Used Bark Shredder for sale (1,180)

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) Hpedpfx Aov Sqrpjdwja MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 10 kg, color: blue, operation weight: 10 kg, maximum load weight: 10 kg, empty load weight: 10 kg, Hello, I am offering for sale a shredding line, entirely manufactured by OSKA. The line was produced in 2010 and was refurbished by the manufacturer in 2021. The line consists of: Hodpfxjx H Ii Hj Adwepa - Infeed table - 32 m long vibratory trough - OKRR 550 chipper - 20 m redler conveyor with three lockable discharge chutes - New chain for the redler - Complete control system - Full documentation - Four sets of knives Price: 289,000 PLN

Condition: new, Year of construction: 2025, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Hjdpfxotql S Ts Adwspa Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight 14,500 kg Standard configuration Engine: Volvo-Penta, Stage V / 129 kW Hook lift Track drive Overband magnet with discharge hopper Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Hodpfextgkmex Adwopa Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm Hedpfxjl I Dx Ns Adwjpa new base frame with steel construction new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Condition: good (used), Year of construction: 1998, Shredder with 1 m rotor width, ideal for pallets. Rotor diameter 300 mm with 24 knives. 22 kW motor. Equipped with discharge auger. Extraction connection 250 mm. Screen perforation 25 mm. Hpodpfx Adexzpzdjwsa

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Hsdpfodwktksx Adwspa Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: ready for operation (used), Grinder, Shredder, Moditec G3 ACPS, Used machine Manufacturer : Moditec Type : G3 ACPS Overall dimensions : 1480 x 485 x 1570 mm Weight : 340 kg Year : 2002 Electrical data : 400 V ; 2.2 kW Feeding hopper : 500 x 350 mm Hedpfsx Da Exox Adwepa

Condition: new, Year of construction: 2025, Arjes / Eggersmann Impaktor 250 EVO 2 - incl. 1 set of shafts NEW - Arjes Impaktor 250 EVO 2 with one set of shafts Hsdpfxjwnpwzo Adwspa Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight: 14,500 kg Standard engine configuration: Volvo-Penta, Stage V / 129 kW Hook lift Track chassis Overband magnet with discharge container Water spraying for less dust spreading Remote control 1 set of shafts of choice, Shafts installed and incl. quick-change cassette and breaker bars Star shafts (tires, trash, plastic) Concrete shafts (demolition waste, asphalt) Paddle shafts (green waste, wood) Optional on request: - Crushing baskets for concrete and wood - Winding fans - Finger screen, disc screen - and more…

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 900 h, functionality: fully functional, HAAS Tyron 2000 XL 2.0 Year of manufacture: 2023 Approx. 900 operating hours - Crawler undercarriage - Scania diesel engine 294kW / 400HP – emission stage V Hpodpsm H T R Eefx Adwoa - Fine tool configuration 9/9/4 - Neodymium overband magnet, hydraulically height-adjustable - Generous tilting hopper - AWG approval under §52 The machine is suitable for waste wood, green waste, roots, and various types of waste...

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg Hodpfew Tbw Asx Adwspa ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor 20 knives on rotor 25 mm concave Hpedpfx Adsp H Sv Dswja There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Hpjdpfx Adsgmfa Aowsa Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: good (used), Year of construction: 1996, overall weight: 9,960 kg, JENZ AZ 35 D/Electrical Issue/Shredder/Chipper Hpjdpfx Aexb Dkyedwsa • Manufacturer: Jenz • Model: AZ 35 D • Year of manufacture: 1996 • Total weight: 9960 kg • Engine: Mercedes-Benz 6-cylinder • Electrical issue • Rotor and beaters in good condition • Discharge conveyor as new • Power: kW/HP • Documentation • German machine • Immediately operational • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical mistakes reserved. - Sale according to our terms and conditions.

