Used Bodo Gerhard Celle for sale (1,115)

Condition: good (used), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical specifications: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Redpfx Ajuviydol Ijt Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data!) We are happy to answer further questions by phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Rjdpfxoklv H Ie Al Iot Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4012 S(m) Technical Data: Temperature range: -40...+120 °C Rsdpfx Alouvipwe Iot Temperature tolerance: +/- 1.0°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95 % rH Humidity tolerance: +/- 5.0 % rH Dimensions: Test chamber volume: 13 m³ External dimensions (W x D x H): approx. 2260mm x 3850mm x 2780mm Test chamber (W x D x H): approx. 2254mm x 2645mm x 2251mm Door opening (W x H): approx. 2251mm x 2254mm Condition: used Delivery contents: (see picture) (Subject to changes and errors in the technical data!) For further enquiries, please contact us by phone.

Condition: good (used), TIRA Type: Walk-in Climate Simulation Chamber TCZ 4020 S-2k Technical Specifications: Temperature range: -40...+140°C Temperature tolerance: +/- 1.0°C Temperature change rate: 2 K/min Humidity range: 10...approx. 95% r.h. Humidity tolerance: +/- 5.0% r.h. Dimensions: Test chamber volume: 19 m³ External dimensions (W x D x H): approx. 2660 mm x 4960 mm x 3300 mm Test chamber (W x D x H): approx. 2270 mm x 3190 mm x 2756 mm Door opening (W x H): approx. 2270 mm x 2756 mm Condition: used Scope of delivery: (see picture) (Specifications subject to changes and errors!) For further questions, we would be happy to assist you by phone. Rodpfx Alouviume Iet

Condition: excellent (used), CTS Redpfxovb Hano Al Ist Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: Rjdpfevb E Uqsx Al Ist - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2026, condition: new, functionality: fully functional, total length: 1,030 mm, total width: 810 mm, total height: 2,290 mm, energy efficiency: B, input voltage: 400 V, DGUV certified until: 04/2027, type of input current: three-phase, warranty duration: 12 months, machine/vehicle number: 2026, Lillnord fermentation room Rjdpfsk Itizox Al Iet Model: Maryline R 103-81 T Touch screen computer control Temperature range from max. + 20°C to + 45°C Humidity from 60% to 90% RH for max. 30 trays 600x 800 mm or 60 trays 600 x 400 mm PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 400V, 3000 Watt, 16A-CEE plug Dimensions: 810 x 1030 x 2290 mm, WxDxH New device Lillnord service partners

Condition: used, EMAG VL 4 is a machining cell / vertical lathe engineered for high-precision work, exceptional accuracy and production reliability. Capacities: 2 machines, 2 axes; max workpiece dimension 200 mm; Z travel 400 mm; X travel 750 mm; turret 12 positions with 12 driven tools. Specs: spindle speeds up to 6000 min-1 with stepless control to 4500 min-1; spindle power 25/18 kW; torque 280/202 Nm; supply 3x400V 50Hz; total power 36 kW; footprint L5300×W2300×H3650 mm. Equipment: chip conveyor, automatic loading/unloading, set of toolholders, status light, spare parts. Achieves tight tolerances; suited for automotive, aerospace, machine tools and medical. Rjdpfsyxnyvox Al Iet

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 27876, overall weight: 4,000 kg, total length: 7,000 mm, total width: 2,500 mm, total height: 2,700 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08/04/26 and 16/04/26! TECHNICAL DETAILS Robot system: IRB 1400 M 2000 MACHINE DETAILS Operating voltage: 3 x 400 V Redpfxsyk Hlmo Al Ijt Frequency: 50/60 Hz Connection: 4.5 kVA Dimensions & weight L x W x H: 7000 x 2500 x 2700 mm Machine weight: 4 t External reference: 8

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, machine/vehicle number: 2026, Lillnord fermentation breaker Maryline Model: FR 103-81 T Touch screen computer control Temperature range from max. -18°C to + 45°C Humidity from 60% to 90% RH for max. 30 trays 600 x 800 mm or 60 trays 600 x 400 mm Cooling unit ready to plug in above Coolant R 134A / cooling capacity 937 watts PID regulation of humidity and temperature Rsdsk Iti Topfx Al Iot Water connection 3/4 inch stainless steel version Connection 400V, 4.4 kW, 16A-CEE plug Dimensions: 810 x 1030 x 2290 mm, WxDxH New device 12 months of warranty Option: - Door with thermal window - CO2 vaporizer - FlexBaker with ready-fermented products - Aggregate external Lillnord service partners

