Used Band Dryer for sale (5,717)

Condition: used, functionality: fully functional, machine/vehicle number: U00188, Year of construction: 2015, operating hours: 1,334 h, construction height: 2,170 mm, empty load weight: 2,750 kg, total length: 2,370 mm, construction width: 1,450 mm, sweeping width: 1,450 mm, Wet scrubber machines Chassis number: U00188 Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Solid rubber Rear tire type: Solid rubber Chsdpfszqhh Ijx Aknsa Battery voltage: 36V Battery Ah: 930Ah Battery type: PzS Battery year of manufacture: 2015 Battery condition: 60 - 80% Description: German Tennant T17 No.: R0800 Year of manufacture: 2015 Operating hours: 1,334 Chassis number: U00188 Working width: 1,450 mm Overall height: 2,170 mm Length: 2,370 mm Overall width: 1,450 mm Weight: 2,750 kg Battery: 36 V / 930 Ah, PzS, year 2015 Battery condition: 60–80 % Tires: Solid rubber, single tires front and rear Condition: Ready for use and fully functional Visual condition: Very good Technical condition: Very good Location: Düsseldorf Availability: Immediate Charger: Not included Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. If you have not found the right machine, please contact us. We have a large selection of additional equipment available on site. English Tennant T17 No.: R0800 Year of manufacture: 2015 Operating hours: 1,334 Serial number: U00188 Working width: 1,450 mm Overall height: 2,170 mm Length: 2,370 mm Overall width: 1,450 mm Weight: 2,750 kg Battery: 36 V / 930 Ah, PzS, year 2015 Battery condition: 60–80% Tires: Solid rubber, single tires at the front and rear Condition: Ready for use and fully functional Visual condition: Very good Technical condition: Very good Location: Düsseldorf Availability: Immediately Charger: Not included Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site.

Condition: new, Electrical voltage: 400 / 440 V Chsdpfxed R Uzze Aknsa Frequency: 50 / 60 Hz Number of phases: 3 / 3 phases

Condition: like new (used), Year of construction: 1999, machine/vehicle number: B4361, AGAZZANI band saw, model 700 Wheel diameter: 700 mm Cutting height: 405 mm Cutting width: 680 mm Blade speed: 1570 RPM Rotation speed: 715 RPM Dimensions: 1290 x 730 x 2270 mm Weight: 400 kg Supply voltage: 400 V Power: 3 kW Available for viewing in the ARDENNES region. Codpfjzq Akkex Aknoha

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Chedpfx Akexztfaensa Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Csdsw Tfw Hopfx Aknsha Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Chodpexy Tm Iefx Aknsa

Condition: used, Year of construction: 1986, Roll diameter: 600 mm Cutting height: 385 mm Motor power: 2.2 kW Table tiltable Table size: 540 x 600 mm Total height: 2100 mm Weight: approx. 260 kg Storage location: Nattheim Csdpfx Akew D Aybenjha

Condition: used, Year of construction: 1992, Wheel diameter: 500 mm Band guidance above and below Tilting table Codjw D Aw Hspfx Akneha Location: Nattheim

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 503382, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, total length: 1,300 mm, total width: 650 mm, total height: 1,750 mm, overall weight: 150 kg, number of chambers: 2, year of last overhaul: 2023, We are offering this ready-to-use Amboss Langbein D2x8 dry air dryer with cooler, manufactured in 2006. Manufacturer: Amboss Langbein Model: D2x8 Year of manufacture: 2006 Condition: ready for use Type: Dry air dryer with industrial cooler Chsdszarqmepfx Aknea Hopper volume: 2 x 50 liters Flow rate: 2 x 15 kg/h Drying temperature: 30-160 degrees Celsius Dry air volume: 80 m3/h - 180 m3/h If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Chodpeznh Nmofx Aknoa Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° table surface area 600 x 600 mm table - tiltable +/- 45 ° Cedjxcp Sfepfx Aknjha total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm Chsdpfoylp A Dox Aknja total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Used Atlas Copco FX6 refrigerant dryer Codpfxozrtbio Aknoha 2.34 m3/min 14 bar Year of manufacture: 2019

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Cjdpfxezpb Eqe Aknsha

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NL3202626756, sweeping width: 530 mm, empty load weight: 150 kg, fuel type: electric, construction height: 1,050 mm, drive type: Elektro, construction width: 900 mm, Sweeping and suction machine Chassis number: NL3202626756 Condition: New unit Technical condition: New Codpfx Akevzzcqeneha Description: Sweeping width 530 mm, suction width 760 mm, brush pressure 27 kg, working width 530 mm, area performance 1,800 m²/h, fresh water tank 50 l, dirty water tank 50 l, length 1,300 mm, width 900 mm, height 1,050 mm, weight 150 kg.

