Used Band for sale (4,178)

Condition: used, Pulley Diameter 700mm Itsdszd Uuhspfx Aaxjk Max sawblade width 35mm Table size 980mm x 700mm Max blade length 5120mm Table Tilting 0 to 35 degrees Throat capacity 600mm Max. Cutting height 350mm Adjustable rip fence 4 Hp motor and starter Weight 435kg

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Biesse Type: Jade 240 Year of manufacture: 2017 Iedpfx Aaozuyixoxotk Technical data Note: [b]The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.[/i]

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Iodpezuykcofx Aaxetk Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, KASTO bandsaw model SBA 320/500 AU DG in good working condition. Iedpeyi Unaefx Aaxotk Cutting capacity at 90°: approx. 320 mm, square 500 x 300 mm Cutting capacity at +45°: 320 mm, square 340 x 300 mm Cutting capacity at -45°: 320 mm, square 360 x 300 mm Cutting capacity at +60°: approx. 220 mm, square 200 x 200 mm Cutting capacity at -60°: approx. 250 mm, square 240 x 240 mm Max. vice opening: 510 mm Saw band dimensions: 5090 x 34 x 1.1 mm

Condition: good (used), Year of construction: 2014, Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 mm -Transport dimensions: 1640/850/H1560 mm / 2230/800/H200 mm -Weight: 555 kg Isdpfxozuk Sdj Aaxjtk

Condition: excellent (used), Year of construction: 2010, Bandsaw Manufacturer: HEMA Type: SR 600 Year of manufacture: 2010 Roller diameter: 600 mm Cutting height: 380 mm Cutting width: 580 mm Motor power: 2.2 kW Table: 600 x 540 mm Motor brake: Yes Cutting speed: 1,350 mm Itjdpfxoztncko Aaxek Saw blade width: 6-25 mm Table tiltable: Yes, 45° Weight: 270 kg Dimensions: 2,085 x 1,035 x 820 mm

Condition: used, Year of construction: 2012, Softforming edge banding machine with panel cutting device Manufacturer: Elwood Year of manufacture: 2012 Technical data: - Adhesive application system with slotted nozzle - Compatible with EVA and PUR adhesives - Meler adhesive melting and application system - Electronically controlled adhesive temperature and melting time - Panel thickness: 10-60 mm - 2 profiling milling units - IR heating lamps for material preheating - Spray device for release agent - Pressing zone with heated tower pads (can be replaced with pressing rollers) Iedpfjzuyi Sjx Aaxstk - Edge band magazine - Front and rear trimming units - Top and bottom flush trimming units for longitudinal edge overhang (2 at the top + 2 at the bottom) - Top and bottom polishing units - Computer control for quick, easy and precise adjustment of the machine's main functions and units Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: reconditioned (used), Year of construction: 2007, Operating range VB750 Min. / max. height 10 – 450 mm Min. / max. width 50 – 750 mm Sawing machine Capacity (h x w) 0° 450 x 750 mm Capacity (h x w) +/- 15° 450 x 700 mm Capacity (h x w) +/- 30° 450 x 620 mm Capacity (h x w) +/- 45° 450 x 480 mm Iedpfxew Nyu Ss Aaxetk Capacity (h x w) +/- 60° 450 x 300 mm

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Itedpfx Aajzuyk Noxek Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: AE0454, functionality: fully functional, Working area: Round material: 460 mm Ijdpfx Aeztbt Neaxjtk Square material: 460 x 460 mm Band speed: 16 - 120 m/min Motor: 4 kW Blade size: 5730 x 41 x 1.3 mm Machine weight: 3,000 kg Machine dimensions: L=2,800, W=2,400, H=2,100 mm

Condition: used, Year of construction: 2020, Industrial bandsaw CENTAURO SUPERCUT 80 BANDSAW FOR THIN SLICES WITH THE HIGHEST PRECISION The major advantages of a compact and versatile machine for all applications in the field of thin slicing: Thin slicing from 2 mm material thickness Maximum cutting accuracy up to 0.15 mm Minimum cutting kerf from 1.3 mm Ideal for cutting dry and wet wood as well as alternative materials The surface of the thin lamella can be glued directly, without any further post-processing being required User-friendly electronic control Two programmable feed speeds of the conveyor belt from 0 to 30 m/min for optimal cutting quality and a longer service life of the saw blade Optical sensor for starting the cutting cycle and for automatic speed switching Ground work table Flexam feed belt for optimal performance 6 height-adjustable rubber pressure rollers, whose position can be adjusted to open/close, in order to ensure the optimal pneumatic clamping pressure on the workpiece during the feed and cutting process Oleopneumatic saw blade tension for optimal cutting performance Upper and lower Chaco saw blade guides, which ensure optimal stability of the saw blade during the cutting process Internal and external lubrication of the saw blade for removing resin residues and chips 4 dust extraction connections to optimize the extraction of dust and chips Maximum cutting height 400 mm (optional 500 mm) Maximum cutting width 400 mm Powerful quality motor with 15 kW (20 hp) Ethernet interface for online service and remote maintenance Carbide or stellite saw blades for optimal cutting performance Itodpjzvflnefx Aaxjk Maintenance-friendly design and easy service

