Used Button for sale (1,931)

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints Nwedpfow Nafkjx Ah Uor - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Nodpfxjxpva As Ah Uewr Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 692,959 km, power: 265 kW (360.30 HP), first registration: 10/2015, fuel type: diesel, number of seats: 39, gearing type: automatic, emission class: euro6, color: blue, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), General: * Engine: Mercedes-Benz AdBlue * Emission standard: EURO 6 * Total seating capacity: 41 * Seats: 38+2+1 high/fixed * Standing places: 89 * Transmission: Automatic Safety: * Retarder * ABS * ASR * ESP * EBS * Fog lights * Xenon headlights * Reversing camera Passenger compartment: * Auxiliary heater * Air conditioning * Driver’s microphone * Pram/stroller space * Wheelchair ramp * Wheelchair space * Stop request button * Interior camera Exterior: * Matrix/destination display Lawo * Number of double-width doors: 4 * Lift/lowering system * Power steering * Digital tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches Other features: Twin tyres Vehicle length: 17.95 m Vehicle width: 2.55 m Vehicle height: 3.20 m Tyre tread front axle: approx. 50% Tyre tread middle axle: approx. 40% Nwodpfx Ahow Sqg Rs Uer Tyre tread rear axle: approx. 30% Our internal vehicle number: 11682 Errors excepted. Images and text may differ. Over 300 vehicles constantly available in stock.

Condition: like new (used), Year of construction: 2021, operating hours: 15 h, functionality: fully functional, input voltage: 230 V, Equipment: CE marking, Bin tipper with 130° rotation Maximum load 200kg at 350mm from the carriage Loading of 80, 120, 140, 240-litre wheelie bins at floor level Bin retention by the wheels Discharge height 1284mm from ground level Cycle time: lifting 17s; lowering 12 seconds Nsdpfx Asx Hq Avsh Uswr Power supply 230V Double control panel Up and down buttons with operator safety; Continuous contact and operation validation required

Condition: good (used), MS Qualispray Manual Powder Coating Unit Manufacturer: MS Powder Systems Powder Coating System: Qualispray Digital Control Unit: QSM 2500 Item No.: 80510000 Hand-held Spray Gun: MS Corona CP-2100 Features and Benefits The Qualispray system is part of MS' comprehensive powder coating solutions, known for their efficiency, especially in applications requiring rapid color changes. It controls the Corona (MS Corona) and Tribo (MS Tribo) powder coating processes. The unit features digital displays for parameters such as frequency (F), powder quantity (D), voltage (kV), and current (µA). Buttons allow for programming (PRG), confirmation (ENTER), and increasing (+) and decreasing (-) values. An on/off switch is also included. ``` MS Corona CP-2100 Type: Coating spray gun Output voltage: max. 100 kV Polarity: Negative (standard for most powders) Nwjdpfx Asx Ihqtoh Uer Maximum powder output: Approx. 450 g/min Compatible powders: General powder coatings and metallic powder coatings Weight (gun): The handheld spray gun is very lightweight at approx. 380 g, enabling fatigue-free operation. Technology: It utilizes corona charging technology with a patented corona feedback system, providing high coating quality and high transfer efficiency. Features and Benefits Ergonomics: The lightweight and balanced design of the handheld spray gun ensures easy handling. Efficiency: The high-performance cascade maintains a stable high voltage, guaranteeing uniform and efficient coating, even in hard-to-reach areas (Faraday cages). Adaptability: Thanks to a versatile nozzle system and optional accessories, such as the "SuperCorona" ring for exceptionally smooth surfaces, the gun can be adapted to specific coating tasks. Application The MS Corona CP-2100 is used in industrial and commercial powder coating applications, for example, for metal fences, automotive parts, radiators, and other workpieces where a high-quality and uniform surface finish is required. Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Nwsdsxq Apgepfx Ah Uer