Condition: ready for operation (used), functionality: fully functional, Schutte-Buffalo 1590 – hammer mill, 132 kW motor For sale: Schutte-Buffalo hammer mill, model 1590. Complete machine with start-up system and extraction ventilation. Designed for wood shredding (other materials negotiable), robust industrial construction. Configuration / Equipment Installed motor: 132 kW, 1500 rpm Control cabinet: star–delta start-up Extraction fan (included): 30 kW Option to install 150 kW motor – engine available optionally for buyer Additional knives/hammers as replacements – included Technical data Weight: 3580 kg Rotor width: 910 mm Shaft diameter: 30 mm Hpjdpsx Hgxasfx Adwsa Knives/hammers: 90 mm Output: approx. 9 m³/h of dry timber (approx. 10% moisture), softwood

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5020, power: 45 kW (61.18 HP), Stationary wood chipper with 45 kW electric motor. The Hackkontrol HC 960 control system was replaced two years ago. This control regulates feed-in when the speed drops and can be adjusted as needed. The wiring in the connection box was also overhauled two years ago, so the chipper can be connected using a cable with a minimum of 100 Ah, preferably 125 Ah, and can be put into operation directly. The chipper is robustly constructed and fully operational. Machine documentation is available and spare parts are still readily obtainable. Hpodpfx Ajxy Rrzedwsa

Condition: good (used), -1Pc. Metso M&J 4000-8 Shredder . With Hydraulic power-unit and control-panel in container. Hpsdpfx Aoxhlfrodwja With conveyor for output material and inlet hopper.

Condition: good (used), Year of construction: 2006, Chipper with rotor width 800 mm Rotor diameter 368 mm with 40 knives Motor 22 kW Only 850 operating hours Hpedoxyud Iepfx Adwea

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net Hsdpsd E R D Ssfx Adwepa - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, We would like to present you with an offer for Protechnika shafts dedicated to MRW 2.85 and MRW 2.10.10 machines: MRW 2.10.10: - 6-10-10 - 8-10-10 - 10-10-10 - Steel shafts Hodpfex Hx Hpox Adwopa - Side combs - Breaking bar MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 - Side combs - Breaking bars PROTECHNIKA is a company with 21 years of experience, actively engaged in the manufacture of spare parts and complete recycling lines from the very beginning of its operations. In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. Through the implementation of automatic welding processes and our own proprietary production technology, we have been able to minimise production times while maintaining consistent, high quality. Grinding shafts are produced in series, which, among other benefits, enables us to partner with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 certified welding personnel - ISO 9001:2015 - ISO 14001 - Independent design department able to meet any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are our top priority, because their satisfaction is our success!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WAG 200 LK04, overall weight: 4,000 kg, fuel type: electric, color: red, REINBOLD 1400 – German Shaft (Rotor) Shredder For sale: Reinbold 1400 shaft shredder (German manufacture). Machine for shredding wood and wood waste, robust construction, weight approx. 4 t. Technical specifications Main motor: 30 kW Hydraulic pump: 4 kW Working width of rotor: 136 cm Hpedpfx Adox Hgirswea Rotor diameter: 25 cm Loading hopper – top dimensions (L x W): 257 x 190 cm Loading hopper – bottom dimensions (L x W): 100 x 136 cm Chip discharge: Ø 250 mm Equipment Screens included: Ø 12 mm and Ø 16 mm

Condition: new, Year of construction: 2025, production time appr. 4 months Hpsdpfx Adjd Hkqhewea * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, We would like to offer you shafts designed for machines such as PRO.S1, MRW 2.65, MRW 2.75. - Paddle shafts - Concrete shafts - Star shafts - Trapezoidal shafts - Cassette shafts PROTECHNIKA is a company with 21 years of history that has specialized in the production of spare parts and complete recycling lines since its inception. In recent years, we have expanded our portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technology, we have minimized production times while ensuring consistent, high quality. Grinding shafts are a serial product, which, among other benefits, allows us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 - Automated welding processes / ISO 15613 / ISO 15614 - ISO 9606-1 qualified welders - ISO 9001:2015 - ISO 14001 - An independent design department capable of meeting any customer requirement - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of utmost importance to us, because their satisfaction is our success! Hpjdpfsx Hx Erex Adwoa

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start Hpodpfx Adodv Eu Hjwea - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% Hpsdod Dgw Uepfx Adwsa - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear