Used Brass Tubes for sale (2,356)

Condition: used, This listing is for a Hettich EBA 12 Centrifuge. The unit is in full working condition and is ready for immediate release. The Hettich EBA 12 Centrifuge is a laboratory centrifuge designed for separating substances or mixtures with a maximum density of 1.2 kg/dm³. It is suitable for various applications, including serology, cell washing, and pelleting particles from suspension. Technical specifications Voltage: 220-240V, 50 / 60Hz Current: 2,2A Power: 350W Maximum speed: 18000 rpm Technical specifications rotor Rotor number: 1118 Bodjxx Akgspfx Aiwsww Maximum rotor speed: 5000 rpm Dimensions tubes (∅) x (H): 1.5 x 6.5 cm External dimensions (W) x (D) x (H): 27 x 32 x 25 cm

Condition: used, Giddings & Lewis 48 Inch CNC Vertical Borer Fanuc 18i-t control 48 inch hydraulic chuck Approx 1.5m under rail to table. Hydraulic turret Swarf conveyor Bwsdpoymc N Hofx Aiwow Recent full machine service including; removing Timken bearing and sending for preload test, full refurbishment of oil lube system including replacement of brass oil outlets on table.

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Bwjdpfx Aexzg Eyoiwjw Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Condition: used, This listing is for a Qiagen QIAsymphony SP Sample Preparation Fully-Automated DNA RNA Purification Very good working and cosmetic condition The QIAsymphony SP is a versatile nucleic acid purification instrument providing high-quality nucleic acids compatible with with most common downstream assay technologies, such as real-time PCR, digital PCR, and next generation sequencing (NGS). The large range of a dedicated QIAsymphony kits enables optimized purification of genomic DNA, cell-free circulating DNA, RNA, bacterial and viral nucleic acids from a wide range of starting materials Features: Bjdpfx Asxzg Nxjiwoww Purification of high-quality genomic DNA, pathogen DNA/RNA, cell-free circulating DNA and cellular RNA 1-96 samples in 4 batches, from smallest forensic samples to 10 ml sample volumes Standardized protocols for diagnostic, routine, research and forensic applications Flexible loading of new samples during a run Protocols customizable (protocol steps, labware, etc.) on demand Traceability and LIMS compatibility Compatible with most commonly used sample tubes and elution tubes and plates Compatibile with QIAsymphony DSP kits for diagnostic workflows. Specification: Minimum input volume: 200µl Elution volume: 30-500µl Dimensions: 128 x 103 x 73cm (w x d x h) Weight: 175kg Electric supply: 100 - 230VAC 50/60Hz

Condition: used, This listing is for a Fisons Whirlimixer Cyclone Vortex Mixer For rapid and efficient mixing, the Whirlimixer® is far superior to hand shaking. The mixer creates a vortex in the tube which gives the highly effective mixing action. Contamination from stirring rods and stoppers is eliminated and different samples may be subjected to the same degree of mixing, thus improving repeatability of results. Fitted with an automatic press-start operation, providing instant action the moment the tube is pressed into the rubber cup. This feature is particularly useful where repetitive mixing is undertaken. Offers variable speed control, with the advantage of controlled mixing over a wide speed range. This allows for very slow, gentle mixing which is necessary in many applications, articularly where damage to cell structure must be avoided. The unit may be set for continuous running at the chosen speed or on demand by inserting the tube into the cup. The skirted rubber cup helps prevent liquid entering the mixer's casing. Accepts vessels up to 25mm diameter. Excellent stability is achieved through a combination of weight and non-slip feet. Electrical supply 230V, 50Hz Dimensions (w x d x h), mm 160 x 160 x 145 Bedpjxzh Ddofx Aiweww

Condition: good (used), Year of construction: 1985, Cold circular saw Eisele VMS III S.PV Saw blade feed: manual Vise Saw blade diameter max.: 350 mm Miter cuts from 90-30 degrees Cutting capacity (straight cuts): Flat profiles: 200 x 90 mm Bjdpfjiyzccsx Aiweww Pipes: 120 mm diameter Square tubes: 90 mm Solid material: 100 mm Cutting capacity (miter cuts): ◾Flat profiles: 140 x 90 mm Pipes: 120 mm diameter Square tubes: 90 mm Solid material: 100 mm Rotational speeds: 34/68 RPM

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 207646, high-pressure hose length: 10,000 mm, pressure: 150 bar, input voltage: 230 V, The Kärcher HD 5/15 C Plus cold water high-pressure cleaner is a display unit in near-new condition. The compact, lightweight, and versatile HD 5/15 C Plus cold water high-pressure cleaner stands out with excellent mobility and is suitable for both upright and horizontal operation. The unit features ingenious accessory storage, and its brass cylinder head and automatic pressure relief ensure a long service life. At the same time, it impresses with innovative new developments that sustainably increase user comfort by allowing fatigue-free operation and quick setup and packing. The EASY!Force high-pressure gun makes use of the recoil force from the high-pressure jet to reduce holding force to zero, while the EASY!Lock quick-release fasteners provide handling up to five times faster compared to conventional screw connections, without compromising robustness and durability. Overall, a well-designed package that ensures outstanding cleaning results with high convenience and long service life. Technical data: Voltage: 230V Connection power: 2.8 kW Working pressure: 150 bar Bwsdeyzni Nspfx Aiwew Power cable: 5 meters

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension, Beavertail rear, Ramp Equipment: - Spare wheel - Shovel holder - Loading ramp Net: €5,621.85 / Gross: €6,690.00 Article number: VB4235401810.02 Technical data: • Brand: Variant • Model: 3518 B4 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 30 cm • External dimensions (L x W x H): 600 x 234 x 168 cm • Loading height of the floor: 30 cm • Permissible total weight: 3,500 kg • Tare weight: 815 kg • Payload: 2,685 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced aluminum diamond-plate fenders, walkable • Lateral grid steps, non-slip • Screen-printed plywood floor, 18 mm, non-slip and waterproof • Extremely stable, welded grid tube frame • Frame completely hot-dip galvanized • Steel loading ramp, upright on shaft, 130 cm Bodjyyw N Ajpfx Aiwsww • Stable eccentric locks • Support blocks on loading ramp • Very low chassis for a low loading angle • Beavertail rear / low loading for work platforms and excavators • Excavator bucket holder at the front • Spare wheel, mounted under the excavator bucket holder • 10x lashing eyes mounted in the outer frame (1000dAN/kg) • 8x lashing points on the inside • Parabolic axle from KNOTT • Parabolic axle for absolute heavy-duty use • Reverse automatic • KNOTT inertia brake and parking brake • Lockable tow hitch • Spare wheel, mounted under the excavator bucket holder • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear marker lights at the rear with rubber arm • Heavy-duty support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, This listing is for the Thermo Scientific 1blck Drybath Standard 1/12 Block The unit is in full working condition and is ready for immediate release Bwjdpfxjy Iw D Ne Aiwsw The Thermo Scientific Drybath Standard 1-block is a laboratory dry bath/block heater designed to provide precise, controlled heating for a variety of sample tubes using a removable heat block. It’s widely used in molecular biology, biochemistry, and general lab workflows where incubation or heating of tubes at set temperatures is required.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Bjdpfjy Hlvwox Aiwsww Condition – Fully operational.

