Used Bandmesser Textile for sale (705)

Condition: good (used), Year of construction: 2007, power: 9.1 kW (12.37 HP), Manufacturer: Ilsa Multimatic Type: Topline 320 Designation: Cleaning machine Distillation module: VD160 Tank volume: 320 L Fsdpjw I Ddhjfx Ahpjgd Spin speed: 550 rpm Power: 9.1 kW Year of manufacture: 2007

Condition: used, mileage: 209,254 km, power: 390 kW (530.25 HP), first registration: 03/2023, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 03/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, soot filter, DAF FT XG+ 530 Adjustable roof spoiler for XG+ cab Technically permissible chassis weight max. 19,500 kg LED headlights, cornering lights and fog lights Longitudinal frame members 260/6.0 mm, without inner reinforcement Wheelbase 4.00 m / rear overhang 0.99 m JOST JSK37C fifth wheel, cast iron, 150 + 26 mm Upper sleeping bunk Side skirts with upper/lower extension Air-suspended cab Rear: SR1347 air suspension Fgsdpfxexitmmo Ahped Pneumatic control for parking brake Maneuvering mode Idle shutdown automatic, 5 minutes FMS connector, extended and prepared Armrests on both sides of driver’s seat Armrests on both sides of passenger seat Rear axle load capacity 13.00 t 12-speed TraXon gearbox 12TX2620 DD, 16.69-1.00 Laminated glass with sun protection film Integrated stationary air conditioning Passenger side sunblind Rear axle ratio 2.40 Wireless charger Dashboard version: Plateau Front leaf suspension: standard Interior trim color: Exclusive Driver’s seat with swivel base Additional cab insulation Auxiliary heater with waste heat pump and timer Passenger seat with swivel base Cab interior trim: Argenta Steering wheel, leather, Exclusive Front: 8.00 t, parabolic, 163N 2-cylinder compressor without clutch Dashboard table Automated gearbox with manual mode – full version Chassis front version: Aero floor plate Windshield with sun protection film Fifth wheel kingpin diameter: 2 inch Rear LED lights Preparation for air pressure device Extended side fenders Stabilink rear axle suspension Driven rear axle(s): 315/70 R22.5 Emission class Euro 6 Front air intake Max. combined towing weight drive axis: 50,000 kg, class 3 Traction control (ASR) Plus-Drivetrain warranty – 3 years – 500,000 km Two refrigerators Mattress with topper for DAF Relax Bed LED interior lighting: Exclusive Roof hatch with electric control Drive rear axle with disc brakes Single ride height position, standard height KA saddle offset: 620 mm Storage compartment with drawer in center console Front underrun protection Pneumatic connection for trailer, rotating coupling Exhaust pipe horizontal, low Body connector on chassis Speed limiter set at 90 km/h Automatic cab climate control Left side catwalk step Work lights, LED Standard transport, full version Automated gearbox, TraXon, 12 speeds ECO performance Heated fuel pre-filter DAF Connect Fuel tanks left and right Adaptive cruise control with FCW and AEBS-3 Front axle 1, 8,000 kg, load index 156 Whole vehicle type approval (WVTA) Rear axle 1, 12,600 kg, load index 148 Battery energy monitoring Standard maintenance interval Safety net on both bunks Door trim: leather Cab wall trim textile Application class 0 Standard chassis preparation Electronic Stability Control (VSC) Preparation for toll system Operation of fixed fifth wheel Standard noise level Lane departure warning system ITS service Electric windows Pollen filter LED daytime running lights Driver Performance Assistant CO2 display: Y F1,385/55R22.5GO KMAXS2 160/000 K Steering BBA R1,315/70R22.5GO KMAXD2 154/150 L Traction CBA RR, not applicable w/o function: mirror housing color Central locking, 3 keys, 2 remote controls Alternator 150 A, batteries 2 x 210 Ah AGM EAS unit right, rear overhang 85 l mudguard left Electrical connection trailer 24V/15-pin cable: 15-pin + EBS ks: 845 step left + 340 right, height 620 mm Alcoa Dura-Bright aluminum wheels 26 mm Netzan

