Used Batch Reactor for sale (1,199)

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control year-round + Rapid gelatinization during mixing without ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible via water mixing and metering unit + All water-contact parts are stainless steel and require no cleaning + Hygienically perfect potable water Cjdpsivdvcofx Afloaa Langheinz ice water units stand out for: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controller + Stainless steel evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water reservoir + Drain tap in the ice water reservoir + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - Stainless steel wall console (for model L60 + L100): + €319 net - Machine table (for model L100): + €389 net - 3-way changeover valves --- For water mixing and metering units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters/hour - Peak cooling output*: 180 liters/hour - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1.189 kW - Power supply: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters/min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption for 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: Pro Coil E-18/9, Thermaflex ThermaSmart PRO Coil E-18/9, thermal pipe insulation in box. Lot of 65 boxes. Diameter: 18mm Thickness: 9mm Caodpfx Afow Hzu Asloa Length: 23m

Condition: used, Mains choke, mains filter, frequency converter, frequency converter, drive converter, line filter. Reactor , reactor, suppression choke -Manufacturer: Fanuc, mains choke Reactor -Type: A81L-0001-0156 -Dimensions: 130/105/H140 mm -Weight: 5.6 kg Caedpekia Txjfx Aflsa

Condition: good (used), Batch dryer dryer Aeromatic Strea 30 fluidized bed dryer batch dryer Stainless steel version Csdpewyf H Nofx Afloaa Complete with control cabinet and accessories (operation unknown) Total height +/- 3 meter Equipped with nozzle device Suitable for drying and coating Fan power 5,5kW 62000 kcal/h See our other advertisement VMA Wekerom

Condition: used, total width: 1,000 mm, total height: 800 mm, total length: 600 mm, Party offer steel stacking bin with lid (10 pieces) Price per party € 690,- Excl. VAT (€ 834.9 Incl. VAT) Cajdpfx Afevn I Tielea Outside dimensions: 1000x800x600mm Price is ex Vaassen Available from stock (subject to interim sale) Delivery possible at additional cost

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head Cedpfxjd Sg Hrj Aflsaa 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: good (used), Used electrically heated pressure vessel with agitator Item number: 10256 Last use: Chemistry Volume: 280L Type: Upright on feet Material (wetted parts): 1.4301 stainless steel Bottom: dished bottom Top: dished bottom with flange ring Operating pressure according to type plate: +3Bar Operating temperature: Max. 90°C Tank dimensions: Inner diameter: 560mm Outer diameter: 580mm Height of the feet: 260mm Distance from drain to floor: 365mm Total height: 1540mm Cajdpfxsd Dwi Hj Aflja Materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Double jacket around cylinder and bottom electrically heated Agitator in upper base, speed adjustable Top floor completely removable Various connections Sight glass in cylinder

Condition: used, ? Polygonmach PVB150 Mobile Concrete Plant | Cold asphalt plant, RCC mixing plant, soil compound mixing plant. Emulsion mixing plant ? Polygonmach PVB150 is a next-generation mobile concrete plant designed to meet the demands of modern construction projects for speed, flexibility, and cost-efficiency. It offers dual-mode production – both Volumetric and Batch type operation – on a single platform, delivering perfect compatibility for all project types. ✅ Dual-Mode Flexibility: • Volumetric Mode: On-demand, instant production up to 200 m³/hour directly at the site • Batch Type Mode: Precision recipe-based production up to 100 m³/hour ✅ Key Features: • Fully Automatic or Manual Operation: User-friendly control panel allows seamless control • Precision Weighing System: Ensures accurate dosing, minimizes material waste • Multiple Mix Recipes: Easily switch between different mix designs • Separate Storage Bins: 3x8 m³ aggregate hoppers, 5-ton cement silo, water & additive tanks • Filling Conveyor: Fast and efficient loading • Quick Setup: Ready to operate in just 10 minutes Cjdpfx Ajx Admdefljaa • Fully Mobile: Maximum ease in site-to-site transportation • Low Logistics & Transport Costs: On-site production eliminates ready-mix losses • Sustainable Production: Mix only what you need, when you need it • Recycling-Friendly: Supports the use of recycled materials when needed ⸻ ? Multi-Purpose Capability – One Platform, Many Solutions: In addition to concrete production, the PVB150 is engineered to serve as: • Mechanical Stabilization Plant • Cold Asphalt Mixing Plant • Emulsion Mixing Plant • Soil Compound Mixing Plant This multi-functional system makes Polygonmach PVB150 the most versatile solution on the market for road construction, infrastructure development, and short-term or small-to-medium scale projects. ⸻ ?? 100% Made in Turkey | Smart Technology | High Performance | Eco-Friendly Operation ✅ Replace fixed plants with a smarter solution. ✅ Reduce setup costs, increase mobility, boost site efficiency. ⸻ ? Contact us today and transform your jobsite! ? ? ?

