Used Briquetting Plant for sale (3,386)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale: a used CHP unit with few operating hours, hardly used. Natural gas. Gusdpfjzcwhvex Ad Rji Details: see nameplates.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) Gjdpfezg Dx Uox Ad Roui - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: reconditioned (used), overall weight: 40,000 kg, We are offering this refurbished ASTEC SIX PACK mobile asphalt mixing plant. Guedpfx Adjzz Ru So Rji If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Gjdpfxjzxqd Is Ad Rsui Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: new, functionality: fully functional, Copper Granulators Copper Granulators All prices are net prices. - GM-S03: 4,200 Euros - GM-S05: 5,050 Euros - GM-S08: 7,700 Euros - GM-S15: 11,300 Euros Compact and powerful cable recycling machines for the efficient separation of copper and plastic. Capacity, depending on the model: 30–150 kg/h at 4.28–8.5 kW. Ideal for small to medium-sized recycling operations. Image 1 – Cable recycling plants Professional cable recycling machine GM-T500 High-quality system for the efficient processing and separation of cable material. Suitable for various types of cables and industrial applications. GM-T500: Copper wire granulator, up to approximately 300–400 kg/h, 34.15 kW Price: 55,640 Euros net Granulators GM-B200 to GM-D600 Robust machines for the professional shredding and processing of cables and metal materials. Various models with 1.5–11 kW motor power and different throughput and performance sizes. Ideal for recycling operations, cable processing, and industrial applications. Available models as per overview: All prices are net prices. • GM-B200 – 1.5 kW, 400 Nm Godpfx Ajz Eil Usd Reui 3,000 Euros • GM-B300 – 3 kW, 1,628 Nm 4,840 Euros • GM-B400 – 4 kW, 2,919 Nm 6,780 Euros • GM-B500 – 7.5 kW, 4,574 Nm 8,940 Euros • GM-B600 – 11 kW, 8,500 Nm 12,860 Euros • GM-D400 – 2 × 4 kW, 5,800 Nm 8,900 Euros • GM-D500 – 2 × 7.5 kW, 9,148 Nm 12,200 Euros • GM-D600 – 2 × 11 kW, 25,000 Nm 16,520 Euros

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Gedpfxsz D Ihfs Ad Roui

Condition: defective spare-parts repository (used), functionality: not functional, Due to warehouse clearance and stock reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. Gedpfoz Efu Sex Ad Rjui The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquette press / briquetting press / metal press Briquette press for compacting metal chips, wood chips, etc. No. 5 Manufacturer: COMAFER Type: Metapress 400 Briquette diameter approx. 70 mm Briquette length approx. 60-100 mm Motor power approx. 22 kW The machine comes from a batch of such presses. Another identical machine is still available. The sale is expressly as defective, as a source of spare parts, or for rebuilding by hobbyists for export, etc. Various spare parts for this machine type are still in stock. If both machines are purchased as a package, the spare parts can be included. Condition: see pictures. (See pictures – a prior inspection is expressly desired; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale.) All information without guarantee. The machines can be picked up by the buyer or shipped via freight forwarder at the buyer’s expense. Loading and/or packaging can be organized by us. The shipping costs are an estimate; depending on the distance and unloading possibilities, these may vary; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: Due to age and wear, the sale is exclusively to commercial businesses without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Due to warehouse clearance and inventory reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquetting press / Chip press Manufacturer: RSN Type: ECO Motor power: 5.5 kW Briquet diameter: approx. 60 mm Year of manufacture: 1987 Dimensions: approx. 235 cm x 130 cm x 113 cm The machine has been stored in my warehouse for some time. It was once taken in as part of a trade-in, but there was never enough time to assemble and inspect the machine. Sale is exclusively as a defective parts machine or for refurbishment by hobbyists. Any defects cannot be ruled out. Visually, the machine appears to be complete. No parts are missing. (See pictures. A prior inspection is highly recommended; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. Gujdpfez Efvcjx Ad Rji The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading and packaging can be arranged by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options, so please inquire. The stated selling price is the net price plus VAT. An invoice with VAT breakdown will be issued. Warranty basis: due to age and wear, the sale is exclusively to business customers without warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty period is 12 months.

