Used Biesse Akron 435 for sale (311)

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 Nsdpsxzb Iisfx Ad Hswp For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: excellent (used), Year of construction: 2019, BIESSE AKRON 1440 Airforce system Nodpjv A H Ubofx Ad Howp (return system is not included) - Year 2019 - good condition - NC motors, all adjustable from PC control - Premilling • top pressure with belt instead of rollers • Auto infeed edge • Riepe release nebulizer • Glue pot • Air force system • Scissors • Pressure zone 3 rollers • Riepe antistatic nebulizer • Double saw unit 0-15° • Riepe lubricant nebulizer for delicate edges • Double motor corner rounding unit • Riepe cleaning nebulizer • Edge scraping unit • Glue scraping

Condition: used, Year of construction: 2018, functionality: fully functional, Biesse Akron 1400 Edgebander. Genuine UK Machine available for demonstration: £10,000 + VAT This machine is suited for flush or bevel trimming of edgebanding materials upto 8mm thick (Max 3mm on the coil). Currently the machine is fitted with Straight cutters, but combination cutters can be fitted for radius trimming. This machine DOES NOT do corner rounding. But does have the following units: - Pre-Milling. EVA Hot Melt Gluing System. End Snipping Saws (Straight or Chamfer cut). Rough Trim (Top & Bottom). Fine Trim (Top & Bottom). Nwsdpoxrwm Nsfx Ad Hsp Glue line scraping (Top & Bottom).

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Nwedpow Tivmofx Ad Hop Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 9 nr

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 1000063009, edge thickness (max.): 5 mm, transport length: 3,800 mm, transport width: 700 mm, transport height: 1,700 mm, TECHNICAL DETAILS Number of units: 5 Nwodpfx Asw Tzifod Hop Max. edge band thickness: 5 mm Max. panel thickness: 50 mm MACHINE DETAILS Documentation available: No CE marking present: Yes Serial number: 1000063009 Voltage: 400 V Current consumption: 12.3 A Power: 6.8 kW Transport dimensions: 3,800 mm x 700 mm x 1,700 mm (L x W x H) Transport weight: 1,000 kg Number of transport packages: 1

Condition: good (used), Code: 0680 Brand: BIESSE Model: AKRON 430/AT - CE Standard Automatic edge bander with grinding unit for edgebanding solid wood, chipboard, veneer, Pvc, Abs and melamine panels - CE Standard - Year 2009 Technical data: Panel height mm 10/60 Edge thickness max mm 10 Panel length min mm 140 Panel width min mm 85 Belt feed speed 12 mt/min Electronic control panel with USB port for data loading - Sintra software Grinding unit for panel grinding -N° 2 motors each Hp 2,4 rpm 12000 Tools diameter mm 80 F30 H75 Slide copying devices N° 2 suction nozzles diameter mm 60 Gluing unit Interchangeable glue pot Glue pot capacity kg 2 Glue spreader roller diameter mm 25 Pressure roller conveyor large roller diameter 100 mm Pressure roller conveyor small rollers diameter mm 80 End cutting unit: for cutting excess front and rear edges N° 2 motors each Hp 1,07 12000 rpm Motor inclination 0-15 degrees Max tooling mm 140 Slide copying devices N° 2 suction nozzles diameter mm 80 Finishing trimming unit for chamfering the excess edge in the top and bottom corners of the panel N° 2 motors each 0,87 Hp 12000 rpm Motor inclination from 0 to 25 degrees Nwodoxn Nwrspfx Ad Hsp Tool diameter 70 mm F16 height 20 mm Vertical and frontal copying devices with rotating discs Height adjustment: automatic with the upper pressure unit N° 2 suction nozzles diameter mm 80 Edge scraper unit for edge finishing in Abs Radial plate tool Vertical and frontal copyng devices with rotating discs N° 2 suction nozzles diameter mm 60 Glue scraper unit for removing glue residues Vertical copying devices with rotating discs N° 2 suction nozzles diameter mm 60 Removable support for panel support N° 5 suction nozzles diameter 100 mm Compressed air bar 7 Overall dimensions mm 3900 x 1000 x 1600 h Weight kg 1530

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 Njdpjgipk Aefx Ad Hewp min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: as good as new (ex-display), Year of construction: 2023, 0,4 - 5 mm Nwodpsxh Spksfx Ad Hsp Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min.

Condition: excellent (used), Year of construction: 2009, I sell the edge banding machine BIESSE Akron 425 A-R Year 2009 Configuration: Edge height 8 - 65 mm Edge thickness 0,4 - 8 (12) mm Edge banding, Nwodpfx Adsiu U Sws Hep End cutting saws pneumatic adjustable Tilting milling Radius scrapers R2 Polishing brushes Hot-air blower TOP condition, possible to test !

