Used Basika Grease Separator for sale (7,106)

Condition: good (used), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Todpfstu Igcsx Anlsb Shelf length: 1,056 mm Number of bays per shelf row: 01 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled 2,278 mm high 300 mm deep 08x shelf, used Material color: sendzimir galvanized Dimensions: 994 x 300 x 30 mm Weight per unit: approx. 3.18 kg Max. load per shelf 125 kg with evenly distributed load 21x shelf dividers, used Material color: sendzimir galvanized Clear shelf height: 288 mm 02x Side panel, second-hand Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 175 mm 01x Cross brace, second-hand Designation: KV31013 Material color: sendzimir galvanized Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Todpfx Anjua Tbwjlsb Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: good (used), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 1,056 mm Number of bays per shelf row: 01 pcs. Tsdpfettg Erex Anlob The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled Height: 2,280 mm Depth: 300 mm 05x wooden shelf, used Chipboard width: approx. 985 mm Chipboard depth: 217 mm Material thickness: 22 mm 10x Shelf traverse, second choice (new) Type: KTRZ 31036 Material color: sendzimir galvanized Z-profile: 60 x 40 x 12 mm Clear width: approx. 994 mm Hole pattern: approx. 53 mm Agraffe: 3 HK (hooks) Weight per unit: 1,700 kg Max. load per pair of crossbars 300 kg with evenly distributed load 10x unit beams, used Material color: sendzimir galvanized Dimensions: approx. 40 x 35 mm (WxH) Material thickness: approx. 1.50 mm Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: 1,056 mm Number of bays per shelf row: 01 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled 2,278 mm high 400 mm deep 08x Shelf, used Designation: ZB 4423 V Material color: sendzimir galvanized Dimensions: 994 x 400 x 30 mm Weight per unit: approx. 4.65 kg Max. load per shelf 200 kg with evenly distributed load 21x Freestanding shelf dividers, second-hand Designation: TRF 44 27 Material color: sendzimir galvanized Clear shelf height: 291 mm 02x Side panel, second-hand Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 275 mm 01x Cross brace, second-hand Designation: KV31013 Material color: sendzimir galvanized Tedpfx Aottl Eusnlsb Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical Data for Pallet Racking System: Racking System: Mecalux Technical Data for Configuration: Tjdsvzam Iepfx Anlob Number of Racking Rows: 1 unit Length per Row: 9,845 mm Number of Bays per Row: 5 units Number of Levels plus Ground Level: 2 units Capacity Data: Pallet Spaces per Bay: 6 units Pallet Spaces per Row: 30 units Total Pallet Spaces: 30 units Scope of Delivery: 06x Pallet Rack Frames, used Material finish: Sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. horizontal and diagonal bracing, baseplates The frames are pre-assembled (bolted lattice construction) 2,000 mm high 1,100 mm deep 20x Pallet Rack Beams, new Material finish: RAL 2001 orange Beam type: TB-S 100 Box section: 100 x 50 mm Clear span: 1,825 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 40x Integrated Safety Pin, new To secure beams against unintentional uplift 24x Wedge Anchor, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 12x Shim Plate, used Material: fully galvanized For leveling frames installed on uneven floors 01x Load Capacity Sign With specifications for bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your Contacts in Our Company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only offered for collection. If transport or shipment of the item is required, additional charges will apply, which can be quoted separately depending on delivery location and scope.

