Used Band Turner for sale (4,123)

Condition: excellent (used), Year of construction: 2022, Manufacturer: BIESSE Model: AKRON 1440 A Category: Edge banding machine Year of manufacture: 2022 Availability: short notice Operational status: disassembled/stored Technical data Maximum edge banding thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roller material: 3 mm Minimum workpiece length: 140 mm Minimum workpiece width: 50 mm Minimum feed rate: 12 m/min Maximum feed rate: 18 m/min Feed rate: stepless Height adjustment: motorized Belt overpressure Gluing system: granulate Glue reservoir: top Quick-change glue reservoir Suitable for PUR adhesives Strip magazine Spraying device Edge trimming unit Preheating zone Pressure zone, NC-controlled Miter saw unit: 2 motors Edge trimming/radius/chamfer stations: 1 Corner copying unit: 2 motors Pulling blade unit Profile pulling blade, flat pulling blade Smoothing unit Nesting equipment Edge trimming/radius/chamfer stations, profile pulling blade Units controlled by timer NC axis(es) Hedpfxozb Aico Abgsp Profile change: automatic Edge trimming/radius/chamfer stations Design: left-hand machine Machine length: 5,610 mm Control system: BIESSE SMART TOUCH 23" Conformity marking: CE marking, EAC marking Total connection: 13 kW Weight approx.: 2,250 kg Location: at customer's site - available immediately - As it is disassembled/stored.

Condition: used, cutting diameter 420 mm saw band length 5744 x 1,3 x 41 mm cutting width 420 mm cutting speed 15 - 110 m/min 7,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,9 x 2,4 x 2,1 m Hydraulic band saw machine with Hodpfxjzdk Hgj Abgop - Material feed 1000mm - Motorized saw blade tension - Emergency stop device - Replacement saw bands

Condition: used, Year of construction: 1994, Semi-automatic horizontal bandsaw for solid material and profiles Cutting capacity up to approx. Ø 260 mm Robust cast construction Manual feed and hydraulic cutting cycle Hsdswbfhcspfx Abgop Swivel head for angular cuts Integrated coolant system Ideal for workshops and industrial use

Condition: good (used), Year of construction: 1998, machine/vehicle number: 19362-98, Offer 26154 Technical data: - Cutting range at 90°: - Round: 260 mm - Flat: 410 x 200 mm - Miter adjustable from 90° to 30° - Cutting range at 45° left and right: - Round: 220 mm - Flat: 230 x 300 mm - Material support height: approx. 620 mm - Saw band dimensions: 3660 x 27 x 0.9 mm - Cutting speed: 17 - 106 m/min - Hydraulic lowering of the saw frame - Upper stroke limitation of the saw frame Hsdpfx Aszhaifebgep - Cutting pressure continuously adjustable from 0 to 10 m/min - Material clamping device - Saw band cleaning brush - Total drive power: 400 V / 1.9 kW - Space requirement: approx. W 1300 x H 1800 x D 2000 mm - Weight: approx. 900 kg

Condition: used, Year of construction: 2016, functionality: fully functional, conveyor belt width: 600 mm, total length: 9,770 mm, total width: 770 mm, motor manufacturer: SEW, Equipment: type plate available, Belt Conveyor/Belt Band/Conveyor Belt 9.77 Meters Manufacturer: AMI Year of manufacture: 2016 Condition: used Hodpfoyvhg Dsx Abgop Total length: approx. 9,770 mm Total width including motor: approx. 770 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Belt width: approx. 600 mm Belt type: longitudinal grooves Material: steel Frame height: 300 mm / 80 mm Incl. SEW motor 0.55 kW/rpm 1360/87 The belt must be installed on site Internal article number: 2026031801 The conveying system was operational until dismantling. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packaged Pickup location: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customized offer or advise you on concept development or installation questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies from various industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or complementary components such as picking racks or containers.

Condition: good (used), Year of construction: 2004, functionality: fully functional, total length: 880 mm, total width: 700 mm, Equipment: type plate available, Belt Conveyor/Conveyor Belt Manufacturer: Transtechnik GmbH Year of manufacture: 04/2004 Condition: Used Model type: 80/600 Total length: 880 mm Hjdpfsyg Nqqex Abgop Total width including motor: 700 mm Total width without motor: 650 mm Belt width: 595 mm Belt type: smooth Color: Stainless steel/black Material: Stainless steel/aluminum Frame height: 100 mm Drive type: drum motor Internal item number: 2026013003 Thanks to the excellent workmanship of the conveyor technology, your materials glide smoothly to their destination even under heavy load. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods – we are your experienced partner! We are happy to provide you with a customized offer or advise you on design and installation matters. Simply inform us of your requirements and local conditions. Benefit from our many years of experience and our outstanding network of experts. We have already successfully implemented projects for companies in various industries, such as logistics, pharmaceutical, crafts, and electronics sectors. Together, we will develop solutions to optimize your processes and material flow efficiently and sustainably. We can also offer fully automated sorting technology or additional components such as order picking racks or containers.

