Used Bmt for sale (133)

Condition: excellent (used), Year of construction: 2016, Model: KSB MTC B 125/7-9.2 Serial number: 9973088585 / 001000 / 01 Kodpfx Ageu Upuis Usdn Capacity: Q = 120.00 m³/h Headroom: H = 151.05 m Speed: N = 1497 rpm Year of manufacture: 2016 Motor manufacturer: Siemens Engine model: 1CV3280B / 1PC30382DB034HT0 Weight: 570 kg Bearings: DE: 6317-C3 NE: 6317-C3 Protection class: IP55 Efficiency class: IE3 Ambient temperature range: -20°C to ≤ 40°C Electrical parameters: 400 V Δ, 50 Hz, 133 A, 75 kW, 1485 rpm 690 V Y, 50 Hz, 77 A, 75 kW, 1485 rpm 460 V Δ, 60 Hz, 131 A, 86 kW, 1785 rpm 460 V Δ, 60 Hz, 116 A, 75 kW, 1788 rpm

Condition: used, machine/vehicle number: 8FBMT35-12855, Year of construction: 2019, operating hours: 480 h, lifting height: 5,500 mm, free lift: 1,950 mm, fuel type: electric, mast type: duplex, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 2,400 mm, Weights Empty weight: 6.750 kg Functional Lifting capacity: 3.500 kg Maximum passing height: 260,5 cm Supply voltage: 80 V Kedpfxjr S Tqce Ag Ujdn Dimensions of cargo space: 289 x 125 x 261 cm Other information Remanufactured: Yes Front tyre size: SE nicht kreidend Rear tyre size: SE nicht kreidend Fork carriage: Sideshifter Additional information Please contact Karl Leitner for more information = Additional options and accessories = - 4th valve - Free lift

Condition: used, machine/vehicle number: 8FBMT50-11315, Year of construction: 2018, operating hours: 1,034 h, lifting height: 4,000 mm, fuel type: electric, battery capacity: 750 Ah, battery voltage: 80 V, fork length: 1,800 mm, Empty weight: 8.280 kg Lifting capacity: 5.000 kg Kjdsray Srspfx Ag Uedn Maximum passing height: 280 cm Supply voltage: 80 V Dimensions of cargo space: 300 x 145 x 280 cm Remanufactured: Yes Front tyre size: SE abriebfrei Rear tyre size: SE abriebfrei Please contact Karl Leitner for more information = Additional options and accessories = - 4th valve

Condition: used, machine/vehicle number: 8FBMT35-12794, Year of construction: 2019, operating hours: 1,593 h, lifting height: 5,000 mm, free lift: 1,900 mm, fuel type: electric, battery manufacturer: Exide, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,800 mm, Weights Empty weight: 6.412 kg Functional Lifting capacity: 3.500 kg Maximum passing height: 258,5 cm Supply voltage: 80 V Dimensions of cargo space: 289 x 125 x 259 cm Other information Kdedpfxju Thrio Ag Uen Remanufactured: Yes Tyre brand: SE Front tyre size: SE nicht kreidend Rear tyre size: SE nicht kreidend Additional information Please contact Karl Leitner for more information = Additional options and accessories = - 4th valve - Heater

Condition: new, machine/vehicle number: 8FBMT50-13629, Year of construction: 2023, operating hours: 1 h, lifting height: 6,500 mm, free lift: 2,490 mm, fuel type: electric, power: 25 kW (33.99 HP), fork length: 2,200 mm, Empty weight: 7.721 kg Lifting capacity: 5.000 kg Maximum passing height: 338 cm Kdodpfxou Tbgho Ag Usn Dimensions of cargo space: 427 x 144 x 338 cm Charger current: 840 Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 8FBMT35-12967, Year of construction: 2019, operating hours: 1,412 h, lifting height: 5,000 mm, fuel type: electric, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Empty weight: 6.466 kg Lifting capacity: 3.500 kg Maximum passing height: 258,5 cm Supply voltage: 80 V Dimensions of cargo space: 289 x 125 x 259 cm Remanufactured: Yes Front tyre size: SE nicht kreidend Rear tyre size: SE nicht kreidend Please contact Karl Leitner for more information Kdsdporay Snjfx Ag Uon

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,701 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, fork length: 1,600 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 Mast type: Duplex Condition: Ready for operation and fully functional Kdjdpfx Agey Ab Tkj Uon Technical condition: very good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2021 Reach fork, sideshift, fork positioner, 3rd valve, 4th valve, front working lights, roof cover, safety light, LED.

