Used Bandsaw Mill for sale (10,168)

Condition: used, Year of construction: 1987, FRIEDRICH DECKEL PRECISION MILLING MACHINE Fpodpfjzv Eg Sjx Al Sjn MODEL: FP4M YEAR: 1987 approx. HEIDENHAIN DIGITAL READ OUT CLEAN

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm Fedpfxjz Nxwis Al Sopn • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled • Table length: 36.0 in / 914 mm • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 1989, Available immediately ex-works: Tool milling machine MAHO Type MH 500 M Year of manufacture 1989 Heidenhain digital display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Fpodpez Ixlcsfx Al Sjn Quill travel 50 mm Travel distances X/Y/Z 500/380/350 mm Drive 3 kW Feeds 10 – 1000 mm/min Coolant system Weight 1600 kg Accessories: Hydraulic vice Price: Euro 2,500.00 plus VAT, ex-works.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Fedpfxor Hr Are Al Sspn Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Control system: Siemens Travel range X-axis: 300 mm Travel range Z-axis: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Fjdpfjz Ri U Iex Al Sepn Spindle bore: 76 mm Includes driven tools Number of positions in the tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Mini Mill was manufactured in 2024. It features an X-axis travel of 406 mm, Y-axis travel of 356 mm, and Z-axis travel of 381 mm. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Spindle Nose to Table (~ max): 19.0 in (483 mm) • Spindle Nose to Table (~ min): 4.0 in (102 mm) • Spindle Max Rating: 10.0 hp (7.5 kW) • Spindle Max Torque: 45.0 ft-lbf @ 500 rpm (61.0 Nm @ 500 rpm) • Spindle Drive System: Direct Speed, Belt Drive • Bearing Lubrication: Grease Packed • Cooling: Air Cooled • T-Slot Width: 0.626 in to 0.630 in (15.90 mm to 16.00 mm) • T-Slot Center Distance: 4.33 in (110 mm) • Number of Std T-Slots: 3 Fodpfx Ajz Nywkol Sepn • Max Cutting Feedrate: 650 ipm (6.5 m/min) • Rapids on X / Y / Z: 800 ipm (20.3 m/min) • Axis Motors Max Thrust (X, Y, Z): 2000 lbf (8896 N) • Tool Changer Type: Carousel • Max Tool Diameter (full): 3.5 in (89 mm) • Max Tool Length (from gage line): 12.00 in (305 mm) • Tool-to-Tool (avg): 4.20 s • Chip-to-Chip (avg): 5.00 s • Coolant Capacity: 45 gal (170 L) • Air Required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi (5.5 bar) • Input AC Voltage (1 Phase): 220 VAC, Full Load Amps: 40 A • Input AC Voltage (3 Phase Low): 220 VAC, Full Load Amps: 25 A • Input AC Voltage (3 Phase High): 440 VAC, Full Load Amps: 13 A • Domestic / Export Pallet Dimensions: 90.0 in x 80.0 in x 92.0 in (229 cm x 203 cm x 234 cm) • Shipping Weight: 4450 lb (2018.5 kg) Additional equipment • Renishaw Wireless Intuitive Probing System (WIPS) with OTS table probe installed • Flexible coolant nozzle assembly Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2014, x-travel 620 mm y-travel 420 mm z-travel 400 mm turning speeds 50- 4000 U/min total power requirement 17,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,0 x 2,7 x 2 m Description: - excellent condition - Heidenhain ND780 digital readout - infinitely variable speed control - infinitely variable feed drives - hydraulic tool clamping - mechanical handwheels - electronic handwheel - drilling quill - horizontal milling spindle - coolant system X-travel 620 mm Y-travel 420 mm Z-travel 400 mm Spindle taper ISO 40 DIN 69871A Spindle speeds 50 - 4000 rpm Table size 800 x 400 mm Table load 400 kg Feed rates infinitely variable, max. 2000 mm/min Rapid traverse 5 / 4 m/min Drive power - milling spindle (S1) 10.5 kW Fpjdpfsz N Hwkox Al Sjn Quill stroke 80 mm Coolant system Operating voltage 400 V Total power requirement 17.5 kW Machine weight approx. 1.9 t Space requirement approx. 2.00 x 2.76 x 2.05 m

