Used Infrared Dryer for sale (1,963)

Condition: used, Year of construction: 2010, functionality: fully functional, Used Mark compressor with dryer. Used, in good working condition. Ready for pickup. Csdpfswprviox Abuspu

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Complete with three filter set Cpodpfxexaxr Nj Abuou

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Cjdpforp D Uxox Abuspu Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: like new (used), Chanber size: Codpfxed Sm Dij Abuepu 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C °

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: DR047-13 / 10015861, Complete resin dryer system for injection moulding production. The system has been used sparingly and is in good condition. The system consists of multiple components that can also be sold separately, as follows: 1 resin dryer Moretto VTH 31 V, SN 1906041 / 2019 2 resin dryers Plastic Systems, SN DR047-13 / 10015861 / 2013, capacity 370 kg each Dwjbk Rkjwx E Nbjm Eceb Cpsdpfx Abjwx E Nbeusu 23 resin silos with the following capacities: - 54 kg * 4 pcs - 105 kg * 6 pcs - 113 kg * 2 pcs - 75 kg * 2 pcs - 56 kg * 4 pcs - 22 kg * 2 pcs - 140 kg * 1 pc - 210 kg * 1 pc - 420 kg * 1 pc Distribution pipelines. Stainless steel pipes and fittings available. Do not hesitate to contact us for a personalised price quote.

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Cjdpfxoq Igyvo Abuopu Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: Cedoq Nfuzepfx Abuopu - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11165/1, working width: 1,300 mm, workpiece height (max.): 40 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Cpsdpsydn S Iofx Abuou Max. processable thickness: 40 mm EQUIPMENT Drying system with 3 UV lamps Transport system with motorized rods Separate control cabinet

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, The auction consists of: CEFLA FEV E Dryer: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW CEFLA Cooling Zone: AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU CEFLA TR 3000 Roller Conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW Note: The paint booth visible in the video is not included in the scope of delivery or sale. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Codpsyg Eynofx Abuopu Maximum drying height: 1780 mm (excluding conveyor) Pass-through working height: 80 mm Fan throughput: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch panel Dimensions (L x W): 7,500 x 1,783 mm Emitted solvent-containing air: 0-4,000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan Cooling Zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Pass-through working height: 80 mm Maximum tunnel height: 1,780 mm (excluding conveyor) Maximum air knife outlet speed: 32.5 m/s Fan power (supply/recirculation): 3 kW Fan power (exhaust): 1.5 kW Air throughput (supply/recirculation fan): 6,000 m³/h Air throughput (exhaust fan): 6,000 m³/h MACHINE DETAILS Control: LCD 5.7" touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 bar conveyor with double chain, steel guides, and chrome-plated bars CEFLA TR 3000 Roller Conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Condition: used, Used Calmic Eurovent 316 stainless steel vacuum shelf dryer. Calmic Eurovent is a leading manufacturer of drying equipment. This unit has an approximately 0.75sqmt drying area. Has (3) 500mm wide x 500mm deep x 160mm high individual drying compartments. Unit includes hot oil recirculation system and (1) Leybold vacuum pump. Unit includes electrical cabinet and separate control cabinet. Main unit is mounted on a mild steel frame. Cpodpfeygvniox Abueu

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Cpsdpfx Aoygvmrebuou Click on the link below to see a video of the machine running.

Condition: used, Little used Niro model MP3/2/3 10 bar stainless steel multi processor fluid bed dryer / granulator / coater. Rated 10 bar over pressure. Unit includes various bowl inserts, spray arms, and air handling system. Cpedpfx Abjygvmlousu

Condition: used, Used Aeromatic model MP1 stainless steel fluid bed dryer. Stainless steel filter chamber approximately 16 litre capacity with a maximum product volume of 13.5 litre which is hinge mounted and removeable. Operating pressure is 6 bar. Driven by a 3.3kw 3/50 supply. Reportedly minimum batch weight 400g and maximum batch weight 6 kg. Cjdpfx Abjygvmfouepu