Condition: used, functionality: fully functional, machine/vehicle number: 1565, Meteor 12 winding machine Ksdpfoyln Sdjx Ag Uodn Winding diameter: 60 x 80 mm Wire: 0.01 - 0.4 mm

Condition: ready for operation (used), Year of construction: 2013, Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible. Kodeuqac Depfx Ag Usdn

Condition: refurbished (used), Year of construction: 2000, Model BMTH 6.1,50 Year 1985 Technical data: Working length: 6010 mm Bending capacity steel 400 N/mm²: 1,50 mm Bending capacity alu 190 N/mm²: 2,00 mm Kdjdehgv Rkepfx Ag Usn Stands + Tension arms: 7 pcs Incl. 10-angle control Incl. powered cutter

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 1,618 h, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 1,390 mm, fuel type: electric, mast type: triplex, construction height: 2,590 mm, fork carriage width: 1,070 mm, fork length: 1,200 mm, empty load weight: 6,074 kg, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires Type: Non Marking Front tires Size: 23x10-12 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 18x7-8 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery Manufacturer: IBG Battery type: PzS Battery year of construction: 2015 Battery condition: 40 - 60% Kdodpfxot Ddxpj Ag Ujn Description: overhead guard, front work lights, BlueSpot rear, rotating beacon, 3rd valve to fork carriage, 3x single lever, code lock load protection grille, sideshift, integrated sideshift 3rd valve, front work lights, safety light, non-creeping tires, interior mirror, rotating beacon, single pedal, LED, seat,

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 9,635 h, load capacity: 3,500 kg, lifting height: 5,500 mm, free lift: 1,950 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, fork carriage width: 1,070 mm, fork length: 1,200 mm, empty load weight: 6,426 kg, drive type: Elektro, construction width: 1,210 mm, Electric 4-wheel forklift Load center: 500 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Normal Front tires Type: Non Marking Front tires Size: 23x10-12 Front tires Condition: 40 - 60% Rear tires Type: Non Marking Rear tires Size: 18x7-8 Rear tires Condition: 40 - 60% Battery Volt: 80V Battery Ah: 625Ah Kdjdpfx Agst Ddxie Ujn Battery Manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2015 Battery condition: 40 - 60% Description: overhead guard, front work lights, BlueSpot front + rear, 3rd + 4th valve to fork carriage, 2x cross lever, dual pedal, Smart Access Sideshift, integrated sideshift 3rd valve, 4th valve, front work lights, safety light, non-creeping tires, interior mirror, joystick, seat,

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 7,000 h, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 1,900 mm, fuel type: electric, mast type: triplex, construction height: 2,585 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Kdjdpfx Ajxux E Ssg Ujn Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 80V Description: Half cabin Sideshift, fork positioner, 3rd valve, 4th valve,

