Used Bar Feeder for sale (16,955)

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester Kwjdpfxoyccvfe Ahzst -Pressure range: 2x 0 to 10 bar -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg Kedpfeycck Asx Ahzswt

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg Kodsitdikepfx Ahzewt

Condition: good (used), Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 150 L -Operating pressure: 11 bar Ksdpfxeya Dfij Ahzjwt -Dimensions: 1460/510/H530 mm -Weight: 92 kg

Condition: used, tank capacity: 2,410 l, GENERAL INFORMATION Design: suspended Speed: 211 rpm Internal diameter: 1,500 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be checked) Total height: 3,160 mm Heating/cooling: available Insulation: available Power: 3.6 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 10.0 bar Kwsdpfxsycirmj Ahzst Max. overpressure: 0.49 bar Agitator: blade-type agitator Location: external storage Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,410 liters Jacket volume: 132.0 liters Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,260 mm Last application: chemical VESSEL Max. permissible operating temperature: 200 °C Bottoms: dished ends (Klöpperboden) Support type: lug supports HEATING/COOLING JACKET Temperature control underside: half-pipe coil INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head Outlet: available Outlet: 80 mm AGITATOR Agitator manufacturer: Ekato Voltage: 380 Volt Baffles: Agitator arrangement: centrally mounted on the top head

Condition: good (used), Item: D-1035-Double bulk feeder with weight Stainless Steel double bulk feeder with weight. Kedjd Nk Ucopfx Ahzswt Dimension: Vat L 1800 X W 850 X H 1300 mm Bigger lift: 460 mm, Small lift 100 mm, flight 80 mm L 2700 + weight 500 mm , Total L 3200 mm

Condition: used, functionality: fully functional, With this offer, you are purchasing a used A3 colour printing system ‘Ricoh IM C4510A’. Item for sale: 1 x Ricoh IM C4510A with the following equipment: Includes output finisher Kjdpfx Aeyam D Ijhzjwt Includes 2-compartment cassette cabinet Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 29,251 pages Colour: Approx. 19,903 pages Black: Approx. 9,348 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: good (used), Burner nozzles, cutting nozzles, flame cutting system, burner, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm Acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bar -Diameter: 19 mm -Length: 47 mm -Quantity: 22 pieces available -Price/Sale: complete -Total weight: 1.1 kg Ksdpeh Uhkwjfx Ahzswt

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: Kwodpfex Tdpiox Ahzot - Horizontal signature feeders: 1 - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 Kwodpfsx Tdn Sex Ahzot - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Ksdsx Tdn Eopfx Ahzswt Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain Kodpfox Tdnxjx Ahzjwt - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAS 400 Year: 2004 Description: - Vertical signature feeders: 1 Kjdox Tdnfjpfx Ahzswt - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain Kjdpfx Ahsx Tdmuszewt - Excluding pump(s)

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Ksdpfeyawrcox Ahzswt

Year of construction: 1998, condition: good (used), Part of an old direct extrusion line for pipes (which is also still available). This machine is supplied with the following components: Kwodex S Rimspfx Ahzjt - 4-component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control system for dosing and extruder - Single-circuit oil tempering - Maag melt pump

Condition: used, Year of construction: 1974, round bar steel 63 mm square edge steel 55 mm Kwjdpehxzmcjfx Ahzot flat steel 100 x 25 mm engine 380 V, 6,3 kW weight ca. 2.450 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Test beams Test beams Make Mauser defective, see picture length 350 mm width 190 mm Height. 60 mm Kodpfx Asg N Achjhzjwt in wooden case

Condition: excellent (used), Wedge bar chuck (28319) diameter 290 mm Ksdpfxoiuvume Ahzewt Cylindrical 78 mm thread increase 6 mm Weight 54 kg

Condition: like new (used), Year of construction: 2012, operating hours: 191 h, functionality: fully functional, compressed air connection: 20 bar, pressure: 20 bar, Cold Jet Aero 40 HP This machine is suitable for industrial cleaning, from routine tasks to very large projects. The advantage of this unit is its lack of next-generation electronics, making it straightforward and robust. It is considered one of the most aggressive and effective machines on the market. The machine is in excellent condition. Cold Jet Aero 40 HP Dry Ice Blasting Machine – Complete with the Following Equipment: - COLD JET AERO 40 HP DRY ICE BLASTER (191 HOURS RUN) Kwjdpowyk Uxofx Ahzst - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Price: €19,500 This is one of the best machines available worldwide. It contains no electronic control systems, which makes it extremely reliable and reduces maintenance costs. For inquiries or to arrange a viewing, please contact DrDryice. All machines are sold with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines and also supply new Cold Jet models. Contact us for more information. Worldwide shipping available. Relevant keywords: Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine | dry ice blaster | dry ice cleaning Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Cold Jet dry ice blasting machines various models Maintenance and repair of Cold Jet dry ice machines

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Ksdohlnzkopfx Ahzowt Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 122, Cover folder feeder, Minimum case size: 140 x 308 mm, Maximum case size: 485 x 1002 mm, Maximum mechanical speed: 1,000 - 6,000 cycles/h, Minimum case weight: 200 g/m², Maximum case weight: 400 g/m² Kwjdpfxox Apfre Ahzot

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit Kwsdpfx Ahjv Auxuezet -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Condition: used, Year of construction: 2002, functionality: fully functional, Used Kora Packmat friction feeder. Originally supplied by Nodema to the only customer who used this feeder. Taken back in working condition and ready for use again. Kwjdpfxjx Tuiaj Ahzet

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) Kjdpfsx Hggwex Ahzswt An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *