Used Batch Pasteurizer for sale (1,355)

Condition: new, functionality: fully functional, For the gentle preservation of liquid foods with or without carbon dioxide in pre-filled bottles, jars, pouches, or cans. Depending on the type of container, 240–360 l/h can be pasteurized. A wide range of bottle shapes can be used (milk bottles, beer bottles, preserving jars, etc.). The desired product temperature and holding time can be electronically controlled between 0 and 99 minutes. The display is clear and easy to operate. Nominal heating capacity: 20,000 W (up to 360 l/h) Connected load: 20.15 kW Electrical connection: 400V 50Hz (3-phase, 16A) External dimensions: Length: 2214 mm Width: 870 mm Height (= working height): 1090 mm Hjdpfx Amsw Aw T Te Ujt Water bath internal dimensions: Length: 1770 mm Width: 800 mm Maximum bottle height: 330 mm Empty weight: 220 kg Water capacity: approx. 345 l

Condition: new, functionality: fully functional, Depending on the vessel shape, 120–240 l/h can be pasteurized. A wide range of bottle types can be utilized (milk bottles, beer bottles, preserving jars, and more). The desired product temperature and holding time can be set electronically from 0 to 99 minutes. The display is easy to read and user-friendly. Water capacity: ~230 l Weight: 185 kg (empty weight) Height: 1,090 mm (working height) Hedpsw Aw R Ejfx Am Uot Width: 705 mm Length: 1,880 mm Electrical protection: 16 A Electrical connection: 400V 50Hz (3-phase) Electrical power: 20.15 kW Nominal capacity: up to 240 l/h

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, PASTEURIZER machine for sale. Manufacturer: Tomo Varga d.o.o. Year of manufacture: 2016. The machine is in working condition and ready for operation after reassembly. Detailed information about the machine: The pasteurization chamber reaches an operating temperature of 85 to 100°C. Hedpfx Amewp E Hnj Uot Batch filling in carts 850x900x1350 mm, which can be carried into the chamber with a forklift and stacked on top of each other. Pasteurization is done with direct steam. The flow of steam inside the chamber is directed by a 5 KW fan. Regulation of temperature and pasteurization time from 60 to 100°C. Wall and door insulation 150 mm thick. The chamber is made of stainless-steel sheet AIS I304. Capacity 1056 polypropylene bottles of 1.5 l. The dimension of the whole machine is 270 x 300 cm It also has a smaller electrical cabinet but that can stand separate (see picture called external electric cabinet) Included with the device: 4X carts for inserting products into the chamber and an electrical cabinet with control panel (Touch screen) The device is disassembled for transport and can be viewed in this condition at the following location: Posavska ulica 59, 10372 Oborovo (Glazir d.o.o.). Working hours: Monday - Friday (from 08:00 to 14:00). For additional information, please contact via phone number listed or email for company GLAZIR d.o.o.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Hjdpfxsxpfuie Am Ust Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 2018, condition: excellent (used), Kiremko batch fryer (KCLIG020) x 2 available (YOM 2018/2012) 2 x Kiremko batch fryers, previously used for potato crisps 20kg per hour each line. (40kg per hour total) Both Kiremko fryer lines come with a slicer. One slicer Fam and the other Urschel. Hjdpfxeznv Tye Am Uet In excellent condition, fully working. Both lines come with extractors and fire suppression kit.