Year of construction: 2026, condition: new, Bosporas Machinery | AYIKA is a manufacturer of coil processing lines, roll forming lines and press feeding systems, offering high-quality and customized industrial solutions. High-performance heavy-duty cut to length line designed for precise sheet cutting with advanced configurations and up to 20-ton coil capacity. TECHNICAL DETAILS Sheet Thickness: 0.5 – 3 mm / up to 4 mm (heavy-duty configuration) Coil Width: up to 1500 mm Coil Weight: up to 20 tons Cutting / Shear Type: Gear Driven Guillotine Shear, Pneumatic Clutch Eccentric Shear, Hydraulic Shear, Rotary Shear Line Speed: up to 40 m/min (depending on configuration) Leveling System: Multi-Rollers Fine Straightener, Precision Straightener (Leveler) Stacking System: Automatic stacker (single or double stack option) Material Type: CR, HR, Galvanized, Stainless Steel, Aluminium, Hot Rolled Steel, Cold Rolled Steel This heavy-duty cut to length line is designed for precise and efficient processing of steel coils with widths up to 1500 mm and coil weights up to 20 tons. The system ensures high accuracy, stable operation and long-term reliability in industrial production environments. The line consists of integrated units including hydraulic decoiler, coil loading system, leveling unit, feeding system, cutting unit, conveyor system and automatic stacking unit. CONFIGURATION & FLEXIBILITY The system can be configured based on production requirements and material specifications: 0.5 – 3 mm standard duty configuration up to 4 mm heavy-duty configuration Different cutting technologies can be applied depending on production speed, accuracy and material type: Gear Driven Guillotine Shear Pneumatic Clutch Eccentric Shear Hydraulic Shear Rotary Shear The line can also be designed with single or double loop pit systems to optimize line speed, material flow and plant layout. KEY FEATURES Heavy-duty design for 20-ton coils High precision sheet cutting Advanced leveling system for flatness control Cutting options Kdjdpfx Asyy R Rmeg Uen Automatic stacking and conveyor systems Robust mechanical structure for long service life ENGINEERING & PERFORMANCE The machine is built with a robust mechanical structure and high-quality components to ensure long-term operation under heavy-duty conditions. The precision leveling system eliminates internal stresses and improves flatness, enabling accurate and repeatable cutting results. Advanced automation and control systems provide stable operation, reduced operator dependency and efficient production management. OPERATIONAL ADVANTAGES Short lead time compared to European manufacturers High production efficiency and continuous operation Low maintenance requirements Flexible and customizable design Reliable performance in demanding industrial conditions APPLICATION AREAS Steel service centers Automotive and metal component production Construction and infrastructure materials General sheet metal processing OPTIONAL EQUIPMENT Double stacker system Vacuum stacking system Coil handling and transfer systems Advanced automation solutions *Images included in this listing show reference installations of similar cut to length lines (3 mm and 4 mm thickness ranges) successfully manufactured and commissioned in recent years across different countries. These references demonstrate our proven engineering capability, reliable manufacturing quality and international project experience.

Condition: excellent (used), Year of construction: 2024, turning length: 830 mm, turning diameter over cross slide: 720 mm, spindle motor power: 35,000 W, spindle bore: 115 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 830 mm, rotational speed (max.): 2,800 rpm, CNC Lathe with c-axis DOOSAN - PUMA GT3100M MACH-ID 9658 Kodpfx Agjzfgrzj Usdn Make: DOOSAN Type: PUMA GT3100M Control: Siemens 828D ShopTurn Year: 2024 Part catcher Cromar chip conveyor Tool eye probe CROMAR Chip conveyor Samchully Chuck 380 mm 5 BMT Tool holders Max. turning Ø: 720mm X-Axis: 260mm Z-Axis: 830mm Spindle bore: 115mm Speedrange: 2800Rpm Spindle power: 35kW ATC / revolver: 12 Speed live tools:5000Rpm Speed live tools:5000Rpm Power live tools:7.5kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 5Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 4200mm Width: 2100mm Height: 2100mm Weight: 5650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 Kjdpfx Aoyvvt Ssg Usdn drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. There are 2 machines available. Price per unit. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: new, Year of construction: 2022, functionality: fully functional, HYUNDAI-WIA HD2200Y FANUC 0IT PLUS CNC LATHE WITH Y AXIS. MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 4,000 RPM MAIN SPINDLE. ▪ 6,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET - BMT55P ▪ HARDENED & GROUND BOX GUIDEWAYS Swing Over the Bed Ø 820 MM Swing Over the Carriage Ø 650 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 610 MM Bar Capacity – Main Spindle Ø 65 MM MAIN SPINDLE Chuck Size Ø 8” - 203 MM Spindle Bore Ø 76 MM Spindle Speed (Rpm) 4,000 RPM Motor (Max / Cont.) 18.5 / 15.0 [22.5 / 15.0] KW Torque (Max / Cont.) 206.2 / 125.4 [215.0 / 143.3] NM Spindle Type BELT Spindle Nose A2-6 Travel X 215 MM Travel Y 110 (± 55) MM Travel Z 680 MM Rapid Speed X 24 M / MIN Rapid Speed Y 10 M / MIN Rapid Speed Z 30 M / MIN HARDENED & GROUND BOX GUIDEWAYS Number of Tools 12 [24] Tool Size - OD 25 MM² Tool Size - ID Ø 20 MM Indexing Time 0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7] KW Milling Tool Speed 6,000 RPM Torque (Max / Cont.) 52.5 / 26.5 NM Collet Size Ø 16 – ER25 Type BMT-55P TAILSTOCK Taper MT 4 Quill Diameter Ø 80 MM Quill Travel 120 MM Travel 680 MM TANK CAPACITY Coolant Tank 200 L Lubricating Tank 2.0 L Electric Power Supply 27 KVA Thickness of Power Cable OVER 25 MM² Voltage 415 V / 50 HZ / 3PH Kdjdpfex Th Nysx Ag Ujn Floor Space (L x W) 3,380 x 1,800 MM Height 1,950 MM Weight 4,700 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CHIP - BUCKET STANDARD CHIP - CONVEYOR SIDE HINGED HIGH PRESSURE COOLANT SYSTEM 6.0 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE 30 KVA TRANSFORMER AND CABLE QUICK TOOL SETTER - AUTO PROGRAMMABLE TAILSTOCK IN LIEU OF STD TURRET UPGRADE - 12 STATION 24 POSITION BMT55P, LIVE TOOLS 6K RPM, 5.5 KW STANDARD FACTORY FITTED MACHINE OPTIONS SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) COOLANT TANK (SIDE TYPE) STANDARD COOLANT SYSTEM (NOZZLE) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD HYDRAULIC UNIT 35 BAR (30 LITRES) CALL LIGHT (1 COLOUR) FRONT DOOR INTERLOCK TOOLBOX STANDARD TOOLING PACKAGE QUILL TYPE TAILSTOCK WITH STD LIVE CENTER

