Used Bystronic Bystar for sale (156)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 17650001, functionality: fully functional, power: 34 kW (46.23 HP), pressing force: 250 t, stroke length: 400 mm, throat depth: 250 mm, working width: 3,100 mm, TECHNICAL DETAILS Chsdpfx Amjzk Dv Iohea Number of axes: 8 Press force: 250 t Max. working width: 3,100 mm Frame spacing: 3,200 mm Overhang: 250 mm Rear gauge depth: 750 mm Max. stroke: 400 mm MACHINE DETAILS Control system: Bystronic ByVision Power: 34.0 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,390 x 3,340 mm Weight: 20,500 kg Transport packages: 3 EQUIPMENT Crowning system: CNC-controlled Ram holder: Hydraulic Tool holder type: WILA standard Tools included Documentation CE marking and certificate Additional finger stop Stroke assistance Finger protection Offline software

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Csdpfx Aoya Iaqsmhoha Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, functionality: fully functional, operating hours: 28,922 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bystronic, controller model: ByVision, laser type: fiber laser, laser source manufacturer: MaxPhotonics, laser hours: 9,467 h, laser power: 8,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 169 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of input current: three-phase, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, Bystronic ByAutonom 3015 – Fiber laser cutting machine (retrofit 2024) A very complete and production-ready flatbed laser cutting machine from Bystronic. Built in 2014, it was fully converted in 2024 from CO2 to a modern 10 kW fiber laser (MaxPhotonics), including CE declaration for the conversion. The machine is currently in production and combines the robust Bystronic platform with an automatic pallet changing system and a high degree of automation with the speed and low operating costs of fiber technology. Cedpsznt I Uefx Amheha Technical specifications: • Brand / model: Bystronic ByAutonom 3015 • Year of manufacture: 2014 – fiber retrofit 2024 (with CE declaration) • Laser technology: fiber 10 kW – MaxPhotonics • Cutting head: RayTools BS08K smart cutting head with autofocus • Working area: 3,000 x 1,500 mm • Pallet changer: automatic pallet changing system, changing time approx. 22 s, load capacity 890 kg per pallet • Cutting capacity: steel up to 25 mm (O2, up to 40 mm possible), stainless steel up to 25 mm (N2), aluminum up to 20 mm, brass up to 20 mm • Dynamics: simultaneous 169 m/min, acceleration 30 m/s² • Accuracy: position deviation 0.1 mm/m, repeatability accuracy 0.05 mm • Control system: Bystronic ByVision with 22" touchscreen • Operating hours: approx. 28,922 hours machine / approx. 9,467 hours laser production Equipment / options: Automatic nozzle changer (40 positions), automatic nozzle centering with collision detection, filter system (DFPRO 6-3000), conveyor belt for scrap and small parts, extra laser protection windows front and side. Included: All documentation (digital), support & assistance, certified pre-purchase inspection, webshop with discount account. Optional (turn-key delivery possible): Dismantling, transport (including insurance), installation, base plates & anchoring, CAD/CAM software (advanced), extended warranty, smart factory connection, machine & software training, FastCal calculation software and portal. Interested in this machine? Please contact us for more information, a viewing, or a price indication.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 225 t, stroke length: 200 mm, table length: 4,100 mm, overall weight: 15,000 kg, Equipment: safety light barrier, Fully Serviced Bystronic CNC Pressbrake Available for Purchase A high-quality, pre-owned Bystronic Xact Smart 225/4100 hydraulic downstroke CNC pressbrake is currently available for sale. This 2019 machine is fully serviced, operational, and ready for immediate deployment. Key Technical Specifications Manufacturer: Bystronic Model: Xact Smart 225/4100 Year of Manufacture: 2019 Bending Capacity: 225 tons Bed Size / Working Length: 4,100 mm (4 metres) Control System: ByVision touchscreen CNC control Total Axis Configuration: 7 axis total, featuring a 5-axis backgauge (X, X1, R, Z1, Z2) Crowning: Hydraulic deflection compensation Installation Requirement: Free-standing design; no foundation pit required Core Advantages High Precision: The 5-axis backgauge and hydraulic crowning ensure exact bending angles across the entire 4-metre bed length. Csdpfxjzg Nq Ns Amhsha User-Friendly Interface: The intuitive ByVision touchscreen control simplifies setup and reduces programming time. Cost-Effective Installation: The free-standing configuration eliminates the need for expensive floor excavations or pits. Feel free to let us know if you would like us to draft a formal quotation for you