Year of construction: 2026, condition: new, functionality: fully functional, Robotic Grinding and Polishing Cell – CNC Control SINUMERIK ONE We offer a modern robotic cell designed for precise and efficient grinding and polishing operations using CNC control. An ideal solution for production automation and achieving consistent, high-quality surface finishes. Key features: Industrial robot with a 3000 mm reach Fully enclosed safety cell Control system Siemens SINUMERIK ONE HT2 operator panel 22" touchscreen interface for intuitive operation Programming and control: Programming via NC code (standard CNC) Shopfloor programming: ShopTurn ShopMill Capability to program using standard CAD/CAM systems Intuitive program creation directly on the machine – no CAM required Processing technology: High-performance grinding spindle PushCorp (power selectable based on application requirements) Rjdpfx Aloy D Nwto Iot Optional extensions: Integration of a rotary table (positioner) إمكانية إضافة linear axis to extend the working envelope Option to integrate a machining spindle with automatic tool changer (ATC) Fully customizable based on customer-specific applications Benefits: High repeatability and consistent surface quality Combination of robotics and CNC control in one system Flexibility for grinding, polishing, and subsequent machining in a single setup Wide range of programming options (NC, shopfloor, CAD/CAM) Easy operation thanks to shopfloor programming Ready for Industry 4.0 integration

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance Redpfox Imqlox Al Iot • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: ready for operation (used), Year of construction: 2018, operating hours: 400 h, overall weight: 34 kg, This 6-axis Universal Robots UR10e cell was manufactured in 2018. It features a load capacity of 10 kg and a range of 1300 mm. Weighing 33.5 kg, this robot arm is designed for tasks requiring precision and flexibility. Consider the opportunity to buy this Universal Robots UR10e cell. Contact us for more information. • Axes: 6 • Load capacity: 10kg Rjdpfx Aox Tkbfol Ist • Range: 1300mm • Repeat accuracy: +/- 0.05mm • Rotation: 6-axis

Condition: used, Ex-Cell-O XG620 Excello XG 620 Redpsurt Tlefx Al Ijt Siemens CNC overhauled 2011 docs available ball groove milling for CV constant velocity joints - homokinetic joints This machine can be inspected in our warehouse in Gussago BS Italy (Milan Area)

Year of construction: 2017, condition: ready for operation (used), Two welding cells are available, each with two KUKA robots, one for workpiece handling and one for the welding process. 1) Welding process: resistance spot welding, robot: 2x KUKA KR 60-3, max. payload: 60kg, max. reach: 2033mm, repeatability: +/-0.06mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 4500h/8200h. 2) Welding process: resistance spot welding, robot: KUKA KR300 R2500, max. payload: 300kg, max. reach: 2496mm, repeatability: +/-0.6mm, controller: KR C4, axes: 6, power source: Genius HWI 408, max. output current: 600A, rated power: 80kVA, cell dimensions X/Y: approx. 7450mm/5250mm, robot hours 1/2: 2700h/6100h. Documentation available. An on-site inspection is possible. Individual sale possible. Rjdpfsyv H Exjx Al Ijt

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Rodpfxowypqlj Al Ist Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, Vacuum pump, vane pump, rotary vane pump ALCATEL type 100-132 No. 173082 - 3101 Year of construction: approx. 1995 Volume flow: approx. 50 m3/h Vacuum: 0.5 mbar (specification on the nameplate) Negative pressure: - 0.9 bar (determined during test run) Engine power: 3 kW Engine speed: 1420 rpm. mains connection: 400 Volt, 50 Hz - Oil lubricated rotary vane pump Dimensions L x W x H: 700 x 420 x 310 mm Weight: 78 kg Rsdpfx Alod A Srge Iot sound condition

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, load capacity: 10 kg, arm reach: 1,418 mm, controller manufacturer: FANUC, controller model: R-30iB Plus, input voltage: 230 V, type of input current: AC, repeat accuracy: 0.05 mm, warranty duration: 6 months, Equipment: documentation/manual, Mobile automation cell GEWA "RoboFlex 10", consisting of: - FANUC CRX10iA Rsdpfx Alsxrknms Ijt - R-30iB Plus Controller - Tablet Teach Pendant - BASIC base frame incl. 5 grid positions - without gripper (optionally available) The cell is located with us in the Eifel region and can be inspected under power by appointment. OPTIONAL: Connection of RoboFlex to your machine tool - Configuration of automation interface - Installation and commissioning - Operator training (2h) - Test run and handover to customer We are happy to provide you with an individual offer upon request.

Condition: not inspected (used), Year of construction: 2016, functionality: unexamined, type of input current: three-phase, overall weight: 450 kg, input voltage: 400 V, total length: 2,500 mm, total height: 1,520 mm, total width: 1,900 mm, Automotive assembly machine with Grimm vibratory feeder and sensors Rsdpoy Hf Dzsfx Al Ist Manufacturer: GRIMM Year of manufacture: 2016 Drive motors: 4 pcs VEM motors with frequency inverter and gearbox Total motor power: 2.6 kW Speed control range: 10–100 % Conveyor roller diameter: 85 mm Conveyor roller length: 720 mm Pneumatics: FESTO Control system: GRIMM Frame structure: BOSCH profile Machine dimensions: length 2.5 m, width 1.9 m, height 1.52 m Weight: approx. 450 kg

Condition: excellent (used), Dear Sir or Madam, We are pleased to offer you a manufacturing cell in very good used condition. The set comprises a total of 4 machines: Redpfxoyrypzj Al Iot – Traub TNL 26 – Gildemeister GD 32 – Star SV-20 – Star SR-32 including all relevant documentation, extraction systems, and accessories. Please feel free to contact us for a quotation.