Condition: used, Year of construction: 2017, operating hours: 15,218 h, functionality: fully functional, machine/vehicle number: 5639, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,600 mm, travel distance Z-axis: 1,900 mm, position of the milling head: 0.001°, mount diameter: 50 mm, rotational speed (max.): 4,000 rpm, torque: 2,000 Nm, coolant supply: 70 bar, spindle motor power: 60,000 W, Equipment: documentation/manual, rotational speed infinitely variable, SORALUCE CNC gantry milling and boring center with complete equipment x-10000mm y-3600mm z-1900mm - Automatic indexing milling head H 342 0.001° x 0.001° - Additional long angular head 90° - Capto C6 tool holder, horizontal/vertical with automatic tool clamping - Main drive 60KW 2000Nm - Machine weight 80 t - Safety package for the rear machine area - Safety package for the working area - Heidenhain iTNC 640 - Dynamic Active Stabilizer - Cross-axis compensation - Automatic head changing system - Milling slide extension z-1900mm - High-performance milling head 4000 rpm 1531Nm 0.001° x 0.001° - Additional long angular milling head 90° 2000 rpm 700Nm - Capto C8 turning tool holder horizontal / vertical with automatic clamping - Fixed storage station for 8 heads - Heidenhain handwheel - Coolant tank 200 liters - Automatic tool changer 120-fold - Increased tool weight 35 Kg - SORALUCE rotary table, diameter 3500mm with 2000mm travel, payload 40 t - Measuring probe M+H - Tool measurement M+H - Adaptive Control Fsdsz Iy Irspfx Al Sopn - Industry 4.0 machine status in real time - Swivel machining - 3-sided complete splash guard for the rotary table - Plate table 5000x3000x300mm - Chip conveyor - Teleservice remote diagnostics - 3D volume model - Interpolation turning HEIDENHAIN

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Turning diameter: 660 mm Max. turning length: 995 mm Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. Fpsdpfjz Ndu Eox Al Sjn About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Max. turning diameter: Ø 560 mm Fpodpfx Alsz Ibaio Sjn Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: used, machine/vehicle number: 55191-08, equipped with a 2-axis digital display, manufactured by HEIDENHAIN, with an angular milling head, 2 indexing tables, an additional clamping table, counter support, 3-jaw chuck, various change gears, machine light, and a steel transport cart. Fsdpfxjz Nhndj Al Sepn

Condition: used, Year of construction: 2007, Manufacturer IXION GmbH & Co. KG, Germany Model / Type TLF 1004 Machine type CNC deep drilling and milling machine Year 2007 Fpedpfx Asz Nyz Nel Sen Machine number 950-483 Axis Travels and Rotary Table X-axis travel 2,000 mm Y-axis travel 800 mm Z-axis travel 2,000 mm B-axis rotary table 360 degrees

Condition: good (used), Quadro Comil 196S Cone Mill Stainless milling machine designed for efficient size reduction and particle size control, capacity 3600Kg per hour, 11Kw motor, on stainless mobile stand, comes with four different size cone meshs, 3Ph Fpsdpfx Asz It Ifsl Ssn

Condition: like new (used), Year of construction: 2021, operating hours: 1,400 h, CNC turning machine MT RENT T25FSY Year of manufacture: 2021 Control: SIEMENS 828 D Operating hours: 1400 h Technical data: * Year of manufacture: 2021 * Control: Siemens Sinumerik 828D * Operating hours: approx. 1,400 h * Max. swing diameter over bed: 600 mm * Max. turning diameter: 460 mm * Max. turning length: 558 mm * X-axis travel: 310 mm * Z-axis travel: 620 mm * Y-axis travel: 110 mm / ±55 mm * B-axis travel / counter spindle: 650 mm * Spindle bore: 77 mm * Max. bar diameter: 65 mm * Main spindle speed: max. 4,500 rpm * Counter spindle speed: max. 4,500 rpm * Main spindle motor: 23 kW * 12-station BMT-60 tool turret * 12 driven tool stations * Tool shank: 25 × 25 mm * Max. drilling bar diameter: 40 mm * Hydraulic working pressure: 40 bar Equipment: * Y-axis * C-axis * Counter spindle * Driven tools * BMT-60 turret * WTO / QuickFlex tool holder * Bar loader * Chip conveyor * Hydraulic 3-jaw chuck * Coolant system Fedpfjz I R Sbsx Al Sspn * Workpiece/part catcher * Foot pedals * Flat guides