Condition: used, functionality: fully functional, conveyor belt width: 300 mm, total length: 5,110 mm, total width: 600 mm, Equipment: type plate available, Belt Conveyor / Conveyor Belt / Belt Band Manufacturer: Schunk Fördertechnik GmbH Condition: used Model/Type: Belt Total Length: approx. 5110 mm Total Width including motor: approx. 600 mm Total Width without motor: approx. 320 mm Conveying Width/Belt Width: approx. 300 mm Belt Type: fabric belt Material: steel/aluminum Frame Height: 100 mm Including Motor: 0.25 KW Including 3 height-adjustable support legs Internal Article Number: 2026032303 The conveyor system was in operation until dismantling. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packed Pickup address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent construction of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for the loading and unloading of your goods, we are your competent partner! We are happy to provide you with a customized offer or to advise you on planning and assembly questions. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in various industries, such as logistics, pharmaceutical, crafts, and the electronics sector. Hsdjywvahopfx Abgjp Together, we will develop solutions to optimize your processes and material flow cost-effectively and sustainably. We can also supply you with fully automated sorting systems or complementary components such as picking shelves or containers.

Condition: used, Year of construction: 2013, functionality: fully functional, conveyor belt length: 2,560 mm, conveyor belt width: 680 mm, total length: 2,560 mm, power: 37 kW (50.31 HP), motor manufacturer: SEW Eurodrive, Belt Conveyor / Conveyor Belt / Belt Band Color: Light Grey Year of Manufacture: 2013 Manufacturer: AMI Fördertechnik Condition: Used Model: Belt/ KGF 65 Total Length: approx. 2560 mm Overall Width incl. motor: approx. 680 mm Overall Width without motor: approx. 620 mm Belt Width: approx. 590 mm Belt Type: Longitudinal Grooves Frame Material: Aluminium Frame Height: approx. 70 mm Including SEW Motor (0.37 kW) In Stock: 6 units Price per unit Collection Address: Industriestraße 5 (47918 Tönisvorst) Internal Article Number: 2026032602 Hedpjyxf Nhsfx Abgjp The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of this conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for the loading and unloading of your goods, we are your competent partner! We are happy to provide you with a bespoke quotation or advise you on design or installation matters. Just let us know your requirements and local conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable way. We can also offer fully automated sorting systems or supplementary components such as order picking racks or containers.

Condition: new, – Semi-automatic – Hydraulic – 2 speeds – Double miter – Hydraulically adjustable saw pressure – Cooling – Saw blade 2730 x 27 x 0.9 mm – Foot pedal control Hedpjh Razfefx Abgjp – Emergency stop – Documentation – 400 V

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Hjdpfxjyqanbe Abgop Location: Röllbach

Condition: used, Year of construction: 1989, Used machine Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Connection load: 3.3 kW Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Pneumatic system: 6 bar Weight: approx. 105 kg Availability: short-term Location: Röllbach Hedswwxykopfx Abgsp

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Machine completely overhauled: - New Glue Jet 301 glue application system (top part 1 mm) - All units inspected - All milling cutters resharpened - All knives replaced Hsdpfxowka Iie Abgop - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrically adjustable feed motor: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy saving function - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 jointing units for panel edge jointing - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper - Pressure unit 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Hedpfev Sv Enex Abgop Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Hedpfx Aowka Nyebgsp Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Hodpfx Aswpm Igsbgep Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Availability: short term

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 with heated infeed rail Gluing station with electronic temperature control and forward/reverse function - Cutting unit - Milling unit - Profiling blade - Cleaning station - Edge thickness 0.4 - 5 mm - Board thickness up to 50 mm - Part length min. 150 mm - Part width min. 60 mm - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (Width can be reduced to 800 mm for shipping by removing the extendable support) Hsdpjkwg Tbsfx Abgjp Availability: by arrangement Location: Hochheim

