Used Biesse Akron 435 for sale (321)

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm Fjdpfozt Dh Nox Anlepk • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,832 h, Edgebander manufactured in 2018. This BIESSE JADE 340 features a Biesse HD touchscreen control unit and operates at a feed rate of up to 12 m/min. It accommodates panel thicknesses from 10 to 60 mm and edge thicknesses from 0.4 to 8 mm. If you are looking to get high-quality edge banding capabilities, consider the BIESSE JADE 340 machine we have for sale. Contact us for further details. • Year: 2018 (10/2018, per nameplate) • CE • Axes: not applicable • Key parameters: panel thickness 10–60 mm • Key parameters: edge height 14–64 mm Fodpozt Dfnjfx Anlspk • Key parameters: edge thickness 0.4–8 mm • Documents: Nameplate & usage-counter photos on page 2 • Equipment / Units included: Pre-milling unit • Equipment / Units included: Glue unit + end-cutting (trim) unit • Equipment / Units included: Corner rounding unit • Equipment / Units included: Additional interchangeable glue pot • Equipment / Units included: Radius scraper + glue-joint scraper • Equipment / Units included: Polishing / buffing units • Equipment / Units included: Front & rear anti-adhesive spray units • Condition: Very good condition, in daily production use until sale (per seller's statement) • Usage counter: 526,175 panels processed • Usage counter: 351,289 running metres processed (meter reading 14/05/2026) • Consistent with regular single-shift production

Condition: ready for operation (used), Year of construction: 2017, overall weight: 1,650 kg, product length (max.): 4,168 mm, Edgebander manufactured in 2017. This BIESSE Jade 240 features a panel thickness capacity of 10-60 mm and an edge height range of 14-64 mm. It includes a pre-milling unit, glue application unit, and various trimming units for enhanced functionality. If you are looking to get high-quality edge banding capabilities, consider the BIESSE Jade 240 machine we have for sale. Contact us for further details. Fpedpfx Aozt Dfhonlsk • Technical data: • Panel thickness: 10–60 mm • Edge height: 14–64 mm • Edge thickness (coil): 0.4–3 mm • Edge thickness (solid strips): up to 8 mm • Feed speed: 12 m/min • Minimum workpiece length: 150 mm • Minimum workpiece width at 150 mm length: 85 mm • Minimum workpiece width at 250 mm length: 50 mm • Pneumatic connection: 7 bar • Glue pot capacity: approx. 2 kg • Glue pot heat-up time: approx. 10 min • Dust extraction connections: 100 mm • Standard units: • Pre-milling unit • Glue application unit • End trimming unit • Flush/profile trimming unit • Corner rounding unit • Radius scraping unit • Glue joint scraper • Buffing unit

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 165 mm, number of axes: 4, This 4-axis BIESSE Rover K1232 was manufactured in 2017. It features an extensive X-axis working range of 3,260 mm and a Y-axis working range of 1,260 mm. The machine is equipped with a tool magazine capacity of 16 positions and an electrospindle power of 19 kW. If you are looking to get high-quality CNC machining capabilities, consider the BIESSE Rover K1232 CNC processing center we have for sale. Contact us for further details. • Machine design: Gantry • Tool magazine capacity: 16 positions • Electrospindle power: 19 kW • Total power: 20 kW Fpjdpfx Aozt Dcysnlok