Condition: used, This listing is for the Grant QBT1 Heat Block Bwodpjx S H D Hjfx Aiwow The unit is in full working condition and is ready for immediate release The Grant Model QBT1 Dry Block Heater With 24x10.5mm Well Block is a compact dry block heater designed for laboratory temperature-controlled heating of small sample tubes. It’s part of Grant Instruments’ dry block heater family, used widely in molecular biology, biochemistry and general lab work for consistent incubations or reactions in tubes A dry bath / heat block heater that provides precise, stable heating for tubes (especially 1.5 mL Eppendorf-style tubes), without using water or oil baths. The heat is delivered through a removable aluminium block tuned to fit a specific tube format — in this case typically 24×1.5 mL tubes

Condition: used, This listing is for Watson Marlow 323 Peristaltic Laboratory Pumps Bsdeygmdhspfx Aiwoww Each unit is in full working condition and is ready for immediate use The Watson-Marlow 323 is a peristaltic laboratory and process pump designed for precise, controlled fluid movement, dosing and metering of liquids in scientific, pharmaceutical, biotechnological and industrial environments. It works by mechanically squeezing a flexible tube in a circular “rolling” action — this moves the liquid without it ever contacting internal pump parts, which reduces contamination and wear

Condition: new, General information Year of manufacture: 2026 Reference number: 2 Weights Empty weight: 3.700 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 33-50ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST+ Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVH40ST+ is availbale with 3 types of changeable side clamps! AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Bwodpsym Abvofx Aiwsw Excavator: 33-50TON Weight: 3400 kg (without mounting cap) Working pressure: 250~ 270Bar Oil flow: 180-240 l/min Centrifugal Force : 1000kN Frequency: 2700 rpm Eccentric moment: 10 kgm AVH40ST+ is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H/I-Beams, solar pile, and therefore cheaper, safer, quicker than traditional Pile Drivers.AVH40ST+ is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Bodpfxexz Dqms Aiweww Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, lifting height: 1,350 mm, load capacity: 1,000 kg, total length: 2,500 mm, total width: 600 mm, working height: 1,350 mm, roll diameter: 50 mm, operating pressure: 200 bar, power: 1.1 kW (1.50 HP), lifting time: 15 s, construction width: 600 mm, roll spacing: 150 mm, roll width: 550 mm, segment length: 2,500 mm, Scissor lift table, WTT Fördertechnik, Series E 10.10.5.1.0.RB, Roller conveyor length: 2500 mm Platform width: 600 mm (rollers 550 mm) Load capacity: max. 1000 kg Useful lift: max. 1350 mm Total: 7 units Sold individually Bjdjv Acnkspfx Aiweww Equipped with non-driven support rollers made of precision steel tube, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Installation length of the support rollers (width): 550 mm Roller conveyor height in the transfer area: 280 mm Lifting time: approx. 15 sec. Foot protection contact strips Hand-held switch on a 3 m long cable Automatic stacking protection - by slightly lifting the platform, the support rollers are automatically braked. Foldable inspection supports Built-in hydraulic unit: 1.1 kW, 200 bar Operating voltage: 400 V, 50 Hz (Subject to changes and errors in the technical data, as well as prior sale)

Condition: used, Year of construction: 1992, Technical details: tube diameter: 6 mm tube diameter max.: 16 mm bending angle max.: 90 ° electrics - voltage/frequency: 220 / 50 V/Hz Total power requirement: 0,75 kW Weight approx.: 0,145 t machine dimensions LxWxH: ca. 1,0 x 0,8 x 1,2 m Application: Mini tube bending machine with free bending head. Processing of precision steel tubes according to DIN 2391/C, material 35.4 NBK Ø 6 - 16mm. -With hydraulic drive -8-fold bending preselection angle up to 180 -Pipe stop length 1m -Emergency stop button -mobile with parking brake -pivoting pipe head (vertical in horizontal position) -required hydraulic oil = approx. 20 liters (e.g. Esso Nuto 32) Accessories: various bending tools * Bjdpfowivn Nox Aiwoww

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Bwedewwmkdopfx Aiwjw Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)

