Used Briquette Press Log Splitter for sale (14,170)

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator Bcjdpechqxxsfx Abpou CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg ADVANTAGES – Italian manufacture – Used briquetting press – DTR technical documentation – Condition: very good Net price: 34,900 PLN Net price: 8,300 EUR (based on the rate of 4.2 EUR) Bedpfjycid Aex Abpscu (Prices may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2025, Vertical design for splitting short and metre logs Low base plate for easy, low-fatigue loading of large logs Mechanical log lifting device brings heavy logs into position without strain on the operator's back With splitting material catcher Fast, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Comfortable transport with hand drawbar due to standard chassis with hard rubber wheels and additional support wheel Shock and scratch resistant due to high quality powder coating Space-saving storage due to easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Bcodpfx Abshkz Hmjpsu Width/depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type electric motor Input power 3,5 kW Electrical data Supply voltage 400 V Mains frequency 50 Hz Equipment data Splitting force max. 14 t splitting length min. 560 mm splitting length max. 1040 mm splitting material diameter min. 100 mm splitting material diameter max. 300 mm Hydraulic system Tank capacity hydraulic oil 7,5 l Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: good (used), functionality: fully functional, Year of construction: 1916, Binderberger horizontal log splitter 30 t Bcedpfxeyglm Uo Abpsu

Condition: excellent (used), Year of construction: 2021, CATALOG NUMBER 7852 Technical specifications: - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 1000 mm - Throughput: approx. 110 kg/h - Automatic machine operation - Oil cooler - Motor: 7.5 kW - Dimensions (L/W/H): 1800x1100x1500 mm - Weight: 730 kg ADVANTAGES – Unpainted – Italian manufacture – Used briquetting machine – Original DTR + CE documentation Bedsx Hhzvepfx Abpscu – Perfect condition, year of manufacture 2021 Net price: 46,900 PLN Net price: 11,170 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (With significant exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 113 kg, total width: 840 mm, total length: 1,620 mm, total height: 920 mm, fuel: super 95, fuel tank capacity: 3 l, Equipment: trailer coupling, The HS12288 log splitter from HZC Power impresses with a splitting force of 12 tons and a maximum splitting length of 530 mm. The 6.5 hp petrol engine ensures sufficient power and efficient work, while the splitting cycle of just 11 seconds guarantees fast wood processing. The device works in a horizontal position and is equipped with a fixed splitting wedge/splitting cross, which presses the wood against the wedge via the cylinder. The two-handed operation ensures additional safety. The log splitter is easy to transport thanks to the trailer coupling. General data: Manufacturer: HZC Power Model: HS12288 Splitting force: 12 t Maximum splitting length: 530 mm Splitting cycle: 11 s Oil pressure: 270 bar Hydraulic oil capacity: 10 l (HLP46) Product weight: 113 kg Shipping weight: 140 kg Dimensions assembled (LxWxH): 162 cm x 84 cm x 92 cm Dimensions with packaging (LxWxH): 110 cm x 54 cm x 80 cm Special features: Splitting wedge: 15 cm x 20 cm (LxW) Trailer coupling: For easy transportation Working position: Horizontal Operation: 2-hand safety control Splitting wedge/splitting cross: Permanently mounted, wood is pressed against the splitting wedge via the cylinder Motor: Manufacturer: Jiao Model: 6.5 HP / 208 cc Engine technology: Single-cylinder, 4-stroke, air-cooled, OHV (overhead valves) Displacement: 208 cc Cylinder: Cylinder with cast iron sleeve Bore: 68.3 mm Stroke: 55.9 mm Fuel tank capacity: 3.1 l Oil capacity: 0.6 l Engine weight: 16 kg Dimensions (WxLxH): 321 x 376 x 346 mm These details summarize the most important technical specifications and equipment features of the HS12288 log splitter from HZC Power. Splitting force: 12 t - For effortless splitting of wood up to 530 mm in length and a maximum diameter of 50 cm. Cable starter: Easy engine start, even in cold temperatures. Splitting wedge/splitting cross: Permanently mounted, ensures effective splitting without constant readjustment. Hydraulic system: Powerful system with 270 bar oil pressure, ensures high efficiency and durability. Working position: Horizontal - allows you to work comfortably while lying down. Two-hand operation: For maximum safety when operating the log splitter. Oil filter: Integrated oil filter for a longer service life of the appliance. Trailer coupling: For easy transportation on private land, but without road approval. Robust frame: Sturdy frame ensures that the split material is held securely during the splitting process. Bsdswalutepfx Abpecu Compact dimensions: With a width of 84 cm, the splitter can be easily transported on a trailer. Engine: 6.5 hp petrol engine with 208 cc displacement for powerful splitting. Integrated table surface: Provides additional space for storing pieces of wood while working.