Condition: ready for operation (used), Year of construction: 2017, number of axes: 5, This 5-axis BIESSE Rover A Edge 1643 was manufactured in 2017. It features a versatile CNC machining center with an edge banding unit, ideal for various applications. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover A Edge 1643 machine we have for sale. Contact us for further details. Fpedjzt Dctopfx Anljk BIESSE ROVER A 1643 EDGE - Technical Specification Machine type CNC machining center with edge banding functionModel: ROVER A 1643 EDGEDesigned for machining and edge banding of shaped/profiled panels Configuration shown in the documents indicates a 5-axis setup Working area X-axis working area: 4,320 mm Pendulum working in X: 1,620 mm Y-axis working area: approx. 1,580-1,660 mm Z-axis travel: 180 mm Edge banding X-axis working area: 3,300 mm Edge banding Y-axis working area: 1,540 mm Maximum loading width in Y: 1,900 mm, extendable up to 2,100 mm 5-axis unit 5-axis machining headC-axis: continuous 360° rotationB-axis: continuous 360° rotationB-axis speed: 18 rpmC-axis speed: 18 rpmMaximum spindle speed: 24,000 rpmPower:11 kW in S1 cycle13 kW in S6 cycleMaximum undercut angle: -10°Collision control for the 5-axis unitPrepared for aggregate use on the 5-axis unit Work table and clamping ATS work table8 support beams32 movable carriages32 pneumatic vacuum podsVacuum pods adjustable in 15° stepsPneumatic system divided into 2 working zones in X Vacuum pump capacity: 250 m³/h6 lifting beams for easier loading and unloading28 sensors for detecting lowered stopsStops and positioning8 rear stops8 central stops4 side stops, 2 left + 2 right2 additional side stops4 removable central stops, 2 left + 2 right2 additional central stopsPneumatic positioning and lowering of stops Drilling unit BH 24L drilling head13 vertical independent spindles5 horizontal independent spindlesGrooving saw Ø120 mmMaximum grooving depth: 25 mmSpindle speed programmable up to 6,000 rpm Tool changer 16-position rotary tool magazine Mounted on the X-axis carriage For tools and aggregates Maximum tool/aggregate weight: 7.5 kg Total maximum magazine load: 55 kg Edge banding unit GU60A edge banding unit For panels up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue tank with hot-melt glue systemEdge heating lamp, 600 W NC-controlled edge feeding system Automatic edge cutting Sensor for closed geometric shapes Edge banding accessories 2-roll edge magazine mounted on the X carriage Maximum roll diameter: 800 mm Maximum edge height: 65 mm Corner rounding tool Ø85 mm, HSK F63 Saw aggregate HSK F63 for cuts and grooves, max blade Ø215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with Ø215 mm blade: 68 mm Edge trimming units Combined glue scraping / edge scraping units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment DXF, CIX and BPP import 3D machine simulation Tool management 5-axis machining management by positioning Wizard-based program creation Safety CE compliant Safety mats Safety barriers Safety sensors Modified safety system allowing loading in Y up to 2,100 mm Summary This is a well-equipped BIESSE ROVER A 1643 EDGE CNC machining center with 5-axis machining head and edge banding package. The documents show B and C continuous rotation, 5-axis programming, 5-axis collision control, and a dedicated aggregate flange for the 5-axis unit, so based on these documents it should be treated as a 5-axis machine.

Condition: ready for operation (used), Year of construction: 2014, number of axes: 4, This 4-axis BIESSE Rover K 1532 G was manufactured in 2014. It is a used CNC machining center designed for precision and efficiency. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover K 1532 G machine we have for sale. Contact us for further details. Fjdpezt Dbvjfx Anlspk