Condition: used, Mains choke, mains filter, frequency converter, frequency converter, drive converter, line filter. Reactor , reactor, suppression choke Cjdpekia T Aefx Afloaa -Manufacturer: Fanuc, mains choke Reactor -Type: A81L-0001-0156 -Dimensions: 125/105/H135 mm -Weight: 6,3 kg

Condition: ready for operation (used), Heinzen (HMI) centrifugal batch spin dryer, Model SD 300 ES Caodpfx Afsu Rpwlsloa It includes the following features: * Capacity: up to 1800 kg per hour * Speeds: up to 15 cycles per hour * Stainless steel construction * Lid safety interlock * Basket specifications: – Dimensions: 76 cm diameter x 91 cm deep – 5 mm perforations and false bottom – Volume: 0.42 cbm – Weight: 90 kg

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Cedpfx Ajtndwujfljaa

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Caodpfxjhg Niqo Afloa Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: good (used), Used stainless steel reactor with double jacket, insulation and agitator Item number: 10257 Final use: Chemicals Volume: approx. 8000L Operating pressure: +16/-1 Bar Cedpfx Aod Dwmwofloaa Type: Standing on feet Material (wetted parts): 1.4301 / AISI304 Design: Double jacket and insulated Underbody: dished boiler end Top soil: dished boiler end Tank dimensions: Container inner diameter: 2140mm cyl. height: 1600mm Total height: Ca 3820mm height of the feet: 710mm outer diameter: 2200mm distance drain to floor: 500mm materials: Interior: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 / steel painted facilities: Insulation Double jacket around cylinder Various connections on the top panel Manhole cover on the top floor Agitator with double-acting mechanical seal

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, usable tank capacity: 3,400 l, Equipment: documentation/manual, Hastelloy reactor manufactured by INSTALACIONES INDUSTRIALES GRAU, 3400 liters, with jacket and rear triple-blade agitator. Year 2019. Mounted on 3 support brackets. Manhole diameter: 495 mm. Volume Total capacity 3400 L Codpfx Ajw U Tx Uoflsaa Material Hastelloy C-276 Technical details Year of manufacture 2019 Equipment configuration Agitator Jacket On support brackets Equipment dimensions Internal diameter 1600 mm Cylindrical height 1600 mm Transport information Width 2300 mm Height 3000 mm Weight 1150 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, Manufacturer: RUMA Type: MZ 150-B700 Serial No.: 2150.354 Year of manufacture: 2007 Volume flow rates: 1 - 150 l/min Drive power: 4.0 kW (optionally 5.5 kW) Rotor capacity: 15.0 liters Solid matter capacity: 10.0 liters Feed liquid with back pressure (0.7 bar) Possible applications of the centrifuge: In this system, only operate liquids that do not pose a fire or explosion hazard, and in general, only substances according to DIN 6601 (DIN 6601: Resistance of steel tank materials against liquids). Examples:  Emulsions  Oils Caedpfew R Dmhex Aflea  Electrolytes  Process water from vibratory finishing  Media with a pH value between 5.5 and 9.5  The solids to be separated must be specifically heavier than the liquid. Operating manual available in German.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Cjdpfsltmnlex Afljaa Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: ready for operation (used), Year of construction: 1995, Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible. Cjdporn Rc Dsfx Afloaa

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Tank diameter: 2250mm Codpfx Afshg Nk Dsleaa heatable/coolable double jacket Enamelled tank

