Used Biscuit Line for sale (15,570)

Year of construction: 2025, condition: new, functionality: fully functional, Dishwasher pot washer Model: S Line 1715 AP Quick Ready System Soft-touch operation with color display Universal dishwasher 3 liters of fresh water consumption 9 wash programs (2 to 12 min) Rinse aid and detergent dosing pump Basket dimensions: 550 x 610 x 850 mm, WxDx insertion height DGUV V3 tested drain/drain pump Connection: 400 V, 10.5 kW, 32A-CEE plug Dimensions: 719 x 802 x 1930 mm, WxDxH Cjdpfx Adom Tr Hdsaeri NEW machine with 12 months warranty and 12 months on parts Accessories included: 1 universal basket inlet and outlet hoses We have a TOP selection of bakery machines!

Condition: used, Year of construction: 2002, Overview This PET filling line was manufactured in 2002 by Krones (Germany). The line is designed for carbonated beverages such as beer or lemonades, and also suitable for water with or without CO₂. With an output capacity of up to 12,000 bph (0.5 L), it offers a complete solution from bottle blowing to palletizing. The line is being sold due to modernization of the PET division and replacement with a higher-capacity system. Equipment is in good condition and still fully operational. Technical data  Line capacity: 12,000 bph at 0.5 L 9,000 bph at 1.0 L 8,000 bph at 1.5 L 6,000 bph at 2.0 L Formats: 0.5 L, 1.0 L, 1.5 L, 2.0 L Neck finish: PCO 1810 Max. bottle diameter: 106 mm Products: Beer (+4 °C), Kvass and lemonades (+10 °C), still and carbonated water Labelling: Wrap-around, pre-cut paper labels, hot-melt Secondary packaging: Film only (4×3 and 3×2) PLC: Siemens S7-300 Power supply: 400 V, 3PH, 50 Hz, TN-S Scope of Delivery Blowing machine | Krones | Contiform S8 | 2002 | Incl. preform feeding, chiller, box titling unit Rinser | Krones | Variojet | 2002 | Rotary Filler | Krones | Mecafill | 2002 | Rotary, isobaric filler for CSD and beer Labeller | Krones | SV 360-10-113 | 2002 | Rotary Labeller | Krones | Canmatic 600-10 | 2002 | Rotary, hot-melt Packer | Krones | Variopac FS-45 | 2002 | Film packer, 4×3 / 3×2 formats Palletizer | Krones | Pressant Compact 1N | 2002 Stretch wrapper | Robopac | Rotoplat | 2002 Air conveyor | Krones | Airco S | 2002 | For blown PET bottles Bottle conveyor | Krones | Synco S | 2002 | For filled and labelled bottles Pack conveyor | Krones | Multico S | 2002 | For product packs Pallet conveyor | Krones | — | 2002 | For pallet transport Peripheral equipment | Krones | — | 2002 | Cap feeding system, hopper, valve manifold Crsdoxhf Hiopfx Adaoi

Condition: used, operating hours: 1,000 h, Used Filling Line Doypack / Tetra Pak 600 kg/h Technical Configuration of the Filling Line The Used Filling Line Doypack / Tetra Pak 600 kg/h includes a sequence of machines from 2015 that deliver precision, hygiene, and reliability in filling flexible pouches. Initially, the process starts with product preparation and feeding, ensuring uniform consistency and stability before filling. Subsequently, an FL Tecnics machine—model FL 2.2—handles pouch feeding, weight-based filling, sealing, and packaging. In particular, a VARPE control system measures product weight in each pouch with high precision, thus minimizing variation and waste. At the same time, another VARPE unit performs X-ray inspection, which detects any contaminants or structural issues. Consequently, this adds a critical layer of safety and quality control. Meanwhile, a spiral air-flow pasteurizer manufactured by SARP performs the pasteurization phase. Unlike other systems, this design treats the product uniformly while preserving its sensory characteristics. Finally, a case packer completes the packaging process, efficiently organizing and preparing the filled pouches for shipment. Taken together, these components enable the Used Filling Line Doypack / Tetra Pak 600 kg/h to deliver a safe, consistent, and high-performance packaging operation. Production Performance and Operating Condition Cedsvguc Uopfx Adaori The Used Filling Line Doypack / Tetra Pak 600 kg/h processes up to 600 kilograms of product per hour. Thanks to its engineering, it maintains consistent dosing and minimizes downtime. Its weight-based filling system ensures accurate volumes in each pouch, thereby reducing overfill and adhering to production specifications. Notably, the line has only operated for about 1,000 hours, during which it produced around 5 million pouches. Given this, the system remains in near-new condition. Therefore, facilities can expect long-term reliability with minimal wear. In terms of maintenance, this translates to reduced operational costs and higher uptime. Versatility in Product Type and Formats The used Doypack/Tetra Pak filling line works with pouch sizes from 90 grams to 150 grams, using weight-based precision filling.. Due to this, operators can process a wide variety of products, including baby food, ready-to-drink beverages, dairy items, sauces, and creams. More importantly, technicians can easily adjust dosing parameters to suit different product viscosities or packaging standards. Accordingly, this system provides high flexibility for companies handling multiple product lines. Furthermore, weight-based filling enhances yield accuracy, which helps manufacturers meet labeling and legal compliance requirements. Operational Safety and Technical Documentation Each machine in the Used Filling Line Doypack / Tetra Pak includes integrated safety features that meet European standards.