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,320 mm, travel distance Z-axis: 150 mm, number of axes: 5, This 5-axis BIESSE Rover A4.30 was manufactured in 2010. It features a working field of 3,060 mm in the X-axis and 1,320 mm in the Y-axis, along with a powerful 12 kW air-cooled electrospindle. The machine includes advanced programming with BIESSEWORKS and a revolving tool changer with 10 positions. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A4.30 machine we have for sale. Contact us for further details. • Worktables and positioning: • 6 ATS panel supports, L 1,280 mm • 18 sliding bases • 6 stops with 115 mm stroke • 6 stops with 115 mm stroke positioned at 1,050 mm • 4 side stops with 115 mm stroke (2 LH + 2 RH) • 4 bar supports • 12 clamping units for narrow workpieces • 12 vacuum modules (132 × 146 × H48 mm) • 6 vacuum modules (132 × 75 × H48 mm) • Vacuum system divided into 2 work areas in X • Pneumatic system for bar supports with 2 independent work areas in X • Spindle and aggregates: • 12 kW (16.1 HP) air‑cooled electrospindle, ISO 30 tool holder • Flange for assembly of aggregates • Preparation for 360° operating unit (C‑axis) • ISO 30 aggregate with 1 spindle, manual rotation, adjustable inclination (extra equipment installed) • Tooling and drilling: • Revolving tool changer with 10 positions on X‑carriage side • Boring head BH 21 L: • 7 + 7 vertical spindles • 4 horizontal spindles in X • 2 horizontal spindles in Y • 1 saw blade in X (Ø120 mm) • BH 21 L boring head with quick‑change connections (extra equipment installed) • Drill bit holders for quick‑connection boring head spindles (extra equipment installed) • Automation and preparation: • Automatic lubrication system • Preparation for belt conveyor for chip and off‑cut removal • Preparation for multifunctional unit or horizontal routing unit • C‑axis operating device with 360° rotation and gear transmission (extra equipment installed; for machines with preparation) • Vacuum, pneumatics, electrics: • 90 m³/h vacuum pump • Auxiliary vacuum system • Blower • Inverter • Air conditioner for electrical cabinet • Control and software: • PC‑based numerical control • 19" LCD monitor • Advanced remote keyboard • BIESSEWORKS advanced programming system • RVA SLOT 1 (extra equipment) • Safety: Fodozt Dbpopfx Anlspk • Safety devices with 2 front safety mats and rear/side protection • Safety devices in conformity with Regulation 2006/42/CE (Rover A 4.30) (extra equipment) Additional equipment • Manual laser barcode reader (not suitable for 2D/QR codes)

Condition: ready for operation (used), Year of construction: 2009, number of axes: 3, This 3-axis BIESSE Skipper 100 was manufactured in 2009. It features a versatile working range with a maximum length of 3,000 mm and a width of 1,000 mm. The machine is equipped with 78 independent drilling spindles, allowing for efficient vertical and horizontal drilling, as well as routing and grooving capabilities. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Skipper 100 machine we have for sale. Contact us for further details. • Workpiece capacity • Length: 90 – 3,000 mm • Width: 70 – 1,000 mm • Thickness: 8 – 60 mm • Working ranges • X-axis • Vertical drilling: 0 – 3,000 mm • Horizontal drilling (X and Y): 0 – 3,000 mm • Continuous routing: 0 – 2,500 mm • Partial routing: 0 – 3,000 mm • Continuous grooving with saw (X direction): 0 – 2,500 mm • Partial grooving with saw (X direction): 0 – 3,000 mm • Y-axis • Vertical drilling: 0 – 1,000 mm • Vertical drilling with 32 mm system: 32 – 1,000 mm • Horizontal drilling in X: 0 – 1,000 mm • Horizontal drilling in Y: 90 – 1,000 mm • Routing: 0 – 950 mm • Grooving with saw (X direction): 112 – 1,000 mm • Z-axis • Material thickness: 0 – 60 mm • Machine configuration and features • 78 independent drilling spindles in two mirrored machining units: • 39 spindles in the upper unit • 39 spindles in the lower unit • Per machining unit: • 29 vertical drilling spindles (19 along X, 10 along Y, 32 mm spacing) • 8 horizontal drilling spindles along X (4 with dual output) • 2 independent horizontal drilling spindles in X • 2 independent horizontal drilling spindles in Y • 3.5 kW HSK electrospindle, 6,000 – 18,000 rpm • Upper and lower work (pressure) tables • Upper and lower machining units • Electronic thickness control Fpedozt Dbcjpfx Anlsk • Central automatic lubrication • PC-based CNC control (Windows XP 600 with Soft CN) • Safety system Additional equipment • Roller loading table • Right-side belt unloading conveyor

Year of construction: 2014, condition: ready for operation (used), spindle motor power: 4,000 W, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details. • Quantity available: 2 units • Machining type: Drilling and milling • Drilling spindles: 16 total (10 vertical, 6 horizontal) + grooving blade • Maximum workpiece size: X 2500 mm, Y 900 mm • Axis travel speeds: X 25 m/min, Y 50 m/min, Z 25 m/min Fsdpfxszt A Tks Anlepk • Electrical/power: 12 kW installed power; 415 VAC; 21 A