Condition: used, machine/vehicle number: 007694, Position 1: Panel Feeding and Loading HOMAG-PROFI KAL330/7/A3/WZ Hodjwuuf Rjpfx Am Ust Position 2: Single Edgebanders HOMAG-PROFI KAL330/7/A3/WZ Position 3: Panel Return Systems HOMAG-PROFI KAL330/7/A3/WZ

Condition: good (used), Year of construction: 2019, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: Hodpfx Aszp E Sbem Uet 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, Refurbished at Industrial Microwave Services Ltd to comply with UK Safety Standards. • Manufacturer/Brand: Tianjin Leici Electronic Technology Co., Ltd. (A prominent Chinese specialized manufacturer of industrial microwave drying systems and component integration). • Core Subsystem Model: MG1000 (Specifically utilizing the MG1000 Microwave Inverter Power Supply units coupled with dedicated industrial air-cooled magnetrons which have been upgraded). • Equipment Classification: 18kW Industrial Tumbling Cage Microwave Drying/Sterilization Oven. The 18kW total operating rating is achieved structurally by stacking 18 modular 1kW MG1000 power-and-magnetron sets together inside the machine grid. Machine External Dimensions: 1550mm Wide - 1178mm Depth - 1800mm High Internal Cavity Depth: 900 mm Door Width: 680mm 6 x Internal S/S trays - 805mm long - 295mm Wide - 9mm Depth 18Kw at 100amps 3 phase + neutral needed Weight approx. 500kg. Hjdpfoyv H T Aox Am Uet Refurb Notes 1. Control system being fitted with a siemans PLC, controlled from a 4” siemans H.M.I. 2. Applicator structural strengthening and seam welding of all joints. 3. Emergency stop safety systems to conform to U.K. safety standards. 4. Strengthen the main frame to enable the equipment to moved without damage. 5. Improve the Magnetron launch inputs to the cavity. 6. Fit serviceable covers on all Magnetron ports inside applicator cavity.

Condition: like new (used), BARRIQUAND STERIFLOW Laboratory Rotary Autoclave – 1 Cage BARRIQUAND STERIFLOW laboratory rotary autoclave with a capacity for 1 cage, designed for the development, testing, and validation of sterilization and pasteurization processes for packaged food products. Hjdpfszbi U Ejx Am Uot Its single-cage configuration and rotary system make it particularly interesting for pilot plants, R&D departments, technology centers, and manufacturers who need to conduct thermal treatment tests on a smaller scale before transferring the parameters to larger-capacity industrial equipment. The system allows for controlled rotation of the load during the thermal cycle, which can promote heat transfer and homogeneity of the treatment in certain products and formats. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Laboratory/pilot rotary autoclave -Capacity: 1 cage -Load rotation system -Application: Sterilization/pasteurization -Batch thermal processing -Horizontal chamber -Stainless steel construction -Large-diameter front door -Safety locking system -Motorized rotation drive -Internal process distribution system -Process pipes and valves -Designed for testing and development of thermal processes -Suitable for pilot plants and small-batch production PROCESS The BARRIQUAND STERIFLOW 1-cage model allows for the reproduction, on a reduced scale, of industrial processes for the thermal treatment of packaged foods. The products are introduced into the chamber and subjected to the programmed cycle of heating, thermal holding, and cooling. During the process, rotation can be applied to the load, allowing evaluation of its influence on thermal transfer and product behavior. This configuration is particularly useful for conducting product testing, recipe development, cycle optimization, process validations, and trials with new packaging formats. APPLICATIONS Especially suitable for R&D departments, laboratories, pilot plants, technology centers, and food industries that need to develop or validate processes before their implementation on an industrial scale. Depending on its configuration, it can be used for trials with cans, jars, and other packaging compatible with thermal treatment and autoclave rotation. Its combination of BARRIQUAND STERIFLOW technology, rotary system, and 1-cage capacity offers a flexible solution for research, development, and pilot production. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Used, universal high-speed mixer Tetra Pak Tetra Scanima B200-500VAA with a jacket and vacuum operation capability. This Tetra Pak Tetra Scanima B200-500VAA high-speed mixer with a jacket and vacuum operation capability has a total internal volume of approximately 700 liters, and a working volume of approximately 500 liters (net volume). The universal Tetra Pak Tetra Scanima B200-500VAA high-speed mixer with a jacket and vacuum operation capability is equipped with a variable-speed turbo high-speed mixing impeller with a bottom mount and a scraper impeller with a top mount. The Tetra Pak Tetra Scanima B200-500VAA high-speed mixer with a jacket and vacuum operation capability is equipped with a built-in vacuum pump and a fully integrated control panel with an Allen Bradley PLC controller, an Allen Bradley touchscreen, an HDMI connector, and a frequency-controlled inverter. The Tetra Pak Tetra Scanima B200-500VAA high-speed mixer with a vacuum jacket and high-speed operation capability is equipped with a patented Dynamic High Shear HS mixing head and can operate in High Shear or Low Shear mode, depending on the product and the required consistency of the mixture. The design of the Dynamic HS head also enables CIP cleaning behind the main seals. The Tetra Pak Tetra Scanima B200-500VAA high-speed mixer with a vacuum jacket and high shear function is a versatile, universal mixer, ideally suited for the production of emulsions, pastes, creams, processed cheeses, cream cheeses, mayonnaise, plant-based vegan cheeses, sauces, and ketchup. It is very popular in the food, cosmetic, and pharmaceutical industries, as well as in the beverage industry. The universal Tetra Pak Tetra Scanima B200-500VAA high-speed mixer with a vacuum jacket and high shear function is equipped with an external recirculating jacket for heating or cooling and direct steam injection for cooking/pasteurization. The Tetra Pak Tetra Scanima B200-500VAA high-speed mixer with a vacuum jacket and high shear function is currently available for sale. Specification: Brand: Tetra Pak Processing Type: Tetra Pak High Shear Mixer B200-500VAA Model: Tetra Pak Scanima Batch Vacuum Capable Universal High Shear Mixer Serial Number: T5845706606 Year of manufacture: 2017 Total internal volume: approx. 710 liters Net working capacity: approx. 500 l Batch processing parameters: Hedpfozvuwaox Am Ust Capacity (kg per hour): approx. 3000 kg per hour (varies depending on the actual product and process) Capacity (batches per hour): approx. 6 batches per hour (varies depending on the actual product and process) Jacket: Yes, external recirculating jacket for heating (or) cooling Steam injection: Internal direct steam injection Steam consumption: approx. 500 kg per hour Cooling water consumption: approx. 5000 l/h Tank operating pressure: -1 (full vacuum) to +0.5 bar Jacket operating pressure: 4 bar Maximum vessel operating temperature: 111°C Maximum jacket operating temperature: 150°C Installed power: 52 kW, 380-480 V, 3-phase, 50/60 Hz High-speed, high-shear mixing impeller: Model: Dynamic HS mixing head with CIP cleaning behind the main seals Available mixing modes: high-speed mode and low-speed mode High-speed, high-shear mixing impeller mounted from below Speed: variable

Condition: like new (used), Horizontal Mixing Tank ROSSI & CATELLI 3,000 L – Stainless Steel ROSSI & CATELLI 3,000-liter horizontal mixing tank, designed for the mixing, homogenization, and intermediate storage of liquid and semi-liquid products in industrial processes within the food industry. Manufactured by ROSSI & CATELLI, the equipment features a horizontal cylindrical configuration and includes a motorized agitation system, allowing the product to remain in motion and achieve uniform mixing throughout the process. Its 3,000-liter capacity and stainless-steel construction make it a particularly interesting solution for facilities that require processing large volumes of product. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Type: Horizontal mixing tank -Capacity: 3,000 liters -Horizontal cylindrical configuration -Agitation/mixing system -Driven by a motor-reducer -Stainless steel construction -Integrated support structure -Top inspection/access hatch -Sanitary product connections -Product inlet and outlet Hedpfx Amezw E Aij Ust -Integrated piping and connection system -Designed for batch industrial processes -Hygienic construction for the food industry -Integrable into existing processing lines APPLICATION The ROSSI & CATELLI 3,000 L is designed to perform mixing, homogenization, accumulation, and product maintenance operations within an industrial line. The agitation system keeps the components in motion, promoting uniform distribution and helping to prevent separation or sedimentation during certain phases of the process, depending on the characteristics of the product. It can be integrated with: Preparation and mixing systems Sanitary pumps Heat exchangers Pasteurizers Homogenizers Dosing systems Buffer tanks Filling equipment Complete processing lines APPLICATIONS Especially suitable for juice and beverage industries, fruit and vegetable processors, sauce manufacturers, purée producers, concentrate manufacturers, and other food industries that require a large-capacity tank with a mixing system. Depending on its configuration, it can be used with juices, purées, sauces, tomato products, concentrates, fruit preparations, and other liquid or semi-liquid products. The combination of ROSSI & CATELLI, 3,000-liter capacity, horizontal configuration, and agitation system provides a robust solution for industrial mixing and intermediate storage processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), total length: 8,088 mm, total width: 2,500 mm, total height: 2,095 mm, overall weight: 4,000 kg, Static Autoclave BARRIQUAND STERIFLOW 8 Baskets – Stainless Steel Static autoclave BARRIQUAND STERIFLOW with a capacity of 8 baskets, designed for the sterilization, pasteurization, and heat treatment of packaged food products in industrial batch processes. Manufactured by BARRIQUAND STERIFLOW, the equipment is designed to perform controlled thermal cycles of heating, holding, and cooling, offering a high-capacity solution for industrial canning production lines. Its static configuration of 8 baskets, stainless steel construction, and automatic control system make it particularly suitable for facilities with high production volumes. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Industrial static autoclave -Capacity: 8 baskets -Application: sterilization / pasteurization -Static operation -Batch heat treatment -Large-capacity horizontal chamber -Stainless steel construction -Large-diameter front door -Mechanical safety locking system -Automatic cycle control -Control panel with Siemens HMI -Process parameter control -Integrated piping and valve system -Designed for industrial production -Integrable into automatic sterilization lines PROCESS The BARRIQUAND STERIFLOW with 8 baskets is designed to perform controlled heat treatments on previously packaged products. The loaded baskets are placed into the chamber, and once closed, the programmed cycle is executed, controlling the different phases of heating, thermal holding, and cooling. As it is a static autoclave, the packages remain stationary during the process, making it suitable for a wide variety of products and formats that do not require agitation. It can be integrated with: Basket loading and unloading systems Basket conveyors Automatic loaders and unloaders Transfer systems Hsdpfx Amozkfx Dj Uot Process water preparation equipment Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, vegetable products, fish and seafood, meat products, and pet food that require industrial sterilization or pasteurization processes. Depending on the configuration and process, it can be used with cans, jars, trays, pouches, and other packaging compatible with autoclave heat treatment. The combination of BARRIQUAND STERIFLOW technology, static operation, and a capacity of 8 baskets provides a high-capacity solution for industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, functionality: unexamined, machine/vehicle number: 0035719, Professional combination soft serve ice cream machine, Frigomat Twin 35, new and in original packaging. This machine combines a pasteurizer and a freezing cylinder and is suitable for ice cream parlors, the food service industry, and food production. Features and equipment: - Combination of pasteurizer and batch freezer - Automatic and semi-automatic programs - Suitable for granita, soft serve ice cream, and desserts Hsdpfjzrn Azex Am Uot - Electronic consistency control IES - Stainless steel container and robust agitator Technical data: - Production capacity: approx. 35 kg/h - Batch size: 2–6 kg - Power: 9 kW - Connection: 400 V, 3-phase - Weight: approx. 323 kg - Dimensions: approx. 550 x 960 x 1,380 mm - Pasteurization up to 105 °C Documentation as well as warranty and CE certificates are available. Location: 65618 Selters (Taunus), Germany.

