Used Blown Film for sale (1,437)

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FAN XF 480 NGD Roll-off Tipper PHT 20 Palfinger Options: - CRYSTAL WHITE - Sleeper Cab - Aero Baseplate - Maintenance-free mechanical 4-point cab suspension with integrated shock absorbers - Light-transmitting sun visor - LED headlights, cornering lights and fog lights mounted on the bumper - LED headlights - LED daytime running lights - Windshield made of two-layer laminated glass with sun protection film - Double-glazed windows in the rear wall of the cab - Tempered, single-layer safety glass - Main mirror and wide-angle mirror - DAF Corner View - Leather-covered steering wheel - Interior trim color: Luxury - Dashboard design: Vision - Cab, interior trim: Hexagon - Air-suspended driver's seat - Super Air - Adjustable armrests on both sides of the driver's seat - The driver's seat is attached to the cab floor - Foldable co-driver seat with table function - Extendable dashboard table on the upper center console - Open storage compartment on the center console - Refrigerator and drawer below the lower sleeping berth - Xtra Comfort spring core mattress, thickness 150 mm - Protective net on the lower sleeping berth - Curtains along the windshield and side windows - LED interior lighting for the cab - Automatic temperature control (ATC) - 6 kW water-air auxiliary heating with waste heat pump and timer - Roller blind on the driver's side - Roller blind on the co-driver's side - Roof hatch with electric operation - Electric windows Hodpfsz Hr Iusx Abusw - Additional accessory power supply 2 x 24 V / 40 A - ECAS remote control with illuminated buttons - PACCAR Connect subscription - DAF infotainment system including DAF Truck Navigation - Luxury speaker system - Predictive Cruise Control - Driver Performance Assistant (DPA) - Speed limiter recognition - DAF Drowsiness Detection and Distraction Detection - Lane change warning system - Electronic Stability Control (ESC) - Acoustic reversing warning system - Hill start assist - Front axle type 163N - Driven rear axle - Tag axle load 8.0 t - Axle load monitoring - Axle load limiter 11.5 t - Parabolic suspension at the front - Lifting mechanism for the steered tag rear axle - Tire supplier Goodyear - Tire pressure monitoring - Steel disc wheels, silver-grey - Tire size 315/70R22.5 - Engine MX-13, 6-cylinder diesel engine with multi-stage torque, 12.9 liters. Power: 355 kW - 483 hp at 1600 rpm - Emission class Euro 6 - ECO mode - Idle shutdown, after 5 minutes of idling - Automated transmission, TraXon, 12 gears - Automated direct-drive transmission TraXon 12TX2620, gear ratio 16.69-1.00, 12 gears - Traction assistance 15.0 t - Software for automated transmissions - Rear axle ratio 2.69 - Driven rear axle with mechanical differential lock - MX Engine Brake - Pneumatic control for parking brake - Spring brake cylinder 1, front axle - Parking brake assist - Wheelbase 4.80 m / rear overhang 2.70 m - Longitudinal member height 310 mm, thickness 7.0 mm. Internal reinforcement front and rear - 620-liter aluminum fuel tank on the left side, height 620 mm - Drawbar crossmember with ringfeder trailer coupling - Pneumatic connection for trailer with swivel couplings - Electrical connection for trailer, 24 V with 15-pole socket - ECAS control - LED side marker lights - Rear engine PTO, mounted on the MX-13 engine in the 13 o'clock position, with direct pump connection - Generator 130 A, batteries 2 x 210 Ah AGM - Battery power

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: A-250101, total length: 4,600 mm, total height: 1,800 mm, total width: 1,250 mm, input voltage: 230 V, overall weight: 650 kg, compressed air connection: 4 bar, warranty duration: 3 months, input current: 6 A, roll width: 680 mm, pipe diameter (max.): 76 mm, product height (max.): 120 mm, product height (min.): 25 mm, product length (max.): 550 mm, product length (min.): 100 mm, Item A250101 – Record Jaguar 88 Flow Pack Machine For sale: Used Record Jaguar 88 flow pack packaging machine. Product flow direction: Left to right Machine finish: Painted Machine Specifications: Overall machine length: 4.6 metres Machine width: 1.2 metres Overall machine height: 1.8 metres Working height: 0.85 metres Usable infeed conveyor length: 2.0 metres Usable outfeed conveyor length: 0.5 metres Flight distance: 400/800 mm Machine capacity: 3,600 packs per hour Hodpfsz Er Nvsx Abuow Machine Connections: Power supply: 230 V N + PE Connected load: 3.2 kW Plug type: CEEform, 5-pin, 16 A Compressed air: Yes (the machine can also operate without compressed air) Machine Features: • Independent temperature control for the cross-sealing unit and longitudinal sealing rollers • 1 set of pulling rollers • 1 set of sealing rollers • 1 set of folding rollers for the longitudinal sealing seam • 1 set of sealing knives, 270 mm wide • Passage height of the cross-sealing unit: 150 mm • Safety coupling in the cross-sealing unit • Flight distance: 400/800 mm • Two-speed control of the flights • Fixed forming shoulder • Maximum film width: 600 mm • Top chain with flights • Mechanical film-length adjustment • Pneumatic product pushers • Mechanical adjustment of cross-sealing speed • Rotating control panel • Machine mounted on wheels for mobility, with adjustable feet • Electronic speed control via potentiometer • Additional 230 V socket • Equipped with a hot foil printer for printing the date on the film • Pneumatic opening and closing of the sealing rollers • Usable infeed conveyor length: 2,000 mm • Usable outfeed conveyor length: 500 mm • All parts that come into contact with the product are made of plastic or stainless steel The machine is particularly suitable for tall and/or long packages.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA08, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) Hedjz Ipdcjpfx Abuow F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MARATHON04, MARATHON semi-automatic manual film wrapper TECHNICAL DETAILS The world's only "PATENTED" non-electrically powered mobile stretch wrapper, capable of wrapping pallets with LLDPE stretch film The machine wraps loads of any shape, weight and size The use of pre-stretched film with a roll diameter of max. Ø 230 mm is recommended Min. load dimensions: 650 x 400 mm Min. load weight: 50 kg Wrapping height (including pallet) 2000 mm Easy to operate without having to rely on the power of a motor Manual movement by the operator The film carriage is moved up and down manually The machine features simplified functions Replaces hand wrapping MANUAL CHANGING OPTIONS The operator is the motor, windings up and down freely selectable FILM SLIDE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Hsdpfsz Ipirox Abujw Foil specification Max. outer diameter Ø 230 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other Hsdpfoz Iprtjx Abuow F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS21, Exhibition unit ATLANTA NEOS stretch wrapper with articulated arm 99 individually storable programs Start/stop at the same position (corner counter) Wrapping height 2000 mm Mast height approx. 1500 mm (fits through almost any door and in almost any van) Powerstretch PRS 200% film (more available as an option) Motorized pre-stretch system with stepless adjustment Electronically controlled film tension via control unit IEF quick-loading system for easy film roll changes Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit (available as an option) Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series Minimum 160 pallets per Charging – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height “Machine with MAST (pallet included) 2,150 mm Height measurement via light sensor or dimension input on the display Protective bar for emergency stop of the drive Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push buttons for start & stop Machine function compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes Hsdpfx Aez Iq Trobujw - Adjustable machine speed around the pallet up to 80 m/min Upward and downward carriage speeds independently adjustable - Upward carriage speed from 1.3 to 5.4 m/min - Downward carriage speed from 1.3 to 5.4 m/min - Number of wraps at the pallet base (1-10 wraps) - Number of wraps at the pallet head (1-10 wraps) - Pallet wrapping height adjustment - Film application tension for foot and head wrapping / ascending and descending, independently adjustable - Film pre-stretch for foot and head wrapping / ascending and descending, independently adjustable - Ergonomic height for film changes ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable wrapping programs for the NEOS arm - Cross wrapping (upward/downward) - Simple wrapping (upward only or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a preset height (with the height sensor deactivated) - Wrapping cycle for large pallets - Wrapping cycle for top sheet film - Soft start cycle for applying edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp edges Pallet edge wrapping Wrapping cycle with manual or motorized cord formation (optional) Further systems available immediately from our Ludwigsburg warehouse Also available with the ARYA system – automatic film application possible