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, overall weight: 1,700 kg, spindle speed (max.): 24,000 rpm, This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine. • Axes: 3 CNC-controlled (X, Y, Z) • Capabilities: routing, drilling, pocketing, panel machining • Air supply: 7.5 bar • Suction air speed: 30 m/s Additional equipment Fjdpfx Aozt A Smsnlepk • Flat vacuum table with suction cups

Condition: ready for operation (used), Year of construction: 2022, number of axes: 4, Bearbeitungsbereich X = 3200 mm Y = 1250 mm BH28 Bohrkopf mit einzeln abrufbaren Spindeln 11 KW Elektrospindel mit HSK-F Adapter mit Achse „C“ Torque Winkelsägeaggregat HSK F63 für Sägeblatt Bohr- und Fräsaggregat für Ober- und Unterkante / Stirnbohr- und Fräsaggregat 8-fach Werkzeugwechselmagazin - Tellerwechsler used Vertical CNC Machining CenterBrand: BiesseType: Brema EKO 2.2Year of manufacture: 2022Technical dataWorking AreaX = 3,200 mmY = 1,250 mmWorkpiece DimensionsLength (X): 200-3,200 mmWidth (Y): 35-1,250 mmThickness (Z): 8-60 mmMaximum workpiece weight: 50 kgWorkpiece Reference SystemThe workpiece is pre-positioned in the longitudinal direction (X-axis) in the loading area on the left-hand side of the machine by means of a fixed reference stop mounted on the machine table.Workpiece Positioning UnitWorkpiece positioning in the X-axis is carried out by two clamping grippers, which securely hold the workpiece during the machining process. Movement is performed by two independently driven servo motors.Workpiece Support SurfaceThe workpiece support surface, where the machining units are located, consists of a series of rubber-coated rollers that establish the workpiece reference in the the opposite side of the machining units, a pressure system ensures optimum workpiece holding throughout the machining process.Transformer and electrical connection for supply voltages of 380-415 V (±10%), 50/60 HzAir conditioning unit for the electrical control cabinetbSolid control systemHP Kit for High-Speed Movement of the Workpiece Clamping GrippersThe combined system, consisting of servo motors and precision planetary gearboxes, enables positioning speeds of up to 110 m/min with rapid acceleration ramps.Foot Pedal for Opening / Closing the Clamping GrippersBH28 Drilling Head with Individually Selectable Spindles- 17 vertical spindles (7 in X-axis, 10 in Y-axis)- 5 horizontal spindles (3 in X-axis, 2 in Y-axis)- 1 grooving saw unit with fixed cutting direction in the X-axis11 kW Electrospindle with HSK-F Tool Interface and C-Axis Torque- 11 kW, 24,000 rpm (S1 continuous-duty operation)- 6,000-24,000 rpm, programmable via NCHSK-F63 Angular Saw Unit- Maximum speed: 8,400 rpmDrilling and Milling Unit for Top and Bottom Edges / End Drilling and Milling Unit- Maximum speed: 9,000 rpm- ER20 collet tool holder8-Position Tool Changer - Disc-Type Tool Magazine"Sensitive Surfaces" Kit for Workpiece TransportLaser Device for Manual QR Code ReadingSOPHIA - IoT ConnectionDowel Insertion Unit for Ø8 × 40 mm Dowels with Glue InjectionBarcode2HOPS with VariablesMultiPost UpgradePOST Element SplitterNC-HOPS 7.0Note:The technical data and descriptions are copies of the order confirmation at the time. The information is for informational purposes only and is not binding. Fodpfxozt Avfe Anlopk