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: 2735636, total height: 2,300 mm, total width: 2,230 mm, total length: 4,000 mm, overall weight: 3,500 kg, Equipment: cabin, Reis Robotics Welding Robot Cell SRV6-C (Year of Manufacture: 2003) Complete system comprising robot, positioner, and power source Robot – Reis SRV6-C Type: SRV6-C Manufacturer: Reis Robotics Year of manufacture: 2003 Robot weight: 200 kg ID no.: 2735636 Commissioning no.: 52 1050 Axes: 6 Typical application: MIG/MAG welding Positioner – Reis RND01 (Turntable) Type: RND01 Manufacturer: Reis Robotics Rodpfxeyubyge Al Ijt Year of manufacture: 2003 Commissioning no.: 52 1050 Machine weight: 300 kg Function: Single-axis turntable / welding positioner Application: Holding and rotational positioning of welding jigs/fixtures Control: Integrated with the robot control system Control cabinet of the cell Type: SRV6-C Manufacturer: Reis GmbH & Co Maschinen-Fabrik Year of manufacture: 2003 Electrical connection: Voltage: 3~ 220/400 V Frequency: 50 Hz Connected load: 3 kVA Fusing: max. 5 A Pneumatics: Pmin: 5 bar Pmax: not used as per nameplate (no hydraulics present) Control cabinet weight: 125 kg Welding power source – Fronius TransPuls Synergic 4000 (TPS 4000) Manufacturer: Fronius Model: TransPuls Synergic 4000 (TPS 4000) Process: MIG/MAG / Pulsed arc / Synergic programs Compatible with Reis robot controllers Accessories: Torch kit Hose assembly Cooling circuit (external tank visible) Dimensions: 4.0 × 2.23 × 2.3 m (Robot welding cell in closed design) Operating hours counter: 29,593 h

Year of construction: 2013, condition: used, Number of machnines 4 St Control Siemens Tool changer 1 Pos Plant Consists of 4 Machines Soraluce FR 9000I Soraluce RR 9000II Soraluce FP 8000 Soraluce PM 6000 Workpiece Setup Stations Replacement Pallets Automatic Tool Supply System (WBG) Automatic Pallet System Pallet Storage Rack Rsdpfoyr Skksx Al Ist The technical data is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. About Us More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, This listing is for a Merck Millipore Scepter 3.0 Automated Cell counter The unit is in full working condition and is ready for immediate release The Scepter™ 3.0 Cell Counter is the only automated cell counter that's both portable and handheld. This compact device brings the accuracy and consistency of Coulter impedance counting directly to your culture hood, eliminating the need for bulky benchtop equipment. While traditional automated counters rely on vision-based systems, object recognition software, manual focusing, and clunky loading chambers, the Scepter™ 3.0 avoids all of these issues. It offers true automation without the risk of human or software error. Featuring a microfabricated, precision-engineered sensor, the Scepter™ 3.0 handles all aspects of cell assessment and calculation, delivering accurate and reliable counts in under 30 seconds. Features: Handheld, portable, and ergonomic design Rsdpfsxv D Dpox Al Iot Uses the Coulter Principle for precise, reproducible results Compatible with two sensor sizes (40 μm and 60 μm) Displays cell concentration, average size, average volume, and histograms Stores up to 999 counts for PC download and further analysi

Condition: used, This listing is for a Instron 2518-807 Tension/Compression Static Load Cell. The unit is in full working condition and is ready for immediate release. The Instron 2518-807 Tension/Compression Static Load Cell is engineered for high-precision force measurements in a variety of testing applications. Its robust design allows for accurate tension, compression, cyclic, and reverse stress testing, making it an essential tool in materials testing and quality control environments. Key Features: Capacity: Measures up to 100N (22 lbf), making it suitable for a wide range of testing scenarios. Exceptional Measurement Range: Capable of capturing accurate force measurements down to 1/500th of its capacity, ensuring precision in all applications. Automatic Recognition: Features an electronic serial number and electrical calibration, allowing for simple and error-free operation without the need for manual setup. Integral Overload Protection: Designed with overload protection to minimize the risk of damage during both handling and testing, enhancing durability and reliability. Tare Weight: Offers a tare weight capability of 40% of the force capacity, which accommodates the use of various grips and fixtures for added versatility. Compliance with Standards: Fully compliant with international force measurement standards, including ASTM E4, ISO 7500-1 class 0.5, and JIS B7721, B7733, ensuring reliability and accuracy in testing protocols. Compatibility: The Instron 2518-807 load cell is compatible with various Instron testing systems, including the UT and 3300 series. Its versatility makes it ideal for applications in: Redpfxjxxzndo Al Iot Materials Testing: Perfect for assessing the mechanical properties of materials under tension and compression. Quality Control: Utilized in industrial settings to ensure product consistency and adherence to specifications. Research and Development: An essential tool for scientists and engineers conducting experiments on material behaviour under different loads.

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Qty 2 in stock Capacity 500 LTS Load cells Rsdpfx Alowq Sz Us Iet Mixer Ancillary equipment included