Used Blow Moulding Machine for sale (65,232)

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Chjdpetyaypjfx Amhja

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Csdpev Extzsfx Amheha

Year of construction: 2013, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, distance between tie bars: 420mm, max. injection volume: 144cm³, operating hours: 54164h. Documentation available. On-site inspection is possible. Chodpfx Amjt E Trbehea

Year of construction: 1995, condition: ready for operation (used), A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible. Chsdpfxjwut Hte Amhja

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible. Codpfxsw Emybo Amhoha

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Codpfoxrf Nlox Amhoha

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Chedpfx Ajyab I Ujmhea

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Codpforc Hibox Amhoha

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Codpfx Aoum U S Esmheha

Year of construction: 1998, condition: ready for operation (used), Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible. Cedow Hthzjpfx Amheha

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding facilities with two Husky injection molding machines, five complete tools with metal separator, gravimetric Motan mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of construction: 2015, max. shot weight: 2424g, max. PET throughput: approx. 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, bottom thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, bottom thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, bottom thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, bottom thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. 6) 48-cavity H-PET-AE mold. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, color mixing devices and T-conveyor. Documentation available. An on-site inspection is possible. Csdpfew Az Riex Amhoha

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Chsdew Ni Ibspfx Amhja

Year of construction: 2003, condition: ready for operation (used), Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible. Cedpfx Ajxrf Nrsmhoha

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Chsdpjilhfcsfx Amhea

Year of construction: 2018, condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Cjdpfxjr N Rh Hs Amhoha

Year of construction: 1999, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Cedet E Trhspfx Amhoha

Year of construction: 2016, condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Chjdpjugmx Ajfx Amhsa

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible. Cjdpoyddzfjfx Amhsha

Year of construction: 2007, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible. Chedpeyddzljfx Amhea

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 106531, working width: 230 mm, power: 75 kW (101.97 HP), input current: 163 A, table width: 230 mm, Equipment: cabin, Rarity! Four-side planer Weinig Powermat 500 with splitting unit!! (the last two spindles fitted with saw blades, anti-kickback device, splitter wedge) for sale complete with all accessories. Chjdsyyw Ufepfx Amhsa The machine has 7 spindles/shafts (bottom / right / left / top / bottom / right / left). We used the line to produce middle layers for three-layer board manufacturing. The machine is in perfect working order. The machine is still in operation and can be demonstrated. Further technical details will follow in the next few days...

Condition: ready for operation (used), Year of construction: 1970, operating hours: 1,362 h, functionality: fully functional, machine/vehicle number: 9286, planing width: 600 mm, Planer machine Kupfermühle Chedpfoyyvuwex Amhea 5 spindles: bottom / top / right and left / bottom We have produced castle floorboards with this machine, and it was operational until the end. The machine can be demonstrated. Due to its age, it is sold without warranty or guarantee.

Condition: used, Year of construction: 2004, machine/vehicle number: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Technical Specifications & Performance Data Csdox H Tf Topfx Amhjha Manufacturer: Krones Model: Contiform S8 Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts. When supplied refurbished, a 6-month warranty is available, offering confidence in performance and longevity for second hand indus...

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Chedpfxsx H Tgdj Amhsa Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ...

Condition: good (used), Four-side planer SCM SINTEX – very well-maintained machine from a small joinery Weight: 925 kg Dimensions (L x W x H): 340 x 100 x 160 cm 380V 4 spindles Bottom/top spindle 7.5 kW Left/right spindle 7.5 kW Max. working height 105 mm Max. working width 180 mm Infeed table 2300 mm Csdpsyuw Rnjfx Amhsha Spindle diameter 40 mm

Condition: used, screw diameter: 35 mm, For sale: SJ35 Single Screw Plastic Extruder manufactured by Zhang Jia Gang Friend Machinery Co., Ltd. A compact and reliable extrusion unit suitable for small- to medium-scale production—ideal for laboratory testing or extrusion of plastic tubes, profiles, or filaments. The machine is fully functional, well maintained, and available for immediate inspection. Technical Specifications Model: SJ35 Manufacturer: Zhang Jia Gang Friend Machinery Co., Ltd. (China) Csdpfsxuczqex Amhsha Screw diameter: Ø35 mm L/D ratio: 35:28 Main motor power: 7.5 kW Center height: 1000 mm Gearbox: ZLYJ112 (ratio 16:1, 2017) Heating zones: multiple, each independently controlled Drive: ABB inverter control Hopper dryer and feeder included Electrical supply: 400 V / 3 phase / 50 Hz Condition: fully operational and tested Condition Very good technical and visual condition Equipped with digital temperature controllers and main motor speed control Comes with complete electrical cabinet with ABB inverter and wiring Regularly maintained, all components present Available for inspection and testing in Ivanka pri Nitre, Slovakia Price €5,000 (negotiable) Ex-works Ivanka pri Nitre, Slovakia Ideal for: - Plastic extrusion of small profiles, tubes, and filaments - Laboratory testing and material development - Educational or pilot-scale production facilities