Condition: ready for operation (used), Year of construction: 2021, total width: 5,851 mm, travel distance X-axis: 3,140 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 245 mm, overall weight: 3,000 kg, controller manufacturer: BIESSE, controller model: HH660 PC-based control, spindle motor power: 13,200 W, product length (max.): 7,116 mm, spindle speed (max.): 24,000 rpm, number of axes: 4, This 4-axis BIESSE Rover A 1232 was manufactured in 2021. It features a working area of 3140 mm in the X-axis, 1260 mm in the Y-axis, and a Z-axis travel of 245 mm. The machine is equipped with an electrospindle power of 13.2 kW and a maximum tool diameter of 113 mm. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover A 1232 machine we have for sale. Contact us for further details. • Power supply voltage 400 VAC • Full load current 31.7 A • Number of power supply phases 3 • Installed power 18.66 kW • Frequency 50 Hz • Short circuit protection rating 10 kA RMS Sym • Working area X 3140 mm • Working area Y 1260 mm • Working area Z 245 mm • Max panel thickness: depends on vacuum module height (H74 / H29) and tooling • Workpiece support length 1200 mm • Vacuum pump capacity 90 m³/h • Vacuum pump capacity 108 m³/h at 60 Hz • Vacuum system dry pump • Electrospindle power 13.2 kW • Electrospindle speed 12000 to 15000 rpm S1 Fodpfx Ajzt Au Uonlepk • Electrospindle speed 12000 to 24000 rpm programmable • Tool holder HSK F63 • Rotation clockwise and counterclockwise • Two separate magazines installed: • 8-position tool magazine (rear / Y-axis area) • 13-position tool magazine (main X-axis unit) • Maximum tool diameter 113 mm • Maximum tool length 110 mm • Maximum tool weight 7.5 kg • Maximum total magazine weight 32 kg • Vacuum system:Configurable vacuum pump system. Available configurations include:– 2 × 90 m³/h– 2 × 100 m³/h– 1 × 250 m³/h

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit Fsdezt Auzjpfx Anlspk • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional information • additional refurbished 5-axe main spindel available • 8 horizontal drilling spindles, 12 vertical drilling spindles, and grooving saw out of operation • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) • Worktable: ATS system with modular supports • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) Fpsdjzt Auuspfx Anljk • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) Fodpfx Anozt Argslopk • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: used, Year of construction: 2011, cutting width (max.): 4,300 mm, air demand: 4.45 m³/h, cutting diameter: 75 mm, Biesse Sektor 450 K1 - 4.300 x 4.400mm Description SIZING CENTRE SEKTOR 450 - K1 / 4300 x 4400 Motor 7,5 kW Scoring unit motor 2,2 kW 1+3 tables Speed 1-120 m/min. Automatic board measuring on Manual cuts and, with OSI Plus option, on Sequences programs Push button for remote control start cycle, complete with emergency stop button. Basic electronic label printer Fedpfszqcrzox Anlspk Label printer support stand OS-Labelling - Graphic labeling on the machine with part drawings. QUICK OPTI software for optimization of cutting patterns. On-board version. OSI PLUS interface. Includes: Order management, navigation through tree, advanced simulation, sequence mode, Macro functions for sequences, grooving, function Editor, advanced statistics elaboration, panel and drops stock, technological parameter control system, management of unstrained cuts on the boards. 3 Rounded air cushion unloading table, size 2050 x 620 mm Transfer device for the second air cushion unloading table. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2012, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Klever 1836 G FT CNC machining centre Description (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland Fjdpfx Aszqt Eronlopk

