Used Belt for sale (9,454)

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Bodpfx Absztn N Ro Dsll Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: ready for operation (used), * Brand: Kleemann * Type: dosing belt conveyor with hopper * A-A length: 8300 mm, beltwidth= 800 mm. Bsdpfxszu Nzko Ab Dsll * Driving : 7,5 kW gearbox. * Dim. Hopper: 6000 X 1800 X 1150 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1.1 kW (1.50 HP), Conveyor belt system Blsdpfx Abjytnq As Djl specify the your request and get offer

Condition: good (used), Year of construction: 2020, functionality: fully functional, Coming soon: Avermann chain belt conveyor, KGS GB1500, year of manufacture 2020 Technical data: Manufacturer: Avermann Maschinenfabrik Year of manufacture: 2020 Length of infeed belt: 6804 mm Length of incline belt: 11056 mm Gooseneck: 2167 mm Incline: 27.5° Usable width: 1400 mm Bjdpfxezyl H Te Ab Djll Note: The conveyor belt is expected to be dismantled in mid/late September and can be inspected in operation until then, if desired. The baler shown in the photos is not included in the scope of delivery and can be purchased as an option. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is subject to change, prior sale is possible, and it can be revoked at any time. Inspections are possible by arrangement. Sale is made upon advance payment, ex works, without warranty.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide-belt sanding machine with electronic segmented sanding pad and finish sanding. Ideal sanding machine for interior finishing companies, also suitable for intermediate sanding before painting. Edge sanding machine with combination unit and electronic segmented pressure bar, edge segments can be switched on and off. Segment width of the pressure bar 35mm. Contact roller pneumatically adjustable, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s. Belt feed steplessly adjustable via frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900mm by adjusting the top part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340mm. Workpiece height approx. 3 to 150mm. Common sanding belt dimension 1360 x 1900mm. 3 rubberized pressure rollers. Infeed roller table and foldable outlet table. Preparation for vacuum blower. The belt is perforated and connectors for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Bodpfx Abezqvmrj Doll Without the illustrated connection cable. Original paint, only retouched in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1976, Working width 1350 mm Number of sanding units x st. Second-hand machine Year of manufacture: 1976 Features and technical specifications: - grinding from below - Material feed via rubber rollers - Non-contact control of oscillation - Quick-change pressure bar - Electric motor-driven adjustment of tool thickness with an easy-to-read display Digital display - Push-button control with contactor control - Sanding width 1350 mm Bledezk Nyrjpfx Ab Dsl - Maximum workpiece thickness: 150 mm - Sanding belt width 1360 mm - Sanding belt length 1900 mm - Roller feed speed switchable between 10 and 20 m/min - Compressed air connection: 6 bar - Air consumption approx. 180 NL/min Motor power 17.5 kW Dimensions W x D x H 1800 x 1100 x 1520 mm Weight: 2,600 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1995, Number of belts: 2 Max. working width: 920 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibrating roller Design of 1st roller: Grooved steel roller Abrasive belt length 1st unit: 1525 mm Abrasive belt width 1st unit: 930 mm Abrasive belt speed 1st unit: 16 m/sec 2nd belt: Combination unit Bledjzxt Agopfx Ab Djl Design of 2nd roller: Grooved rubber roller Sanding shoe 2nd unit: rigid Abrasive belt length 2nd unit: 1525 mm Abrasive belt width 2nd unit: 930 mm Abrasive belt speed 2nd unit: 16 m/sec Material thickness measuring device: Yes Fixed feed rate: 4.5 + 9 m/min Control: Hand control panel Elec./pneumatic belt oscillation: Yes Infeed height: variable (lower table moves) Table stroke: electro-motoric Table display: mechanical digital display Operating pressure: 6 bar Weight approx.: 1100 kg Motor power: 11 kW Extraction diameter: 200 mm Storage location:

Condition: good (used), functionality: fully functional, The Z-conveyor belt from MFP, featuring timed operation, is for sale. Specifications: Width: 1400 mm, with hopper, 150 mm, along the entire length Inclined belt: 1400 mm Discharge belt: 550 mm Belt speed: 3 m/min Bjdpfx Abezu Iv Tj Djll With timed operation Mobile New belt with 30 mm high cleats, spaced 330 mm apart.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 39 cm³, injection weight: 36 g, mold height (min.): 200 mm, power: 10.2 kW (13.87 HP), Year of manufacture: 2003 Blodexgiaqopfx Ab Djl Clamping force: 25 tons Distance between columns: 270 x 270 mm Screw diameter: 25 mm Injection volume: 39 ccm Injection weight: 36 g for PS Equipment: Conveyor belt, sprue picker, core pull, Euromap Fully inspected! PRICE REDUCED FROM 6500 TO 4950 EUR!!!

