Used Brevini Gear Planetary Gear for sale (13,116)

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Crodpjxltu Njfx Adaoi

Condition: good (used), Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor Crjdpfx Adet Ddd Ssaoi -Type: SK 62-180 L/4 i 11.59 -Speed: 127 rpm -Engine: Nord Type SK 180 L / 4 -Power: 22.0 kW / 1450 rpm -Protection class: IP55 -Shaft: Ø 65 x 130 mm -Dimensions: 1030/430/H425 mm -Weight: 243 kg

Condition: excellent (used), Gear motor Flender MBH 125CC-B 27.7/1 Helical bevel geared motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 Cedpek E Htcofx Adaeri were operated with frequency converters Suitable frequency inverters Walther Flender ZZ0103069.34003 Sinus Penta available Altogether 15 geared motors and 12 pieces frequency inverters available !!! Very good condition, directly from production!!!

Condition: used, Gleason No 24A Complete with change gears. Cedpfew A Rytox Adasri "CONIFLEX" STRAIGHT BEVEL GEAR GENERATING MACHINE COMBINATION ROUGHER/FINISHER, SUITABLE FOR "GENERAL JOBBING" PRODUCTION OF STRAIGHT BEVEL (CONIFLEX/CROWN) GEARS UP TO 35.5 (901MM) PITCH DIAMETER, (AT 10:1 RATIO), 6" (125MM) FACE-WIDTH, WITH CUTTING CAPABILITY UP TO 1.25 DP (20.4 MODULE) Specifications Manufacturer GLEASON Model 24A Condition Used Serial Number 637001.0 Stock Number 28603 Longest cone distance (1 3/4" stroke) 18" (457MM) Shortest cone distance 0" 10 to 1 ratio 35.5" (901MM) 2 to 1 ratio 31.75" (805MM) 1 to 1 ratio 25" (635MM) Minimum pitch angle 5.42 DEGREES Extreme ratio 10 TO 1 Maximum pitch 1.25 DP (20.4 MODULE) Maximum pitch angle (shafts at 90 degrees) 84.18 DEGREES Maximum face length 6" (152MM) Diameter (large end of taper) 6" (152MM) Taper per foot .75" (18MM) Depth of taper 6" (152MM) Diameter of thru bore 5” (127MM) Spindle nose to machine center 5”-26” (127-660MM) Cutter speeds (strokes per minute) 22 TO 170 Feeds (seconds per tooth) (22 feeds) 23 TO 645 Floor space required 74" X 105" (1880X2660MM) Machine net weight 24,400 LBS. (11,295 KGS)

Condition: like new (used), Specifications Manufacturer GLEASON Model 104 Condition Used Serial Number 631406 Stock Number DCN1749 Max working diameter 432 mm Module max 8,5 Description Equipped with Csdpfxsxtpk As Adasri change gears books

Year of construction: 1970, condition: used, Cordia S26 Gear Drilling Machine Drilling capacity in steel (diameter) 26 mm throat 280 mm Drilling stroke 100 mm Total power requirement 1000 Watt , 380 V Machine weight approx. 355 kg Space requirement approx. 1060 x 1000 x 2100 incl. base plate mm Codsm Sg Rkjpfx Adaori Height max .500 mm Table surface 330 x 270 mm Number of spindle rotation 6 steps spindle speeds 95 - 1450 rpm Control conventional

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, DGUV certified until: 09/2026, Planetary mixer mixer Model: PL 20 sophisticated technology ... already proven many times! simple manual operation 3 transmission gears 1 stainless steel kettle 20 liters Crsdpfx Adefxk Uveaei 1 flat beater 1 dough hook 1 broom Boiler protective grille / access protection Table machine with bowl lift Connection 220V, 1100 watts DGUV V3-tested TOP quality and price in one machine! NEW machine exhibition machine Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: good (used), Gear motor, electric motor, three-phase motor -Speed: 25 rpm Crsdpfx Adec Uv Nrjaji -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Brake: 24 V -Dimensions: 490/200/H165 mm -Weight: 20 kg

Condition: excellent (used), Planetary mixer Herbst HRV-S 2-7 Power 1.5 kW Speed adjustable via frequency converter with control cabinet Wall scraper Crodpjvlwdlsfx Adaoi Vacuum pump mounted on stainless steel plate Very good condition, straight from production!!!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, table bore: 80 mm, table diameter: 145 mm, gear diameter: 125 mm, controller manufacturer: Siemens, controller model: SINUMERIK 840 D, TECHNICAL DETAILS Maximum wheel diameter: 125 mm Maximum module: 3 Crodpexf Azxsfx Adaji Maximum gear width (spur gears): 24 mm Center distance: -25 to +180 mm Maximum swivel angle: 12° Maximum helix angle: 45° Table Table diameter: 145 mm Table bore: 80 mm Infinitely variable table speed: 0.03 – 50 rpm Shaper spindle Stroke rate (double strokes): 1,500 – 3,000 DS/min Stroke position adjustment: 70 mm Stroke length min./max.: 0 – 30 mm Shaper spindle diameter: 85 mm Cutter holder mount: HSK 80 B Tool and workpiece Tool number of teeth: 1 – 200 Minimum tool module: 0.05 Workpiece number of teeth: 1 – 1,500 Minimum workpiece module: 0.05 Control Control: SINUMERIK 840 D MACHINE DETAILS Electrical data Drive power: 7.5 kW Total power requirement: 30 kVA Weight and dimensions Machine weight: approx. 8 t Space requirement: approx. 4.3 × 2.8 × 2.9 m EQUIPMENT Swiveling counter-holder with 4 positions Automatic workpiece changing device Linear workpiece conveyor