Condition: reconditioned (used), Year of construction: 2025, briquette diameter: 100 mm, Equipment: cooling unit, emergency stop, Briquette press Di Più MB100 – Year of manufacture 2009 – Complete system with saws & accessories (Overhauled in 2026!) Briquette press Pawert SPM I-90/200 Overhauled in 2025 (Like new!) For sale are briquette presses of the type Di Più MB100, year of manufacture 2009 (overhauled in 2025/26), including saws, conveying equipment, and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, wood chips, and wood residues. --- Technical data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic ram press --- Equipment: Material hopper Conveying screws Gsdpfxez Dt H Ts Ad Rjui Hydraulic system Control cabinets Saws for cutting briquettes to length Protective covers & safety systems Discharge units --- Scope of delivery: 3 complete Di Più MB100 briquette presses Saws Conveying equipment & accessories Spare parts upon request --- Application areas: Sawmills Wood processing industry Biomass plants Briquette production for energy & sale Location: on request Transport: Organization possible by agreement Price: on request Individual sale or complete package possible

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Gusdoz E Rv Uspfx Ad Rei Length: 5000 mm Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Condition: good (used), Year of construction: 2001, Good, used condition. Few operating hours (1,675 hours). Engine: 11 kW Guedpfx Aswcc D Rjd Rji Pressure: adjustable up to a maximum of 250 bar Throughput: up to a maximum of 200 kg/h Briquet: 150x60 mm Dimensions of the press: approx. 2200x3000x1920 mm (L x W x H) Dimensions of the control cabinet: 500x1250x2120 mm (L x W x H) Weight: approx. 3000 kg

Condition: used, mileage: 1,100 km, gearing type: other, color: green, overall weight: 35,000 kg, tire size: 425/65R22,5, first registration: 05/2009, suspension: air, loading space volume: 10 m³, driver cabin: other, wheelbase: 1,300 mm, Equipment: ABS, Vehicle location: Bovenden, 2-axle, MB axles (disc brakes), air suspension, ABS (anti-lock braking system), U-protection, aluminum side guards Guedpfxjvy A Ils Ad Rsi Wheelbase: 1300 mm Body: LIEBHERR concrete mixer approx. 10m³ Can be converted with separate engine (Deutz or other make) for an extra charge! Suitable hydraulics for engine power take-off on towing vehicle available at an extra charge of € 3,900.00 net! 6x built 2009 with 10m³, 2x built 2011 with 12m³, 3x built 2012 with 12m³! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 478,442 km, power: 265 kW (360.30 HP), gearing type: mechanical, fuel type: diesel, color: white, overall weight: 32,000 kg, empty load weight: 14,395 kg, maximum load weight: 17,605 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, first registration: 01/2005, emission class: euro3, brakes: engine braking, suspension: steel, loading space volume: 10 m³, driver cabin: day cab, Equipment: ABS, additional headlights, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, Vehicle location: Bovenden, Mtlg. Haus, 1x comfort seat, heated seats, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, cruise control, switch 16, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, leaf spring suspension, low noise G1, 2 axles with pre-steering, U-protection, side aluminum undercarriage, roof hatch, yellow environmental sticker Gsdpfevy A Npjx Ad Rjui Structure: Concrete mixer Karrena approx. 10m³ gearbox ZF 16 S 182 OD, M-driver's cab, auxiliary drive on flywheel side. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Machine No.: H3480 Year of construction: 2006 Maximum permissible: Drum speed 3800 I/min Inner diameter: Drum 450 mm Drum material: H2/St52 Electric motor: yes Gusdpfx Adsppddye Rji Other: steel exchange case with reinforced bottom, accessories: pump for sludge inlet, flocculant suction pump, flocculant release pump Flocculant station 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer galvanized steel Total mass : approx. 3200 kg Purchase and rent : possible.

Condition: new, functionality: fully functional, Year of construction: 2025, New mobile concrete batching plant from BLENDPLANTS. Fully automatic, computer-controlled concrete mixing plant for continuous mixing of: - Concrete - Polymer concrete - Flowable fill - Soil stabilization - Cold asphalt On-site concrete production instead of ready-mix delivery! Produce only as much concrete on site as you need! No residual quantities, no wasted raw materials! Various machine sizes available: - Feed capacity from 3.5 m³ to 15 m³ - Output rates up to 70 m³/h for this size (E-Series), up to 120 m³/h for the A-Series - Batch production starting from 100 kg - Mobile or stationary versions - Diesel or electro-hydraulic drives BLEND Automation: - Recipe management - Delivery note printing - Data export via USB - Remote access We are the exclusive BLENDPLANTS.com representative in Germany. Contact us – we will be glad to provide you with a customized offer. Gujdpfxetzk Tzo Ad Rei Occasionally, we also have used machines available! Please ask!