Condition: new, Year of construction: 2023, functionality: fully functional, HYUNDAI-WIA HD3100YA FANUC 0IT PLUS CNC LATHE WITH Y AXIS MACHINE CONSTRUCTION & FEATURES ▪ ONE PIECE HEAVY DUTY CAST IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY. ▪ 3,500 RPM MAIN SPINDLE. ▪ 5,000 RPM LIVE TOOLING SPEED. ▪ HEAVY DUTY CUTTING WITH EXCELLENT PERFORMANCE. ▪ WEDGE TYPE Y-AXIS. ▪ 12 STATION HIGH SPEED RIGID SERVO TURRET – BMT55P ▪ HARDENED & GROUND BOX GUIDE WAYS MACHINE CAPACITIES Swing Over the Bed Ø 800 MM Swing Over the Carriage Ø 670 MM Maximum Turning Diameter Ø 420 MM Maximum Turning Length 760 MM Bar Capacity – Main Spindle Ø 81 MM MAIN SPINDLE Chuck Size Ø 10” - 254 MM Spindle Bore Ø 91 MM Spindle Speed (Rpm) 3,500 RPM Motor (Max / Cont.) 26.0 / 18.5 KW Torque (Max / Cont.) 734 / 522 NM Spindle Type BELT Spindle NoseA2-8 FEED Travel X265 MM Travel Y120 (± 60) MM Travel Z830 MM Rapid Speed X24 M / MIN Rapid Speed Y10 M / MIN Rapid Speed Z30 M / MIN Slide Type HARDENED & GROUND BOX GUIDEWAYS TURRET Number of Tools12 Tool Size - OD25 MM² Tool Size - IDØ 20 MM Indexing Time0.2 SEC / STEP Y-Axis Type WEDGE TYPE LIVE TOOL Motor (Max / Cont.) 5.5 / 3.7 KW Milling Tool Speed 5,000 RPM Torque (Max / Cont.) 70/0 / 35.4 NM Collet Size Ø 16 – ER25 Type BMT-65P TAIL STOCK Taper MT 5 Quill Diameter Ø 100 MM Quill Travelb120 MM Travel b830 MM Voltage 415 V / 50 HZ / 3PH Floor Space (L x W) 3,630 X 1,910 MM Height 1,960 MM Weight 6,200 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR & CHIP BOX HELICAL INTERPOLATION FUNCTION HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO MAIN SPINDLE - 3,500 RPM, 26.0 / 18.5 KW, 734 NM BELT DRIVEN PROGRAMMABLE TAILSTOCK IN LIEU OF STD QUILL FORWARD / REVERSE CONFIRMATION DEVICE QUILL TYPE TAILSTOCK - MANUAL TYPE MT#5 100 MM DIA QUILL, 120 MM QUILL TRAV STANDARD FEATURES SPINDLE POSITIONING MAIN - 0.001 DEG INDEX (C1-AXIS) CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 10 INCH 3 JAW HYDRAULIC CHUCK CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE HYDRAULIC CHUCK PRESSURE INTERLOCK - MAIN SPINDLE Kjdpfx Agox Thu Ns Uedn STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) PART PROGRAM STORAGE - 2MB SMART GUIDE-I (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 180 LITRES FULL SPLASH GUARDING SYSTEM CALL LIGHT TOOLBOX TOOLING PACKAGE QUILL TYPE TAILSTOCK 12 STATION BMT65P SERVO TURRET, LIVE TOOLS 5,000 RPM, 5.5 KW, 47.0 NM