Condition: good (used), Used for steaming pasta and other food products. Excellent condition, available for immediate loading. Bjdpfx Aexxd Imjb Dsll

Condition: new, functionality: fully functional, Plastic Modular Belt supplier Blsdpfxeypcd Ne Ab Dol

Condition: ready for operation (used), * Brand: Henkel * On stock: 4 pieces. * 2x: A-A length = 20000 mm. * Beltwidth: 650 mm. * Driving: 7,5 kW gearbox. * 1x: A-A length = 22000 mm. * Beltwidth: 800 mm. * Driving: 11 kW gearbox. * 1x: A-A length = 7500 mm. * Beltwidth: 800 mm. * Driving: 4 kW gearbox. Bljdpfezpzktjx Ab Dol

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece: 200 mm - max. height of workpiece: 180 mm - 2 sanding units: - top: metal roller + sanding shoe + metal roller - bottom: metal roller + sanding shoe + metal roller - top: - 2 pressure rollers, rubber, pulling type - sanding unit - 2 pressure rollers, rubber, pulling type - bottom: - sanding unit - side guide strip - electrically adjustable sanding height, 0.37 kW - 6 feed speed settings + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.75 kW - main motors: 2 x 4 kW - diameter of dust extraction nozzles: 80 mm - overall dimensions (L/W/H): 1500x740x1600 mm - weight: 560 kg ADVANTAGES Bledpfx Aszxqrlob Dol - Made in Germany - 2 sanding units - Unpainted - DTR documentation - Used sander, very good condition Net price: 10900 PLN Net price: 2600 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Catalog number 7431 TECHNICAL DATA - max. width of the workpiece: 950 mm - max. height of the workpiece: 150 mm From above: - metal roller, pressure roller - unit (fluted rubber roller for calibrating + shoe + metal roller) - metal roller, smooth, sliding roller From below: - conveyor belt - pneumatic belt oscillation with photocells - electric table lifting - 2 types of feed speed Bjdpszw Dibofx Ab Dell - main motor: 7.5 kW - feed motor: 0.6 kW - table lifting motor: 0.18 kW - working pressure: 8 bar - diameter of the dust extraction nozzle: 150 mm - dimensions (L/W/H): 1600x1250x2000 mm - weight: 1109 kg ADVANTAGES - German production - additional shoe included - used grinder, very good condition Net price: 19,900 PLN Net price: 4,738 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6582 TECHNICAL DATA - max. width of workpiece: 920 mm - max. height of workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW From above: Bodpfx Aezw Dchjb Doll - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers From below: - 3 slip rubber rollers - conveyor belt - pneumatic tape oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake - diameter of extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg – German made – 2 units – used grinder, very good condition Net price: 24,900 PLN Net price: 5,929 EUR Net price calculated according to the exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), * Brand: Henkel Bedpfx Abozpzpvj Djll * On stock: 1 piece. * Beltwidth: 1000 mm. * Driving: 11 kW gearbox.