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Njdpfx Aew Tq Iwed Hjwp Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A

Condition: good (used), Code: 0186 Brand: BIESSE ARTECH Model: AKRON 420 - CE Standard Automatic edge bander for wood, Pvc, Abs, and melamine edges for carpentry, furniture, kitchens, custom-made furnishings, panels and various - CE Standard Technical data: Nwedpjw D E Diefx Ad Hsp Panel height 10-60 mm Min/max edge thickness 0,4-6 mm Minimum panel length 140 mm Minimum panel width 50 mm Track feed speed 12 mt/min Protective cabin Composition: Gluing unit: Glue tank capacity 2 kg - Shear for 3 mm roll edges End tcutting unit: n° 2 independent high-frequency motors 0,5 Kw - Inclination from 0 to 15° Tilting fine finishing unit: 2 independent high-frequency motors 0,65 Kw , tiltable from 0 to 25° Brush unit: Brush diameter mm 150 - Motors Kw 0,37 each Suction port diameter mm 150 Compressed air 7 bar Overall dimensions mm 3200 x 1000 x 1500 h Weight kg 900

Condition: new, Year of construction: 2023, 0,4 - 5 mm Nodpfx Adsxh Spds Hjwp Workingpiece thickness from to 10 - 60 mm Feed speed 12 m/min.

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Nodpfx Aswkf Dvod Hswp Corner Rounding Unit: yes Operating Units: 7 nr

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Nwodpfewuz Npex Ad Hjp Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Nsdpfx Adow Idc Do Hewp Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 12 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B AIRTEC Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B AIRTEC Njdpfx Aowukywsd Hswp

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Nodpowuz Niefx Ad Howp Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Nsdpfexw T Tpsx Ad Hewp Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, TECHNICAL DETAILS Travel range X-axis: 3,400 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 155 mm Number of work zones: 2 Drilling Head Vertical spindles X-axis: 10 Vertical spindles Y-axis: 12 Horizontal spindles X-axis: 6 Horizontal spindles Y-axis: 2 MACHINE DETAILS Electrical Data Power: 20 kW Voltage: 380 V Current: 25 A Frequency: 50 Hz EQUIPMENT Vertical electrospindle with C-axis vector, automatic tool changer, ISO 30 taper Automatic tool change system with 3 side-mounted positions for aggregates Nwjdpfsxx Rz Tox Ad Hop Automatic tool change system with 20 positions and chain 8 manually adjustable bars for suction cup holders with display 3 manually adjustable suction cups per bar 8 pneumatically actuated Bakelite bars for panel lifting Perimeter safety fence Motorized conveyor belt for chip extraction Vacuum pump

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit Nodpou Hldmofx Ad Howp " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT - NBC 412 Automated nesting cell Description: Rover A 3.40 FT Centralized automatic lubrication system 8 front stops + 8 back stops with sensors 1 Rh side stop with sensor Vacuum system for 2 300 m3/h pumps 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Boring head BH 18 A Revolver tool changer with 10 positions Numerical Control XP600 Nedewh Sfzjpfx Ad Hswp BiesseWorks - Advanced - machine and office version BIESSE NEST Module Arm for pieces loading and unloading, positioned on the machine beam Loading and unloading table, positioned on the LH side of the machining center CE Safety devices Rotary claw vacuum pump Mechanical presser ring with pneumatic lowering , for nesting based application (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2009, MC HSK 63 F angle unit for angled drilling below 7 degrees Excellent condition See photos Location: from stock, 54634 Bitburg Nodpfewmr Uyex Ad Hswp - available immediately -

Condition: used, Year of construction: 2010, Biesse Rover A 3.40 FT K2 Description: Working fields: X = 3685 mm; Y = 1290 mm; Z = 160 mm Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. Nwjdoxwcb Nspfx Ad Hsp 4 side stops equipped with pneumatic system and sensors. Vacuum tank 300 m3/h rotary claw vacuum pump12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS - Advanced programming system - machine version BIESSE NEST Module Air conditioner for electric cabinet Inverter Safety devices with mats Prearrangement for mechanical copying unit (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2009, Manufacturer BIESSE Model UNICLAMP Machine type: Mechanical clamping system Year of manufacture: 2009 Item number: 7350171 Technical specifications Quantity: 5 Clamping height: 15 - 55 Height: 48 mm, with quick-release coupling Nwodpfx Aewmr Tved Hjp Suitable for Biesse Additional information * Sales unit includes 5 used Uniclamp clamping elements * Clamping elements for clamping strips, suitable for Biesse console tables with ATS Location: From stock, 54634 Bitburg - Available immediately -

Condition: excellent (used), Year of construction: 2009, MC Biesse HSK 63 F angle unit with 2 outputs Instructions Wrench Collet Location: from stock, 54634 Bitburg - available immediately - Njdpfx Aswmtaqed Hswp