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, operating hours: 429 h, power: 5 kW (6.80 HP), control type: CNC control, total height: 1,570 mm, total length: 1,755 mm, total width: 2,475 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, KASTO TWIN A2 fully automatic bandsaw machine year of manufacture 2011 sawing hours 429 option for sawing bundles max. round stock 260 mm max. 260 x 260 mm min. round stock 10 mm shortest remaining piece in single-piece operation: 15 mm shortest remaining piece in automatic operation: 100 mm max. length of single movement: 750 mm max. length of multiple movements: 20,000 mm sawing speed, infinitely adjustable sawing pressure, infinitely adjustable clamping pressure, infinitely adjustable carbide guides chip conveyor Itodpfozb Dhmox Aaxek roller conveyor, 4 meters 4x bandsaw blades (3x new) documentation machine is powered on for inspection

Condition: excellent (used), Year of construction: 2012, Horizontal conveyor 2500x410 mm year 2012 price: € 1,750.00 Itjdjznb Ebjpfx Aaxsk contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2012, power: 3.7 kW (5.03 HP), Well-maintained, semi-automatic bandsaw, Knuth, type HB 380, manufactured in 2012. Cutting capacities: Cutting capacity 90° (rectangular): 520x380 mm Cutting capacity 90° (round): 380 mm Cutting capacity 90° (square): 380 mm Cutting capacity 45° (rectangular): 300x380 mm Cutting capacity 45° (round): 300 mm Cutting capacity 45° (square): 300 mm Ijdpfsyxw H Eex Aaxstk Cutting speed: 20 - 100 m/min Power: 3.7 kW Band dimensions: 4,800x34x1.1 mm Dimensions: 2,850x1,660x930 mm (W x H x D) - Hydraulic workpiece clamping - Automatic stroke height adjustment Shipping can be arranged upon request. #8530

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min - 54 mm band - Clamping device for saw sections - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) Isdpfxezubxhs Aaxotk For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm Ijdpfx Aaozuyp Ejxotk - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Itsdpezuyhhsfx Aaxek Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: excellent (used), Year of construction: 2016, cutting height (max.): 560 mm, cutting width (max.): 560 mm, Equipment: CE marking, KASTOwin A 5.6, manufactured in 2016, available for immediate delivery from stock. - Currently undergoing refurbishment – see photos, including all repairs and a major inspection. - Additional chip conveyor, zero-point start, see attachments. Iodjzhtv Ejpfx Aaxstk

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Itedpfx Aajzgwzvoxsk Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: like new (used), Year of construction: 2021, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, total length: 4,412 mm, Equipment: documentation/manual, We are offering this like-new Format4 tempora F600 60.06L edge banding machine, manufactured in 2021. It features sharp pre-milling cutters, AdvantEdge zero-joint technology, X Motion PLUS control system, interchangeable glue tank, a 2-motor corner rounding unit, spraying system, polishing unit, etc. The 'Nesting' package also ensures that banding can be applied along pre-drilled holes and other cutouts. This is a very complete and well-maintained machine in excellent condition. It is being sold due to a change in business activities. The machine can be inspected while in operation. Manufacturer: Format4 Model: tempora F600 60.06L Iodpfx Aszt Dkkoaxstk Year of manufacture: 2021 Condition: like new Category ID: 877 Type ID: 664 Machine type: edge banding machine If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 101-335, functionality: fully functional, Machine available starting in early October 2026. The machine can be inspected and demonstrated at the customer's site. Workpiece thickness: 8 - 60 mm Workpiece length: min. 160 mm Feed rate: 10 m/min -extendable workpiece support -motor-driven pressure bridge, PLC-controlled -1888 control panel PPC 231 U+E -1801 joint milling unit incl. 2 joint milling cutters 70x64x30 -1903 edge feeder, fully automatic -GJ 301 Glue-Jet adhesive application system incl. sensing nozzle and cartridge magazine for EVA & PUR adhesive cartridges -1912-3 printing unit, pneumatic -1918 trimming unit with pneumatic swivel 0 -12° via PLC -1827 milling unit, motor 4, pneumatic, via PLC 1832 profile milling unit (Auriga SPS) 1929 radius scraping unit, motor 2, SPS 1964 surface scraping unit 1856 release agent application at the front, cleaning agent application at the rear, spraying 1940 wiping unit Overall length: 4930 mm Iedszg Upwjpfx Aaxstk Weight: approx. 1430 kg

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: Iedpfeztazfex Aaxstk HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: used, Year of construction: 2009, Bi-Matic Dynamic 4.5.S.7 (year of manufacture 2009): Dimensions of processed material: Edge thickness: 0.4 – 3.0 mm (in coils), up to 5 mm (in strips). Part thickness (panels): 8 – 50 mm. Minimum part width: 60 mm. Minimum part length: 90 mm. Operating parameters: Working feed speed: 7 m/min (constant speed of the feed belt). Working air pressure: 6 bar. Adhesive heating time: approx. 5–6 minutes (Teflon bath). Itsdpfx Aszvfdwjaxek Automatic edge banding machine, application zone, pressing zone, single-motor edging on THK guides, tilting milling unit, radius cutter, brushes. The machine is still in operation. Available for immediate pickup.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. Itjdpszlqvqofx Aaxek For slats from 2 mm * same as new *

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 Itsdju U Ii Espfx Aaxok price: €2,450.00 contact: Mr. Rainer Eckerle