Condition: used, Year of construction: 2021, Working area 3000 x 1500 mm Max. laser capacity 4 Kw (TruDisk 4001) Max. thickness 25/20 mm (Mild steel/Stainless steel) Integrated camera for process surveillance (with monitor interface) Control: Siemens Sinumerik 840 D SL with 18” touch screen Bodpfxjxr U U Rs Aiwjww Automatic speed regulation Programmerbel automatic shut down of the machine Kobber cutting package Brass cutting package Equipped with: Automatic pallet changer Price when bought in 2021: Euro. 365.000

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZTF01, Equipment: CE marking, The fully automatic tube filling and sealing machine is a highly automated device for filling and sealing cylindrical metal tubes or composite tubes with paste materials. It adopts SS304 piston pump to fill the paste materials driven my servo motor, that meets GMP standards, and high accurate in filling. It uses PLC programmable control and a photoelectric identification mechanism for accurate and reliable trademark positioning; it uses frequency conversion speed regulation, a composite opening mechanism for indexing and positioning, and is equipped with the latest international folding and sealing mechanism.Widely used in cosmetic, chemical, adhesive and food industries. Bodpjxum Alefx Aiweww

Condition: used, This listing is for 1 of 2 Thermo Scientific Multi Blok heater 2050 1CE The unit is in full working condition and is ready for immediate release. The Multi Blok Heater is a laboratory heating device used to heat samples in tubes, vials, PCR plates, etc., by conduction via a metal block, rather than using a water bath. “2050” is the model number, while “1CE” (or “1CEQ”) denotes a single‑block, CE‑certified version suited for use with one interchangeable modular block. Bsdjxv Aduepfx Aiwoww The device is compact and bench‑top, intended for fixed temperature incubations, sample pre‑heating, enzyme reactions, and other lab protocols where stable heat is required.

Year of construction: 2014, condition: used, This listing is for a Full Mueller PyroPure WFI System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This system is in immaculate condition as the sites steam requirements were “Turned on Time”of the Steam Generator's is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The Mueller PyroPure WFI System stands out as a high-performance, integrated solution for the pharmaceutical and biotechnology industries, focusing on the production, storage, and distribution of ultra-high-purity Water for Injection (WFI). Below is an in-depth look at its components, capabilities, and specifications. Key Components 2x Mueller P7310 Pure Steam Generator High Capacity: Generates from 0 to 700 kg/hr of pure steam, suitable for high-volume operations. Operational Flexibility: Can operate alternately with another unit of the same model, maximizing efficiency and reducing downtime. Regulatory Compliance: Meets USP WFI standards, ensuring suitability for pharmaceutical applications. Maintenance-Friendly Design: Features an external evaporator for easy access and servicing, minimizing contamination risks. Advanced Control: Equipped with an Allen Bradley Compact Logix PLC and an intuitive operator interface terminal (OIT) for real-time monitoring and control. Safety Mechanisms: Includes pressure relief valves and temperature controls to ensure safe operation. Energy Efficiency: Designed to optimize energy consumption, especially when alternating operations between units. Durable Construction: Made from high-quality stainless steel for longevity and hygienic conditions. 1x Mueller P4003 Pure Steam Condensing System Condition: This unit is in full working condition and ready for immediate release. Installed new in 2015 by Freestead Process Technology. Capacity: Produces 100 gallons per hour (379 litres per hour) of WFI-quality distillate, with a pure steam inlet capacity of 807 lb/hr (366 kg/hr). Compliance: Meets stringent USP WFI standards, is CE marked, and FDA compliant with 3.1B material certification. Core Features: Utilizes a tangential nozzle design for superior impurity separation. Drainable components to minimize contamination risks, with electro-polished 316/316L stainless steel ensuring hygienic operation. Easy maintenance due to a removable tube bundle in the condenser and minimal instrumentation, requiring just 24 inches of clearance for service. 1x Ormandy Newade WFI Storage Vessel Condition: This 2000L WFI storage vessel is also in full working condition, installed in 2015 by Freestead Process Technology. Capacity: Perfectly balances storage efficiency for mid-sized operations with its 2000 litres capacity. Design Flexibility: Available in both horizontal and vertical configurations, customisable based on specific facility layouts. Material Excellence: Made from high-grade austenitic and Duplex stainless steel, ensuring durability and resistance to corrosion. Compliance: Adheres to key industry standards such as PD5500, ASME VIII, and EN 13445, and is CE marked under the Pressure Equipment Directive. Bjdpfx Asxv Af Eoiwoww 1x Fristam FPE742/185A Centrifugal Pump Condition: This robust 5.5KW sanitary pump is operational and ready for immediate use, also installed in 2015 by Freestead Process Technology. Hygienic Design: Features close internal clearances (as ...