Condition: used, functionality: fully functional, operation weight: 14,300 kg, Year of construction: 2016, RENTAL The machine offered is available for rent only!!! Prices: Daily rate from €780.00 Weekly rate from €3,200.00 Gusdpowtq Ifofx Ad Rei Prices exclude VAT

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). 4. Expansion tank Reflex Type N600 (600 liters): Gjdpfxez Tdfgs Ad Reui On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Gjdpfxoya H Uyo Ad Reui

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m Godsxlif Repfx Ad Roui - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: excellent (used), Year of construction: 2017, Plastic pallets 1200x850x40, €17 each, available quantity: 1800 pcs. The quoted price is per piece. Guedpfjxl Rpqex Ad Rsi

Condition: like new (used), functionality: fully functional, power: 94 kW (127.80 HP), fuel type: diesel, overall weight: 34,000 kg, Year of construction: 2022, operating hours: 1,238 h, Output capacity up to: approx. 500 t/h Maximum feed size: 800 x 500 x 300 mm Feed height: approx. 3,570 mm Feed height with rear wall folded down: 2,830 mm Hopper volume: 9.1 m³ Hopper discharge belt width x length: 1,400 x 4,500 mm Screening type: double-deck heavy-duty screen Screen area upper deck: 1,550 x 4,880 mm (W x L) Screen area lower deck: 1,550 x 4,500 mm (W x L) Fine material conveyor width x length: 1,200 x 4,380 mm Fine material discharge conveyor width / length / discharge height: 900 x 7,760 / 2,960 to 3,980 mm Gujdjxl Szzjpfx Ad Roi Medium grain discharge conveyor width / length / discharge height: 900 x 7,760 / 2,310 to 3,630 mm Oversize discharge conveyor width / length / discharge height: 1,400 x 6,065 / 2,650 to 4,050 mm Drive concept: diesel-hydraulic Engine manufacturer: John Deere Drive unit power: 94-98 kW Transport dimensions: 15,840 x 3,000 x 3,400 mm (L x W x H) Transport weight: 34,000 kg

Condition: new, Year of construction: 2025, Economical solutions with short delivery times Conveyor belts suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang and others Conveyor belts suitable for all common shredders such as Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 and others Manufactured according to your specifications: - Unlimited length Gedoxmvplepfx Ad Rsui - Width up to 1800 mm - 2, 3, or 4 material layers - Various profiles - Steel wire quantity: 10cm/ 35 +/-1 - in various material thicknesses Conveyor belts of the highest quality

Condition: new, power: 290 kW (394.29 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 35,000 kg, tire size: 315/80 R22,5, axle configuration: 8x4, number of seats: 3, emission class: euro6, suspension: steel, driver cabin: day cab, wheelbase: 4,250 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, fog lights, low noise, navigation system, parking heater, seat heater, traction control, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, company-owned, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, telephone pre-installation, navigation system, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), PTO (power take-off), fog lights, leaf suspension, aluminium fuel tank, low-noise G1, central locking, green environmental sticker. Wheelbase: 4,250 mm. Superstructure: with 9/10m³ concrete mixer body, used, in good condition. Disc brakes on front and rear axles. Driver's air-suspension seat, comfort, velour seat upholstery for driver, passenger, and middle seat. Additional hot water heater. Driver's cab: M-ClassicSpace cab, 2.30 m wide, 320 mm tunnel. 2 remote control keys, locking system with central locking, light sensor, rain sensor. Mercedes PowerShift 3 transmission G 211-12/14.93-1.0. Heavy-duty series, new generation from 18 t. Digital radio, speakers, 2-way system, navigation system, compatible with FleetBoard Manager App, Truck Data Center 7, multimedia cockpit, interactive, remote online, remote connect, pre-installation and display for up to 4 cameras, aluminium tank 320 l, left, 735 x 700 x 750 mm. Engine: OM470, inline 6, 10.7 l, 290 kW (394 hp), 1,900 Nm, Euro VI E, 2nd generation OM470, High Performance Engine Brake, engine PTO rear, flange 100 mm, 650 Nm. Arocs model generation 5. New vehicle from stock with day registration 17.08.2023! Optional: Also available with quick-change system concrete mixer for an additional charge of EUR 9,000! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Guedpfx Adjxta Swe Roi

Condition: used, Year of construction: 2017, Two RE2 Facelift wood gasifiers, in operational condition, are available. They have already been dismantled and are ready for collection in my warehouse. Godpfjxuqpvox Ad Rsui

Condition: used, No. 10031 Mobile screening plant with trailer Spaleck SEWU 2400 x 5000 Used According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Screening plant Spaleck SEWU 2400 x 5000 Used, year of construction 2012 Trailer Multi-Trans ZAL 4PA Used Load capacity 47000 kg Weight 8600 kg Conveyor belt STK Metall ML-BAND Used, year of construction 2012 Godpoyl Sg Sofx Ad Reui Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location