Condition: ready for operation (used), Year of construction: 2006, laser power: 4,400 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 3, This 3-axis Bystronic BySpeed 3015 was manufactured in 2006. It features a powerful 4.4 kW CO2 resonator and can accommodate a maximum sheet size of 3000 x 1500 mm. The machine includes 20 pallet positions for efficient operation. If you are looking to get high-quality laser cutting capabilities, consider the Bystronic BySpeed 3015 CO2 laser cutting machine we have for sale. Contact us for further details. • Resonator: 4.4 kW CO2 • Max. sheet size: 3000 x 1500 Additional equipment • ByCell Cedpfxozl D N Ds Amheha • 20 pallet positions

Condition: reconditioned (used), functionality: fully functional, Lenhardt sealing table. Codpfxszmmkyo Amheha

Condition: good (used), Bending tool, die, upper blade, upper tool, tool for press brake Chodpfx Aod D Hv Nsmhja -divided -Dimensions: 31.007.2101 -Height: 86 mm -Length: 2x100 mm -Dimensions: 21.002.01.01 -Height: 155 mm -Length: 2x100 mm -Packaged: in a wooden box -Weight: 11.9 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, pressing force: 100 t, stroke length: 215 mm, table length: 4,100 mm, Equipment: CE marking, High quality fully serviced Bystronic 4metre cnc pressbrake for sale PR100 100 x 4100 Make: Bystronic Edwards Pearson Model: PR 100 Pressure Reference Year / new: 2005 Total axis: 4 – 2axis back gauge X R – complete with 2 additional fingers on the back gauge, 4 fingers in total. With built in hemming table for producing sheet metal flashings or safety edges on sheet metal Hydraulic crowning Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 100ton Cnc control: Cybelec Modeva 10S control Max stroke 215mm Rapid approach 180mm/s Chodpfx Aszdgnnomhsa Bending cycle 10mm/s Rapid return 150mm/s

Condition: ready for operation (used), Year of construction: 2017, pressing force: 41 t, stroke length: 200 mm, overall weight: 4,000 kg, Press brake manufactured in 2017. This Bystronic Xpert 40/1030 features a press force of 400 kN and a bending length of 1030 mm. It includes a ByVision Bending control system and a 6-axis backgauge for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details. • Control: ByVision Bending • Backgauge: 6-axis • Interface: OPC • Oil cooling system • Safety system: Fast Bend G2 • Electrical: 3-phase 400V / 50 Hz • Main motor power: 7.5 kW • Made in Germany Codpfx Amjy Tw R Tjheha • The PLC Runtime is 1812 hours • The Robot Runtime is 140 hours. Additional equipment • Bystronic Mobile Bending Robot (Integrated robotic bending cell) • Year of manufacture: 2017 • Electrical: 3-phase 400V / 50 Hz • Power consumption: 3 kW • Pneumatic pressure max: 8 bar • Weight: approx. 1000 kg LIST OF TOOLS Bystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=300 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=275 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=200 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=100 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=50 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=30 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=20 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=15 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=10 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=275 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=200 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Left Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Right Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=50 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=30 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=20 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mm Technical Specification Bending Length 1030 mm

Condition: excellent (used), Year of construction: 2008, pressing force: 200 t, stroke length: 415 mm, operating speed: 10 mm/s, reverse speed: 150 mm/s, table length: 4,100 mm, overall weight: 17,400 kg, Equipment: CE marking, safety light barrier, High quality, fully serviced, very clean Bystronic 4metre x 200ton cnc pressbrake for sale Pr200 200 x 4100 Make: Bystronic Model: PR 200 Pressure Reference Year / new: 2008 Total axis:6 – 4axis back gauge X R Z1 Z2 Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Cnc control: Cybelec Chedpfxjzcw Uve Amhea Max stroke 415mm Rapid approach 190mm/s Bending cycle 10mm/s Rapid return 150mm/s

Condition: new, Year of construction: 2026, Laser power: 6000 Watt Working range laser: 3050 x 1550 x 270 mm Chedpfx Amsxq Rczshea positioning speed X/Y/Z: 90 m / min simultanious: 120 m / min Max. workpiece weight: 1000 kg Max. steel: 20 mm Max. stainless steel: 16 mm Max. aluminium: 14 mm Max. copper: 8 mm Max. brass: 14 mm Length: 10050 mm Width: 5100 mm Height: 2600 mm Machine weight: 8100 kg Electrical connected load: 54 kW

Condition: used, Year of construction: 2015, Bystronic CO2 laser with 6000W laser power including automation and storage system. Automatic pallet changer Byvision cnc control Automatic nozzle centering Regulated Pulse Piercing Csdpfjzdtyiox Amhjha Nozzle cleaning Collision detection Cooling unit Filter unit More info and videos available on request. Viewing possible upon appointment. Immediately available. Working dimensions: 3000 x 1500 mm Laser output: 6000W Automation (sorting and storage): ASTES4SORT (12 positions) Storage: TRAFO (12 storage positions) Power on: 41643h Cutting hours: 25394h