Condition: ready for operation (used), Used stainless steel reactor with double jacket and insulation item number: 10255 Final use: Chemicals Volume: approx. 7000L Working pressure: +6/-1 Bar Operating pressure double jacket: +12Bar Operating temperature: Max. 200°C Type: Standing on feet with claws Material (wetted parts): 1.4301 / AISI304 Design: Double jacket and insulated Underbody: dished boiler end Top plate: dished end with flange ring Operating pressure according to type plate: ATM Tank dimensions: Container inner diameter: 1790mm cyl. height: 950mm Total height: Ca 1860mm height of the feet: 670mm materials: Interior: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 / steel painted facilities: Top panel completely removable, flanged Insulation Cedpfxed Dwkws Afljaa Double jacket around cylinder and underbody Various connections on the top panel Manhole cover on the top floor

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING AND EDGEBANDING FOR BATCH ONE Caodpfx Aeifnzdjflja Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open Feeding speed (adjustable) m/min 7-35 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed system A2 / 30 Pre-milling Unit (vertical joint trimmers) by N.C. 75.34 (2 x Kw 6,6) Glueing Unit (P.U.R. Glue + Quick Melt system) 2 - VTG 3-48 + 286.205 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 48 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 (CN horizontal positioning) Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,18 x 4) No. 3 Milling grooving units by N.C. 08.190 (Kw 4,5 x 2 + Kw 6,6 x 1)

Condition: not inspected (used), Volume: Approx. 5000 L Caedpfohg Nlpjx Aflea Type: Standing on three feet Tank diameter: 2100mm heatable/coolable double jacket

Condition: good (used), Used stainless steel reactor with double jacket, insulation and agitator 3 pieces available Item number: 10264 Last use: Chemistry Cajdpfx Afjd Dym Njlja Volume: approx. 2000L Operating pressure: +2 bar Type: Vertical on feet Material (wetted parts): 1.4301 / AISI304 Design: Double jacket and insulated Bottom: dished bottom Top base: dished base, flanged Container dimensions: Tank inner diameter: 1200mm Cylinder height: 1520mm Total height: approx. 2550mm Height of feet: 290mm Outer diameter: 1400mm Distance drain to floor: 110mm Materials: Inside: 1.4301 / AISI 304 Exterior: 1.4301 / AISI 304 Equipment: Insulation Double jacket Flanged top floor Various connections on the top floor Dome cover on the top floor EKATO agitator / propeller

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F Casdpfxjinigmj Aflea M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) recently added (in a technological "revamping" operation) Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Mod. TFU200/L/30/12/S

Condition: good (used), Used stainless steel reactor with magnetic stirrer Cedpfx Ajfcixrefljaa Item number: 10461 Last use: cosmetics Volume: approx. 80 liters Type: Standing on 3 feet Material (wetted): 1.4404 stainless steel Construction: Single wall Bottom: Cone bottom Top bottom: Curved Operating pressure according to type plate: -1 /+3 Bar Operating temperature: 95°C Tank dimension: Outer diameter: 610mm height of the feet: 1730mm distance drain to floor: 1620mm total height: 2450mm total width: 760mm Total length: 610mm Materials: Interior: 1.4404 / AISI316 Outer parts: 1.4301 / AISI304 Facilities: Magnetic stirrer Load cells Outlet: DN50mm manhole: 200mm Spray head Various connections Various accessories

Condition: used, Year of construction: 2003, Used pressure vessel Final use: Pharmaceutical industry Item number: 10162 Volume: 92 litres Type: Standing on rollers Material (wetted): AISI 316 stainless steel Number of fixations: 4 rolls Floor: Kloepperboden Top soil: Kloepperboden Operating pressure according to type plate: +1.5/-1Bar Max. operating temperature: +150°C Extras: Sight glass on the top floor, rolling frame, spray head Dimension of container: Cjdpfxsdcr H Ss Afleaa Inner diameter: 560mm Outside diameter: 570mm height of the rolls: 130mm distance drain to floor: 830mm total height: 1310mm total width: 1310mm materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 facilities: Nameplate: Yes Discharge: bottom valve