Condition: new, maximum load weight: 96,590 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable as well as detachable. Length approx. 3,650 mm * 2 pairs of folding lashing rings to the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * For tractor unit: 6x4 or 8x4 2-axle front bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm * Chassis width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle double telescopic loading platform with pin-eye coupling at the front and chamfering approx. 500 mm x 8° at the rear, length approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the central beam (LC 10,000 daN) Pendulum axle 2-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered Nsdpfxsxn E Iys Ah Uowr * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and safety pins for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and safety pins for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24x brand of our choice (M+S) 245/70 R17.5 load index 143/141L (146/146F) Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final paintwork with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red * Rear section metallised and painted RAL 9010 (Pure White) Options included: * Truck hydraulic connection with flow controller (20 l/min), including support arm for supply lines, tractor unit tank must be at least 80 L * with MAX Trailer coupling pieces, otherwise coupling pieces to be supplied free ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Removable ALU side boards and rear wall on the gooseneck, approx. 400 mm high, anodised finish * Socket for remote steering operation on the gooseneck with cable remote control and push buttons including single-wheel tracking alignment (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Illuminated gooseneck control area with on/off switch * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed with screw couplings * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 * Stake pocket strips mounted transversely in the load floor for plug-in stakes approx. 100 x 50 mm * Chassis surface finished with sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Surface of the loading platform finished with

Year of construction: 2012, condition: good (used), Multivac T200 Traysealer Nwjdpjx Ex H Tofx Ah Ujr SEMI AUTOMATIC TRAYSEALER FROM MULTIVAC. Semi automatic Multivac T200 traysealer. Easy to use, clean and maintain. Because of it’s compact design this multivac can be put in very small operating places/ kitchens. The Multivac is capable of processing up to a maximum of 6 cycles per minute. Depending on the set-up results may vary. The digital MC electronic control can be operated simply and intuitively. A membrane keyboard, which is easy to clean, is used together with a LCD display. All the process stages are clearly shown on the easy-to-read display. Thanks to the 11 operating languages that can be set, MULTIVAC traysealers can be operated reliably worldwide. We use a high-quality and very precise sensor for determining the vacuum and inert gas values. In the recipe memory, 29 different programs can be stored for a variety of products and called up at the press of a button. This particular model has been used rarely and therefore in a superb condition. It’s available and ready to go. Key features: Delivered with 1 mould: Mould 1: traysize 325 x 265 mm 11 different operating languages. Build in Busch R5 vacuum-pump 40m3/h Compact robust design Hygenic, can be completely washed down. Up to 6 cycles a minute. This particular machine is from 2012 and has only 417 production hours and is in great working condition. Machine Dimensions LxWxH: 1.515x781x1.616 mm; Weight: 300 kg.

Condition: used, mileage: 777,097 km, power: 265 kW (360.30 HP), first registration: 10/2015, fuel type: diesel, number of seats: 39, gearing type: automatic, emission class: euro6, color: blue, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, General - Engine: Mercedes-Benz AdBlue - Emission Standard: EURO6 - Total seating capacity: 39 - Seats: 36+2+1 high/fixed - Standing capacity: 95 - Transmission: Automatic Safety Features - Retarder - Intarder - ABS, ASR, ESP, EBS - Fog lights Passenger Area - Auxiliary heater - Air conditioning - Driver microphone - Stroller space - Wheelchair ramp - Wheelchair space - Stop request button - Interior camera Njdpfxoxwrm Ie Ah Uswr Exterior - Matrix/destination display system Lawo - Number of double-width doors: 4 - Lifting/lowering system - Power steering - Digital tachograph card - Sun visor - Electrically adjustable exterior mirrors - Roof hatches - Roof fans - Roof ventilators Miscellaneous - German registration document - Twin tires - Vehicle length: 17.95 m - Vehicle width: 2.55 m - Vehicle height: 3.20 m - Tire condition (front axle): approx. 50 % - Tire condition (middle axle): approx. 50 % - Tire condition (rear axle): approx. 50 % Our internal vehicle number: 11690 Subject to errors. Images and text may differ from the actual vehicle. Constantly over 300 vehicles in stock.