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Year of Manufacture: 10/2022 Technical Data: Maximum Press Force: 800 kN Chodpfx Ajy U I Tusmhoa Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic Applicator Application Area The thermoplastic applicator applies a thermoplastic material to rectangular glass panes within a production line for solar modules. The material forms a seal with a second glass pane, which is applied in a later process step. The panes are fed in, processed, and removed on horizontally running belts/conveyors. The thermoplastic applicator is a highly sophisticated machine that must meet many requirements with great precision. For this reason, you should only process raw materials (glass, sealant) that meet the specifications on the following pages. This helps to achieve high-quality and safe production. Performance and Connection Values Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant bead: 0.5 to 1.2 mm Maximum width of the applied sealant bead: 12.0 mm Required constant input pressure, pneumatics: 6.5 to 8.0 bar Operating pressure, pneumatics: 6.0 bar Csdpezdyh Hefx Amheha Compressed air consumption, normal operation: 10 normal liters/min Compressed air consumption during drum change: 500 normal liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Environmental Conditions and Emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity: 75% Sound level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material container D18 according to DIN 6644 – with base (F1) and smooth outer surface (body design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Processable glass panes Glass types Glass panes with a smooth surface (float glass) can be processed. Dimensions and Weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastic materials based on poly-isobutylene (butyl) can be processed. The material must be flowable in the range of approximately 110°C to 130°C and exhibit a defined viscosity profile. Use only materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic for the intended use. Detailed product descriptions and information on the handling, storage and disposal of the material used can be found in the information sheets and safety data sheets, which the manufacturers of the materials will gladly provide. Dimensions, gantry robot with glass conveyor Height x Width x Depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Dimensions, drum pumps Height x Width x Depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H at drum pump FP1: 4400 mm Height H at drum pump FP2: 4000 mm Dimensions, control cabinet Height x Width x Depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material Butyl. Condition: used From a test laboratory, in like-new condition, only a few operating hours for testing! Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 19,032 h, laser power: 6,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, number of axes: 3, This 3-axis Bystronic BySprint Fiber 4020 + optional ByTrans Extendend 4020 was manufactured in 2018. It features a powerful 6 kW fiber laser with a working area of 4,000 × 2,000 mm. The machine includes an automatic loading and unloading system for enhanced efficiency. If you are looking to get high-quality fiber laser cutting capabilities, consider the Bystronic BySprint Fiber 4020 + optional ByTransExtendend 4020 machine we have for sale. Contact us for further details. BySprint Fiber 4020 • Laser Source: Fiber Laser • Laser Power: 6 kW • Maximum Laser Power: 6000 W • Working Area / Table Size: 4,000 × 2,000 mm • Overall Dimensions: Approx. 12 × 3 m (including ByTrans Loading System) • Machine Weight: Approx. 14,250 kg • Laser Wavelength: 1060–1080 nm • Operating Hours: 36,725 h • Cutting Hours: 19,032.02 h • Machine Condition: Used, Fully Functional, Currently in Production • Documentation: Included • Operating Manual: Included • Spare Parts: Small Quantity of Wear Parts Included Optional – ByTrans Extended 4020 • Automation System: ByTrans Extended 4020 Chsdpozhvzdjfx Amhea • Number of Cassettes: 2 • Maximum Sheet Size: 4,064 × 2,080 mm • Nominal Sheet Size: 4,000 × 2,000 mm • Sheet Thickness (Loading/Unloading): 0.8–20 mm • Maximum Sheet Weight: 1,300 kg • Maximum Raw Material Stack Weight: 3,000 kg • Maximum Raw Material Stack Height: 240 mm • Maximum Cut Parts Stack Height: 350 mm • Standard Cycle Time: 75 s • Module Weight: 7,200 kg • Maximum Electrical Consumption: 6 kW • Maximum Compressed Air Consumption: 10 m³/h

Condition: ready for operation (used), Year of construction: 2006, pressing force: 150 t, stroke length: 215 mm, operating speed: 190 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 400 mm, total length: 4,100 mm, total width: 2,050 mm, total height: 2,600 mm, Equipment: CE marking, documentation/manual, Capacity: 3100 x 150 tons CNC control on axes Y1, Y2, X, R, Z1, and Z2 Cybelec ModEva 12 CNC control Hydraulic upper clamp RFA Codpfx Aszqz Emomhoha Hydraulic lower clamp Wila, 13 mm

Condition: excellent (used), Year of construction: 2009, Press force: 100 t Bending length: 2050 mm Chsdpfxezclczj Amhja Stroke: 215 mm Open height: 500 mm Overhang: 400 mm Column spacing: 1700 mm Back gauge: X-R-Z Motor power: 7.5 kW Weight: 7400 kg Year of manufacture: 2009