Condition: used, Working widths 4600 mm Roller width 4800 mm Number of rollers 2 x S-Walze Stück Swimming roll - dia 350 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 24 to Capacity of dye tub ca.130 Liter Cloth guiding system for woven goods geb. Breithalter vor Fuge Drive shaft ohne Antrieb • Dyeing padder with two "Swimming Rolls", horizontally arranged, Fsdpswva Hcjfx Ahpjgd • with liquor trough with guide roll and displacer, • Machine will be completely overhauled before delivery. We supply with guarantee. (Photo shows a similar machine after overhauling) • New drive can be designed according to case of operation, • extra charges: EUR 10,000.00 to 12,000.00 • Guarantee period: 6 months

Condition: used, Year of construction: 2025, Working widths 4200 mm Fjdswva E Sjpfx Ahpsgd Roller width 4400 mm Number of rollers 2 x S-Walze Stück Swimming roll - dia 350 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 22 to Capacity of dye tub ca.130 Liter Cloth guiding system for woven goods geb. Breithalter vor Fuge Drive shaft ohne Antrieb • Dyeing padder with two "Swimming Rolls", horizontally arranged, • with liquor trough with guide roll and displacer, • Machine will be completely new. We supply with guarantee. (Photo shows a similar machine after delivery) • New drive can be designed according to case of operation, • extra charges: EUR 22.000 • Guarantee period: 7 months

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1522, We are offering this well-maintained H&H AI 008 hot air taping machine, manufactured in 2015. Manufacturer: H&H Fgodpfx Ahszdy Rbepjd Model: AI 008 Year of manufacture: 2015 Condition: good Category ID: 677 Type ID: 2467 Machine type: Hot air taping machine If you have any questions or require further information, please do not hesitate to send us a message or call us. The machine is located at our production facility in Mönchengladbach and can be inspected and tested there during normal business hours. It was in use in our production facility until recently. It is perfectly suited for waterproof seam sealing.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, number of ink cartridges: 7, color channels: CMYK + Light Cyan/Magenta + Latex Optimizer, number of print heads: 6, resolution (max.): 1,200 dpi, paper width (max.): 1,630 mm, Equipment: documentation/manual, For sale due to a new purchase (available immediately): HP Latex 365 large-format printer in excellent condition (only the drive belt needs to be replaced (defective since 06/18/2026) / therefore, the price has been reduced). This 64" roll-to-roll latex printer has only printed 8,708 m² over its entire lifespan – a fraction of what this machine can handle. Virtually new in terms of wear and tear. The HP Latex 365 is a versatile production printer suitable for both indoor and outdoor applications. Thanks to the water-based HP Latex inks, the prints are odorless, dry immediately after production, and are GREENGUARD GOLD certified for use in sensitive environments such as healthcare facilities, schools, and offices. Technical specifications: - Print width: up to 1.63 m (64") - Ink system: 6 printheads, 7-color HP 831 (CMYK + Light Cyan/Magenta + HP Latex Optimizer) - Ink cartridges: 775 ml - Print resolution: up to 1200 × 1200 dpi - Production speed: up to 91 m²/h (max), 31 m²/h outdoor production, 17 m²/h indoor quality - Media handling: roll feed, take-up reel, automatic cutter - Built-in i1 spectrophotometer for automatic ICC color calibration Fgedpfx Ahjy Nngqepod - Control panel: 8" touchscreen - Connectivity: Gigabit Ethernet, HP Latex Mobile App supported - Suitable for: banners, self-adhesive vinyl, films, paper, wallpaper, canvas, synthetics, mesh, textiles – including porous fabrics via the included ink collector. Included: - HP Latex 365 printer - incl. Caldera 14.1 RIP with driver - Take-up reel / winding system - Ink collector kit for textile applications - Spindle, edge holders, loading accessory - User documentation and power cables - Any remaining ink supply can be discussed Reason for sale: switching to a larger production machine. Inspection and demonstration possible by appointment. Delivery and installation assistance available in the Benelux region for a fee.