Condition: good (used), Year of construction: 2001, WEIMA WL4 S Nwodpfx Ajx I I Ixoh Uor Opening : 600 x 900 mm Rotor with 14 knives ( Trapez, 4 sides ) Rotor rpm : 90 Seiwe holes : Ø 15 mm Engine size : 22 Kw Dust extraction nozzle : Ø 160 mm Electric cabinet with emergency stop push button. Set of extra knives included Machine dimentions : L 1900 x W 1200 x H 1800 mm Weight : 1300 Kg

Condition: good (used), Year of construction: 1998, Tool presetter KECHL Type:Trabant 271-2/M Year 1998 Movable by hand / with handwheel / button feed and rapid traverse. Travel : X/Y 270 mm In good condition . Nodpfjr H D N Asx Ah Uswr Documentation available .

Condition: new, maximum load weight: 26,950 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 8,000 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,170 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer SKS Steel Semi-Round Body Tipper 27 m³ | Hardox | Electric Tarpaulin Manufacturer: Kässbohrer Model: SKS B / 27 – 15 / 18 Approval: Germany Condition: New / Built to order ---Body & Specifications * Volume: 27.0 m³ * Perm. gross weight: 33,000 kg * Unladen weight: approx. 6,050 kg * Body length: 8,000 mm * Total length: 9,030 mm * Width: 2,550 mm * Height: 3,170 mm * Fifth wheel height: 1,220 mm ---Body & Material * Steel semi-round body made from Hardox / HB450 * Sheet thicknesses: - Floor: 5 mm - Sides: 4 mm - Front & rear: 4 mm * Rear end flap, mud-resistant, with rubber seal and bolt fasteners * Additional mechanical rear flap * 5-stage HYVA tipping cylinder (250 bar) * Automatic safety brake when the body is raised * Tilting warning system for excessive incline ---Electric Tarpaulin / Cover System * Electric tarpaulin system (650 g/m²) * Operation via button on vehicle and via remote control * Tarpaulin complies with fire protection ISO 3795 * Colour: RAL 3002 Carmine Red ---Chassis & Technology * High-strength S700 MC steel chassis * KTL coating – 10 years corrosion protection * 2 BPW axles with disc brakes (9 t each) * Lift axle, can be controlled automatically & manually * WABCO EBS 2S/2M with ABS & RSS * Electronic air suspension * WABCO Smartboard (axle load, brakes, tires, error display) ---Tyres * 385/65 R22.5 * Premium EU tires * Steel rims * M+S tires Nedpfx Ajx I Twfsh Uswr * Mudguards & splash guards matching tyres ---Electrics & Safety * ASPÖCK Europoint III LED lighting * Rear LED work lights * Side underrun protection in aluminium * Rear underrun protection in steel (ECE R58.3) * Tire pressure monitoring system (TPMS) ---Additional Equipment * Body-Fix system (reduces vibration & noise) * Aluminium access ladder * Document box at the front * Kässbohrer logos on sides & rear * Couplings: Yellow / Red ---Colours * Chassis: MB 7350 Novagrau * Body: RAL 9005 Jet Black * Tarpaulin: RAL 3002 Carmine Red

Condition: new, maximum load weight: 98,290 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment features. Full equipment details available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * 2 pairs of lashing rings, foldable to the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For tractor units: 6x4 or 8x4 2-axle front undercarriage: * Bolt-eye coupling front and rear. Length approx. 2,970 mm * Undercarriage width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle extendable loading platform with bolt-eye coupling at the front and rear bevel approx. 500 mm x 8°, length approx. 11,000 mm * Technically extendable by approx. 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the center beam (LC 10,000 daN) Pendulum axle 2-axle front undercarriage: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * Pendulum axle, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle equalization cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and pre-insertion pin for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24 x brand at our discretion (M+S) 245/70 R17.5 load index 143/141L (146/146F) Painting: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Options included: * Truck hydraulic connection with volume regulator (20 l/min), incl. support gantry for supply lines, tractor unit tank must have a minimum capacity of 80 L * with MAX Trailer couplings, alternatively couplings to be provided ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall on the gooseneck, approx. 400 mm high, anodized finish * Socket for steering operation at the gooseneck via cable remote control with pushbuttons including single-track control of the axles (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Control lighting at the gooseneck with on/off switch * BEKA-MAX central lubrication system for one gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed trailer with screw couplings * BEKA-MAX central lubrication for the 2-axle undercarriage with standard grease NLGI-2 * Stake pocket rails mounted crosswise in the loading platform floor for plug-in stakes approx. 100 x 50 mm * Surface of undercarriage coated with integrated sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 Njdpfx Ahexn E I He Ujwr * Loading platform surfa