Year of construction: 1999, condition: used, machine/vehicle number: 6572818, Jogger Serial Number: 6572818 Codpfx Adjg Stkloasri 800 x 1340 mm

Condition: ready for operation (used), Year of construction: 2010, A complete IWK tube filling line is available. 1) Tube filling machine IWK TFS 80-1, year of manufacture: 2010, packaging material: aluminum/PE/PP/PVC/PE laminate/aluminum laminate, tube shape: round/conical, max. plastic tube diameter: 60mm, max. aluminum tube diameter: 50mm, tube length min./max.: 50mm/250mm, max. filling volume: 400ml, max. filling temperature: 65°C, max. product viscosity: 20000mPa/s, max. product density: 1.6g/cm³, max. filling capacity: 100tubes/min, weight: approx. 2400kg, operating hours: 30145h. 2) Tube feeding unit IWK TZ 204, max. tube diameter: 60mm, max. total tube length: 235mm, max. carton dimensions X/Y/Z: 600mm/650mm/265mm, max. output capacity: 22tube rows/min, weight: approx. 850kg. 3) Checkweigher Mettler Toledo XE2, year of manufacture: 2024, weighing range: 7g-100g, throughput: 100pieces/min. Documentation available. On-site inspection possible. Cjdpfoxr Nv Nox Adaeri

Condition: used, Year of construction: 1995, material width 650 mm coil weight 7,5 t material thickness 0,6 - 4,0 mm coil internal diameter 460 - 530 (630) mm coil external diameter 1300 mm material cross-cut 1300 mm² no. of straightening rolls 9 straightening roll diameter 60 mm speed 1 - 30 m/min power requirement 30,0 kW Straightening machine KOHLER 50.650/9 Crsdpfx Ajv Ehaqsdaji with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard

Year of construction: 2001, condition: ready for operation (used), This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information. Application Types Codpfxjxnr Hps Adaori Complete Production

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA Credpfx Aou Rda Iedasi - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: used, mileage: 139,200 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 09/2021, emission class: euro6, energy efficiency: C, color: silver, suspension: steel, number of seats: 5, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill start assist, LP3 Interior lighting package, Z3N Night package, Q50 Detachable tow bar, JP4 Lane tracking package, JA7 Blind spot assist, FB4 AMG spoiler lip on the tailgate, EY5 Mercedes-Benz emergency call system, BS1 Brake callipers with Mercedes-Benz lettering, EY6 Breakdown management, G43 9G-TRONIC, CM2 Bumpers and attachments painted in body color, FS5 Illuminated mirrors for sun visors, FK4 Radiator grille painted black, FC1 Electronic key in chrome look, JK5 Instrument cluster with color display, LG2 LED Intelligent Light System, LG4 Tail, brake and indicator lights in LED technology, RK1 Tires 245/45 R19, RK4 AMG light alloy wheels 8 J x 19‚ High-sheen finish, LG8 High Beam Assistant PLUS, EZ5 Parking Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, EZ8 PARKTRONIC, SE5 Lumbar support driver's seat, SE4 Lumbar support front passenger seat, QA4 Trailer load 2500 kg, CN1 Exterior sills, T70 Child safety locks on doors in passenger compartment, ZC6 Sales code 1, T74 Grab handle for entry, HH4 THERMOTRONIC automatic climate control, UR1 Seat rail system with quick release, V36 Roof lining, E1D Digital radio (DAB), Y10 First aid kit, MJ8 ECO start-stop function, IB6 Series C447 Vito/V-Class, ES3 12V sockets for rear seat rows right and left, ES2 12V socket trunk/loading area, F3S Exterior mirrors painted black, VD7 Interior roof liner black, E1T Touchpad, H00 warm air duct to the passenger compartment, MS1 cruise control, F48 heated windshield washer system, IK3 luxury station wagon, HI1 climate zone 1 (cold/comfort), V41 TPO plastic flooring in the passenger compartment, US3 3-seater bench seat as a comfortable bed in the 2nd rear row, W64 separately opening rear window, V44 carpeting in the front interior. We can be reached by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! More:!! ... Cedewlz U Hepfx Adajri