Condition: good (used), Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x shelf stands, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm including bulkheads and base plates The stands are pre-assembled 2,278 mm high 400 mm deep 09x shelves, used Designation: ZB 4423 V Material color: sendzimir galvanized Tjdov Avuqspfx Anljb Dimensions: 994 x 400 x 30 mm Weight | piece: approx. 4.65 kg Max. load per shelf 200 kg with uniform distributed load 27x reusable containers, used Manufacturer BITO Type: MBD 43171 Color: pigeon blue Material: polypropylene External dimensions: 410x300x190 mm (LxWxH) Volume: 16 liters Contents load: 14 kg Weight | Piece: approx. 1.30 kg Incl. 2-part hinged lid 01x cross brace, used Designation: KV31013 Material color: sendzimir galvanized Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical specifications for the pallet rack upright: Shelving system: SSI Schäfer Type: K Included in delivery: Todjv I Tcpspfx Anljb 1x pallet rack upright, used Material color: Sendzimir galvanized Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled (screwed framework) Frame height: 2,000 mm Frame depth: 1,100 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Technical data for the compensation plate: Manufacturer: Bito, Type PRO Suitable for the L base plate; which is mounted on the rack uprights P1-P3. Scope of delivery includes: 01x Compensation plate, used Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | each Your contacts in our company: Mr. Andre Evering Todpfx Aex Tua Ssnleb Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If further transport or shipping of this item is required, this will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data for the shelving unit: Shelving system: META Type: CLIP Technical data for setup: Number of shelving rows: 01 pcs. Shelf length: 2,150 mm Number of bays per row: 01 pcs. Number of shelves: 06 pcs. per bay Included in delivery: 03x Uprights, used Color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment pitch: 25|25 mm incl. base plates and bracing strut Uprights pre-assembled Height: 2,490 mm Depth: 635 mm 12x Shelves, used Model: V100 Color: cream white Dimensions: 1,000 x 600 x 40 mm Weight: 4.04 kg each Max. load per shelf: 100 kg with evenly distributed load 06x Shim plates, used Dimensions: 76 x 58 x 2 mm Weight each: 0.064 kg Finish: sendzimir galvanized 48x Shelf supports, used Weight each: approx. 0.014 kg Finish: sendzimir galvanized 04x Cross bracing, used Finish: sendzimir galvanized 01x Load sign indicates bay and shelf load limits, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Todpfjxfkqzjx Anleb General information about the item: This item is offered for collection only. If transport or shipping of this item is required, it will incur additional costs, which can be requested from us separately, depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2025, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, 🚀 EMO Show Highlight: VM2000 Gantry Milling Machine 🚀 – Precision. Performance. Immediately Available. Our CNC gantry milling machine VM2000 will be demonstrated live at the upcoming EMO trade fair – giving you the unique opportunity to secure this model directly from the show at a special price! 🔧 Technical Highlights: ✅ Travel range: X 2000 mm / Y 1300 mm / Z 800 mm ✅ Spindle: HSK A63, 15,000 rpm, 38 kW peak power ✅ Table size: 1650 × 1300 mm, load capacity up to 4000 kg ✅ Precision: Positioning accuracy P0.012 mm ✅ 24-position tool changer for maximum flexibility 💡 Perfect for tool & mold making, automotive, and aerospace industries. Further specifications attached and below: Category Value Control FANUC 0i MF Plus X-axis travel 2000 mm Y-axis travel 1300 mm Z-axis travel 800 mm Spindle nose to table 235–1035 mm Column distance / max. workpiece height 1820 / 1000 mm Table size (L×W) 1650 × 1300 mm Max. table load 4000 kg T-slots (width × pitch × qty.) 22 × 180 × 7 mm Spindle taper HSK A63 Max. spindle speed 15000 rpm Spindle power (cont./max.) 15 / 38 kW Max. spindle torque (cont./max.) 70 / 149 Nm Rapid traverse X/Y/Z 20000 / 20000 / 12000 mm/min Feed rate X/Y/Z 1–10000 mm/min Motor power X/Y/Z 4 / 9 / 9 kW Tool changer type Arm Tool positions 24 Max. tool diameter φ75 / φ130 mm Max. tool length 300 mm Max. tool weight 8 kg Positioning accuracy P0.012 mm Repeatability Ps0.010 mm Tjdsw N I A Depfx Anlob Air pressure 0.6–0.8 MPa Coolant flow 99 L/min Power supply 3/PE, AC380V, 50Hz Power consumption 60 kVA Machine dimensions (L×W×H) 5000 × 4910 × 4600 mm Machine weight 21000 kg Main Features 1 FANUC 0i-MF plus absolute, type 0 system, 15-inch color LCD 2 iHMI + manual I 3 Max.1500, min.400 block look-ahead 4 Data server (2GB) 5 Fast Ethernet card 6 Straightness compensation interpolation 7 Custom operator panel 8 Rigid tapping 9 Transformer 10 Work area lighting 11 3-color signal beacon 12 Portable MPG 13 Automatic power-off 14 Safety door interlock 15 Foot switch and tool release button 16 Coolant tank level monitoring 17 Direct-drive spindle HSK A63, 15000 rpm 18 Spindle oil chiller 19 Air blow for machining 20 Coolant system 21 Spindle air seal 22 Air gun / water gun 23 Grease lubrication system 24 Pneumatic system 25 Full enclosure 26 Electrical cabinet air conditioner 27 Swiveling control cabinet 28 Separated cabinet for high & low voltage 29 Hinged chip conveyor 30 Adjustable leveling pads & foundation blocks 31 Tool kit 32 Operating manuals 33 Spiral chip conveyor 34 Operation manual 35 Spiral chip conveyor 36 CTS, 20-70 bar, including through-spindle air 37 Oil separator (Chinese brand) 38 Arm-type ATC, 24 tools 39 FAGOR absolute linear scales on X, Y, and Z axes 40 Encapsulated iron package 👉 Get more info & secure the special price: New CNC Gantry Milling Machine Skymaster VM2000 – Kraft Werkzeugmaschinen