Condition: used, Year of construction: 2022, turning diameter 420 mm turning length 1350 mm spindle passage 101 mm control Siemens SL 828D ShopTurn number of controlled axis 4 turning speed range 3000 U/min power requirement 22/18,5 kW rapid speed 30 m/min number of tapers in turret head 12/24 BMT 65 number of driven tools in turret 12 BMT 65 Spindel speed of driven tools 5000 U/min Spindelpower on driven tool 7,5/5,5 kW y-axis +/- 65 mm tail stock MT-5 weight 8,0 t dimensions 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. Kdedpfx Agjzfqf Sj Ujn - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour signal lamp - coolant gun - some jaws - external programming system MCS40501/2 - build in spindle

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, overall weight: 6,140 kg, number of axes: 4, This 4-axis MORI SEIKI NLX 2500Y was manufactured in 2013. It features a maximum swing over bed of 742 mm and a maximum turning diameter of 366 mm. The machine includes a powerful spindle motor with 18.5 kW and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500Y horizontal turning machine we have for sale. Contact us for further details. • Control unit: M730 BM • C-axis0.001° indexing • Maximum swing over bed: 742 mm • Maximum turning diameter: 366 mm • Maximum turning length: 705 mm • Maximum bar capacity: 80 mm • Spindle nose: ASA 8" • Tailstock: MT5 • Tailstock quill diameter: 80 mm • Tailstock travel: 734 mm • Turret stations: 12 positions • Motorized tool positions: 12 • Turret tool coupling: BMT • Turning tool size: 25 × 25 mm • Boring bar capacity: 50 mm • Maximum driven tool speed: 6,000 rpm Kdsdpfxezcphno Ag Uen • Driven tool motor power: 5.5 / 7.5 kW Additional equipment • Chip conveyor • Parts unloader arm • Parts conveyor belt • High-pressure pump with paper filter tank • Optical scales Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, spindle motor power: 18,500 W, overall weight: 5,500 kg, number of axes: 3, This 3-axis MORI SEIKI NLX 2500M was manufactured in 2011. It features a maximum turning diameter of 366 mm and a maximum turning length of 705 mm. The machine is equipped with a powerful spindle motor of 18.5 kW and a turret with 12 positions for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NLX 2500M horizontal turning machine we have for sale. Contact us for further details. • Control unit: MSX-853IV • Maximum swing over bed: 787 mm • Maximum turning diameter: 366 mm • Maximum turning length: 705 mm • Maximum bar capacity: 80 mm • Spindle nose: ASA 8" Kjdpfozcpcxox Ag Uodn • Tailstock: MT5, 80 mm quill diameter, 734 mm travel • Turret stations: 12 • Motorized/live tool positions: 12 • Turret interface: BMT • Turning tool size: 25 × 25 mm • Boring bar capacity: 50 mm • Maximum live tool speed: 6,000 rpm • Live tool motor power: 5.5 / 7.5 kW • Operating time: 212 h 39 min • Cutting time: 140 h 19 min • Power-on time: 15,408 h 57 min Additional equipment • Chip conveyor • Various/assorted tool holders Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition. Kedpfx Ajyhqkzjg Uodn Plastics-only medical device use. Y-Axis, live tooling, tailstock, workpiece unloader. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2009 Location: Ireland Availability: Immediate Machine Overview We are pleased to offer this 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition, available through Used Machine Tools Ireland. This machine was used only for dry machining of plastics by a medical device manufacturer, meaning: No heavy metal cutting No coolant contamination Exceptionally low mechanical wear The Mori Seiki NL Series is globally recognised as a benchmark for high-precision CNC turning, and the NL2000Y/500 is especially sought after due to its Y-axis capability, live tooling, and BMT (Built-in Motor Turret) design. Key Features & Benefits Y-Axis CNC Lathe – complex milling and turning in one setup BMT Turret Technology – superior rigidity, accuracy, and thermal stability Live Tooling up to 6,000 RPM – ideal for milling, drilling, and tapping Medical / Plastics-Only Use – extremely clean operating history Tailstock & Workpiece Unloader – ideal for automated production MSX-850 III Control – powerful, reliable Mori Seiki control system Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis: 260 mm Z-Axis: 590 mm Y-Axis: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial & radial driven toolholders ✔ Selection of static toolholders ✔ Extraction unit for plastic machining Additional Notes Used exclusively for dry plastic machining No coolant system fitted, however the machine is prepared for coolant installation and can be added at cost Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Plastic & polymer machining Precision CNC turning & milling Aerospace, electronics & high-tolerance components This Mori Seiki NL2000Y/500 CNC Lathe represents a rare opportunity to acquire a premium Japanese turning centre with an exceptionally clean usage history.

