeding belt with internal loader Separate measuring and drilling stations Balancing machine for crankshafts Automatic feeding belt for internal loader Separate gauging and drilling stations

Condition: as good as new (ex-display), Compact balancer with vertical spinning axis and load capacity up to 50 kg. Thanks to its compact design, the machine takes up relatively little space and does not require foundations, so it can be easily relocated to the desired location. The balancing process is controlled by the latest measuring system "ROTORTEST 9.5" with dedicated software equipped with workshop programs, which convert the unbalance into a convenient correction method, e.g. into drilling or milling parameters. Kwjdpfx Aof Nvwpohzot Vertical axis balancing machine is recommended for balancing rotors mounted on a bore, e.g. fan rotors, pulleys, flywheels, tools, pumps and many others. The biggest advantages of this type of balancing machine are its universal application, the possibility of using dedicated self-centring chucks giving high measuring accuracy, simple and quick calibration method, so called "manufacturer's calibration", which does not require calibration runs to be carried out before starting the measurements. The whole procedure consists only in entering basic rotor parameters into the software. This machine is an excellent choice for balancing single pieces of various rotor models, and in particular for balancing large series of the same rotor model. Parameters Maximum rotor weight - 50 kg Maximum rotor diameter - 650/850 mm Maximum rotor height - 500 mm

Year of construction: 1990, condition: excellent (used), 1 piece mass balancer for creel. Kedpfxefm Ev Rs Ahzewt With complete accessories and attachments. Little been in use.

Condition: good (used), Balancing Scale Support surface: 420 x 280 mm Height: 330 mm Disc size up to: 500 mm Distance between roller supports: 135 mm Accessories: 2 mounting arbors, 56 and 68 mm diameter, length 280 mm Condition: good Total weight: 45 kg Scale weight: 37 kg Kodeub Tnaspfx Ahzswt

Condition: used, Year of construction: 2010, functionality: fully functional, For sale: used balancing machine. Year of manufacture: 2010. Dimensions (W/D/H) approx.: 1,200 x 1,200 x 1,700 mm. Weight: approx. 400 kg. The machine can be inspected by appointment. Kjdjw Dpw Hspfx Ahzewt

Year of construction: 2024, condition: as good as new (ex-display), Rim Balancing Machine: - Automatic clamping of a wheel hub with a heavy duty pneumatic clamping chuck - Automatic brake and wheel positioning - Fast balancing cycle time - Made of well-known brands heavy duty components Kwodpfxet Tuqbe Ahzot - Fast tool changeover time - Servomotor as a spindle drive motor

Condition: as good as new (ex-display), Universal balancing machine on a horizontal rotating axis bed with belt drive, bearing capacity up to 700 kg, which can be additionally equipped with rotor drive from a headstock by means of cardan shaft. The machine makes it possible to balance many types of rotors such as engines, paper machine shafts, fans, pumps, spindles and many other machine subassemblies. The balancing process is controlled by the latest measuring system "ROTORTEST 9.5" with dedicated software equipped with workshop programs converting unbalance into convenient correction method, e.g. into drilling or milling parameters. The greatest advantages of this type of balancing machine are its universal application, high measurement accuracy, simple and quick calibration method, so called "manufacturer's calibration", which does not require calibration runs before starting the measurements. The whole procedure consists only in entering the basic parameters of the rotor into the program. The machine is an excellent choice for balancing single units of various rotor models as well as large series of the same rotor model. The machine ensures high balancing accuracy and short cycle times. Highest quality components of worldwide recognised brands are used in the production of the balancing machine. The proposed machine is a demonstration machine, however its operation and appearance is in perfect condition Parameters: Maximum rotor weight - 700 kg, Maximum diameter over the bed - 1700 mm. Ksdpfxef Nvwho Ahzewt The maximum length of the rotor - 2500 mm [...]

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Kodeq Nin Uepfx Ahzjwt