Condition: used, Dürkopp overhead hanging bag conveyor system for a 90 x 20 m area, including 50,000 matching bags for the rail system. Suitable for the transport of overhead hanging bags in logistics, shipping, textile, and distribution centers. Fsdpfxezdvp Tj Ahpegd Manufacturer: Dürkopp Fördertechnik Machine type: Overhead hanging bag conveyor system Design: Automated conveyor system Conveying principle: Rail-guided hanging bag conveying Dimensions: approx. 90 x 20 m Rail system with curves and switches Electric drives available Control and conveying elements available Industrial design At least 50,000 hanging bags are also included in the offer. Condition: Used Location: Pforzheim Price per level, additional levels available that can be interconnected.

Condition: new, Year of construction: 2012, Heating: Electric Dimensions (W x D x H): 2134 x 598 x 1092 mm Roller diameter: Ø 330 mm (13 inches) Ironing width: 1504 mm (59.2 inches) Hourly output: 34 kg/h Evaporation rate: 17 liters/h Roller speed: 1 to 6 m/min Moist air flow rate: 350 m³/h Noise level: 55 dB(A) Thermal leakage rate: 3% Foot threading type: M10 Weight: 447 kg Fgodpfx Aow El Azehpod Packaging volume: 2 m³ Electric power: 20.7 kW Voltage: 400 V / 29.1 A / 3ph + N / 50/60 Hz Year of manufacture: 2012

Condition: excellent (used), For sale: Constantin Hang 162.01 electric riveting/eyeleting machine from a reputable German manufacturer. This machine is designed for making riveted joints and installing eyelets in paper, cardboard, leather, fabrics, tarpaulins, and other materials. Its robust construction and precise head ensure high accuracy and repeatability. Fodpfx Aeziqg Dehpogd Technical specifications: * Manufacturer: Constantin Hang Maschinenfabrik * Model: 162.01 * Serial number: 40 031 * Country of origin: Germany * Type: electric riveting/eyeleting machine * Control: foot pedal * Drive: electric * Large work table with guides * Stable construction * Working head marked: 24/4 × 6–8 * Working reach: approx. 620 mm Applications: * Installation of metal eyelets, * riveting of components, * production of binders and folders, * bookbinding, * leather goods, * textiles, * banners and tarpaulins (with appropriate tooling), * production of technical components. Condition: * Used. * Functional. * Shows normal signs of use, as visible in the photos. * Sold in the exact condition as shown in the photographs.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 3820221000205, overall weight: 139 kg, total width: 600 mm, total length: 1,130 mm, total height: 1,530 mm, input voltage: 400 V, type of input current: three-phase, power: 4 kW (5.44 HP), Nilfisk Three-Phase Industrial Vacuum Cleaner T40W LP FM Fjdsymx Hujpfx Ahpsgd The three-phase industrial vacuum cleaners T40W are designed for demanding cleaning tasks in commercial and industrial environments. This wet and dry vacuum cleaner comes equipped with a powerful side channel blower, making it suitable for continuous operation. T40W LP FM The three-phase industrial vacuum cleaners T40W are built for heavy-duty cleaning applications in commercial and industrial settings. This wet/dry vacuum features a robust side channel blower and is intended for continuous use. Suitable for deployment in the metal and chemical industries, construction, rubber, plastics, and porcelain processing industries, food sector, textile industry, packaging area, as well as all types of workshops. The rugged and durable all-steel construction with powder coating ensures a very high standard of quality. Thanks to a compact chassis with large wheels and swivel casters, the industrial vacuum is easy to maneuver. High-quality star filters with long service life guarantee excellent filtration performance, even for fine or problematic dusts. The very ergonomic handling, thoughtfully designed emptying options with 50-liter or 100-liter waste containers or Longopac, and manual filter cleaning make the T40W industrial vacuums efficient cleaning tools for plant or machine cleaning. In addition to solid materials, liquids or oils can also be vacuumed. The quiet, maintenance-free 4.0 kW three-phase motors are designed for continuous operation. The T40W provides increased air performance.