Condition: like new (used), Static Autoclave BARRIQUAND STERIFLOW 6 Baskets – Stainless Steel Static autoclave BARRIQUAND STERIFLOW with a capacity for 6 baskets, designed for the sterilization and thermal treatment of packaged food products in industrial processes. Manufactured by BARRIQUAND STERIFLOW, a specialist in thermal treatment systems, this autoclave is designed to operate using controlled cycles of heating, sterilization, and cooling, guaranteeing reproducible process conditions. Its industrial construction in stainless steel, together with the automatic control system, allows it to be integrated into canning plants and production lines that require pasteurization or thermal sterilization processes. MAIN FEATURES Manufacturer: BARRIQUAND STERIFLOW Type: Industrial static autoclave Capacity: 6 baskets Application: Sterilization / thermal treatment Batch process Horizontal chamber Stainless steel construction Large-diameter front door Mechanical safety locking system Automatic cycle control Control panel with Siemens HMI Control of the different process parameters Integrated piping and valve system Designed for industrial operation Suitable for integration into sterilization lines PROCESS The BARRIQUAND STERIFLOW 6J is designed to perform controlled thermal treatments of previously packaged products. The baskets with product are placed into the autoclave chamber, and once closed, the programmed cycle is automatically executed, controlling the different phases of heating, thermal holding, and cooling. The system allows processing different types of packages and products according to the recipe, sterilization parameters, and installed configuration. Hodpfxozbmvme Am Ust It can be integrated with: Basket loading and unloading systems Basket conveyors Automatic loaders and unloaders Process water preparation systems Automatic sterilization lines Handling and palletizing systems APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, pet food, and other food processing plants that need to sterilize or pasteurize packaged products. Depending on the configuration and process, it can be used with cans, jars, trays, pouch bags, and other packaging suitable for thermal treatment in an autoclave. The combination of BARRIQUAND STERIFLOW technology, a capacity for 6 baskets, and automatic process control provides a robust solution for industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Hsdpfx Aezhnlzjm Uot Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Hsdpfozhn Rqex Am Ujt Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Year of construction: 2020, condition: ready for operation (used), An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible. Hjdpfsyh Nvgox Am Ust

Condition: like new (used), functionality: fully functional, SURDRY 6-Cage Oscillating Autoclave – Industrial Sterilization SURDRY oscillating autoclave with a capacity for 6 cages, designed for the sterilization and thermal treatment of packaged food products in industrial batch processes. The equipment incorporates an oscillating load movement system during the thermal cycle, allowing the packages to be kept in controlled motion during specific phases of the process. This technology is particularly beneficial for products where agitation can promote heat transfer and reduce process times, depending on the product, format, and recipe. Its 6-cage configuration provides a high processing capacity for continuous production industrial facilities. MAIN FEATURES -Manufacturer: SURDRY -Type: Industrial oscillating autoclave -Capacity: 6 cages -Application: sterilization / pasteurization -Oscillating load movement system -Batch thermal treatment -Horizontal chamber -Industrial construction in stainless steel -Large-diameter front door -Safety locking system -Motorized drive of the oscillation system -Control of cycle parameters -Integrated piping and valve system -Designed for industrial production -Integrable into automatic sterilization lines PROCESS The SURDRY 6-cage oscillating autoclave is designed to perform controlled thermal treatments on previously packaged products. The loaded cages are placed into the chamber, and once closed, the programmed cycle is carried out through different phases of heating, thermal maintenance, and cooling. During the treatment, the system allows for the application of a controlled oscillating movement to the load. Depending on the product, this agitation can improve internal circulation and promote faster and more uniform heat transfer. It can be integrated with: -Automatic loading and unloading systems -Cage conveyors -Basket loaders and unloaders -Cage transfer systems -Process water preparation equipment -Automatic sterilization lines Hedpex Tiliofx Am Uet APPLICATIONS Especially suitable for canning industries, manufacturers of ready meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial pasteurization or sterilization processes. Depending on the configuration and process, it can work with cans, jars, trays, pouches, and other packaging suitable for thermal treatment in an autoclave. The combination of SURDRY technology, oscillation system, and 6-cage capacity provides a particularly interesting solution for high-capacity industrial sterilization facilities. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), LAGARDE 1-Cage Rotary Autoclave – Industrial Sterilization LAGARDE rotary autoclave with a capacity for 1 cage, designed for the sterilization, pasteurization, and heat treatment of packaged food products through industrial batch processes. Manufactured by LAGARDE, a specialist in autoclaves for the food industry, this equipment incorporates a load rotation system during the thermal cycle, which is particularly beneficial for products where heat transfer can be improved by the movement of the packaging. The combination of controlled heat treatment and rotation allows it to be used in a wide variety of canning and prepared food applications. MAIN FEATURES -Manufacturer: LAGARDE -Type: Industrial rotary autoclave -Capacity: 1 cage -Application: sterilization / pasteurization -Load rotation system Hedpozw D T Hsfx Am Ujt -Batch thermal processing -Horizontal chamber -Stainless steel construction -Large-diameter front door -Mechanical safety locking system -Motorized rotation drive -Automatic cycle control -Integrated control panel -Process piping and valve system -Designed for industrial food applications PROCESS The LAGARDE 1-cage rotary autoclave is designed to perform controlled heat treatments on previously packaged products. The cage containing the packages is placed inside the chamber, and once closed, the programmed cycle is executed, controlling the different phases of heating, thermal maintenance, and cooling. During the process, the system allows for the rotation of the load, generating movement of the product inside the package in applications where this is appropriate. This can promote thermal transfer and treatment homogeneity, depending on the product, format, and recipe used. APPLICATIONS Particularly suitable for canning industries, manufacturers of prepared dishes, sauces, vegetable products, meat products, pet food, and other food industries that require sterilization or pasteurization processes. Depending on its configuration and process, it can be used with cans, jars, and other containers compatible with heat treatment and rotation in an autoclave. Its 1-cage configuration is particularly interesting for batch production, industrial trials, the development of new products, or facilities that require flexibility between different recipes and formats. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Rotary Autoclave BARRIQUAND STERIFLOW 5 Baskets – Industrial Sterilization BARRIQUAND STERIFLOW rotary autoclave with a capacity of 5 baskets, designed for the sterilization, pasteurization, and heat treatment of packaged food products through industrial batch processes. The equipment incorporates a load rotation system during the thermal cycle, allowing the packages to be kept in controlled motion throughout the process. This technology is particularly interesting for products where heat transfer can benefit from agitation, promoting homogeneous heat treatment and, depending on the product and format, optimizing process times. Its 5-basket configuration provides a high capacity for industrial production facilities. MAIN FEATURES -Manufacturer: BARRIQUAND STERIFLOW -Type: Industrial rotary autoclave -Capacity: 5 baskets -Application: sterilization / pasteurization -Load rotation system -Batch heat treatment -Horizontal chamber -Industrial construction in stainless steel -Large diameter front door -Mechanical safety locking system -Motorized drive for rotation -Automatic control of process parameters Hsdpfxjzbt Sze Am Uot -Integrated piping and valve system -Designed for industrial operation -Integrable into automatic sterilization lines PROCESS The 5-basket BARRIQUAND STERIFLOW rotary autoclave is designed to perform controlled heat treatments on previously packaged products. The baskets are placed into the chamber, and once closed, the programmed cycle is executed through the heating, thermal holding, and cooling phases. During the treatment, the system allows for controlled rotation of the load, generating product movement within the package when its characteristics allow. This can favor heat transfer and achieve a more uniform thermal distribution. It can be integrated with: -Basket loading and unloading systems -Basket conveyors -Automatic loaders and unloaders -Transfer systems -Process water preparation equipment -Automatic sterilization lines APPLICATIONS Especially suitable for canning industries, manufacturers of ready-made meals, sauces, vegetable products, meat products, pet food, and other food industries that require industrial sterilization or pasteurization processes. Depending on the configuration and process, it can be used with cans, jars, and other packaging compatible with heat treatment and rotation in the autoclave. The combination of BARRIQUAND STERIFLOW technology, rotary system, and 5-basket capacity provides a particularly interesting solution for industrial sterilization facilities with high capacity. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Features fan assist / air circulation (electric). Supplied with 15 x bakery racks. Located in Northern Ireland and ready to collect. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Date of manufacture - 1992 ✅ Rating 500-000 General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Hodpfx Aoxb Alvsm Uot Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Condition: like new (used), FISHBAM Double-Door Static Autoclave / Cooker – 4 Cages FISHBAM double-door static autoclave / cooker with a capacity of 4 cages, designed for the cooking, pasteurization, and heat treatment of food products in industrial batch processes. Its double-door configuration allows for loading from one end and unloading from the opposite end, facilitating the organization of the production flow and its integration into facilities with separation between entry and exit zones. Hedpfx Ajyufk Njm Ust The equipment features a large-capacity horizontal chamber, industrial-grade construction in stainless steel, and an automatic system for controlling process parameters. MAIN FEATURES -Manufacturer: FISHBAM -Type: Industrial static autoclave / cooker -Capacity: 4 cages -Configuration: double door -Static operation -Batch heat treatment -Horizontal chamber -Stainless steel construction -Large-diameter doors -Mechanical safety locking system -Automatic process control -Integrated control panel -Pressure indicators -Process piping and valve system -Designed for industrial operation -Integrable into cooking and heat treatment lines PROCESS The 4-cage FISHBAM is designed to perform controlled heat treatments on food products. The loaded cages are placed inside the chamber, and once closed, the programmed cycle is executed, controlling the different phases of the treatment. Depending on the application and equipment configuration, it can be used for cooking, pasteurization, and other batch heat treatment operations. The double-door configuration allows for establishing a continuous workflow, with loading and unloading from opposite sides of the equipment. It can be integrated with: Cage loading and unloading systems Cage conveyors Transfer systems Cooking lines Cooling systems Product handling equipment Complete food processing lines APPLICATIONS Especially suitable for canning industries, fish and seafood processors, meat products, vegetables, ready meals, and other food industries that require industrial batch heat treatment processes. The combination of 4 cages, static operation, and a double door provides a particularly interesting solution for facilities that need high processing capacity and an organized flow between the loading and unloading areas. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Hodpfx Ajzxnu Dsm Ust Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, We are offering for sale a complete, fully functional ZREMB concrete plant, designed for the production of ready-mix concrete, precast elements, and paving stones. The plant is equipped with high-quality components from reputable manufacturers, automatic control, and a modern recycling and heating system, enabling year-round production. Key equipment: ZREMB Concrete Plant • Complete steel structure with enclosure, • Automatic control system SAUTER GmbH SUS 4.0, • Control container, • Full automation of the production process. ORU Mixers • Planetary mixer 750 l, • Planetary mixer EPM 3000 ES (3000 l), • EPM 3000 equipped with two independent discharge outlets, increasing production capacity. Hedpfx Amezw Aq Ro Ujt Dosing System • Lifting and filling device, • Tipping skips, • Buffer tank above the mixers, • Aggregate distributor for two mixers, • Cement scales for both mixers, • Water scale with flow meter, • Chemical additive dispenser, • Liquid pigment dispenser, • Microwave moisture probes in the mixers and aggregate tanks. Material Storage • Aggregate storage silo 6 × 25 m³ with a roof, • Aggregate belt scales, • 3 cement silos with complete equipment, • 1 two-chamber silo, • 5 screw conveyors. FEGO INDUSTRY Recycling System Complete installation for concrete and washout water recovery: • Capacity 12 m³/h, • Aggregate washing 2–32 mm, • Aggregate separator, • Washout water tank 40 m³, • Intermediate tank 1.5 m³, • Recycling tank, • 3 slurry pumps. FEGO INDUSTRY Heating System Water heating • Boiler 255 kW, • Capacity: • 13,500 l/h (10°C → 45°C), • 6,750 l/h (10°C → 70°C), • Fuel: light fuel oil, • Fuel consumption: 21.5 kg/h. Aggregate heating Hot air system: • Thermal power 250 kW, • Air temperature 110–120°C, • Capacity 6500 m³/h, • Fan 18.5 kW. Thanks to the installation, production is possible even during the winter season. The sale also includes: • Complete supporting structure, • Working platforms, • Enclosure made of sandwich panels, • Technological installations, • Electrical installations, • Complete control system, • Technical documentation (if available). Advantages - Automatic concrete production - Two independent ORU mixers - Two discharge outlets from the EPM 3000 mixer - Complete washout water recycling - Water and aggregate heating - Possibility of operation throughout the year - Complete installation ready for dismantling and reassembly Interested parties are invited to contact us by phone at 605 583 061 to obtain detailed information and arrange a presentation of the equipment.

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Hjdpozlpv Aofx Am Uot Inspection possible. Transport can be arranged. Price net plus VAT.