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Nwedpfx Aovvkfdoh Ujr

Condition: used, mileage: 797,557 km, power: 265 kW (360.30 HP), first registration: 08/2015, fuel type: diesel, number of seats: 39, gearing type: automatic, emission class: euro6, color: blue, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, General Engine: Mercedes-Benz AdBlue Emission standard: EURO 6 Total seating capacity: 39 Seats: 36+2+1 high/fixed Standing places: 93 Transmission: Automatic Safety * Retarder * Intarder * ABS, ASR, ESP, EBS * Fog lights Passenger compartment * Auxiliary heater * Air conditioning * Driver’s microphone * Pushchair/stroller area * Wheelchair ramp * Wheelchair space * Stop request button * Interior camera Exterior * Matrix/destination display Lawo * Double-width doors: 4x Nwjdpoxwrmzofx Ah Ujr * Lifting/lowering system * Power steering * Tachograph card * Sun visor * Electrically adjustable exterior mirrors * Roof hatches * Roof fans * Roof ventilators Other * German registration certificate * Twin tyres * Vehicle length: 17.95 m * Vehicle width: 2.55 m * Vehicle height: 3.20 m * Tyres, front axle approx. 50% * Tyres, middle axle approx. 50% * Tyres, rear axle approx. 50% Our internal vehicle number: 11685 Errors excepted. Images and text may differ from the actual vehicle. Over 300 vehicles available at all times.

Condition: excellent (used), functionality: fully functional, power: 3.6 kW (4.89 HP), fuel type: diesel, color: yellow, operation weight: 965 kg, Year of construction: 2021, operating hours: 680 h, Equipment: UVV, trailer coupling, Wacker Neuson Light Tower LTE 4K LED, year of manufacture 2021, approx. 680 operating hours, Item number: 5100042191 8.5 m high vertical mast with hydraulic winch for effortless setup at the push of a button 6x LED lamps at 150 W each, 230 Volt connection, Kubota diesel engine with 3.6 kW, car-type ball hitch coupling, Freshly serviced & UVV-inspected, excellent like-new condition. Dimensions (L x W x H): 2550 x 1380 x 2430 mm Weight: 965 kg Machine location: Warehouse D-46514 Schermbeck. Product details: Three stabilizer outriggers simplify positioning and enhance stability on uneven ground and in strong winds up to 110 km/h. Nwedpfx Ahsx H Au De Ujr Rugged and weather-resistant thanks to a powder-coated, galvanized housing. The Automatic Mast Operating Safety System (AMOSS) automatically lowers the mast when the unit is attached to a trailer, providing an additional safety feature. Fields of application: ✔️ Construction site lighting ✔️ Road & civil engineering ✔️ Industrial & warehouse illumination ✔️ Events, emergency & disaster relief ✔️ Municipal & commercial use _____ Buy Wacker Neuson light tower | LTE 4K LED light tower | LED construction site light tower | Light tower with Kubota diesel engine | Mobile light tower 8.5 m | Diesel LED lighting mast | Light tower trailer | Construction site lighting Wacker | Light tower used, like new | Light tower with hydraulic winch | Mobile site floodlight