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top Hedpfx Abjz Irx Neujw - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) Hjdsz Ir Haopfx Abusw - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS07, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) Hedpfx Absz Inbyeuew - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report Hedpfx Aboz D Aqueuow with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Hedpfx Ajyr Aiwebuew Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: HELIX 30, Current Status & Availability: The stretch wrapping machine is fully operational and is currently in daily use. Availability: The entire system is currently fully integrated into production and can be inspected under operating conditions after consultation. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47/2026. System Description: - Stable 4-column construction - Rotating arm with film carriage - Top sheet applicator (integrated) - Turntable for pallet rotation - Automatic pallet height detection using a photoelectric sensor - Variable adjustable number of top and bottom wraps - Variable adjustable wrapping program - Blowing unit: this unit blows air onto the beginning of the film from below and wraps it in. - Pre-stretch system P.G.S.A., see section 1.5 1.5.1 For reducing film consumption and increasing load securing - With this pre-stretch system, the tension of the film on the load can be adjusted via the adjustable dancer roll. - PLC control system Siemens S7-200 with a free-standing control cabinet - Machine operation and information texts via operator display - Triple indicator lights to display the operating states - Machine equipped with Robopac standard components - Electrical installation according to protection class IP 54 - Documentation - Machine complies with CE and EMC standards Safety light barriers at the infeed and outfeed (standard Robopac Sistemi). Hsdpfxsy Sziqj Abusw In accordance with the EC directives for machinery (EC Directive 89/392), the system receives a CE marking and is supplied with a declaration of conformity. - Machine equipped with European safety standards with EMC (89/336/EEC) and EU standards in excerpts EN 292, EN 294, EN 811 EN 60204 - Machine will be completely assembled and tested before delivery - Packaging suitable for transport by truck (machine on a wooden pallet covered with film)

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R adhesive applicator - 1300 mm - NEW MACHINE - Feeder from the adhesive applicator to the conveyor - Infeed conveyor, 6000 mm long x 950 mm wide, with drive - ORMA 5100x1400 mm surface hydraulic press - 12 pistons, hot water plates, refurbished - Outfeed conveyor, 6000 mm long x 950 mm wide, with drive This press requires medium to high pressure for operation to ensure that the boards are 100% flat. Dimensions of veneering boards: 5100 x 1400 mm (solid, drilled steel boards) Board opening: 180 mm Hodpfjvva Sysx Abuow Pressure at full surface: up to 10 kg/cm2 Number of hydraulic pistons: 12 pcs - piston diameter 140 mm Teflon MYLAR film on the boards Preparation for heating the boards with hot water - without a boiler Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine has been completely refurbished, adjusted, and tested. Price: EUR 49,000,- excluding VAT, without the OSAMA adhesive applicator Price: EUR 58,000,- excluding VAT, including the OSAMA adhesive applicator

Condition: new, power: 368 kW (500.34 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Braking system Available in multiple units!!! Equipment: Preparation for auxiliary drive Emission standard EURO VI E DRIVE T. 315/70R22.5 Speed limiter 90 km/h Roof hatch, electric version Front grille design Standard black Driver's cab tilting mechanism, manually operated Mirror Cams Cover for AS FHS in vehicle color / For AT/AD in black AS driver's cab high roof Driver's cab roof insulation, standard Hodpfx Aoz Si Urebuow Sun blind for side window Driver's side dashboard design: plastic with black trim strips COC - Certificate of Conformity INSTRUMENT CLUSTER 10 INCHES Passenger seat, static Weight variant front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg) Air compressor, 2-cylinder, 630 ccm, with integrated clutch, demand-controlled Smart generator 2880 W (24V x 120A), demand-controlled Air suspension on front axle Batteries in the frame overhang Wheel chocks, 2 pieces SR-SOLO LIGHT 17x Stabilizer bar, front axle Exhaust pipe, to the left Air filter unit under the driver's cab Preparation for toll system (OBU), including antenna and wiring on the dashboard without receiver unit ConnectivityBox 4G, telematics contract optional Engine idle shutdown Standard engine setting Cursor 13 Tire pressure monitoring system (TPMS), sensors inside 4 DIN slots, storage compartment above, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0 Infotainment 10" TFT display Transmission software ECO-Roll (coasting function) GPS cruise control Hi-Cruise Adaptive cruise control (ACC) Extended driver distraction warning system Standard step