Condition: used, mileage: 283,000 km, power: 355 kW (482.67 HP), first registration: 05/2023, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XG 480 CRYSTAL WHITE Headlamp beam pattern for right-hand traffic Longitudinal frame members 260/6.0 mm, without inner reinforcement Fedpfxjx I T I Re Ahpsgd Wheelbase 4.00 m/rear overhang 0.99 m Maximum ambient temperature 38°C Steering system with EU certificate Single-circuit steering Standard component arrangement Rear: Air suspension SR1344 Main mirrors Pneumatic control for parking brake Type plate: Standard (EC) Shunting mode FMS connector, extended and prepared XG cab JOST JSK42, cast iron, 150 + 12 mm Armrests on both sides of the driver’s seat Rear axle load capacity 13.00 t 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 LED skylights Left-hand drive Hardened glass Dashboard style: Flat Front leaf suspension: standard Headlamps without height adjustment Interior trim color: Exclusive Driver’s seat, fixed base Additional cab insulation Passenger seat, fixed base Auxiliary heater with heat recirculation pump and timer Cab interior decoration: Hexagon Front: 8.00 t, parabolic, 163N Compressor 2-cylinder w/o clutch LED interior lighting Dashboard table Automated transmission with manual override – full version Front chassis spec: Floor panel Basic immobilizer Central exhaust pipe Digital tachograph, VDO 1C, version G2V1 Windshield Kingpin diameter 2 inches Rear lights with bulbs Stabilink rear axle suspension Driven rear axle(s): 315/70 R22.5 Emission standard Euro 6 Seat belts black Front air intake Permissible chassis weight max. 20,500 kg Max. permissible gross train weight 44,000 kg, class 2 Silver-grey wheel trim rings Chassis color anthracite grey ASR (traction control system) Headlamp surround color: Crystal White CRYSTAL WHITE Roof spoiler color: Crystal White Fixed cab entry Side fender color: Crystal White Side skirt color: Crystal White Bumper color: Crystal White Drive rear axle with disc brakes One ride height position, standard height Fifth wheel sliding lead 620 mm Rear mudguards Splash guards Front underrun protection Pneumatic connector for trailer, rotary coupling Catwalk with step, standard Exhaust pipe horizontal, low Body connector on chassis Steel disc wheels, silver-grey Speed limiter setting: 90 km/h Catwalk step left Work lights, LED Standard transport, full version Automated gearbox, TraXon, 12 speeds ECO performance Heated fuel pre-filter DAF Connect Rear axle ratio 2.38 Fuel tanks left & right Adaptive cruise control with FCW and AEBS-3 Front axle 1, 8,000 kg, load index 156 Whole Vehicle Type Approval (WVTA) Rear axle 1, 13,000 kg, load index 149 Standard maintenance interval Safety net on both bunks Door trim: loosely woven fabric Cab wall lining textile Application class 0 Standard chassis preparation Electronic stability control (ESC) Toll system preparation Non-sliding fifth wheel operation Standard noise level Lane departure warning Electric window lifters Pollen filter LED daytime running lights Driver Performance Assistant CO2 display: Y Adjustable roof spoiler for XG cab Central locking Alternator 110 A, batteries 2 x 210 Ah AGM EAS unit right, rear overhang 85 l AdBlue mudguard left LED headlamps and fog lights Electrical connection trailer 24V/15-pin cable: 15-pin + EBS ks: 765 step left + 430 right, height 620 mm Antennas: DAB prep. radio, 2x mobile, GNSS-extra: CB Upper bunk Analog transmission PTO control, k

Condition: used, Year of construction: 2010, MERLIN SK 613 Humidification System, approx. 2010 ----- Consisting of: - 1 x Pre-filter and water softener - 1 x Water hydraulics (high-pressure pump) - 2 x Humidity sensors - 6 x Humidifier modules RG Fedpfjyn R H Nex Ahpegd - 14 x Humidifier modules MD 1 ----- Original price was approx. €24,000 (excluding installation) (Technical specifications according to the manufacturer, without guarantee!)