Condition: used, mileage: 200,000 km, power: 360 kW (489.46 HP), first registration: 01/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2025, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Sleeper Cab Roof spoiler, side fenders, side paneling 2 sleeper berths Air-sprung cab suspension Electrically adjustable, heated exterior mirrors Wheelbase: 3,800 mm Optidriver AT2612 12-speed automatic transmission Optibrake+ (reinforced engine brake) Power take-off on the transmission side Air compressor 1,100 l/min Steel rims VA: 385/65 HA: 315/70 Integrated differential lock HA ratio: 2.47 : 1 Front axle: 8.0 t, 2-leaf parabolic suspension Rear axle: 13 t, air suspension Anti-lock braking system (ABS) Traction control system (ASR) Hill start aid Stability control and anti-tipper (ESC) Emergency Brake Assist (AFU) Emergency brake light (EBL) Automatic parking brake (EPB) Adaptive cruise control (ACC) and advanced emergency braking system (AEBS) ECO cruise control with Optiroll Warning tone for reverse gear engaged Sun visor Luxury driver's seat Swivel passenger seat 24 l refrigerator under the couch Multimedia color touchscreen 7? Pre-installation for camera 24 V socket in the roof console Electrically adjustable roof hatch Compressed air gun in the cab Leather steering wheel Keyless start button Auxiliary heater 2 kW Electronically controlled air conditioning Navigation system (TomTom) FM radio reception, DAB+ Interface for fleet management FMS Gateway 3.0 Nwedpfx Ajtxfw Deh Uor LED main headlights LED daytime running lights Static bend lighting LED rear lighting and rear indicators Windshield wipers with rain sensor and automatic headlight control 405 L aluminum tank right 650 L aluminum tank left 112 L AdBlue tank right Jost JSK42C fifth-wheel coupling Errors, changes and prior sale reserved!

Condition: used, mileage: 42,514 km, power: 75 kW (101.97 HP), first registration: 11/2022, fuel type: diesel, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, fog lights, onboard computer, parking sensors, soot filter, XZ1 Model Generation 1, V85 Smokers' package, W65 Tailgate, E07 Hill Start Assist, LA2 Light Assist, EZ8 Parktronic, MJ8 ECO Start-Stop Function, CL4 Multifunction Steering Wheel with Trip Computer, JK3 Instrument Cluster (Pixel Matrix Display), MS1 Cruise Control, F68 Heated and Electrically Adjustable Exterior Mirrors, V30 Side Interior Trim Cargo Area, L16 Halogen Fog Lights, MX0 BlueEFFICIENCY Package, EN6 Audio 10, SA6 Passenger Airbag, E1D Digital Radio (DAB), S04 Adjustable Passenger Seat, SB1 Comfort Driver's Seat, SE5 Lumbar Support Driver's Seat, VV9 Roof Frame Tie-Downs, D50 Full Divider, IL5 Left Hand Drive, RG1 205/65 R16 Tires, RM1 M+S Tires, RR6 Spare Wheel with Jack, RS3 Steel Wheels 6.5 J x 16, F66 Lockable Glove Compartment, H20 Heat-Insulating Glass All Around, LE1 Adaptive Brake Lights, BA3 Active Brake Assist, JW8 Attention Assist, C70 Pedestrian Protection, EY5 Mercedes-Benz Emergency Call System, EL8 2-Way Speakers Front, GE1 6-Speed Manual Transmission TSG 380, KP7 SCR Generation 4 Emissions Control, CF0 Standard Suspension, IB6 Series C447 Vito/V-Class, BB7 CO2-Optimized Brake System, EW6 Digital Extra: Remote Services Plus, E57 Trailer Socket Pre-Wiring, MT6 Emission Class Euro 6d N1, M72 HVO Compatible Vehicle, M60 Alternator 14 V / 250 A, MG9 Generator Management, MK8 Speed Limiter 210 km/h, XG6 2,800 kg Weight Variant, J55 Passenger Seat Belt Warning System, HH9 TEMPMATIC Semi-Automatic Air Conditioning, KB5 Main Fuel Tank 70 Liters, A1O Rear Axle Shaft Brand IFA, V43 Wooden Floor, ZM0 Panel Van, HI1 Climate Zone 1 (Cold/Comfort), LC4 Comfort Roof Control Unit, JH3 Communications Module (LTE) for Digital Services, IK0 Complete Vehicle, LC2 LED Light Strip in Cargo Area, CL1 Height and Reach Adjustable Steering Wheel, XO9 Mercedes-Benz MobiloVan with DSB and GgD, FF1 Center Console with Storage Compartment, XM0 Model Update, FY7 Multi-Button Remote Control, MU0 OM 654 DE 20 LA 75 kW (102 HP) 3800 rpm, EY6 Breakdown Management, Z3R Premium Tire Protection (3 Years), Z3K Pro, E34 Buffer Battery for Starting Process, IN2 Wheelbase 3200 mm, Long Rear Overhang, IL4 Region EU/EFTA, M3E Electric Suction Fan Power Level 5, XU1 Signs / Documentation German, VV0 Weld Nuts in Side Panel for Conversions Notice Nwedpfx Aoxfwfrjh Uor Despite careful review of all our price listings, errors may still occur. Sometimes these are caused by transmission errors in the systems of various platform providers. But mistakes on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Price labeling also cannot be considered a part of the contract. If you attach particular importance to a specific feature in our listing, please let us know at the time of contract conclusion. We thank you for your understanding!

