Machining center

Biesse Rover A 2231 GFT

Condition: used, machine/vehicle number: 008377, X axis working area: 3390 mm Y axis working area: 1570 mm Working Table: Pod and Rail Bdsdpox Swb Aefx Al Uog Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 10

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Bodpfjw S Tyajx Al Ujdg

Condition: good (used), Year of construction: 2020, Masterwood Project 351 L 3-Axis CNC machine Description Aircooled 3-axis milling motor 17,5HP (HSK-63F) Static frequency inverter for programming speed 1.500-24.000 t.p.m. Toolchanger with 22 positions 6 pneumatic countersinkable panel guides for loading/positioning heavy parts Prepared for install. clamps 2 horizontal clamps for beamwood 6 zero points over X-axis (positioning of panels at backside of the supports 8 zero points over X-axis (positioning of panels half-way the supports) Full reference at rightside over Y-axis Full reference at leftside over Y-Axis 2 workingfields 1 x 100m³ vacuumpump 24 vacuumcups Remote control with digital read-out Auto tool measuring system Transport waste belt Drill unit with 19 spindles (32mm center distance) 2,2kW - 7 vertical drillspindles in X-direction - 6 vertical drillspindles in Y-direction - 4 horizontal drillspindles in Y-direction - 2 horizontal drillspindles in X-direction (all drill spindles independently programmable) Control unit with PC SINCRO Software CAD/CAM MASTERWORK Technical specifiactions Working range in X - 5.130mm Bdedpfx Ajvu U Itol Usg Working range in Y - 1.550mm Speed in X-Y 80 mtr./min. Speed in Z 25 mtr./min. Max. workpiece thickness 200mm Milling motor power 17,5 HP (S1) RPM milling motor 1.500 - 24.000 Drill unit 3HP Toolholdersystem HSK63-F Toolchanger 22 positions Vacuumpump 100m³ Dustextraction 250mm Aircapacity 4.500m³/h Airspeed 30 mtr./sec. Compressed air 7 bar Compressed air consumption 300-500ltr./min. Fuse value 40 Amp. Weigth 7.000kg (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Bdsdpfx Asvwbp Ael Usg

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm Bdedpoiidm Nefx Al Usg The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: LC594, Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavitiesPreform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACILabeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fedShrink wrapper: Acmi Fenix, film-only configurationHandle applicator: Smipack HA 35-50-70Palletizer: Alsim Valiant 1I 1P, fully automatic, push-typePallet wrapper: PM Pragometal OBS Rotomatic StandardAdvanced Automation & Control SystemsThe line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments.Production Line Integration CapabilitiesDesigned for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish.Machine Condition & Maintenance HistoryThis second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production.Operational Performance & VersatilityOptimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label appli... Bdsdpfjydn A Hsx Al Usg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - 5-axis spindle DRIVE 5C+ 15kW Bjdsw Dv Hzspfx Al Usdg - Working area: 4200x1550mm - Tool magazine: 14 positions - Drills: 9x vertical, 2+2 horizontal - Chip conveyor - WoodWOP 6.1

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Bdsdpfx Aljylp Sle Uog Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, Maximum swing range (vertical axis of the electric spindle): 1650 – 2350 – 3000 mm Vector speed (X-Y) (PRO-SPEED): 85 m/min Programmable speed in Z-axis: 30 m/min Bdodpeyffh Nsfx Al Ueg Element passage: 170 mm Multifunction device BRC-K: Technical specifications (Gr-Multif_BRC-K_2.1_N5.1-0.6) 1) Performance: Motor 3.6 kW (S6 - 40%) Number of poles: 2 Speed control: via CNC with frequency inverter Cooling system with fan 3) Horizontal milling spindle: Tool holder: ER25 Spindle speed: 6000–18000 rpm Rotation direction: clockwise/counterclockwise Max. tool dimensions: L1 = 151 mm / W1 = 120 mm / D = 20 mm Max. tool dimensions 2: L2 = 111 mm / W2 = 80 mm / D = 20 mm Max. machining depth: 115–75 mm

Condition: used, Year of construction: 2006, Numerical Control XP 600 Working range on X-axis mm 3060 Working range on Y axis mm 1140 Working range in Z axis mm 160 N ° 2 work fields Bar worktop No. 6 adjustable bars for suction cup support No. of pneumatic bakelite bars for panel lifting (?) No. 2 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis 12 kW motor 10-position tool change system - positioned on the drilling head of the machine, ISO 30 type cones BH19L drilling head with 18 spindles arranged as follows: - No. 7 verticals on X axis - N° 6 verticals in Y axis - N° 4 horizontal on X axis - No. 2 horizontals on Y axis - No. 1 independent blade group for making grooves on the X axis Front protection and safety system with photocells Automatic lubrication system (?) Air conditioning system for cooling and cleaning of machine control Vacuum pump mc/h 250 TECHNICAL DETAILS TO BE CHECKED Bdjdov Aacfepfx Al Ujg