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction Todsw Sgnkjpfx Anlob - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Tsdpfex D Hntox Anleb Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. Tedpjvmxvfofx Anleb The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: used, Year of construction: 2017, Overview  This brewhouse was manufactured in 2017 by a Finnish company. It is a manually operated 3-vessel system with 1,000-liter capacity, consisting of hot water tank, boiling vessel, and mashing vessel. The equipment is stored in a separate warehouse and available immediately. A viewing can be arranged upon request. Technical data  - Capacity: 1,000 liters per batch - Number of vessels: 3 Tsdpswfqyxsfx Anlob - Automation level: Manual operation Scope of Delivery  - Hot water tank - Boiling vessel - Mashing vessel - Accessories for connection

Year of construction: 2023, operating hours: 514 h, condition: used, functionality: fully functional, overall weight: 7,900 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0602, SORT FLUID is a dry sink-float sorting system with an integrated dosing bunker. This replaces conventional wet sink-float sorting and eliminates the need for liquids entirely. Through an innovative combination of airflow, a special bed material, and gravity, the metals are sorted according to their average particle density. This enables separation of light and heavy metals with a high purity of up to > 99%. This module is part of our rental fleet. Tedextb A Dspfx Anlsb

Condition: excellent (used), KronenDouble pass flume system Tedpfx Anjx Tf Nqoljb 1 x All s/s Kronen flume washer model GEWA 3800V with vibration outfeed. Overall length approx. 3.4 m 1 x Kronen flume washer type IA-T 2600/3800. Water wheel type system with vibration table. Overall dimensions approx. 4.2 m long. Can sell separately or as a system.

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. Tjdpfxey Rk Igs Anlob The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector (EBI) was manufactured in 2009 by Germany Krones. The machine is designed for the inspection of empty glass and PET bottles prior to filling in beverage production lines. It was previously used in production and has been professionally dismantled and stored in a warehouse. The machine is available immediately from warehouse. Technical data Todpfxeythznj Anleb - Capacity: Not provided - Formats: - 0.75 L Gourmet bottle - 0.25 L Gourmet bottle - 0.25 L Vichy bottle - Application: Inspection of empty bottles prior to filling - Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) - Inspection systems: - Base inspection (camera) - Sealing surface inspection - Thread inspection (conical optics) - Mouth / finish inspection - Sidewall inspection with LED illumination - Detection of transparent films on bottle base and sidewall - Scuffing detection via sidewall camera - Residual liquid detection via infrared system and high-frequency detection - Reject systems: - Foreign container rejection at infeed - Contaminated bottle rejection at discharge - Separate rejection for bottles with damaged finish or thread - Utilities: Pneumatic system (Festo / Bosch components), electronic cabinet cooling unit - Transport height: approx. 1,050 mm - Direction of operation: Left machine

Condition: new, maximum load weight: 96,500 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, loading space length: 26,900 mm, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm * For semi-trailer with multiple axles (SZMs): 6 x 4 or 8 x 4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for suspending the supply lines, the SZM tank must have a minimum capacity of 80 l Todpfezahp Sox Anlsb * With MAX Trailer coupling parts, otherwise coupling parts must be supplied by the customer * Gantry with winch for spare wheel on the front of the gooseneck * 3.5-inch kingpin * Steel front panel approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * Control levers on the gooseneck protected by a folding cover * Lighting for the controls on the gooseneck with on/off switch * A 7-pin socket on the left and right at the rear of the gooseneck for the warning sign * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * Hydraulic connections from the gooseneck to the low-bed with screw couplings * Access to the gooseneck * Four warning signs that can be extended by approx. 1,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting bracket for a rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 hp) at 3000 rpm * Hydraulic connection lines between the power pack and the connector plate on the gooseneck * 1 LED work light on the left and right at the rear of the gooseneck with separate on/off switch * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of the trailing axle steering, in addition to the cable remote control, with 2 LED indicator lights on the receiver as a single-axle control. - Operation of raising/lowering the gooseneck - Operation of raising/lowering the suspension of the chassis 2-axle front bogie: * Bolt-on coupling at the front and rear. Length: approx. 2,970 mm. Chassis width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2. (not connected to the track rods) * A 7-pin socket on the left and right at the rear of the front bogie for the warning signs * Surface of the chassis with a sand-blasted coating for slip resistance * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * A 7-pin socket for the warning signs, on the left and right on the front chassis, in the area of the axles * Extendable widening elements by approx. 230 mm on each side for a 2-axle chassis * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for the warning signs for insertion into the pocket recesses in the outer frame of the loading platform Loading platform: * 6-axle double-extendable loading platform with bolt-on coupling at the front and a slope of approx. 500 mm x 8° at the rear * Loading platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Basic width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Surface of the loading platform with a sand-blasted coati

Condition: used, This listing is for Axichrom 140/300 Chromatography Column The unit is in full working condition and ready for immediate use This premium low-pressure axial compression column features a 140 mm inner diameter and 300 mm max bed height, ideal for pilot-scale biopharmaceutical development. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Tsdpfx Aezi Allenleb Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Tedpfx Anjzf Eh Uelob Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: excellent (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 863/2020, total height: 2,100 mm, inner dimension length: 530 mm, inner dimension width: 320 mm, inner dimension height: 200 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, electrical fuse: 50 A, input current: 40 A, temperature: 70 °C, heating capacity: 6 kW (8.16 HP), load capacity: 40 kg, Equipment: documentation/manual, Höckh Multiclean Lean Concept III, including filling with new Safechem Dualene 1601 solvent. Everything is complete and ready for use and is sold as a complete package. The system offers options for immersion spraying, steam degreasing, and ultrasonic cleaning. Remote maintenance is prepared and only requires an internet connection. In addition to the system, the scope of delivery includes: - automatic basket feed - 3 cleaning baskets - chiller for system cooling - complete documentation The system can be inspected and tested before purchase. Tjdpfoy Sxn Dex Anlsb After the purchase, we will gladly assist with dismantling and loading, and can also provide a brief training session on machine operation and maintenance. The system is fully functional and in very good condition. We are selling this system because we now have a larger system in operation.