Condition: excellent (used), Year of construction: 2003, total height: 2,950 mm, total width: 1,350 mm, total length: 3,300 mm, Complete clean air extraction system with briquette press and piping with sliders etc. Extraction system for woodworking companies with a briquette press underneath. Extraction system ALKO Type: MOBIL-JET 250 Year of manufacture 2003 Extraction diameter 250 mm Rated output 4900 m³/h Motor output 6.5 KW Dimensions approx. 330 x 135 x 2.95 cm With extraction control for automatic slider control. Bjdpfx Abjvr S Ncspecu Briquette press WEIMA/ALKO Type: APC30S Year of manufacture 2007 Motor output 5.5 KW Pressing capacity 30 - 50 kg/h Briquette diameter approx. 50 mm Incl. complete piping with branches, bends, sliders. There is another item of suction pipes with fittings available that can be purchased cheaply. The system has been dismantled and packed ready for loading. See pictures for condition, or refer to the item description. Parts can also be picked up yourself. All dimensions are approximate. All information is provided to the best of our knowledge but without guarantee. Subject to prior sale. The items can be picked up yourself or shipping is at the buyer's expense. Shipping costs are a guideline and may vary depending on distance and unloading options. The stated sales price is the net final amount plus VAT. An invoice with VAT identification will be issued.

Condition: used, Year of construction: 2025, The Holzkraft HSE 5-520 KH log splitter is designed for convenient and safe splitting of short logs for home or semi-professional use. Its compact design and easy operation enable efficient work even in tight spaces. Ideal for firewood preparation. Splitting force: 5 tons Splitting material length: max. 520 mm Bcedjwxc Diepfx Abpju Splitting material diameter: max. 250 mm drive: Electric 230 V mass: about 50 kg

Condition: used, Year of construction: 2013, For sale: MALISZ RUF 400 briquetting press / briquette machine We offer for sale a MALISZ RUF 400 briquetting press, year of manufacture 08/2013. The machine is in good condition and has been used occasionally. It was working in a woodworking production environment and is suitable for briquetting hardwood sawdust. Technical data (from nameplate): • Manufacturer: MALISZ Maschinenbau (Germany) • Type: RUF 400 • Machine No.: 2131 • Year: 08/2013 • Voltage: 400 V • Frequency: 50 Hz Bcsdpfxjygcvme Abpju • Current: 58 A • Protection class: IP54 Included in the offer: • Briquetting press (machine only) • Full documentation available • Regularly serviced Location: Czudec, Poland Incoterms: EXW (PL – 38-120 Czudec) according to Incoterms 2020 Price: 50,000 EUR For more details, photos or to arrange an inspection, please contact us.

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: G26-BXR20-00A1H10-1, Briquetting press for sale in good condition. Bsdpfex Aq Sajx Abpocu

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Bjdpfx Aev Rpxlobpecu Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: like new (used), Year of construction: 2012, operating hours: 21,000 h, functionality: fully functional, year of last overhaul: 2024, protection type (IP code): IP54, Briquetting Press RUF 400 COMPLETE BRIQUETTING LINE AVAILABLE FOR PURCHASE: Drum sawdust dryer Bodoxu Ryuspfx Abpjcu Feed auger Belt conveyor – 2 pcs Separator with hopper Screw conveyor – 6 pcs Wet sawdust storage bin Fuel storage bin Wood waste boiler Wood waste crusher Extraction fan with cyclone Packing machine with compressor Additional photos and information available upon serious inquiry.