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit Hsdpfx Abeyncpvsgop - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 2019, Mössner Rekord SSF 801 Band Sawing Machine The most powerful Mössner band saw—deployed when peak performance is required. The ultimate flagship among vertical high-performance band sawing machines. This machine stands for maximum precision, exceptionally smooth operation, and uncompromising durability in continuous industrial use. Standard Band Saw Equipment Band saw stand with robust grey cast iron construction Cutting speeds adjustable via frequency converter and three-phase motor with potentiometer; 2-speed gearbox OR infinitely variable cutting speeds with flange bearing and frequency converter Manual blade tensioning device with hydraulic indicator Tiltable work table – 30° to the right, 15° to the left Replaceable aluminum band wheels with hard rubber facing Adjustable upper band wheel Safety door switches on the band wheel doors Finish: RAL 7035 Light Grey; doors RAL 5005 Signal Blue Technical Data: Manufacturer: Mössner (August Mössner GmbH + Co. KG) Model: Rekord SSF 801 Band wheel diameter: 800 mm Max. cutting width (throat depth): 785 mm Max. cutting height: 670 mm (optionally extendable to 800 mm) Table size: 960 × 1000 mm Max. table load: 750 kg Motor power: 11 kW Cutting speed (gearbox): 26 – 180 m/min and 290 – 2000 m/min Cutting speed (flange bearing): 500 – 2000 m/min Hjdpfx Aozc Uvwjbgop Machine weight: approx. 2,300 kg Dimensions (L x W x H): 2240 x 1080 x 2900 mm Year of manufacture: 2019 New price: €54,000 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, total length: 4,150 mm, overall weight: 1,350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Brandt-Homag KDF 220 Highflex edge banding machine, year of manufacture 2012 from a small carpentry business Last inspection: March 20, 2026 Type: KDF 220 Machine number: 0-261-20-6136 Wiring diagram number: 0-261-20-6136 Year of manufacture: 2012 Supply voltage: 400Y/230 Units controlled via the display Gluing unit: 2 x 2.2 kW Trimming saw unit: 2 x 0.18 kW Flush trimming unit: 2 x 0.27 kW Profiling milling unit: 2 x 0.35 kW WD 40 Hodpfx Aezdb Ivjbgep -additional function: structural base Radius draw knife Straight draw knife Edge thickness: 0.4 - 6 mm Fsbq Uvmsyy S Ade Rnjph Workpiece thickness: 8-60 mm Feed rate: 11 m/min Total power: 16 kW Length: 4150 mm If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, cutting height (max.): 360 mm, cutting width (max.): 360 mm, roller diameter: 360 mm, We are offering this operational KASTO HBA 360 AU bandsaw, manufactured in 1990. Manufacturer: KASTO Model: HBA 360 AU Hsdpfx Ajzfihxsbgep Year of manufacture: 1990 Machine type: Bandsaw Condition: operational If you have any questions or require further information, please do not hesitate to contact us.

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning Hodpfxsqrqvhe Abgjp - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox

Condition: excellent (used), Saw blade length 3450 - 3640 mm Cutting height max. 325 mm Projection/cutting width 405 mm Table size 615 x 615 mm With Ideal BS0/16 saw blade welding device with blade shears and grinding stone Hodpfxszdqg Tj Abgjp Angle-adjustable machine table Cutting speed 16 - 2200 m/min Very well maintained condition

Condition: as good as new (ex-display), Year of construction: 2025, Panhans bandsaw BSB 500 Upper and lower APA II bandsaw guides Tilting table top up to 45° Hjdpfx Absdq D I Hogep Door locking system via limit switch Wheel diameter 500 mm Drive motor 1.5 kW / 2.0 hp 400 Volt motor with motor brake Band speed 1,290 m/min Maximum cutting height 320 mm Maximum cutting width 485 mm Maximum blade length 4,145 mm Table size 500x680 mm Table height 890 mm Dust extraction port 2x100mm Space requirement: 900x525x1925 mm Weight 220 kg CE compliant, GS tested Available in stock at 54634 Bitburg

Condition: new, Year of construction: 2025, machine/vehicle number: C890, PANHANS Bandsaw Hedpfobzmb Hex Abgep Type BSB 600 Stand in modern steel construction, table top made of thick-walled, heavily ribbed cast iron, massive gray cast iron bandsaw wheels Technology: • Upper and lower PANHANS bandsaw blade guide APA II • Finely planed gray cast iron table • Table top can be swivelled up to 20° • Dynamically balanced bandsaw wheels with vulcanized rubber coverings • Fence rail can be used on the left of the saw blade • Fence profile can be folded over • Blade tension indicator • Mechanical height adjustment via handwheel with locking ratchet • Automatic motor brake with main switch and motor protection switch Technical data: • Max. cutting height 380 mm • Max. cutting width 570 mm • Table size (W x D) 590 x 810 mm • Table height 905 mm • Wheel diameter 600 mm • Motor power 2.2 kW • Wheel speed 820 rpm • Max. saw band length 4710 mm • Suction nozzle diameter 2 x 100 mm • Machine weight 272 kg • Machine size (L x W x H) 1120 x 750 x 2125 mm Location: Available in stock, Bitburg Top exhibition price Free loading

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius trimming blade, corner milling cutter, surface trimming blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius trimming blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation incl. glue outlet device, HF miter saw station (approx. 12000 rpm), HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and replaceable blade milling cutter (combination version), corner rounding cutter, radius trimming blade, surface trimming blade (incl. pneumatic lift), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 quick-change preparation for corner milling cutter F5/08/5 additional replacement motor for corner milling cutter with tool set F5/09/4 multi-radius trimming blade (R1/R2) F5/24/1 spray device for release agent F5/24/2 spray device for cleaning agent F5/25 spray device for edge F5/27 nesting for milling cutter and radius trimming blade F5/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) Hjdpfx Ajlht Hwsbgsp Location: Available from stock in 54634 Bitburg - available in week 4 -