Condition: excellent (used), Bear AR60 Planetary mixer 60Kg planetary mixer, variable speed, comes complete with one bowl, beater and whisk attachment and a bowl trolley, 3Ph, number 3 on back of mixer Crodjix Ivvjpfx Adaji

Condition: excellent (used), functionality: fully functional, overall weight: 78 kg, torque: 610 Nm, SEW-EURODRIVE R77 DRN112M4/TH 01.7437224601.0005.17 Inverter duty VPWM V 230/400 Hz 50 Cjdexllcfspfx Adaeri r/min 1464/63 kW 4 S1 Nm 610 kg 78.532

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: Frenco URM-K Typ HGM 38101, For sale here is a Frenco gear measurement machine URM-K (Universal Rotational Measurement with Measuring Balls), type HGM (Horizontal, Counter-Centre, Manual) from the year 2000. The device has been out of operation for a long time. When powered on, the error 'A disk read error occurred' appears. Price is negotiable. Csdpfxexli Acj Adaori

Condition: good (used), Geared motor, electric motor, three-phase motor -Speed: 103 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 Credpfsb A R Nqsx Adaji -Quantity: 1 piece available -Weight: 28 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1719, wheel diameter: 280 mm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Crjdpfxow T R Auo Adaoi Max. module: 7 MACHINE DETAILS Machine weight: 13 t Operating voltage: 400 V Control voltage: 24 V DC

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing Crodpfjwzyp Iex Adasi and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm

Condition: good (used), Hobart H600 Planetary mixer Credpenxlwqofx Adaoi Planetary mixer, 60L stainless bowl, whisk attachment, variable speed, with timer, 3Ph

Condition: good (used), Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow ground gear -Gear: spur gear with hollow ground 63 teeth -Shaft holder: inner Ø 40 x 45 mm -Dimensions: see photos Crodpfjwzudgjx Adaoi -Dimensions total: Ø 134 x 60 mm -Weight: 1.8 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Codow T R Ahjpfx Adaori Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Approx. machine weight: 13,000 kg Supply voltage: 400 V Mains frequency: 50 Hz Connected load: 35 kVA

Condition: used, Year of construction: 2008, max. wheel diameter 900 mm gear width 450 mm Crsdpfowzmp Usx Adaoi max. module 10 min. module 1 min. number of teeth 8 milling cutter dia. x width 192 x 215 mm distance table / middle of spindle 910 / 630 mm distance bet. workpiece spdl. ctr-milling sp. 50 / 550 shifting 200 mm swivelling of milling head 240 Grad table diameter 700 mm table bore diameter 160 mm milling head speed 25 - 160 U/min total power requirement 21 kW change gears, arbors, shifting, 2-cut circle, chip conveyor, outer steady # with crowning device # in excellent working condition

Condition: good (used), Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer-Motor DEMAG Type: KBF80A8/2 -Manufacturer-Gearbox DEMAG Type: AF04-MPower: 0.13/0.50 kW -Speed: 43.4/186.8 rpm Codpfsw N Sdlox Adaori -Design: hollow shaft -Hollow shaft diameter: toothed Ø 22/25 mm -Protection class: IP54 -Dimensions: 445/155/H270 mm -Weight: 22.4 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, gear diameter: 180 mm, travel distance Z-axis: 300 mm, shaft length: 640 mm, TECHNICAL DETAILS Wheel diameter - max.: 180 mm Module - max.: 4 Carriage travel axial (Z-axis): 300 mm Shaft length - max.: 490-640 mm Y-axis travel: 33 - 193 mm Cjdpfx Adow T R Abeaori MACHINE DETAILS Total power requirement: 14 kW Machine weight: 8 t Workpiece counter: 886,067 pieces

Condition: good (used), Gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane Cjdpsw N Ryxsfx Adajri -Manufacturer-Motor DEMAG Type: ZBF80A8/2B020 -Manufacturer gearbox DEMAG Type: AMK20DD -Power: 0.13/0.50 kW -Speed: 45/131 rpm -Design: M0-30-1/16.4 -Hollow shaft diameter: toothed Ø 28/30 mm -Protection class: IP54 -Dimensions: 505/210/H220 mm -Weight: 42.3 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 55,784 h, functionality: fully functional, machine/vehicle number: 006 904, spindle speed (max.): 3,000 rpm, gear diameter: 200 mm, travel distance X-axis: 950 mm, travel distance Z-axis: 200 mm, TECHNICAL DETAILS Workpiece diameter: 40 - 200 mm Workpiece spindle speed: 0 - 3,000 rpm Workpiece spindle torque: 45 Nm Power: 11.5 kW Center height of workpiece spindle: 1,140 mm X-axis travel: 950 mm Z-axis travel: 200 mm Minimum feed increment: 0.001 mm Control: SINUMERIK 840 D, PLC type S7 Pneumatics Required system pressure: 5–10 bar Air consumption: 0.6 Nm³/h Lubrication Central lubrication tank capacity: 6 l Lubricant: DIN CGLP, ISO VG 68 Coolant Emulsion Coolant emulsion consumption: 900 l/h MACHINE DETAILS Total power requirement: 31.3 kW Machine weight: 4,000 kg Space requirements: 1.8 x 2.2 x 1.8 m Noise level: max. 76 dB Paint finish: RAL 7035 Operating hours: 55,784 h Operating voltage: 400 V, 50 Hz Rated power: 31.3 kW Rated current: 48 A Crsdpfxjw T Rzwj Adasi Control voltage: 24 V DC Auxiliary voltage: 230 V, 50 Hz

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Cedpfxsw T Ry To Adaeri Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)