Condition: used, This listing is for a Watson Marlow 530S Peristaltic Pumps The units are in full working condition and ready for immediate release. Overview & Function The Watson‑Marlow 530S is part of their 500 series cased peristaltic/process pumps. Industrial Provider It’s used for precise fluid metering, dosing, or transfer in laboratory, industrial, pharmaceutical, food & beverage, water treatment, and other process environments. As a peristaltic pump, it works by compressing a flexible tube (or tubing element) with rollers or shoes, pushing fluid forward while the fluid never contacts moving mechanical parts (only the tubing). This gives isolation and reduces contamination risk Because fluid only contacts tubing, the risk of contamination or cross‑contamination is low, and maintenance is relatively straightforward (replace tubing / elements). Very good turndown ratio (i.e. ability to dial down flow finely) thanks to the wide speed control range. Bwedpfx Aoxv Ak Ieiwsw The user interface is designed for operational simplicity and clarity. Offers flexibility in control: it supports analog and digital remote control, SCADA integration, and bus communication. Ability to use different pumpheads and tubing materials to suit pressure, chemical compatibility, and flow requirement

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Bedpfoxv A T Njx Aiwjww Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: used, This listing is for the Restek Single Position Base Plate Gas Filter Kit + SGT Gas Filter Kit The unit is in full working condition and is ready for immediate use The Restek Single Position Base Plate Gas Filter Kit is a modular system designed for gas purification in laboratory applications, particularly in gas chromatography (GC) and mass spectrometry (MS) systems. Key Features Baseplate Design: The single-position baseplate (catalogue number 22025) is constructed from brass and measures 10.2 × 10.2 × 4.8 cm. It is compatible with all standalone Super Clean gas filters Filter Cartridges: Restek offers various filter cartridges, such as the triple filter that removes oxygen, moisture, and hydrocarbon impurities, and the fuel gas filter designed for moisture and hydrocarbon removal. Fitting Compatibility: The baseplate accepts 1/8" tubing. To adapt to 1/4" tubing, 1/8" to 1/4" tube end reducers are available. Bwedpfx Asxv Dk Neiwew Material Options: End fittings are available in brass or stainless steel, allowing for customization based on application requirements Restek SGT Superclean Gas Filter Kit The Restek SGT Superclean Gas Filter Kit is a high-purity gas purification system designed to remove contaminants such as moisture, oxygen, and hydrocarbons from carrier and fuel gases used in gas chromatography (GC) and mass spectrometry (MS). This kit is particularly beneficial for applications requiring ultra-pure gas supplies to ensure accurate and reliable analytical results. Key Features High-Purity Output: Delivers gas purity levels exceeding 99.9999%, depending on the incoming gas quality and flow rate. Versatile Compatibility: Compatible with various gas types, including inert carrier gases, air, hydrogen, and helium. Quick-Connect Design: Features a user-friendly quick-connect system for easy and leak-free filter cartridge changes. Durable Construction: Constructed with a glass interior to prevent diffusion and a polycarbonate exterior for safety. Visual Indicator: Each filter cartridge includes an easy-to-read color change indicator to signal when replacement is necessary.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head Bjdpsrkntcefx Aiwjww OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer