Used Brush for sale (1,603)

Condition: good (used), Year of construction: 2001, • Sanding width (mm): 1100 • Workpiece thickness (mm): 3 - 150 Gjdpsww Iatefx Akhekd • Total sanding units: 1 • Longitudinal belt: 1 • Calibration roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding • Constant table height • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed rate: 3 - 11 m/min. • Sanding belt length (longitudinal unit) (mm): 1,900 x 1,120 • Pressure beam: CSD system, electromagnetic, wear-free • Availability: checked, in stock

Condition: new, diameter of brush Ø 250 mm Gsdjxaamnspfx Akhekd width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: good (used), Year of construction: 1993, EL. connected load: 44.2 kW 6 washing brushes/good condition Working direction: right/left Gkodpfxswx H Tbo Akhsd Washing height: 2500 mm Inlet to washing machine l=3200 mm Outlet to washing machine l=1100 mm

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Seppi M. MINI-BMS 105 / 5–10t / Forestry Mulcher / CUT CONTROL / Demo unit / Rotary drive / Year of manufacture: 2023 / in stock & immediately available Price: €18,990.00 net / €22,598.10 gross Gkedpfx Asymi Naekhsd - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5–10 tonnes - For mounting on various interface plates - Drive designed for hydraulic motor depending on carrier unit oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire length of the hood - Front guard with chains - Rear guard with chains - Reinforced, height-adjustable skid runners with hard metal base plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement (min-max): 29–58 cm³ - Required hydraulic pressure (min-max): 150–250 bar - Required hydraulic oil flow (min-max): 60–130 l/min OPT372 hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. For the hydraulic hood, a double-acting hydraulic connection is also needed. The unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner, as well as dealer and service partner for Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Seppi M. equipment for you! Errors and prior sale excepted! Internal ref.: 170068 = More information = Please contact Marius Herden for more details.

Condition: new, Year of construction: 2026, Condition: New Machine type: Twin-column bandsaw fully automatic Blade dimensions: 4,240 x 34 x 1.1 mm Cutting capacity (rectangular): 325 x 380 mm Cutting capacity (round): 325 mm Bundle cutting: 190 - 300 x 70 - 140 mm Cutting speed: 15 - 100 m/min (stepless) Main drive motor power: 3.7 kW Table height: 800 mm Coolant capacity: 75 L (19.8 gal) Clamping force: 18-28 kg/cm² Control method: Hydraulic, NC Automatic Single cut length: 0-403 mm Multiple cut length: 0-9,999 mm Residual piece: 50 mm Weight: approx. 1,950 kg Dimensions (W x D x H): approx. 2,410 x 2,250 x 2,250 mm Standard Equipment: - Touchscreen control Gedpfeyc Hd Tsx Akhskd - Stepless cutting speed adjustment (frequency inverter) via touchscreen - Up to 100 jobs programmable - Automatic kerf compensation - Double retracting vices - Display for blade height and cutting speed - Blade height encoder - Work lamp - Blade cleaning brush - Coolant gun - Broken blade detection sensor - Hydraulic blade tensioning - Hydraulic carbide blade guide - Hydraulic chip conveyor - Vibration damper - Manual in English - Machine feet - CE Options: - Variable pressure adjustment for clamping jaws - Hydraulic bundle clamping - 2 meter roller conveyor

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. Gkjdpjyltvujfx Akhed We are an authorised distribution and service partner for Magni Telescopic Handlers. We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Condition: used, mileage: 306,127 km, power: 338 kW (459.55 HP), first registration: 10/2012, fuel type: diesel, overall weight: 36,000 kg, axle configuration: > 3 axles, color: red, gearing type: semi-automatic, emission class: euro5, total width: 2,520 mm, total height: 300 mm, Year of construction: 2012, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, DB ACTROS 4146 AK MP3 8X8 Crane Truck with Fassi 660 Loading Crane / Winch and Rotary Servo !! SINGLE TIRES !! Chassis: ? ALL-WHEEL DRIVE! ? Fully leaf-sprung! ? EURO 5 ? Telligent transmission, 16-speed with clutch pedal ? Air conditioning ? Reinforced engine brake ? Cruise control ? Auxiliary heater ? Hill start assist ? 2 x differential locks ? ABS can be deactivated ? Signal horn ? Light bar with LED work lights ? Rotating beacons ? Multifunction steering wheel ? Radio/CD player ? Telephone ? Tires: 395/85 R20 ? Good tire tread! ? Unladen weight: 22,544 kg ? GVWR: 32,000 kg (41,000 kg technically possible!) ? Trailer coupling, pintle hitch ? Permissible trailer load: 12,500 kg ? 2-line trailer brake system ? Overall vehicle length: 10,600 mm Body: ? Flatbed body by MÜLLER with sideboards Crane: FASSI 660 XD Type F600A / 660 AXP 24 ? Radio remote control ? 4 hydraulic extensions ? Hydraulic ROTARY HEAD ? Hydraulic WINCH ? 4-point outrigger system ? 10-tonne crossbeam Special equipment: Trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, dashboard steel brushed, audio system: CD radio (Bluetooth incl. built-in telephone), battery 220 Ah, air horn(s) on the roof of the driver's cab, driver's cab: driver's cab - spring reinforced, driver's cab: driver's cab entry movable, driver's cab: comfort suspension (1.8 HZ), filter for construction site vehicles, generator 100 A, fuel tank: 400 liters, clutch reinforced, cooling reinforced, auxiliary drive MB 10C, parameterizable special module, rotating beacon left/right, side windows heat-protective glazing, circuit breaker, seats in the driver's cab: driver's seat comfort suspension seat incl. horizontal suspension, sun visor, sun protection roller side windows, driver and passenger door, voltage converter 24V / 12V 15 A, rear axle stabilizer reinforced, socket 12 volts, front bumper in steel, crossbeam for trailer coupling, additional thermal insulation, auxiliary heater (water), oil cooler transmission Gkjdpfx Ao Ahp Twskhsd Additional equipment: 2nd front axle steered, emission standard EURO 5, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing hitch, exhaust pot vertical behind driver's cab, exterior mirrors electrically adjustable and heated, roof hatch (steel), differential lock rear axle, differential lock front axle, driver's cab: S (short), suspension: leaf / leaf, power windows, gearbox 16-speed, rear axle H 7, 13 t, bevel gear 300, hydraulic pump (Meiller pump - 6 pistons), body/structure: chassis for dump truck (additional AV), body/structure: dump truck, model update from 06/2008, engine 12.0 L - 335 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, Telligent transmission, Telligent brake system with ABS, drum brake front and rear axle, transfer case - with differential lock, preparation CB radio, preparation telephone/fax, immobilizer, heat-protective glazing, central locking incl. key, permissible total weight 41.0 t ? 1st owner! ? German vehicle ? TÜV (technical inspection) on request and at extra cost: new! Errors and prior sale excepted!

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Gsdpfx Akofg E H Ejhskd Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm Gedjfg Rlbepfx Akhjkd 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis

Condition: used, sweeping width 800 tenb. container volume 114 l total power requirement 3,0 kW 2759 m²/h max. 5232 m²/h Gkedpfsg Ti Ihjx Akhod Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !!

Condition: not inspected (used), Code: 0256 Brand: STEFANI Gkjdpfx Astpgtwskhjd Model: ACTIVA 1-73 - CE Standard Automatic edge bander with grinding unit for edges in wood, veneer, pvc, abs, furniture and various - CE Standard Technical data: Edge thickness min/max 0,6-25 mm Coil material thickness min/max 0,3-3 mm Min/max panel height mm 10-60 Min panel width mm 70 Automatic pressure bar lifting Feed speed variator 8-30 mt/min Controlled guide before grinding Group of 2 grinders for panel grinding - N° 2 motors - Suction mouth diameter 120 mm Glue tank pre-melting unit Gluing unit: N° 1 pneumatic pressure roller diameter 180 - N° 3 pneumatic pressure rollers diameter 100 Soundproof protection cabin Tilting end cutting unit - Diameter of blades mm 140 - Rpm 12000 Trimming unit: Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Bevelling unit : Tool diameter mm 80 - Motors Kw 0,75 - Rpm 12000 Rounding unit with 4 motors : Motors Kw 0,35 - Rpm 12000 Edge Scraping Unit Oscillating sander - Motor Kw 1,5 - Rpm 1400 Brush unit: Motor Kw 0,3 - Rpm 1450 Track speed variator Compressed air 6 bar Overall dimensions mm 8200 x 1500 x 1650 h Weight Kg 3500 Machine NOT reconditioned

Condition: ready for operation (used), operating hours: 7,381 h, functionality: fully functional, mileage: 53,179 km, power: 55 kW (74.78 HP), first registration: 03/2019, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 From first owner = former municipal/authority vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 51,892 km in 10/2025 Machine version with new pedal system 4,297 sweeping operating hours 7,381 total operating hours 53,179 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,900 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning / heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible through additional attachments from HAKO, such as sweeping brushes, snowplows and lawnmowers (not included in the scope of delivery) Errors, changes and prior sale reserved We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes and prior sale reserved We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturdays by appointment. Outside of these opening hours, telephone appointments can be arranged. We will gladly accept your existing used equipment/vehicle in part exchange. Gjdpfx Ajz R Ac Sekhokd Sales to commercial businesses and exporters are given priority, and this applies to our entire vehicle stock. The aforementioned information is non-binding, errors/changes and prior sale reserved!

Condition: new, functionality: fully functional, Year of construction: 2026, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg Gkedpoupiapjfx Akhed included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, number 96 Positionen weight 600 kg Godpfod Rmbnsx Akhekd condition neu 28 mm Special set 96 pieces, 28mm system, consisting of: 1x tool trolley 30x quick release bolts with twist lock short, without O-rings 8x universal stop 150 L - nitrided 4x universal stop 225 L - nitrided 8x stop and clamping angle 175 L - cast 2x stop and clamping angle 500 G left - nitrided 1x stop and clamping bracket 750 G left - nitrided 1x stop and clamping bracket 750 G right - nitrided 1x stop and clamping bracket 500 G left - nitrided 1x stop and clamping bracket 500 G right - nitrided 4x stop and clamping angle 300 G left - nitrided 8x prism Ø60-135 ° burnished - with collar complete with screw collar and countersunk head 16x professional screw clamps - nitrided 6x Professional screw clamp 45 ° / 90 ° - nitrided 4x universal stop 300 - nitrided 1x accessory set consisting of: Eccentric, Allen key, brush, sharpening stone, Probe CleanBasic, Probe non-stick and torch holder.

Condition: new, 330 mm 330 mm 400x330 mm saw band length 4570 x 34 x 1,1 mm table height 800 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 2,35 t dimensions 2,23 x 2,15 x 1,8 m PROMOTIONAL PRICE!!!! 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity Gsdpfx Aefb Nbgokhskd and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) conveniently and easily. When the target dimension is entered, the control automatically calculates the saw waste and the number of feeds. Additionally, the error code display system provides quick analysis for troubleshooting.

Year of construction: 1997, condition: good (used), • Working width (mm): 1300 • CSD system • Cross-sanding unit • Longitudinal sanding unit - shoe Gedpfeidi Ivsx Akhekd • Brushing unit • Ionization

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Constant working height with combined unit with steel contact roller and electronic CPS articulated pressure beam with 25 mm pitch Sanding width 1100 mm Abrasive belt length 1900 mm Gkodpezk Nlbjfx Akhod Workpiece thickness min./max. 3–150 mm Feed speed: infinitely variable 2.5–13 m/min Grinding unit 11 kW Paint package: - infinitely variable belt drive speed via frequency converter - Belt blow-off device - Vacuum conveyor belt with blower Control system: - Terminal with 50 programme memory slots - simple menu control via plain-text display - visual display of the active elements in the processing line - Fully automatic PLC-controlled start-up sequence for all drives - digital time and attendance recording with cleaning brush Roller table at the inlet Roller table at the outlet Extraction capacity 1850 ³/h Extraction connections: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection 6–8 bar Air consumption 10 l/min Weight 2,200 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2021, mileage: 41,144 km, power: 62 kW (84.30 HP), first registration: 04/2021, overall weight: 4,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,650 kg, empty load weight: 2,850 kg, wheelbase: 2,500 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Original: only 41,144 km * Only 3,881 operating hours * Condition: see photos * Euro 6 * Schmidt Swingo, available in multiple units * All-wheel steering, switchable * Schmidt Swingo 3-brush system with freely movable front brush arm * 3rd disc brush in front, 800 mm wide, with front brush arm for left-right adjustment * Sweeping width: 2,800 mm * Front extension device * Sweeping material container: 1.8 m³ * Total water volume: 360 liters * Fresh water volume: 180 liters * Opening and tilting of the container via cable remote control * High-pressure cleaner: 150 bar / 15 liters with hose reel * Leaf suction hose: 150 mm diameter with 4,000 mm extension * Hydropneumatic comfort suspension on front and rear axles * Ideal for pedestrian and bicycle paths and narrow lanes * Air conditioning * EasyDrive (Hydrostatic drive) (SN) * Engine: VM R754EU6 - EURO 6c * Reversing and ground camera * Radio CD * Air-suspended driver's seat * 2 seats * Front and rear strobe lights * LED rear lights * Rotating beacon lights * LED daytime running lights * Wheelbase: 2,500 mm * GVWR: 4,500 kg * Unladen weight: 2,850 kg * Payload: 1,650 kg * Self-propelled working machine * If sold to commercial businesses and for export (both EU and non-EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV inspection, a new SP inspection, or a new UVV inspection. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: Gjdpfxezi Srzo Akhjkd We strongly recommend and offer an inspection and examination of the goods so that no false impressions arise about the condition and suitability with the buyer. Inspection and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to change, prior sale and errors.