Condition: used, Year of construction: 1997, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Mazatrol, controller model: M-Plus, overall weight: 36,000 kg, tool weight: 2,200 g, CNC Horizontal Machining Centre with Palletech Table size 800 x 800 mm. Crodpfx Aexd Arujdasi Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2018, A complete Berning sleeve packaging line for the automated labeling and packaging of bottles or cups in shrink sleeves is available. 1) Berning Maschinenbau sleeve machine, year of manufacture: 2018, cycle rate: 100cycles/min, max. product passage height: 320mm, product width range: 10mm–190mm, operating hours: approx. 3562h. 2) Franz Tölke bottle unscrambler, year of manufacture: 2018, output capacity: 240pieces/min. Includes aligner and cup inserter. 3) Ropack counting unit with automatic carton changer. Documentation available. An on-site inspection is possible. Crodpfx Adjxr Nv Ajaei

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 Csdpfx Adsvuuduoasri roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: excellent (used), Year of construction: 2018, Ref: 10985 . 2018 Horizon BQ-480 PUR / EVA + Inline HT-1000 Trimmer Dual glue late model line in excellent condition! Only 3.5m books produced! Comprising: BQ-480 binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction EVA / PUR roller type spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Auto suction cover feeder with scoring and double sheet detection Auto calliper book measuring device, for quicker make-ready Improved delivery table for gentle handling of thicker or PUR bound books. Codjwzkhhjpfx Adaori Conveyor system to; HT-1000V Automatic three knife trimmer Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Including accessories, tools & manuals. Binder specification: Book size, Max: 320 x 320 mm / Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm / Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr. Trimmer specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Crsdpfx Asu Tg I Dedaei Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: diverse, travel distance X-axis: 700 mm, travel distance Z-axis: 375 mm, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, mount diameter: 30 mm, turning diameter: 100 mm, chuck outer diameter: 160 mm, turning height: 150 mm, Equipment: documentation/manual, Linked EMAG machining line for spur gears / planetary gears / gears. Highly productive manufacturing line for planetary gears, including integrated automation with raw part storage, marking unit, basket stacking cell for finished parts, and a complete dry-production process. Comprising: - 1x EMAG raw part storage (stacker) - 2x EMAG vertical single-spindle turning centers VLC 100 (Siemens 840 Dsl) - 1x EMAG-KOEPFER vertical hobbing machine VLC 200 H (Siemens 840 Dsl) - 1x EMAG-KOEPFER vertical chamfering machine VLC 100 C, press deburring (Siemens 840 Dsl) - 1x EMAG "TRACKMOTION" internal automation with two carriages (Translift) and dedicated control system, operated via mobile HT8 handheld, for component feeding and transport in the automation aisle between stations (with integrated turning unit) and part removal - O-band automation for up to 24 pallets at each EMAG machining station, enabling optional independent automated operation for each machine - 1x part marking station (MARKATOR scribe marker) - 1x EKF automation (gantry) for part handling between EMAG TRACKMOTION, marking station, and stacking cell - 1x EKF basket stacking cell as finished part buffer with 3 basket stacks, uninterrupted operation even during basket stack changes Turning centers with 12-position VDI30 turret, sister tool management, tool life monitoring, integrated probe for dimensional control. Crjdpfx Adek Aacajaji Dismantling and loading of the machining centers is the responsibility of the buyer. A powered inspection by appointment is possible. Price/Details on request Sale only within EU countries All technical details are subject to error/typo.