behind the driver's cab (catwalk) Hill start assist, for comfortable starting on inclines Electronic stability program (ESP) Rear monitoring system with camera, blind spot monitoring system (BSIS), right Intelligent speed assistant (ISA) Side marker lights Front area monitoring system (MOIS) Emergency braking assist (AEBS) Preparation for alcohol interlock (ALC) with cable Alcoa aluminum rims, LVL ONE Painting of the driver's cab plastic parts in the driver's cab color Luggage compartment on the left and right IVECO logo, gunmetal grey Air suspension for driver's cab Black decorative film on doors Sun visor, transparent, installed on the outside of the driver's cab roof Premium refrigerator and storage box EC control unit digital 4.1 ADR Auxiliary heater, diesel/water 4kW Air conditioning, fully automatic in connection with stationary air conditioning With curtains on the bed Lower bed, one-piece, firmness/lying feel – soft, incl. adjustable headrest Signal horn behind the bumper (compressed air) Electronic immobilizer and 3rd vehicle key Hands-On-Detection (HOD) Leather steering wheel Driver's seat HI-Comfort, air-sprung, with 3-stage cooling or heating function Smart storage compartment above Electro-hydraulic power steering Air tank in aluminum version, number depending on suspension version and trailer version Without jack Battery 210 Ah, high-performance AGM, battery disconnect switch, electric, in the driver's cab and on the chassis frame according to ADR/GGVS Ride height, standard Fifth wheel coupling, manufacturer Jost Fuel tank 1190 liters (710 liters right and...

Condition: new, power: 368 kW (500.34 HP), axle configuration: 4x2, color: white, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, EBS, air conditioning, - Braking system Available in multiple units!!! Equipment: Preparation for auxiliary drive Emission standard EURO VI E DRIVE T. 315/70R22.5 Speed limiter 90 km/h Sunroof, electric version Front grille design Standard Black Cab tilting mechanism, manually operated Mirror Cams Cover for AS FHS in body color / For AT/AD in black AS cab, high roof Cab roof insulation, standard Sun visor for side window Driver's side dashboard design: plastic with black trim COC (Certificate of Conformity) INSTRUMENT CLUSTER 10 INCHES Passenger seat, static Weight variant, front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg) Air compressor, 2-cylinder, 630 cc, with integrated clutch, demand-controlled Smart generator 2880 W (24V x 120A), demand-controlled Air suspension on front axle Batteries in frame overhang Wheel chocks, 2 pieces SR-SOLO LIGHT 17x Stabilizer bar, front axle Exhaust pipe, to the left Air filter unit under cab Preparation for toll system (OBU), includes antenna and wiring on the dashboard without receiver unit ConnectivityBox 4G, telematics contract optional Engine idle shutdown Standard engine setting Cursor 13 Tire pressure monitoring system (TPMS), sensors inside Hedez Si Uxopfx Abuew 4 DIN slots, storage space above, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0 Infotainment, 10" TFT display Transmission software, ECO-Roll (coast function) GPS cruise control Hi-Cruise Adaptive Cruise Control (ACC) Advanced Driver Distraction Warning Standard catwalk behind the cab Hill start assist (Hill Holder), for comfortable starting on inclines Electronic Stability Program (ESP) Rear view monitoring system with camera, Blind Spot Information System (BSIS), right Intelligent Speed Assist (ISA) Side marker lights Front over-run protection (MOIS) Advanced Emergency Braking System (AEBS) Preparation for alcohol interlock (ALC) with cable Alcoa aluminum rims, LVL ONE Painting of cab plastic parts in cab color Storage compartment left and right IVECO logo, Gunmetal Grey Air suspension for cab Black decorative film on doors Sun visor, transparent, installed on the outside of the cab roof Premium refrigerator and storage box Digital EC control unit 4.1 ADR Auxiliary heater, diesel/water 4kW Fully automatic air conditioning in conjunction with stationary air conditioning With curtains on the bed Lower bed, one-piece, firmness/feel – soft, including adjustable headrest Horn behind bumper (compressed air) Electronic immobilizer and 3rd vehicle key Hands-On-Detection (HOD) Leather steering wheel Driver's seat HI-Comfort, air-suspended, with 3-stage cooling or heating function Smart storage space above Electro-hydraulic power steering Air tanks in aluminum version, number depends on suspension version and trailer version Without jack Battery 210 Ah High Performance AGM, battery disconnect switch electrically in the cab and on the chassis frame according to ADR/GGVS Standard ride height Fifth wheel coupling, manufacturer Jost Fuel tank 1190 liters (710 liters right and...