Condition: used, Reportedly very little used and only ran for validation, Niro model MP1 stainless steel multi processor fluid bed dryer/granulator/coater. Can be used for drying, top spray fluid bed granulation and bottom spray powder, pellet & tablet coating. Filter chamber includes 12 litre product bowl which is hinge mounted and removable. Also includes cylindrical expansion chamber and hinge. Has flange, Sightglass and lamp. Inlet air handling includes inlet air preparation unit with G4 inlet filter, steam air heating coil, face/bypass damper with actuator and F8 fine filter. Also has Ventex ESI-R (10 bar) inlet explosion protection valves including controls. Process air bypass system includes additional regulating valves to allow air to bypass the processing chamber. Fan is 10 bar pressure shock resistance with negative static pressure head to 14,000 pa driven by EEXD motor. Control system is Siemens S7/300 and 11a=MP-11A370 for location in zone 2 area. Includes product temperature sensor and indication. In addition to standard unit it includes additional 16 litre stainless steel product container and sample socket with perspex flask. Includes top spray lance assembly with nozzle set and through the wall peristaltic pump. Has Precision coater insert for 12 & 16 litre containers with pellet retaining element and additional nozzle inserts. Has secondary dust filter for use with the Precision coating process (10 bar PSR). Also has PRE heater and humidification coil. Includes dehumidification unit and H13 Hepa inlet filter. Also includes exhaust police filter with EPV and batch data recording system, data recording and trending package. Supply voltage 380 volt 3/50. Reportedly minimum batch weight 0.16 kg and maximum batch weight 6 kg. New 2005 and last used on 1.5-5 kg batches. Reportedly little used and in excellent condition. Cpjdpfx Ajygvarsbuou

Condition: good (used), Nilma Turboidrex vegetable washer and dryer Cpjdpsh Ut D Dsfx Abuou Serial: 951154 Stainless veg washer and dryer, 90l drum capacity, washing capacity per cycle: leaf veg 4kg - heavy veg, fruit, meat 15Kg, wash time 3min, drying capacity 1Kg per 1min, 1Ph

Condition: used, Year of construction: 2021, functionality: fully functional, compressed air connection: 13 bar, type of input current: AC, volume flow: 390 m³/h, total width: 580 mm, total length: 588 mm, total height: 899 mm, pressure: 13 bar, overall weight: 80 kg, pressure dew point: 3 °C, input voltage: 230 V, ambient temperature (max.): 45 °C, ambient temperature (min.): 1 °C, pressure (max.): 14 bar, power: 0.71 kW (0.97 HP), empty load weight: 80 kg, input frequency: 50 Hz, nominal power: 0.71 kW (0.97 HP), input current: 3 A, air pressure: 13 bar, For sale: 2 industrial refrigerated compressed air dryers – available together or separately We are offering two used industrial refrigerated dryers for compressed air. The units can be sold as a set or individually. Ideally suited for integration into compressed air systems requiring reliable drying and condensate removal. 1. Airgroup AGD 450 – Refrigerated Compressed Air Dryer (2021) General information Brand / Model: Airgroup AGD 450 Year of manufacture: 2021 Serial number: 210008384 Cpjdpoyhdhmjfx Abusu Code: AGD450AC9A085 Technical specifications Nominal flow rate: 450 m³/h Max. working pressure (compressed air circuit): 14 bar Compressed air circuit capacity: 5.9 liters Compressed air temperature range: 2 … 55 °C Refrigeration system Refrigerant: R407C Refrigerant quantity: 0.65 kg CO₂ equivalent: 1.15 t Refrigerant circuit volume: 0.6 liters PS HP / LP: 39.2 / 20.9 bar Refrigerant circuit temperature range: −10 … 120 °C Electrical Connection: 1/230 V ±10% / 50 Hz Power: 0.71 kW Nominal current: 3.4 A Max. current (FLA): 8.9 A Fuse: 10 A Protection class: IP40 Other PED Directive: 2014/68/EU – Cat. I Fluid group: 2 Ambient temperature range: 1 … 45 °C Diagram: WD003 V00 R00 2. ALUP ADQ 390 – Refrigerated Compressed Air Dryer (2014) General information Brand / Model: ALUP ADQ 390 Year of manufacture: 2014 Product number: 4102000802 Serial number: CAI692332 Technical specifications Nominal flow rate: approx. 390 m³/h Working pressure: 13 bar Max. pressure: 13 bar Temperatures Max. inlet compressed air temperature: 55 °C Max. ambient temperature: 43 °C Electrical Connection: 230 V / 50 Hz Power: 1.64 kW Phase: single phase Refrigerant Type: R404A Quantity: 1.35 kg Weight Total weight: approx. 80 kg Sales Information - Available as a set or individually - Suitable for industrial compressed air installations - Ideal for removing moisture and condensate from compressed air Interested or have questions? Feel free to contact us for more information, a quote, or to schedule a viewing.