Condition: used, Year of construction: 2001, Equipment: CE marking, Biesse Rover ROVER 24 FT CNC machining centre Description The work surface consists of a grid table consisting of two phenol tables with a size of 1540 x 1250 mm that can be linked. The grid table has a grid of 30 mm and vacuum openings of 9 mm in a grid of 150 mm in the X and Y-richting. The grid table is equipped with 6 pneumatic zero point cams at the rear and 1 on the left and right sides. • The working range of the machine is 3100 x 1300 x 155 mm. (Z-stroke 250 mm ) • The speed on the X-axis is programmable between 0 and 100 m/min. • The speed on the Y-axis is programmable between 0 and 100 m/min. • The speed on the Z axis is programmable between 0 and 15 m/min. • The three axes are driven by brushless digital DC servo motors. CNC numerical control type NC-500 Milling motor with automatic change system with ISO30. The power of this milling motor is 10.5 hp at 24,000 rpm 10-position tool changer that moves with the unit Drilling unit with fourteen independent drill spindles Groove saw Static frequency converter Centralized pneumatic system Centralized lubrication system Vacuum pump with a capacity of 250 m3/hour Two push-button control panels Working pressure for air 6 kg/cm2. Voltage 380 Volt, 50 Hz. Safety mats on the front. CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Fodpfxezqtzto Anlspk Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2008, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Rover ROVER A 3.40 FT K2 CNC machining centre Description Working fields: X = 3685 mm; Y = 1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum tank Vacuum system for 2 300 m3/h pumps Fpedpjzqdqlofx Anlek 300 m3/h rotary claw vacuum pump 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 User-friendly interface BIESSEWORKS - Advanced programming system BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with 2 mats and low fencing CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2010, power: 17.1 kW (23.25 HP), input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,326 mm, travel distance Z-axis: 170 mm, number of axes: 5, number of slots in tool magazine: 33, overall weight: 6,700 kg, Equipment: CE marking, Biesse Rover C 6.50 Config. 3 CNC machining centre 5-Axis Description Numerically controlled machining center ROVER C 6.50 Fpodpfxszqdmae Anlok Working fields - configuration 3 :X = 4600 mm; Y = 1535 mm; Z = 275 mm CE Safety devices 8 ATS panel supports - L = 152 5 mm - 32 sliding bases Automatic positioning of 8 panel supports and sliding bases (EPS X-Y ) Belt conveyor for the removal of chips and off-cuts Pneumatic locking system divided in 2 work areas in X 8 rear reference stops with a stroke of 115 mm 8 Stops with a stroke of 140 mm positioned at 1175 mm (L= 12 80 - 1525 - 1800 mm) 4 Side stops with a stroke of 140 mm (2 Lh + 2 Rh) inclusive of the pneumatic system. 4 removable central stops with a stroke of 140 mm (2 Lh + 2 Rh) incl. of the pneumatic system Sensor for the detection of lowered stops Pneumatic system for lifting bar supports with double pneumatic stroke 6 lifting bar supports with double pneumatic stroke (H=74mm)uniclamps Vacuum system for a 250 m3/h pump 1 x 250 m3/h rotary veins vacuum pump for standard vacuum system Composition C3-A1 Operating unit with 5 interpolating axes Prearrangement for the assembly of chip deflectors with pneumatic or inductive sensor on a 5-axes operating unit Composition C3-P2 Chain tool changer with 33 places at 120 mm center distance Iron gripper on chain toolchanger for chip deflector compatible with 5-axes electrospindle RH Chip deflector for 5-axes operating unit Liquid cooling unit for liquid cooled systems Automatic lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Fjdpfozp Hbqjx Anljpk Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2014, cutting width (max.): 4,300 mm, air demand: 4.45 m³/h, cutting diameter: 75 mm, Biesse Sektor 450 K1 - 4.300 x 4.400mm Description SIZING CENTRE SEKTOR 450 - K1 / 4300 x 4400 Motor 7,5 kW Scoring unit motor 2,2 kW 1+3 tables Speed 1-120 m/min. Additional pneumatic gripper in position 570 mm Additional pneumatic gripper in position 1740 mm Automatic board measuring on Manual cuts and, with OSI Plus option, on Sequences programs Push button for remote control start cycle, complete with emergency stop button. Twin Pusher 1.2 system. QUICK OPTI software for optimization of cutting patterns. On-board version. Fpsdpfx Anjznw Tbelok OSI PLUS interface. Includes: Order management, navigation through tree, advanced simulation, sequence mode, Macro functions for sequences, grooving, function Editor, advanced statistics elaboration, panel and drops stock, technological parameter control system, management of unstrained cuts on the boards. 1 AC100161 Piano a velo d'aria 2050 x 620 mm con profilo arrotondato lato squadro 3 Rounded air cushion unloading table, size 2050 x 620 mm Transfer device for the second air cushion unloading table. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 4: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5 Fpsdpfx Ajwuz Rtsnljk

Condition: excellent (used), Year of construction: 2009, Used CNC machine Model: BIESSE Rover A3.30 Year of manufacture: 2009 Good condition, inspection possible at our location in the Netherlands. Availability: approximately end of October 2026 4-axis CNC machine with traversing table Drilling head BiesseWorks software Working area: 3100 x 1250 mm Fodoztyzxopfx Anlspk Sold without tools.

Condition: used, Pressure gauge BIESSE 2424A0007. Fpedpfx Ajzrxnnjnlek