Condition: new, For inquiries regarding the attachment, Mr. Herden is your contact person (available by phone at ). Bema 20 BK Sweeper / Year of manufacture: 2023 / NEW / in stock & immediately available Price: €5,490.00 net / €6,533.10 gross - Working width 1,250 mm - Weight 348 kg - Max. flow rate (l/min) 80 - Max. working pressure (bar) 180 - Minimum hydraulic output of the carrier vehicle 20 l/min - Volume / weight of the dirt collection container: 135 l / 60 kg Equipment: - Water spray system (main sweeping roller, side sweeping brush) - Side sweeping brush - Hydraulic dirt collection container We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be pleased to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Westtech sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Seppi M. sales and service partner. Gkodpfx Aksznrx Sohed We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. !! Errors and prior sale excepted !! Internal ID: 108944 = Further information = Year of manufacture: 2023 Intended use: Land management Please contact Marius Herden for more information.

Condition: used, Year of construction: 1998, Technical Data: - Manufacturer: Ernst - Type: BM 2 - 1300 - Year of Manufacture: 1998 - Max. brush width: 1,300 mm - Max. brush diameter: 400 mm - Max. working height: 100 mm - Brush motors: 2 × 5.5 kW - Vacuum motor – rated power 7.5 kW - Vacuum motor – speed 2,800 rpm - Height adjustment motor – rated power: 0.45 kW - Height adjustment motor – speed 1,410 rpm - Brush speed 30-350 rpm Gkjdpjzubpasfx Akhjd - Feed rate 3-15 m/min. - Weight: 1900 kg 2.5 ELECTRICAL CONNECTION - Operating voltage 400 V - Frequency 50 Hz - Fuse to be provided by the customer: 63 A - Full load current: 47 A - The cross-section of the supply cable must be at least AWG 2 (25 mm2). 2.6 PNEUMATIC CONNECTION - Operating pressure 6–8 bar - Maximum pressure 8 bar 2.7 EXHAUST CONNECTION - Connection size 4 x Ø = 140 mm - Air requirement 1,108 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 1,180 Pa For blowing device: - Connection size 3 × Ø = 80 mm - Air requirement 390 m3/h per connection - Minimum air velocity at the connection on the machine 20 m/s - Vacuum at the exhaust connection 950 Pa - Vacuum outlet 1 × Ø = 200 mm, 300 m3/h

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of manufacture: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLK outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (incl. automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and individual image transfer to the network (view of the first 2.5 m) Additional 10 m extension of the LLK between the laser and the machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine platform version (without steel structure) Connection to STOPA large storage systems (SKL or UL) Safety devices for storage connection incl. 2nd light barrier circuit Storage interface (without storage trolley) LiftMaster Compact (STOPA version) TRUMPF laser: Solid-state laser TruDisk 8001 with one LLK outlet Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single-cutting-head strategy Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shutdown Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via the Internet Gjdpfx Aezu Sqhskhskd Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine cladding, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding all guarantees and warranties. Subject to prior sale. Machine can also be inspected.

Condition: used, Year of construction: 2020, operating hours: 583 h, functionality: fully functional, working width: 650 mm, area performance: 3,900 m²/h, overall weight: 292 kg, tank capacity: 60 l, water tank capacity: 60 l, The Kärcher B60 BP Dose W R65 is a 2020 model and has 583 operating hours. It has been completely disassembled by us, and each component has been checked for functionality and cleaned. The roller brush deck has been fitted with new bearings and new brushes. Gkedez Nfwispfx Akhsd The suction foot is equipped with new, oil-resistant rubber lips. Four new, maintenance-free batteries are included in the scope of delivery. These can be conveniently charged using the integrated charger. The roller brush deck is ideal for applications where coarse dirt particles (such as wood splinters) are present. The roller brushes "sweep" the coarse dirt particles into a separate container for coarse dirt, which is positioned directly behind the roller brushes. This prevents any particles from adhering to the suction foot, which could impair the suction performance. For efficient use of cleaning agents, the Kärcher B60 BP Dose has a chemical dosing system. Technical data: Working width: 650 mm Tank volume fresh/dirty water: 60 liters Theoretical area performance: 3900 m²/h Operating weight: 292 kg