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg Bljdpfx Abszw Dvbe Dsl - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Bedpfxex N A Aaj Ab Dell Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: new, Year of construction: 2023, functionality: fully functional, QATM Qcut 500 A Precision Cut-Off Machine Manufacturer: QATM / ATM Qness GmbH Type: Qcut 500 A Year of Manufacture: 03/2023 Machine Type: Automatic Metallographic Cut-Off Machine Condition: New / unused Cutting Disc Diameter: up to 508 mm (20") Drive Power: 15 kW S1 For sale is a new and unused QATM Qcut 500 A precision cut-off machine, manufactured in 2023, with extensive equipment, a belt filter system, and an extraction system. The machine is particularly suitable for the precise cutting and sectioning of samples in metallography, material and component testing, quality assurance, research and development, as well as for industrial laboratory and testing applications. The machine is additionally equipped with the option "Laser alignment aid for easy positioning of the workpiece." Technical Data: Manufacturer: QATM / ATM Qness GmbH Type: Qcut 500 A Year of Manufacture: 03/2023 Country of Manufacture: Germany Power Supply: 400 V / 50 Hz Connected Load: 30.0 kVA Fuse Rating: 32 A Drive Power: 15 kW S1 Cutting Disc Diameter: up to 508 mm (20") Speed at Ø 508 mm: 1000 – 2400 rpm Cutting Disc Arbor: Ø 32 / 40 mm Max. Sample Size at Ø 508 mm: 190 mm Max. Sample Weight: approx. 400 kg incl. clamping device Travel X-axis: 420 mm Travel Y-axis: 280 mm Travel Z-axis: 200 mm Positioning Accuracy Z-axis: 0.1 mm Working Speed X-/Y-axis: 0.001 – 50 mm/s Rapid Traverse X-/Y-/Z-axis: 80.0 mm/s Compressed Air Connection: 6 bar (± 2 bar) Noise Emission: max. 62 dB(A) at idle Operating Hours according to Display: 5 h 47 min Software Version: V 4.30 Belt Filter System: Manufacturer: QATM / ATM Qness GmbH Type: Belt Filter Automatic 285 Year of Manufacture: 03/2023 Belt Filter Type: UR 1030 Belt Filter Year of Manufacture: 2022 Rated Voltage: 3 × 400 V / N / PE, 50 / 60 Hz Rated Current: 100 mA Rated Power: 83 VA Dimensions: Machine Dimensions: approx. 1300 × 1820 × 1250 mm (W × H × D) Table Size without Z-axis: 700 × 500 mm Table Size with Z-axis: 550 × 500 mm Table Plate: Stainless Steel T-Slot Width: 12 mm Machine Weight: approx. 1000 kg Equipment: Option: Laser alignment aid for easy positioning of the workpiece Touchscreen control panel X, Y, and Z-axis control Joystick operation Stainless steel work table with T-slots Enclosed work area with viewing window Coolant nozzles QATM Belt Filter Automatic 285 Belt Filter UR 1030 Filter mist extraction system Coolant / filter unit Bljdjzt N Rvjpfx Ab Djl Tools and clamping accessories according to images Piping and connection accessories according to images Operating manuals and documentation according to images Further accessories according to images Transport Data: Machine Weight: approx. 1000 kg Shipping by freight forwarder possible. Condition: New / unused. Year of Manufacture 2023. The machine has not been used in production. Operating hours according to display: only 5 h 47 min. Very well-maintained optical condition according to images. Display and control are shown as functional. Nameplates are present. Scope of Delivery: 1 × QATM Qcut 500 A Cut-Off Machine 1 × QATM Belt Filter Automatic 285 / Belt Filter Unit Filter mist extraction system Laser alignment aid Tools and clamping accessories according to images Piping and connection accessories according to images Operating manuals and documentation according to images Further accessories according to images. Scope of delivery as shown or described. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2022, overall weight: 6,350 kg, Sanding machine SCM DMC SY TC 1350 Year of manufacture: 2022 Working width: 1350 mm 3 sanding units: - Longitudinal - Transverse - Longitudinal - Brush Note: Blsdpfxszuzkks Ab Djl The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), CATALOGUE NUMBER: 6145 TECHNICAL DATA - max. width of the workpiece: 1100mm - max. height of the workpiece: 140mm 3 units: 1) grooved rubber roller for calibrating, 15kW 2) grooved rubber roller for calibrating, 11kW 3) grooved rubber roller for calibrating, 11kW Top: - sliding metal roller - sliding rubber roller - unit - 2 sliding rubber rollers - unit - 2 sliding rubber rollers - unit - sliding rubber roller Bottom: - feeding table, 3600x1000mm - feed speed adjustable via frequency inverter, 0.25kW - conveyor belt - 3 sliding rubber rollers, guiding - pneumatic belt oscillation with photoelectric sensors Bledpfx Abjzw Dtmo Dsl - belt blowing - electric table lifting - lifting motor 0.75kW - stepless feed speed adjustment - feed motor 2.2kW - with vacuum pump - pump motor 4kW - extraction nozzle diameter 110mm, 80mm - working pressure 6-8 bar - extraction nozzle diameter 3x150, 3x200mm - overall machine dimensions (L/W/H): 3400x2300x2800mm - feeder dimensions (L/W/H): 3000x1300x900mm - pump dimensions (L/W/H): 600x950x940mm - weight approx. 5000kg Net price: 32900 PLN Net price: 7833 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Belt Conveyor 000778 Bljdjtrxd Sspfx Ab Del - Total Length: 7, 4 m - Work length: 6 m - Total Width: 1, 1 m - Belt width: 290 mm - electric motor: 3 kW

Year of construction: 2023, condition: good (used), Belt tensioning system Humboldt HU 6000, manufactured in 2023. Bjdezvzanopfx Ab Dell

Year of construction: 2018, condition: good (used), quantity 1 STK 0 210 mm 0 3000 mm Magnetic plate conveyor (for chips / small metal parts). Bjdezwxx Rjpfx Ab Doll > CE marking present > Fill with oil before commissioning > Gearbox output — flanged drive, cylindrical shaft

Condition: used, functionality: not functional, total length: 5,150 mm, total width: 130 mm, total height: 1,800 mm, overall weight: 1,200 kg, Heudra auger pump with conveyor belt. This system can be used for the disposal of, for example, fruit waste. The substance is fed onto the conveyor belt, which then transports it to a hopper. From the hopper, the substance is pumped away by an auger pump. The machine is entirely made of stainless steel; the conveyor belt is made of plastic. Dimensions (w x l x h): 130 x 515 x 180 cm Dimensions of conveyor belt: 70 x 300 cm Dimensions of hopper: 80 x 60 x 90 cm deep The control panel for the motors is included, but the control system is missing. Bjdpfjzuyzbex Ab Dell