Condition: used, Year of construction: 2005, Overview This SIDEL FILLING S.r.l. E-JET 40 is a rotary rinser for glass bottles, equipped with 40 rinsing valves (pitch 113 mm). It currently operates within a complete cider filling line and handles glass formats from 25 cl to 1.5 L. A separate water filtration system with manifold piping, pressure gauges and manual valves is included. The machine is enclosed in stainless steel framing with transparent safety guards and features rotary bottle handling with starwheel transfer. It is still installed and under power, remains in production until end of October 2026, and can be visited in operation on request. Technical data - Manufacturer: SIDEL FILLING S.r.l. (Parma, Italy) - Model: E-JET 40 - Year of manufacture: 2005 Tsdpfx Aozidx Honlsb - Machine type: rotary bottle rinser, glass - Rinsing valves: 40 (pitch 113 mm) - Products: cider, carbonated beverages - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 18,000 bph (0.33 L), approx. 14,000 bph (0.75 - 1.0 L) - Dimensions: approx. 290 x 240 x H 230 cm - Weight: approx. 3,400 kg - Power: 6.5 kW installed (400 V, 50 Hz) - Air: 6 bar operating, approx. 100 Nl/min - Water: 3 bar, approx. 2,500 l/h Equipment - Water filtration system with manifold piping, gauges and manual valves - Spare parts package - OEM technical documentation and machine layout drawing Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Availability From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: E22SI18052669752, This is a combination oven/steamer SCC WE 202, in an electric version, from the premium manufacturer Rational, manufactured in 2018. The unit has been operated for 7,679 hours. The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection & expert cleaning. Checked & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3 standard. This combination oven/steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the unit automatically recognizes the ideal cooking path, the size of the food, the quantity loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 1084 x 996 x 1782 mm Minimum door opening dimensions for transport W x H: 1145 x 1900 mm Power connection: V: 400 / kW: 65.5 / Hz: 50/60 Weight: approx. 351 kg Serial number: E22SI18052669752 Year of manufacture: 05/2018 Condition: Used, inspected and fully functional. Additional information: In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130 °C), hot air (30°C to 300°C), and combination (30°C to 300°C) Core temperature probe Integrated energy optimization Care Control - self-cleaning Tedezkhz Iepfx Anleb Handheld spray nozzle with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - even overnight Moistening adjustable in 3 levels - from 30°C to 260 °C 5 programmable proofing levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to change and errors.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: E22SI16112554448, This is a combination oven/steamer SCC WE 202, in an electric version, from the premium manufacturer Rational, manufactured in 2016. The combination oven/steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. The combination oven/steamer has only been used for 7,673 operating hours. You will receive an invoice with VAT shown. Service: We will be happy to assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs • High-quality branded equipment at fair prices • Professional overhaul / inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or self-collection options • Competent advice - before and after purchase • Provision of operating instructions, connection diagrams & spare parts • Inspection according to DGUV V3 seal This combination oven/steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the appliance automatically recognizes the ideal cooking path, the size of the food, the amount being cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: • W x D x H: approx. 1084 x 996 x 1782 mm • Minimum door opening dimensions for transport W x H: 1145x1900mm • Power connection: V: 400 / kW: 65.5 / Hz: 50/60 • Weight: approx. 351 kg • Serial number: E22SI16112554448 • Year of manufacture: 11/2016 Condition: Used, inspected and fully functional. Additional information: • In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) • Core temperature sensor • Integrated energy optimization • Care Control - Self-cleaning • Handheld spray gun with automatic retraction • 8.5-inch color display and touchscreen • 5 fan speeds programmable • Integrated, maintenance-free grease separation system • Automatic start time setting • 7 cleaning levels for unattended cleaning - also overnight • Humidification adjustable in 3 levels - from 30°C to 260°C • 5 programmable fermentation levels • USB interface • Seamless, tub-shaped hygienic cooking chamber, rounded corners • Halogen cooking chamber lighting Todpezkh Ihjfx Anlob Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to receive advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).