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 Hsdpfx Abjz I Dzieujw - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,020 kg, maximum load weight: 28,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 1,060 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Year of construction: 2026, Equipment: VDI 2700 certified, Curtainsider Mega Tailor-made transport solution Configure your Fliegl vehicle to suit your requirements. The vehicle shown is an example. Production and equipment are customised individually to customer specifications. #Chassis for haulage semi-trailers - With "Preload" slight pre-tension in the gooseneck area, fifth-wheel plate with replaceable 2" kingpin - Outer frame slightly inclined with "Load-Lock-Profil" for attaching lashing straps - Note: free landing gear corner clearance / free rearward swing radius approx. 1,930 mm - Pull-out ladder at rear - Optionally with patented "Fliegl D-Lock" door holder - 2 wheel chocks with holder - Aluminium side underrun protection - Galvanised steel rear underrun protection - Quarter mudguards in front of 1st axle and behind each axle - Rear corner impact protection - Optionally with pallet stop on both sides, approx. 20 mm high, bolted version #Axles + suspension - Disc brake axles - Laser-aligned axles/running gear: reduced tyre wear and fuel consumption - Air suspension #Braking system - 2-line compressed-air braking system - Colour-coded lines for easy servicing - Spring brake parking brake - 2 mismatch-proof coupling heads at front - 24 V EBS, electronic braking system with EBS socket at front - With raise/lower valve + auto-reset function - Vehicle stability system #Wheels and tyres - Tyre size 435/50 R19.5" - Optionally aluminium rims #Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - 2 white front position lights - 2 white/red outline marker lights at rear Hedpfx Aboz Snwweuow - 2 x 7-pin and 1 x 15-pin mismatch-proof sockets at front - Optionally with additional work lights at rear, on landing legs or in the interior #Floor - Film-faced plywood approx. 30 mm thick on longitudinal bearers for high point load capacity, forklift axle load up to max. 7,100 kg #Front wall / front corner posts - 2,580 mm high, heavy-duty steel corner posts, release device for side curtain at front wall - "Crash-Blocker", bottom inside at approx. 140 mm height with steel impact protection #Rear wall / rear corner posts - Steel rear corner posts up to lower edge of roof, curtain attachment with round tube and curtain tensioning ratchet - Rear portal doors, double-wing, each with 2 internal espagnolette locks - Patented Fliegl "I-Lock" door lock – winner of the iF Design Award #Curtain - With welded-in vertical straps - 5 rows of aluminium or wooden insertion slats #Roof - Sliding roof, rear end bow folds up, roof cover slides from rear to front, curtain colour: white - Optimised rain gutter at rear, at top of rear bow, above the doors - Mechanical or hydraulic lifting roof #Optional - Fliegl manufacturer's certificate for body strength to EN 12642 XL (for payload up to max. 27,000 kg) - Fliegl manufacturer's certificate for body strength to DL 9.5, pallet stop on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm (pallet stop not in combination with dropsides) (for payload up to max. 27,000 kg) - Fliegl manufacturer's certificate for load securing to VDI 2700 sheet 12 ff., pallet stop on both sides, approx. 20 mm high - Rear marking plates to ECE-70 - Also available with various load securing options, as 2-axle version and as Xtra-Long Attention: archive images