Condition: used, Year of construction: 2009, operating hours: 3,312 h, 2009 | Haulotte H15 SX (15m) | Used Scissor Lift | 3312 hours 📍Location: France, Illange 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 35 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Left front stabilizer works after bypassing needs to be repaired , only steers right , broken steering button , engine has underpressure Nwsdpox H A Iwsfx Ah Uer 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39711 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, power: 33 kW (44.87 HP), fuel type: diesel, Year of construction: 2025, drive type: Diesel, Farm Loader Technical Condition: New Front Tires Type: Pneumatic Front Tires Condition: 80 - 100% Rear Tires Type: Pneumatic Rear Tires Condition: 80 - 100% Bulk Bucket, Pallet Forks 3rd Valve, 4th Valve, Heating, Road Traffic Licensing Regulations (STVZO), Full Cab, Nwjdpfx Ajwkk Rbsh Ujr Pitbull Compact Loader X27-45CRT 45HP Kubota 4-Cylinder CRT Trelleborg 400/50-15 T463 EURO Mount, Halogen Lighting Set, LED Work Lights Left and Right Rear, LED Bars at the Front, License Plate Holder with Lighting, 1x Double Acting, Mechanically Operated + 1x Double Acting, Electrically Operated via Button on the Joystick, Includes Mechanical Switch with Bucket Lock, 3rd Function Inching, Controllable via Joystick, Combined Trailer Hitch, Ball and Pin, 12 Volt Connection for Rear Trailer Lighting

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment Nwsdpfxoxabvqe Ah Ujr - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW Nedpfx Aox Igzqeh Ujwr - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Nsdpfxsxfg A Hj Ah Ujwr Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: used, Year of construction: 2023, power: 33 kW (44.87 HP), drive type: Diesel, Yard loader Technical condition: New Nodsumy Acopfx Ah Uswr Front tires type: Pneumatic Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, Pallet forks 3rd valve, 4th valve, Pitbull Compact loader X27-26 26hp Kubota 4 cylinder Trelleborg 400/50-15 T463 EURO mount Halogen lighting kit LED work lights left and right rear piece LED bar front piece License plate holder with lighting 1x DW, mechanically operated + 1x DW, electrically operated via button on joystick Incl. mechanical switch with bucket lock 3rd function Inching arrester, controllable via joystick Combi trailer coupling, ball and pin 12 volt connection for trailer lighting rear

Condition: used, functionality: fully functional, Year of construction: 2025, fuel type: diesel, power: 33 kW (44.87 HP), drive type: Diesel, Yard loader Technical condition: New Front tires type: Pneumatic Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, Pallet forks 3rd valve, 4th valve, Njdpfx Aoumy Aioh Ujwr Pitbull Compact loader X27-45CRT 45hp Kubota 4 cylinder CRT Trelleborg 400/50-15 T463 EURO mount Halogen lighting kit LED work lights left and right rear piece LED bar front piece License plate holder with lighting 1x DW, mechanically operated + 1x DW, electrically operated via button on joystick Incl. mechanical switch with bucket lock 3rd function Inching deflector, controllable via joystick Combi trailer coupling, ball and pin 12 volt connection for trailer lighting rear