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 109/1-606, functionality: fully functional, operating hours: 12,415 h, overall weight: 4,800 kg, No minimum price – guaranteed sale to the highest bidder! The machine has the following configuration: Number of units: 11 Pre-milling unit Gluing unit Godpfx Aksz Ni Hnjhjkd Pressure rollers: Type 1914 Cutting unit: Type KA701 Rough milling unit: Type 1828 Fine milling unit: Type FR701 Edge rounding unit: Type FF701 Radius drawing unit: Type ZK501 Straight edge drawing unit: Type 1856 Brushing unit: Type ES701 Gluing system Gluing system: Glue pot TECHNICAL DETAILS Edge band thickness: 3–20 mm Panel thickness: 8–60 mm Panel width: max. 65 mm Panel length: 180–250 mm Feed speed: 10–25 m/min Feed control: stepless MACHINE DETAILS Voltage: 400 V Current consumption: 45 A Dimensions & Weight Dimensions (L x W x H): 9,050 x 1,200 x 2,200 mm Weight: 4,800 kg Transport packages: 2 units Operating hours: 12,415 h EQUIPMENT Tools for pre-milling unit available Tools for pressure rollers available Tools for cutting unit available Tools for rough milling unit available Tools for fine milling unit available Tools for edge rounding unit available Tools for radius drawing unit available Tools for straight edge drawing unit available Tools for brushing unit available CE marking Documentation

Condition: used, overall weight: 1,500 kg, workpiece length (max.): 2,500 mm, workpiece width (max.): 190 mm, workpiece height (max.): 200 mm, grinding belt length: 1,800 mm, grinding belt width: 200 mm, transport length: 2,650 mm, transport width: 1,100 mm, transport height: 2,000 mm, Equipment: CE marking, documentation/manual, No. 04555 Double-sided sanding machine LÖWER DSM 2000 Used For sanding both sides of wooden workpieces in a single pass Gkedpjz N Ixcsfx Akhsd 2 belt sanding units, top and bottom Max. workpiece width 190 mm Max. workpiece height 200 mm Max. workpiece length 2500 mm Sanding belt width 200 mm Sanding belt length 1800 mm Sanding belt speed 1300 m/min Sanding motor power 2x 5.5 kW Sanding motor speed 2870 rpm Feed speed 6 / 11 / 16 m/min Workpiece feed via conveyor belts Motorised height adjustment Height adjustment motor power 0.37 kW Digital workpiece thickness display Sanding belt oscillation Pneumatic sanding belt tensioning 2 brushing units, top and bottom Brush diameter 120 mm Brush length 190 mm Compressed air operating pressure 6 - 8 bar Dust extraction connections 2x Ø 150 mm and 2x Ø 120 mm Required extraction airflow 2515 m3/h Minimum air velocity at the extraction connection 20 m/s Negative pressure at the extraction connection 889 Pa Electrical connection 400 V / 50 Hz / three-phase Required on-site fuse rating 32 A CE marking Technical documentation including operating manual available Transport dimensions approx. 1600 x 1500 x 1800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,143 h, travel distance X-axis: 406 mm, number of axes: 3, This 3-axis Stratasys FDM TitanTI T0031 was manufactured in 2004. It features a build envelope of 406 x 355 x 406 mm and is compatible with various model materials including ABS and PC-ABS. The machine includes additional accessories such as an ultrasonic cleaning tank and replacement print tips. If you are looking to get high-quality 3D printing capabilities, consider the Stratasys FDM TitanTI T0031 machine we have for sale. Contact us for further details. Gkjdpfxoz Nlw Ne Akhsd - System Software: v2.4.0- Model Material Compatibility: ABS, ABSi, PC, PC-ISO, PC-ABS, PPSF- Optional Accessories: Ultrasonic cleaning tank unit (Evolution WP / Genosonic), replacement print tips (T12, T16, T-class headworks), cleaning brushes, maintenance tools, heat-resistant safety gloves, Superlube synthetic lubricant, CGS Stage grease, build sheets/pallets (including stacked build trays and fixing accessories in box labeled), additional material canisters (SR-20 Soluble Support, PC-ABS Model BLK, PC_S Support)