Condition: used, mileage: 449,000 km, power: 220 kW (299.12 HP), first registration: 06/2018, fuel type: diesel, number of seats: 39, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), Our internal vehicle number: 1101 Hsdpfjxb Iimsx Abujw Mercedes-Benz Citaro C2 Power output: 220 kW Emission standard: Euro 6C Type: City bus Vehicle class: M3 First registration: 06/2018 Mileage: Original. * ZF automatic transmission D/N/R * 39+1 seats * 65 standing places * LAWO destination display front/side/rear/side with control unit * Electric sunblind * Air conditioning * Radio * Camera system / video surveillance * Folding ramp * Large multi-purpose area – for wheelchair or stroller * Convector heating * Double glazing * 2 folding windows installed * Original mileage * Vehicle is decal-labeled – film-coated * Vehicle is sold without passenger information screen (LAWO Slave 18.5") and ProSys box * Ex works price Note: Vehicle is registered – mileage and condition may vary Customer is responsible for independently inspecting the condition and equipment of goods/vehicle! All information is provided without guarantee Subject to prior sale See our general terms and conditions (AGB)

Condition: used, Year of construction: 2013, machine/vehicle number: ET238, Used KRONES labeller machine - 2013Technical Specifications & Performance DataThis Krones rotary labeling machine is engineered for high-speed wrap-around labeling with OPP film using hot melt adhesive. Built in 2013, it is suitable for modern beverage production and industrial packaging lines, offering dependable performance for second hand and used bottling line applications.Manufacturer: KronesModel: AC 3/N/PEYear: 2013Maximum speed: 25,000 bphMachine type: Rotary labeling machineLabel type: OPP roll-fed wrap-aroundAdhesive: Hot glueNumber of plates: 15Machine pitch: 111 mmLabel reels: 2 reels, max roll diameter Ø 500 mmLabel magazines: 2Container material: PETCurrent bottle format: 0.5LWorking height: 1200 mmElectrical data: 400 V, 3 PH + N, 50 Hz; full-load current 23 A; pre-fuse 35 A; enclosure rating IP54Compressed air: 7 barApprox. overall length: 3800 mmHMI: KronesPLC: SiemensAdvanced Automation & Control SystemsThe machine integrates a Krones HMI for intuitive operation and recipe management, coupled with a Siemens PLC for reliable, industry-standard control. The hot glue roll-fed system is optimized for consistent label feed, precise cutting, and accurate wrap-around application at high speeds. The rotary carousel with dedicated bottle plates supports stable container handling, while quick-access stations and repeatable settings facilitate efficient operation and changeovers.Operator-friendly Krones HMISiemens PLC-based automationRepeatable settings for label and container changesIP54 electrical cabinet protectionProduction Line Integration CapabilitiesDesigned for seamless integration into PET bottling equipment, this labeling machine can operate as a standalone unit or inline within a complete packaging machinery ecosystem. It fits beverage production lines handling wrap-around OPP labels on cylindrical PET containers.Standalone or inline integration with conveyorsCompatible with PET cylindrical bottlesSuited for high-speed industrial packaging linesApplicable in used bottling line and second hand equipment upgradesMachine Condition & Maintenance HistoryThe machine is ready for operation, overhauled, and supplied with compatible spare parts. It comes with a 6-month warranty, offering assurance of performance and reliability for immediate deployment in production.Ready for useOverhauled and testedIncludes compatible spare parts6-month warrantyOperational Performance & VersatilityEngineered for beverage applications that demand consistent wrap-around labeling quality a... Hedj Adt Iwopfx Abuew

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck Hodpfx Aoy D D A Djbusw The machine is in operation and can be inspected.