Year of construction: 2021, condition: good (used), CARTES CE 162 HH - Machine Series: CE160 - Year of Manufacture: 2021 - Serial Number: 216359 Technical Specifications Input and Unwinding Unit: - Integrated unwinder with web tension control - Overprinting photocell for precise register alignment Hot Foil Embossing Stations: - First station: Hot foil stamping unit with transverse foil feed - Second station: Hot foil stamping unit with transverse foil feed Cutting and Processing: - Ultrasonic cutting unit for resin-free textile labels - Maximum web width: 80 mm - Independent cutting mode enabling cuts after each print or every 2nd, 3rd, 4th, or 5th cycle Control and Operation: - Integrated silk screen printing unit (SN 161) - Touchscreen interface for intuitive machine control Fodpfx Ahsycv Hkopjgd Drying and Accessories: - Infrared drying oven suitable for conventional and specialty screen printing inks - Overprinting photocell for register accuracy Additional Equipment: - Longitudinal slitter with three adjustable pressure knives - Additional slitting units Why Choose This Machine? The CARTES CE 162 HH is a high-end hot foil embossing platform engineered for converters who require exceptional precision, reliability, and versatility. Thanks to its dual hot stamping stations, advanced register control, and robust CARTES build quality, it ensures outstanding foil application even at high production speeds. This machine is the premium solution for producing high-value labels in the wine, spirits, cosmetics, and pharmaceutical sectors.

Condition: ready for operation (used), Year of construction: 2002, Offered is an automatic Saurer shuttle filling station for automatic emptying, filling, threading and adjustment of embroidery shuttles. Operating pressure: approx. 6bar, Capacity: approx. 144cycles/h, Magazine capacity: 100, Air consumption: 150Nl/min, Precision of the electronic bobbin thread tension measurement: 0.1mN, Control system: PLC. Machine dimensions X/Y/Z: approx. 3170mm/1100mm/1900mm. Inspection by appointment possible. Fjdpfx Aezg Irljhpegd

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: BT 1335 LH, feed length X-axis: 250 mm, feed length Y-axis: 160 mm, Global BT 1335 LH Programmable Cylinder Bed Pattern Stitcher – Leather, Bags, Shoes – Approx. 100 Hours – Excellent Condition For sale due to a change in business focus from production to consultancy: a Global BT 1335 LH programmable cylinder bed pattern sewing machine / electronic pattern stitcher in excellent condition. The machine was purchased new at the end of 2023 from the official Global dealer, Wim Vinken BV, and has only been used for approximately 100 hours. It has been operated in a clean, professional environment and is ready for immediate use. The original dealer quotation from 2022 shows a new price of €11,500 excl. VAT for the complete setup. (See file uploads) Suitable for: Bags, shoulder straps, shoes, leather goods, upholstery, technical textiles, labels, reinforcement stitching, and repeatable stitch patterns on medium to heavy materials. Key benefits: – Programmable electronic pattern stitcher with cylinder bed – Suitable for medium and heavy materials – Sewing area: 250 × 160 mm – Patterns can be loaded via USB / software – Supports file formats such as DXF, NSP, DST, SEW, and EMB – 220–240V single-phase power supply – Complete with original table, stand, and bobbin winder – Very low usage: approx. 100 hours – Working demonstration possible by appointment – Available immediately in Urmond, The Netherlands – Assistance with loading/transport possible by arrangement Technical details: Manufacturer: Global Model: BT 1335 LH Serial number: 2110235 Year of manufacture: 2021 Purchased new: End of 2022 Operating hours: Approx. 100 Max. sewing speed: 1200 stitches/min Max. stitch length: 12 mm Presser foot lift: Max. 16 mm Clamp lift: Up to 22 mm pneumatic Needle type: DPx17 Power supply: 220–240V, single phase Sewing area: 250 × 160 mm Condition: Excellent, fully functional Included: – Complete machine – Original table and stand – Bobbin winder – Documentation / purchase invoice if required – Demonstration by appointment Fedoyr Nv Djpfx Ahpsgd Reason for sale: We no longer use this machine because we have ceased our production activities and now focus on consultancy.