Condition: used, Year of construction: 2005, sheet thickness steel (max.): 4 mm, sheet thickness (max.): 4 mm, product height (max.): 4 mm, coil width: 500 mm, load capacity: 10,500 kg, product width (max.): 500 mm, controller manufacturer: SIEMENS, controller model: S7 300, CONTROLS .. PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 500 mm .. sheet thickness max.: 4 mm .. coil weight max.: 10.5 to .. feedstock transport direction: right to left COIL CHAIR .. coil weight max.: 10.5 to .. stroke: 750 mm DECOILER .. design: single reel .. sheet width max.: 500 mm .. sheet width (min): 150 mm .. coil weight max.: 10.5 to Cedsxqw Nnepfx Adasri .. max. diameter of coil: 2020 mm .. mandrel expansion range from: 470 mm .. mandrel expansion range up to: 530 mm .. feed velocity max.: 20 m/min LEVELLER UNIT .. sheet width max.: 500 mm .. sheet width (min): 150 mm .. sheet thickness max.: 4 mm .. sheet thickness min.: 2 mm .. number of leveller rolls: 9 .. diameter of leveller rolls: 56 mm .. diameter of feed rolls: 150 mm .. feed velocity min.: 1 m/min .. feed velocity max.: 20 m/min CUT-TO LENGTH SHEAR .. sheet width max.: 530 mm .. sheet thickness max.: 4 mm Cut-To-Length line consisting of: - Coil loading chair HUBTEX - ARKU single-sided decoiler - ARKU VRM 5050/9 feed straightening machine, +- 0.1 mm feeding precision - measuring wheel to verify feed length - Cut-to-length shear Huttenlocher & Schäfer HSK/S year of construction 2017

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  Capacity: max. 1,500 bph (1,000 bph were actually run)  Bottled product: Beer   Included formats: 0.33l longneck, 0.5l NRW  Closure: Crown cap  Scope of delivery  Bottle washer | SEN | 1989 (overhauled and installed in 2020)  Isobaric filler block | Shandong Yuesheng | 2019   Rinsing positions: 14   Filling positions: 12   Capping positions: 5   With pre-evacuation   Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  Dry tunnel | Shandong Yuesheng | 2019  Labeler incl. laser printer   Collecting table   Cedpfxsxgfr Nj Adaeri

Condition: used, Year of construction: 2000, material width 600 mm coil weight 5,0 t material thickness 0,5 - 5,0 mm coil internal diameter 360 - 660 mm coil external diameter 1500 mm no. of straightening rolls 9 straightening roll diameter 80 mm number of draw-in rolls 2 material cross-cut 1500 mm² material thickness at 600 mm material width 2,5 mm material thickness at 300 mm material width 5,0 mm power requirement 15,0 kW weight of the feeder-straightener 2,5 t weight of the decoiler 1,6 t dimensions of the feeder-straightener 1,7 x 1,7 x 2,6 m dimensions of the decoiler 1,8 x 2,0 x 2,3 m Crjdpfjvut S Rjx Adaji Feeder-straightening machine VCRL 650, yom 1994, General overhaul 2001 with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, pneumatic intermittent lifting Decoiler SM 5000, yom 2000 with auxiliary drive, hydraulic expansion, hydraulic snubber roll. loop control via contact plate as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: good (used), Compressed Air Line / Pressure Air Line Crsdpfx Adsvv Nvneaoi made of aluminium The stated price is for all compressed air pipes together. Total: approx. 325 m of pipe Sale / delivery of partial quantities is possible!