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % Csdpfsxfkbaex Abuopu - Control cabinet with touch screen display

Condition: used, Year of construction: 2003, Manufacturer : Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Cjdsygndpjpfx Abujpu Year: 2003 Type : Laboratory and pilot freeze-dryer Applications: Dry or liquid drying in vials, bottles, ampoules, flanges, trays, etc. Examples of products: Biological products: bacteria, viruses, tissues, plant extracts / Pharmaceutical products: plasma, serum, antibodies, vaccines / Biochemical tests / Food products: ferments, vitamins General data : Pre-freezing, freeze-drying (sublimation) and final drying Vacuum application, < -10°C 3 + 1 shelves Shelf surface area: 0.3 m². Distance between shelves: 68 mm Software: SCADA Software Cleaning flange Sample extraction system Manual stopper for vials Ice condenser : Capacity: 8.0 kg Performance: 6.0 kg / 24 h Temperature: -75°C Dimensions : Width: 800 mm Depth: 840 mm Height: 1640 mm Weight: ~650 kg Energy data : Power supply: 3-phase, 400 V / 50 Hz Power consumption: max. 5.0 kVA Max. ambient temperature: +25°C Refrigerant : Types : R404A, R508, Isceon 89 Heat transfer fluid: Syltherm XLT Technical connections Warm water inlet: ½" hose connection Defrost water drain: ½" hose connection Vacuum exhaust: DN 25 stainless steel pipe Ventilation: DN 6 connection Others : Documentation and qualifications available Sold with LPC plus computer for data analysis. Spare parts

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 82-15796, input voltage: 400 V, total length: 30,000 mm, total width: 4,000 mm, type of input current: three-phase, plate width: 2,100 mm, plate length: 1,600 mm, Equipment: documentation/manual, See description for all information Fully equipped SAM-X 2-colour machine including feeder, UV dryers, and stacker Year of manufacture: 2001 Csdjygm Hpepfx Abuepu Full information and documentation can be found in the attachments.

Condition: used, Year of construction: 2006, Overview This bottle dryer was manufactured in 2006 by ACI and was integrated into a 30,000 bph PET bottling line to dry PET bottles before labelling. It is in full working condition, already dismantled, stored in a warehouse, and immediately available. Technical Details Capacity: 30,000 bph Formats: 1.5 L PET bottles Application: Drying before labelling Csdpfxjw Rc Idj Abujpu

Condition: used, Year of construction: 2014, Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details Manufacturer: Gesete Model: XT 500 Year of manufacture: 2014 Application: Bottle drying before labeling (Etima) Cpjdpfew N Nkpsx Abueu

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg Cpodpfsxrnn Dsx Abusu

Condition: good (used), Year of construction: 2017, Boge C10 LDR-350 Screw Compressor + Dryer + Receiver tank Manufacturer: Boge Model: C10 LDR 350 Year: 2017 Max. pressure: 10 bar Receiver volume: 350 liter Rate of flow: 1,03m3/min Codpfx Abeyfpk Usujpu Motor speed: 1.500 min Motor Power: 7,5kW Machine Dimensions LxWxH: 1.960x72x1.350 mm Machine Weight: 350 kg.

Condition: used, Used Comessa stainless steel 304 drum dryer/cooler. Drum Ø 2400 x 14000 mm length Drying length: 7000 mm Cooling length: 7000 mm Previous use: drying 30 TPH white sugar Stainless steel feed screw driven by 7.5 kW motor Stainless steel blowing fan 7.5 kW Stainless steel cooling fan 11 kW Stainless steel preheating, drying and cooling batteries Description of the original installation and manufacturer's technical documentation also available. Delivered without: 45 kW shell drive motor/55 kW extraction fan/Steam preheating battery Weight: 21500kg Cpjdpfeyhc N Nsx Abueu Dimensions: diameter 3.35m x lenght 14m

Condition: excellent (used), Item description: Csdpfx Aeyhbc Isbuepu m&h infrared touch probe IRP25.41 SK40 Hexagon ----- Condition of the item: Very good condition and fully functional. Receiver is not included. Requires receiver IRR91.40. The item comes from a company liquidation. Internal number: 26.114