Condition: used, Year of construction: 2014, operating hours: 18,700 h, overall weight: 27,000 kg, number of blades: 41, rotor length: 1,800 mm, power: 200 kW (271.92 HP), rotational speed (max.): 87 rpm, input voltage: 400 V, Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without heavy contaminants. Applications: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal recovery or material recycling, whether loose or baled. Lindner Jupiter 1800 Drive power: 1x 200 kW (ABB) Screens: SK 80 mm Control cabinet: complete with (ABB frequency inverter) Recooling unit: Yes, included Feed opening: 1790 x 1750 mm Filling volume: approx. 4 m³ Rotor length: 1770 mm Rotor diameter: 745 mm Rotor speed: 50Hz : 87 rpm Number of rotor knives: 41 pcs Knife dimensions, pointed knives: 87x87x38 mm Counter knives, lower: 5 pcs Scraper comb, upper: 5 pcs Hydraulic feed: 11 kW Fedpfxew Tk Uds Ahpogd Weight: approx. 27 t Dimensions LxWxH mm: 4800 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Fgjdpsyu Undofx Ahpjd Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Fodewxmb Eopfx Ahpjgd Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Fgjdpfx Ahov S Hyvoped Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Two discharge belts available as an option.

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Fedpfx Aow Tk E Ajhpsgd Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rotor length: 2190 mm Rotor circle diameter: 745 mm Rotor speed: 50 Hz: 58 rpm Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 32 h, load capacity: 1,250 kg, lifting height: 4,300 mm, fuel type: diesel, construction height: 1,930 mm, empty load weight: 2,750 kg, drive type: Diesel, construction width: 1,490 mm, Rigid telehandler Technical condition: very good Front tyres type: pneumatic Front tyres size: 31X15-15 Front tyres condition: 80 - 100% Rear tyres type: pneumatic Rear tyres size: 31X15-15 Rear tyres condition: 80 - 100% Fjdpfxjvgh R Ee Ahpegd Quick coupler, 3rd hydraulic valve, rear work lights, front work lights, heater, solenoid valve, fully enclosed cab, CE certificate, safety light. Image may be for illustration purposes. Rubber floor mats, air-suspended seat with textile cover (Grammer Pack Comfort version), EN 15000 Easy Link standard module, cab with heater, roof and rear window wipers, sun visor on front windshield and roof, height-adjustable steering column, car radio tuner 50W, wheel chock, TÜV prep, 25 km/h, rear and roof window wipers, LED beacon, compact road lighting front and rear, solenoid valve for 1st function, hydraulic quick coupler system, sun visor on windshield and roof.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 220 h, load capacity: 4,100 kg, lifting height: 7,600 mm, fuel type: diesel, construction height: 2,420 mm, fork carriage width: 50 mm, empty load weight: 9,160 kg, drive type: Diesel, construction width: 2,390 mm, Telescopic handler rigid Technical condition: New Front tire condition: 80 - 100% Work lights rear, work lights front, full cab, safety light, Fgodpfx Ajwqtx Uohpsd Image serves as symbolic representation. Electrically heated mirrors, intelligent hydraulics, LED ASW AM, telescopic RL Easy Connect System ECS, regenerative hydraulics, vibration damping, hydraulic quick-change system, tilt function deactivation, JSM, LED 4 additional work lights, LED work lights front and rear on cab, 2x LED street lighting front, car radio USB, Bluetooth with external microphone 100W, Safeview camera pack x2 rear right side, automatic climate control, air-cushioned textile low frequency seat Grammer, Pack Elite, automatic wheel alignment, 7-inch screen, manual hand throttle, Eco Stop, flow limiter, height-adjustable automatic trailer hitch 40mm pin, TÜV prep, 40 km/h, electrical connection on boom head, accessory kit, return line, completion kit trailer hitch, Easylink STD module, wheel chocks, operating instructions

Condition: ready for operation (used), Global HS-8307 Hot air welding machine Automatic strip cutter You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Fgodpfx Asvaxfajhped Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), BM5139 High Qaulity paper drilling machine. Professional production equipment standing model electric operated - foot pedal triggered heavy duty construction For paper, plastic, textiles, leather - two speed drilling. With automatic lift - two button or foot pedal operated. You are welcome to test this machine with us. We can arrange transport/packaging and loading onto truck or in container. Ask for our price - but your offers are also welcomed. Fgsdpov Idfnofx Ahpjd

Condition: ready for operation (used), Year of construction: 1985, A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement. Fgjdpfezf Nb Sox Ahped