Condition: ready for operation (used), A Tmj mitre-cutting band saw is offered. Cutting capacity at 90° round: 500mm, cutting capacity at 90° square X/Y: 500mm/500mm, cutting capacity at 45° round: 370mm, cutting capacity at 45° rectangular X/Y: 500mm/370mm, cutting capacity at 60° round: 250mm, cutting capacity at 60° rectangular X/Y: 500mm/250mm, mitre range: 90°-60°, saw blade dimensions X/Y/Z: 5620mm/41mm/1.3mm, max. cutting speed: approx. 100m/min, max. length stop: 1000mm. Dimensions X/Y/Z: approx. 2800mm/1260mm/2300mm, weight: approx. 1550kg. Inspection possible by prior arrangement. Chsdezrzpbjpfx Aknoa

Condition: ready for operation (used), Offered for sale is a fully automatic KASTO vertical bandsaw. Round cutting capacity: 10mm-260mm, max. square cutting capacity X/Y: 260mm/260mm, min./max. cut-off length: 5mm/600mm, feed length: 600mm, min. remnant length: 10mm, max. cutting speed: 125m/min, saw blade dimensions X/Y/Z: 4115mm/41mm/1.3mm, control: KASTO minipos 807, weight: approx. 2200kg. Inspection by appointment is possible. Chodpozrzn Rofx Aknja

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer this excellent HEBROCK AKV 3005 DK-F Airtronic edge banding machine with solid edge band magazine, manufactured in 2014. Manufacturer: HEBROCK Model: AKV 3005 DK-F Year of Manufacture: 2014 Condition: very good Category ID: 877 Type: Airtronic edge banding machine with solid edge band magazine Hebrock AKV 3005 DK-F edge banding machine (2014) – Fully equipped with Airtronic & Solid Edge Band Feeder An extremely well-equipped and production-ready edge banding machine. The machine is in very good condition; this specific machine is equipped with Hebrock’s Airtronic unit for zero-joint/laser-joint (hot-air system) and a solid edge band magazine for thick wood edges. The machine has a complete processing line, which means a finished result directly from the machine without the need for post-processing. Pre-milling: Double pre-milling cutter (joint milling) with diamond tools for a perfect cutting surface. Gluing system: Traditional glue application (hot melt) + Airtronic unit for seamless zero-joint. Magazine: Automatic edge band magazine, also optimized for solid edge bands. Cutting: 1 high-precision cutting blade. Milling: Upper and lower milling unit for radius and bevel milling. Corner rounding: Integrated corner copying/corner rounding for finished corners. Chodpfxjzrm Dqe Aknea Finishing/Post-processing: Profile scraping (radius scraper), flat scraping (surface scraper), and polishing unit. The machine handles everything from thin rolls (ABS/PVC) to thick solid wood edges. Thanks to the Airtronic system, you can achieve the sought-after "invisible joint" required in modern furniture manufacturing. The machine can be demonstrated in operation by appointment. The buyer is responsible for removal and transport. VAT will be added to the price. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 27 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. Cjdezp Iu Sspfx Aknoha The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: used, Year of construction: 1998, 1 unit multi-chamber desiccant air dryer, GERCO TTM4/50 Color: as shown in the images, corresponding to the images and inspection Codszqci Tepfx Aknjha Year of manufacture: 1998 Condition: used

Condition: used, Storage location: Sonnefeld Chedpfjway Dcsx Aknja

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Cedpfovvkd Tex Akneha Storage location: Nattheim

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Codpfx Akjvvkfdjnsha

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Chedpfx Ajvvkfqsknoa Storage location: Nattheim

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Chodpfx Akevvkfwjnja