Condition: like new (used), Hydraulic log splitter, working Details on request Bcjdpfjfin Rgox Abpju

Condition: as good as new (ex-display), Year of construction: 2022, Briquetting press for aluminium or steel chips Extremely high pressing force of 3,700 kg/cm² Large storage silo Bcedpfx Asw Ig Suebpsu Briquette size: 60 x 40 mm Throughput: Aluminium chips – up to approx. 70 kg/h Steel chips – up to approx. 100 kg/h Brass chips – up to approx. 100 kg/h *depending on feedstock Included: - Emulsion tray - Emulsion pump - Oil cooler

Condition: new, Year of construction: 2026, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant Bodpfxsffh Ats Abpscu . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: good (used), Technical specifications: Bcodpowtdk Tefx Abpju Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Functional guarantee upon handover We are happy to arrange a free test run!

Condition: good (used), Technical data: Briquetting press RUF RB 440 Bcedpot H D Ezjfx Abpou Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Length: 40 - 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: ready for operation (used), Technical characteristics Power consumption of hydraulic power pack : 5.5 kW Production capacity depending on material, e.g. for a bulk weight of approx. 250 kg/m3 : 30 to 50 kg/h Briquette diameter : 50 mm 100-liter oil tank built in boiler construction Main cylinder, feed cylinder, gripper cylinder Holding clamp Electrical panel with PLC Temperature and oil level monitoring device, Hardened steel compression cylinder, Automatic briquette length adjustment system Connection for briquette discharge pipe. Insalled options : Bottom plate, screw extraction, silo unloader Hopper 1040 x 1040 mm Paddle level sensor Oil preheating Bcodjtpryyjpfx Abpju Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush Bcedpoupiapjfx Abpeu - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter Bedpjuph Uxofx Abpocu - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: used, Year of construction: 1996, Manufacturer: Bogma Model: M75 Year of manufacture: 1996 Capacity: 2700 - 3600 kg/h Complete briquette line. - Mooving flor - Screw conveyor - Screw conveyor - Screw conveyor - Feeding system for Bogama 2pc - Three Bogma (briquette press) - One Bogma for spereparts - Pipes for ready briquettes - All hydraulic - All electric, control Bsdpfx Abjh A S Erspscu - Walking platforms etc

Condition: new, Year of construction: 2025, Hydraulic briquetting press with 4 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 30-50 kg/hour. The raw material hopper is 1m3, and has an agitator on the bottom. The machine has an oil cooler for the continous work. Bsdpfx Abjf Hmi Ejpecu

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction - Direct incorporation into existing production facilities possible Bedpfxjnxkrbs Abpscu - More than 35 years’ experience The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

Year of construction: 2025, condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes Bcedpfxscwamxe Abpou • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)

Condition: like new (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, total height: 2,120 mm, installation height: 2,120 mm, total width: 1,000 mm, throat depth: 695 mm, operating speed: 12 mm/s, overall weight: 1,200 kg, reverse speed: 9 mm/s, pressure: 12 bar, Hydraulic press Profi Press automatic 60 Tonnes single phase hardly used Technical specifications Pressure force [kN]: 600 Maximum pressure [bar]: 259 Piston stroke [mm]: 380 Oil capacity [dm³]: 38 Working speed [mm/sec]: 2,87 Approaching speed [mm/sec]: 9,5 Return speed [mm/sec]: 12 Motor power [kW]: 2.2 Voltage [V]: 400/3 Frequency [Hz]: 50/60 Working width [mm]: 750 Weight [kg]: 540 Diameters Inside diameter of cylinder [mm]: 170 Diameter of piston rod [mm]: 75 Diameter of piston head [mm]: 100 COLLECTION ONLY FROM MANCHESTER Payment on collection No Vat . Features of this workshop press (60 ton M/H-2) Integrated pressure manometer Pressure regulation Hydraulic unit with a 2-speeds handle In height adjustable working table Joystick for the control of the piston Hand pump for precision pressing Optional accessories Movable cylinder Foot pedal, two-hands operation or hand remote controller V-block set for extra support Mandrel set / Pressure pins Digital stroke read-out Table plate / pressing table Protection screens (customisable) Dimensions in mm A: 2120 Bodpfsx Dzfaex Abpscu B: 1000 C: 695 D: 750 E: 260 F: 1315 G: 150 H: 197 I: 750 J: 805 K: 200 NO VAT ! , no vat added.