Condition: used, Year of construction: 2014, Vertical high-speed machining center Manufacturer: DMG Mori Type: MILL TAP 700 Year of manufacture: 2014 Control system: Siemens 840D SL Travel ranges X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool magazine: 15 positions Weight approx.: 4,100 kg Automation with robot Manufacturer: Sontec Type: Sonflex Year of manufacture: 2023 Fodpfx Aez I Inmel Sspn Robot: Fanuc 121026

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Fpedpfxeq Nx Als Al Sen Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table length: 3,700 mm, spindle motor power: 28 W, SORALUCE TA-A 35 CNC milling and boring center, equipped with a HEIDENHAIN iTNC 530 HSCI numerical control system, an automatic milling head, and a 40-position tool changer. Technical specifications Manufacturer: SORALUCE Model: TA-A 35 Year: 2013 Numerical control: HEIDENHAIN iTNC 530 HSCI Fpjdpfx Alsz Nhzds Ssn Longitudinal travel X: 3,500 mm Vertical travel Z: 1,250 mm Transverse travel Y: 1,200 mm Table dimensions: 3,700 × 1,000 mm Spindle power: 28 kW Spindle speed: 20 to 4,000 rpm Spindle torque: 479 Nm Spindle taper: ISO 50 / DIN 69871 A Rapid traverse rates: 25,000 mm/min Machine weight: approximately 18,500 kg Equipment and options Automatic milling head with 2.5° × 2.5° indexing Automatic 40-tool changer, with horizontal and vertical tool change HEIDENHAIN control with HR 410 electronic handwheel M&H 20.41-MULTI workpiece measurement system HEIDENHAIN TT 140 tool measurement probe Longitudinal chip conveyor Transverse chip conveyor Protective enclosure with access doors 3D thermal compensation Automatic centralized lubrication Preparation for the integration of a CNC dividing head

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner shredding mills in the C’s series (“C” stands for “compact,” “s” stands for “silent,” i.e., optimized for noise reduction) offer practical solutions for almost all challenges in the in-line recycling of sprues and defective parts in the production process. Thanks to the modular design, the shredding mills in the C’s series can be easily adapted to the specific application or the needs of the operation. Depending on the method of feeding the sprues, the disposal of the ground material, or the injection molding machine used, the C’s series from Wanner offers optimal solutions that can be adapted to your specific operating processes through a variety of standard components. The optimized cutting geometry and the low rotor speed guarantee high-quality ground material with a low dust content. Sound-insulated feed hoppers and the grinding chamber design, which is optimized in terms of structure-borne noise and natural frequency, contribute to a low noise level. The large-sized gearbox ensures a long service life for the shredding mills and also allows for extremely compact dimensions. The grinding chamber can be opened very easily with just a few steps, which saves time and thus costs, for example, during cleaning due to a color or material change. The advantages of the C’s series: easy adaptation to the specific application through a modular system compact design requires only a small footprint next to the injection molding machine robust, cast/steel housing that can be moved on swivel casters durable motor/gearbox unit for a long service life significantly reduced noise level thanks to a bevel-cutting rotor and a vibration-optimized grinding chamber design easy handling and simple cleaning the mill saves time and costs improved feed behavior of bulky sprues and ground parts due to optimal rotor geometry Fpjdpfszc Nydex Al Sen grinding chamber with hardened inserts for minimal wear with glass fiber reinforced materials high-quality and low-dust ground material thanks to the optimized cutting geometry. The rotating disc in the side wall reduces friction and thus heating and damage to the ground material. blades can be easily resharpened without a special device sound-insulated and tamper-proof feed hoppers Technical data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20-25 kg/h Screen aperture: 3-8 mm Voltage: 400 volts/50 Hz Extraction container: volume approx. 6 l Suitable for glass fiber reinforced materials as standard Control: Contactor control with overload protection switch electrically redundant system with self-monitoring safety relay acc. to EN 12012 5 m connection cable Weight: 155 kg Year of manufacture: 04/2019 Product video "We offer everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more articles - new and used - in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, For sale: Mikron WF 41C CNC milling machine Fpjdpfsz Rq A Hox Al Ssn Reliable Swiss universal CNC milling machine with Heidenhain TNC 155 control. The machine is used but still functions very well and is supplied with a number of tools. Specifications: Control: Heidenhain TNC 155 X-axis: 630 mm Y-axis: 500 mm Z-axis: 460 mm Table dimensions: 1,000 × 500 mm Spindle taper: SK 40 Spindle speed: 31.5–3,150 rpm Machine weight: approx. 3,100 kg Price: upon request Interested? Please contact us for more information or to arrange a viewing. M2Trade #Mikron #CNCMillingMachine #MillingMachine #Metalworking #UsedMachines

Condition: used, Year of construction: 1983, functionality: limited functionality, feed length X-axis: 1,700 mm, feed length Y-axis: 650 mm, feed length Z-axis: 700 mm, table width: 570 mm, table length: 2,000 mm, Oerlikon FM 3 CNC milling machine Heidenhain TNC 320 Fpodpeyp Dxusfx Al Sjn was used until recently for milling weld preparation edges Tool holder: SK 50 Loading possible with an overhead crane

Condition: used, machine/vehicle number: 37247, equipped with a 3-axis digital display, manufactured by HEIDENHAIN, with a coolant system, machine light, and angled milling head with counter holder. Fpodpfx Alez Nhn Ro Ssn

Condition: good (used), Year of construction: 1998, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. Fsdpfx Alszcqcgo Sjpn The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and generous work area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Work area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Work table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150 liter capacity Machine weight: approx. 4,300 kg (incl. safety cabin) Product video “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2023, Hammer Mill with electrical box and cyclone filter for sale. The machines has a CE certificate. Technical parameters: Electric motor power: 45Kw Capacity: 1500-2000kg/hour Machine size: 1750mmx900mmx1550mm. Weight 1300kg. Fsdexf Nw Hjpfx Al Sjpn Located Locally in Hungary (EU)

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231674, A high-quality, 3-axis precision machining center, the MIKRON MILL P 900 from GF Machining Solutions, built in 2017, is for sale. TECHNICAL DATA Fpedpfez Ipnnsx Al Ssn General Data Manufacturer: MIKRON / GF Machining Solutions Model: MILL P 900 Machine type: Vertical 3-axis precision machining center Year of manufacture: 2017 Number of axes: 3 Spindle operating hours: approx. 1,530 hours CNC control: FANUC 31i-B TECHNICAL DATA Travel X: 900 mm Travel Y: 600 mm Travel Z: 450 mm Rapid traverse X/Y/Z: 30 m/min Clamping area: approx. 1,000 × 600 mm Max. table load: 1,000 kg Max. spindle speed: 20,000 rpm Tool holder: HSK-A63 Spindle power: up to approx. 36 kW Torque: up to approx. 120 Nm Tool changer: 30-position Tool holder: HSK-A63 Machine concept: 3-axis gantry machining center The machine can be inspected on site by appointment. Subject to change, errors and prior sale!

Condition: used, Pulley Diameter 700mm Max sawblade width 35mm Table size 980mm x 700mm Max blade length 5120mm Fpjdpezd Uuhjfx Al Sen Table Tilting 0 to 35 degrees Throat capacity 600mm Max. Cutting height 350mm Adjustable rip fence 4 Hp motor and starter Weight 435kg