Condition: like new (used), Year of construction: 2023, operating hours: 343 h, functionality: fully functional, machine/vehicle number: G3791-0010, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20 W, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, bar diameter (max.): 51 mm, overall weight: 8,200 kg, • High-performance, integrated spindle motor • High productivity through simultaneous use of the upper and lower turrets • Robust BMT turret • Integrated machining through synchronized control of the main and counter spindle Specifications: • Max. turning diameter 230 mm • Max. turning length 705 mm • Chuck size, main/auxiliary 6" / 6" • Drive type: Integrated • Spindle speed 6,000 rpm • Spindle power 15/11 kW • Spindle torque 208/140 Nm • Travel distances (X1/X2/Z1/Z2/ZB) 65/195/700/720/700 mm • Rapid traverse (X1/X2/Z1/Z2/ZB) 20/20/40/40/40 m/min • Guide type: LM (linear motion) • Number of tools 2 x 12 • Tool size 20/32 mm • Milling spindle speed 5,000 rpm Kjdpfx Aezd Dizsg Usdn

Condition: used, Year of construction: 2014, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A-8 spindle bearing diameter 140 mm spindle bore 91 mm max. usable bar diameter 80 mm chucking diameter 250 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm max. usable bar diameter ( - ) mm chucking diameter 170 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. tool taper BMT 60 Schank height for square tool 25 mm Kdedpfx Agju Hq Rlj Uen Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 5,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Main- and Subspindle - C-Axis - Y-Axis - Tool-Drive

Condition: used, Year of construction: 2012, Technical details: turning diameter: 420 turning length: 1230 mm swing over bed: 700 mm swing diameter over slide rest: 550 mm centre distance: 1390 mm y-axis: +/- 60 mm turning speeds: 3500 1/min turret (x-stations): 12 power capacity: 22 / 18,5 kW : 1 / 12 x BMT rapid traverse x + z axis: 20 / 24 m/min : 76 mm Kodpfx Agot Acy Ae Usdn total power requirement: 50 kVA weight: 7,8 t dimensions of the machine ca.: 4,10 x 2,05 x 2,21 m CNC lathe with Y-Axis and driven tools, C-axis, tool eye, hydraulic 3-chaw-juck D= 250 mm, reinforced pump 15 bar, pressure-compensated clamping cylinder , 2 step clamping pressure, prepared for steady (without steady), progr. tailstock (dragging device), live tool device (3,7 kW, 3.000 rpm), chipconveyor, 1 pcs. live tool included approx. 15.500 working hours *