Used Brass Tubes for sale (2,343)

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Bdjdpfx Abjpu R Nvjusi Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: used, This listing is for a Qiagen Biorobot 8000 Tube Holder STS MDx 9mm box of 14 Bdedjxzg N Sspfx Abusi

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 Bodpjykl Rzjfx Abuodi max. bending diameter: 63.5 mm smallest bending radius: 32 mm motor: 30 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00 Bedpfsyvhl Hjx Abujdi

Condition: used, Year of construction: 2002, Offered is a vacuum tube lifter with pillar-mounted jib crane. Maximum load capacity: 85kg. Weight of the lifting unit: 63.5kg. Equipped with a vacuum lifting unit, ergonomic control unit with handle, vacuum gripper, vacuum supply hose, side channel blower with filter, as well as a pillar-mounted jib crane with jib arm and movable suspension. Inspection possible by arrangement. Bsdpfx Abs Afpl Usuedi

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels, but without bending shoes: Ø 28, 2 x 38 + 42 mm Bjdpfx Abjwnrt Ssujdi Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel / Germany

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Bdsdpfxezrt Uij Abuji Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, pipe diameter (max.): 210 mm, pipe length (max.): 6,000 mm, workpiece weight (max.): 800 kg, input voltage: 400 V, type of cooling: water, overall weight: 5,000 kg, total length: 12,000 mm, total width: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, FOR SALE: High-Precision 3000 W Fiber Laser Tube Cutting Machine (6 m) Industrial-grade 3 kW tube laser equipped with a side-loading system, a premium IPG YLS 3000 laser source, and a German LT Ultra bevel cutting head. A powerful and versatile solution for cutting round, square, rectangular, and oval tubes, as well as special profiles, with bevelling up to 45°. Machine origin & key details Loading system: side-loading Year of manufacture: 11/2017 (commissioned in Finland in 2018) Laser source: IPG YLS 3000 – 3000 W fiber laser, manufactured in the USA Bevel cutting head: LT Ultra-Precision Technology, manufactured in Germany Bjdjzuf Dhspfx Abusdi Filtration: Welldone dust collector and filtration unit Key highlights Versatile tube profiles – round, square, rectangular, and oval tubes, plus open and custom shapes 3D bevel cutting – integrated bevelling up to 45° for high-precision weld preparation High speed & accuracy – max. operating speed 100 m/min, acceleration 1.0 G, positioning accuracy ±0.03 mm Heavy-duty capacity – tubes up to 6 m in length, max. load 800 kg Technical specifications Parameter Specification Laser power 3000 W (3 kW) Laser source IPG YLS 3000 (manufactured in the USA) Bevel cutting head LT Ultra-Precision Technology (manufactured in Germany) Filter / dust collector Welldone Loading system Side-loading Year of manufacture 11/2017 (commissioned in Finland 2018) Max. material length 6000 mm (6 m) Round tube diameter Ø 20 – Ø 210 mm Square / rectangular tube size 20 × 20 mm – 150 × 150 mm (any side) Bevel cutting angle ≤ 45° X/Y positioning accuracy ±0.03 mm X/Y repeat positioning accuracy ±0.02 mm / 1000 mm Cutting gap width 0.1 – 0.2 mm Max. operating speed 100 m/min Max. acceleration 1.0 G Max. loading capacity 800 kg Machine weight 4000 kg Machine dimensions (L × W × H) 12 000 × 2500 × 1900 mm Gross power < 40 kVA Power supply 380 V ±5 %, 50 Hz Operating temperature / humidity 0 – 40 °C / < 90 %

Condition: good (used), functionality: fully functional, Hydraulic tube end forming machine BLM (Italy) Bdodpfozzwpvex Abuji for tubes, up to 6 tools (5 follow-up tools) can be interchanged for forming Drive power: 7.5 kW Max. tube diameter: approx. 40 mm Max. forming length: 100 mm Weight: approx. 1.4 tons

Condition: used, Tube end forming machine,Spiro Pneumatic Tube Notching Machine / Assembly Stand, Spiro Manual Tube Notching Machine, Used Machine Technical Specifications Manufacturer: Spiro Development AB (Made in Sweden) Bdodpfx Ajzwxwgebusi Year of Manufacture: 2008 Type: Manual Tube Notching Machine (with pneumatic assistance) Frame Construction: Heavy-duty aluminium machine-building profile frame Operation: Foot-switch-controlled pneumatic operation Design: Adjustable-height and adjustable-distance tube support stand for convenient positioning and machining of long tubes Overall Dimensions Width: 2350 mm Depth: 930 mm Height: 1450 mm

Condition: excellent (used), Year of construction: 2008, operating hours: 1,000 h, machine/vehicle number: CA520SR--10691, Max.tube diameter 20mm Min.tube diameter ---- Max.bending radius 60mm Min.bending radius 16mm Max.tooling height ---- Min.tooling height 30mm Working height 1290mm Length 1600mm Width 910mm Bsdpfxoitcr Ro Abujdi Height 1520mm Weight 1250kg Tube loader, belt conveyor and safety fence are included.