Condition: used, Technical data turn table wrapping line with top sheet despenser for fully automatic, watertight packaging of palletised goods Manufacturer UNITECH S.r.l., Via Buscaglia, 10 - 27029 VIGEVANO, Italia Typ UNIWRAP 200 AE Year of construction 2007 Throughput capacity approx. 30 pallets per hour Connected load 7,5 kW Weight 3,700 kg Stretch films, roll diameter 300 mm Roll height 500 up to 750 mm Core diameter 76 mm Film thickness 15 to 35 micron Roll weight 25 kg Top cover PE film, roll diameter 250 mm Core diameter 76 mm PE film roll width max. 1,700 mm PE film thickness 60 to 100 micron PLC Siemens Simatic S7-200 PLC panel Siemens OP 77A Installation dimensions Wrappinmg unit 3,400 x 3,100 x 3,900 mm (l x w x h) Crjdpou Tg Nnsfx Adasi Dimensions roller conveyor 10,000 x 1,150 x 570 mm (l x w x h) Descreption: The Uniwrap 200 AE is a robust build stretch wrapping machine made of high quality components delivering reliability in the long term, which minimises maintenance costs. The use of the latest technologies provide total control over the pressure applied by the stretch film over the product, the pre-stretch ratio and the packaging overall holding force. The Uniwrap 200 AE includes a top-sheet applicator, programmable to client's requirements. Condition: The entire stretch wrapping line is still assembled, in really good condition, ready for immediate operation and can be inspected in operation on site. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 8,290 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, wheelbase: 3,200 mm, overall weight: 3,500 kg, empty load weight: 2,635 kg, maximum load weight: 865 kg, first registration: 03/2024, color: black, suspension: other, number of seats: 7, total length: 5,140 mm, fuel: electricity, Equipment: air conditioning, airbag, car registration, central locking, cruise control, immobilizer system, navigation system, onboard computer, sliding door, Interior trim, twin sliding door(s), disc brakes, touchscreen, electric, lumbar support, clock & tachometer, auto-dimming exterior mirrors, 360-degree camera, heat-insulating glass, metallic paint, 4-door, CarGarantie, front-wheel drive, one owner, emergency kit, glare-free high beam, battery purchased, reversing camera, black, passenger airbag, front window/head airbags, 8 airbags, sliding door right, sliding door left, color monitor for navigation system, front parking sensors, rear parking sensors, parking assist, parking camera, electric window regulators, seat heating, radio/MP3, outside temperature display, heated exterior mirrors, automatic dimming interior mirror, power steering, electric exterior mirrors, brake assist, speed limiter, adaptive cruise control, comfort seats, third brake light, center armrest, German specification, new general and emissions inspection (HU/AU), further features available, subject to prior sale and errors excepted, new HU/AU, trade-in possible, leasing and financing available—please contact us for a tailored offer. 60-month Junge Sterne (young stars) warranty, promotion valid until 30.11.2025 subject to early budget exhaustion. "The vehicle comes with a battery certificate." BA3 Active Brake Assist, BH1 HOLD function, C70 Pedestrian Protection, C74 Illuminated Mercedes-Benz entry sills, CF9 Basic Suspension Plus, CL1 Height- and reach-adjustable steering wheel, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, D14 Anodized roof rails, E07 Hill-start assist, E1D Digital radio (DAB), E1E Navigation, E1F 26 cm (10.25") display diagonal, E1T Touchpad, E6M MBUX multimedia system Mid, E7L AC charging 11 kW / DC charging 110 kW, E7T High-voltage battery (90 kWh), E9L Mode 3 charging cable (Type 2, 3x32A) 8m, ED4 AGM battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12V socket in trunk/cargo area, ET4 Active Distance Assist DISTRONIC, EX8 Navigation Plus, EX9 3 years free map updates, EY5 Mercedes-Benz emergency call system, EY... Crjdpfx Aoxqnzzodasi

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Storage location: Customer Crjdpfx Adevvi Tyoasi

Condition: used, !!! Attention: Only the conveyor system is offered here !!! Available for sale is a floor conveyor system for a wheel rim coating line. The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight rails) - Carriages with mounts for automotive rims - Rotating rail: the rim rotates on this rail during the coating process to ensure even paint application Total length approximately 150 meters Maximum part size: 550 mm diameter Credpfx Adsxfzuqjaji Maximum part height: 400 mm The system is suitable for both wet paint and powder coating processes. No control unit is included with the system. The system has been dismantled and packed in crates. Inspection is possible by appointment. The system must be serviced before being put into operation. Two additional systems are also available. These are suitable for baking/curing in an oven.

Condition: used, Year of construction: 1994, material width 650 mm coil weight 3,5 t material thickness 0,8 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of inlet rolls 4 coil internal diameter 460 - 530 mm coil external diameter 1400 mm weight straightener 1,0 t weight decoiler 0,9 t dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m Crodpfx Adevut Sdeaoi Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic

Condition: used, Year of construction: 2005, *available from around mid 2025* Unimat 23 E: Working width (with a cutting circle of 140 mm): 20 - 230 mm Working height (with a cutting circle of 163 mm): 8 - 120 mm 1st spindle, lower horizontal spindle: 7.5 kW 2nd spindle, right vertical spindle: 11 kW (together with the left vertical spindle) 3rd spindle, left vertical spindle 4th spindle, upper horizontal spindle: 7.5 kW Spindle diameter each: 50 mm Speed each: 8,000 rpm Feed system: 4 kW Mechanical feed, continuously variable: 5-24 m/min. Work table 2.5 m long (including jointing ruler) Uniplan 23: Max. working width: 230 mm Min. working height: 15 mm / max.: 120 mm Feed: 3 kW Horizontal spindles 5.5 kW each Feed speed, continuously variable: 6 – 36 m/min Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool cutting radius: 163 mm Fixed bottom chip removal: 0.5 mm Short parts package for min. wood length: 280 mm Mechanical spindle brakes up to 7.5 kW Braking system for feeds up to 5.5 kW 1st infeed roller with photocell - Spindle speed 7200 rpm, including motor power 7.5 kW - Improved sound insulation of the full safety enclosure. Codpfx Aevvkcisdaori Storage location: Customer