Condition: used, Angle sealing machine with shrink tunnel Hjdpfsz Dtf Aex Abuew For sale is a professional, semi-automatic angle sealing machine with an integrated shrink tunnel from the Italian quality manufacturer Pactur. It is ideal for quickly and professionally shrink-wrapping cardboard boxes, books, bottles, textiles, or other packaged goods in shrink film. The Ladypack 80/SI model is characterized by its enormous flexibility and very large sealing frame. It combines the sealing and shrinking processes in a compact, mobile unit, which saves a great deal of space in the production hall. Impulse sealing system: The angle sealer works with a Teflon-coated sealing bar. It produces clean, extremely tear-resistant seams without smoke development. Efficient shrink tunnel: The integrated tunnel has a closed recirculation system with adjustable air deflectors. This ensures a completely even heat distribution and a perfectly smooth shrinking result – even with demanding product geometries. Precise digital control: The clear control panel allows the sealing time, cooling time of the sealing bar, and tunnel temperature to be adjusted precisely to the film thickness used (PO, PE, or PVC). Heavy-duty conveyor belt: The tunnel is equipped with a durable, heat-resistant metal grid conveyor belt. It reliably transports even heavy packaged goods (e.g., printed materials, canned goods, or wooden parts). Ergonomic infeed table: The separate, mobile preparation table allows for quick and easy threading of products into the half-tube film. The film unwinding is smooth and easy thanks to the ball-bearing system. Perfectly suited for printing companies, logistics centers, laundries, or contract packers for shrink-wrapping: - Cardboard boxes and multi-packs - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle carriers and cans Technical data & features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 series Type: Angle sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packaged goods) Control: Digital control unit for precise adjustment of sealing time and tunnel temperature Transport: Robust and heat-resistant metal grid conveyor belt in the shrink tunnel Mains voltage: 380 V / 3 phases Max. power consumption: 11.5 kW Mobility: The entire system and the separate infeed table are mounted on stable swivel casters Max. film roll width 700 mm Max. film roll diameter Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (due to the design, in the tunnel opening) Net weight: approx. 400 kg "Everything from one source: We will gladly offer you a suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2014, For sale is a semi-automatic packaging line from MINIPACK-TORRE, consisting of a Modular 70 Digit L-sealer and a Tunnel 70 DG shrink tunnel. The equipment is used but in good condition. Both machines operate as a single set and are designed for professional packaging of products in heat-shrink film. Ideal for industrial enterprises, logistics centers, warehouses, and packaging of electronics, metal, wood, food, and other products. The set includes: 1. L-sealer Manufacturer: Minipack-Torre (Italy) Model: Modular 70 Digit Year of manufacture: 2014 Voltage: 380 V Frequency: 50 Hz Power: 2.3 kW Features: Semi-automatic operation L-shaped (corner) sealing and cutting of the film Digital control panel Simple parameter adjustment 2. Shrink tunnel Manufacturer: Minipack-Torre (Italy) Model: Tunnel 70 DG Hsdpfx Aozg Ezdsbusw Year of manufacture: 2014 Voltage: 380 V Frequency: 50–60 Hz Power: 13.5 kW Features: Hot air circulation Uniform film shrinkage Adjustable conveyor speed Adjustable tunnel temperature Applications Perfect for packaging various products in shrink film: metal products; electronics; wood products; boxes; spare parts; food products; industrial products. Reliable Italian equipment that ensures fast, aesthetically pleasing, and professional packaging. If you have any further questions, we will be happy to answer them.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Hedswd Emwspfx Abujw Min. width of coil: 120 mm Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Hodpfszilz Nsx Abujw Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: like new (used), Year of construction: 2022, Ulma FR 200 The electronic, automatic flow-pack machine, model ULMA FR 200, has been specially developed to package a wide variety of different products in flat pouches (flow-pack) or pillow packs. Technical specifications Model: FR 200 Condition: Used (reconditioned by ULMA Germany) Year of manufacture: 2022 Performance: Up to 70 packages/minute (depending on film/paper and product characteristics). Type of packaging: Flow-pack Machine equipment Length of infeed conveyor: Free infeed section 2500 mm Equipment features ✅ Stainless steel design ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Signal for printer/labeler ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross sealing, except for tall products (max. 160mm), sealing bar width 300mm ✅ Cross sealing system for heavy trays ✅ No product / no bag function ✅ Suitable for paper packaging ✅ Height-adjustable cross sealing Documentation & Operation Language (documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 5,405 × 1,225 × 1,715 mm Hsds Af Uz Eepfx Abuow Shipping weight: 989 kg (including transport packaging)