Condition: ready for operation (used), Year of construction: 2011, A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible. Bedpfxeytgpdo Abuedi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: M961287, overall weight: 17,000 kg, Herber 127 CNC in very good condition. The control system has been upgraded to "WinBoHerber". Year of manufacture: 1996 Capacity: Ø 127 x 5 mm Radius: min./max. 80/400 mm Bending speed / repeatability: 40°/s; ±0.1° Bjdj Aax Uzjpfx Abujdi Mandrel length: 4,000 mm Weight: 16,000 kg Machine dimensions: 7.0 x 2.2 x 1.8 m Motor: 40 kW Longitudinal feed: 900 mm/s Tolerance range: 0.05–0.1°/mm Tools are also included in the scope of delivery. Ø 50, radius 101.6 mm, folding smoother. On request, we also offer installation and training.

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets Bdodpfxsu Ibvuj Abuei -div. auxiliary and clamping devices *

Year of construction: 2021, condition: like new (used), functionality: fully functional, High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. Bdodpjwr Ul Sofx Abuei manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Used scaffolding tubes – heavy-duty steel, various lengths Large quantity of used steel scaffolding tubes with a standard diameter of 48.3 mm. The tubes come from professional use and are in good technical condition, with normal signs of wear. Suitable for scaffolding construction, temporary structures, fencing, support, event construction, and various other applications. Specifications Type: Scaffolding tube / construction tube Diameter: 48.3 mm Material: Galvanized steel Condition: Used Stock location: Andelst, Gelderland Sale: Per length or per batch Bedpfo Aawumjx Abujdi Available lengths: 1.00 m 2.00 m 3.00 m 4.00 m 5.00 m 6.00 m Other lengths available upon request Advantages Robust industrial quality Suitable for outdoor use Large quantities available in stock Suitable for various coupling systems Available per length or larger batch Suitable for export and resale Application Widely applicable for scaffolding construction, fencing, temporary structures, support, event construction, and other professional applications.

Condition: ready for operation (used), Year of construction: 2024, Cutting range round: 12-273mm, square: 12-200x12-200mm, rectangular diagonal: less than or equal to 273mm, profile cutting: U-, L- and H-profiles with flange lengths less than or equal to 180mm, maximum weight of a single tube: 200kg, remnant length (tailing): greater than or equal to 150mm, maximum manual loading length: 7100mm, maximum acceleration: 1.2G, maximum travel speed: 120m/min, positioning accuracy: +/-0.03mm/m, machine dimensions (with loader): 12,500x4,700x2,600mm. Equipment: Raycus 3 kW laser source, HSG Blade laser cutting head, Rexroth/SANYO DENKI/Inovance servo motor, Shimpo rack-and-pinion drive, linear guide, HSG machine platform, HSG automatic self-centering chuck, HSG X9000 control system, TTN nesting software, MOOXEE/Lanny proportional cutting gas valve (6kW), water chiller and installation kit, with documentation. The machine has not been used and an on-site inspection is possible. Bedpfx Aozpyw Sebusdi

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bdjdpot Dk Ukjfx Abuji

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles Bdsdoy N Rbwspfx Abusi *2. Indicative capacities on MCP series* DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: new, Year of construction: 2026, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Bsdpfx Aovk Scgjbujdi Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: good (used), Year of construction: 1995, Buigmachine voor buizen van MARK / Ridgid Type: 2H B Bdjdjzulzgopfx Abuei Zonder gereedschap

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BR-BTRS-100-250003, As-new Brinkmann Technology BTRS100 screw conveyor, year of manufacture 2025, equipped with control unit, flushing valves, adapter pieces, adjustable motor power, and Easy-Clean cleaning package. We have only tested the screw conveyor. Due to a change in technology, it has never been put into operation. Manufacturer: Brinkmann Technology GmbH Bodsytql Nepfx Abusdi Year: 2025 Type/Model: BTRS100 Designation: BTPS100 pipe screw conveyor Serial number: BR-BTRS-100-250003 Power: 1.5 kW Original price: €13,000 (net) Further documents (technical drawings, operating manual, invoice, etc.) available upon request. If you have any questions or require more information, feel free to send us a message or call us.

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s, ±0.05° Tube length ----- 1,350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0–850°/sec Length feeding ----- Standard: 0–2,400 mm/sec Bedjga T Exepfx Abujdi Booster ----- 0–1,200 mm/sec Degree of tolerance ----- 0.05°/mm Bending head rotation ----- 0.75 sec Standard components comply with VDMA, ISO, and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with freely programmable robot or loading arm * Weld seam detector and tube positioner with electromagnetic or optical detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: good (used), Year of construction: 1978, control type: manual, actuation type: hydraulic, pipe diameter (max.): 33 mm, tube wall thickness (max.): 2 mm, working height: 800 mm, total length: 1,850 mm, total width: 1,000 mm, total height: 1,000 mm, power: 1.5 kW (2.04 HP), Conventional tube bending machine, with various bending tools Ø 20 ... 33.7 mm + 4KT 25x25 mm Bedpfx Abeyr Rx Heujdi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, Equipment: CE marking, documentation/manual, Ercolina Profiling Machine Bdeds Af Iqdspfx Abuei Model: CE40MR3 Year: 2002 Complete documentation Condition: Used, excellent condition, ready for use Included accessories: None Shaft diameter: 40mm