Condition: excellent (used), Year of construction: 2011, Bystronic Xpert 150 press brake with Bystronic CNC control, bending length: 4100 mm, max. force: 1500 kN, max. stroke: 215 mm, automatic stops, Bystronic Fast Bend laser system. Serial number: 11530057 (2011). Machine weight: 11,800 kg. Country of origin: Germany. Axes: Y – Raise/lower beam X – Adjustment of approach and bending distance Codsyrnfdspfx Amhjha R – Approach/retract position 2 x Z – Lateral and relative positioning 1 x Z – Manual feed

Condition: excellent (used), Year of construction: 2008, pressing force: 100 t, Press force: 1000 kN (100 tons) Bending length: 2050 mm Codpfx Amezclc Ishoha Stroke: 215 mm Opening height: 500 mm Overhang: 400 mm Column spacing: 1700 mm Back gauge: X, R, and Z axes Accuracy of Y-axis: ±0.004 mm Motor power: 7.5 kW Weight: 7400 kg Year of manufacture: 2008

Condition: excellent (used), Year of construction: 2010, control type: CNC control, controller manufacturer: SIEMENS, controller model: SIEMENS 840D, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 170 mm, feed rate X-axis: 80,000 m/min, feed rate Y-axis: 80,000 m/min, overall weight: 20,000 kg, total length: 12,000 mm, total width: 6,000 mm, total height: 6,500 mm, Laser cutter BYSTRONIC - ByLaser 4400 MACH-ID 9635 Make: BYSTRONIC Type: ByLaser 4400 Control: SIEMENS 840D Year: 2010 BYSTRONIC BYTRANS Loading arms with change position BYSTRONIC BYTOWER Plate storrage  Change Table foir in and out feed manipulation Dust collector 5.0 inch cutting head 7.5 inch cutting head Under power insopections possible ! Working area X Axis: 3048mm Chsdpfx Amsy U Httshea Working area Y Axis: 1524mm Working area Z axis: 170mm Table Length: 3000mm Table Width: 1500mm Power resonator: 4.4kW / Amp Feed rate X-Axis: 80000mm/min. Feed rate Y-Axis: 80000mm/min. Sheet master loading arm:Yes, BYTRANS Sheet tower storage: Tes, BYTOWER Dust collector: Yes Cutting hours: 26000H Length: 12000mm Width: 6000mm Height: 6500mm Weight: 20000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Completely new resonator available at the end of 2025 with 6,000 watts + New laser cutting head (investment approx. EUR 190,000 in 2025) Immediately available - inspection possible Manufacturer: Bystronic Model: BySprint fiber 3015 Year of manufacture: 2022 / new resonator and cutting head in 2025 Sheet metal format: Max. format, 4,000 x 2,000 mm Operating hours: After upgrade at the end of 2025: approx. 1,400 operating hours, approx. 550 cutting hours Before upgrade until 2025: approx. 17,700 operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyors in the cutting area - Dust extraction system with 200-liter drum adapter - Upgrade in 2025: 6,000-watt fiber laser with new cutting head Standard equipment: BySprint Fiber 4020 Pallet changer system with 2 pallets Closed enclosure/roof Cjdpfx Ajzh E Ugomhjha Scrap conveyor with rollers CNC control and cabinet Touchscreen with user interface for ByVision Operation and comfort Maintenance Messenger Restart Manager System Manager Handheld operating device ByHand Cutting parameter assistant Uninterruptible power supply (UPS) Cutting bridge OPC interface cutting Cutting head Piercing Jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heater Tropicalization Interface to automation/handling Cooler Operator protection in the cutting area Operator protection in the loading/unloading area Voltage 400V / 50Hz Compressed air (machine incl. laser source and cooler) Material specification Part tolerances and cut surface quality Cutting gas supply and cutter quality TECHNICAL DATA: Maximum positioning speed parallel to the axes X/Y: 100 m/min Maximum positioning speed simultaneously: 140 m/min Positioning deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Positioning scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Maximum workpiece weight: 1580 kg Table change time: 35 seconds Laser power: 6,000 watts Maximum sheet metal thickness: Steel: 30 mm Stainless steel: 25 mm Aluminum: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, cooler): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height This used machine can be inspected under production conditions. All information is without guarantee - sale is made excluding any guarantees or warranties. Subject to prior sale.

Condition: good (used), 200 bar / Class 1 / D9KA Application: Gas filling systems Width: 185 mm Height: 210 mm Depth: 60 mm Chjdpezfy U Aefx Amhea Weight: 1176 g Condition: good, second-hand

Condition: used, Year of construction: 2019, machine/vehicle number: T17157, functionality: fully functional, operating hours: 32,000 h, input voltage: 40,000 V, input current: 4,000 A, input frequency: 10,600 Hz, type of input current: three-phase, oil tank capacity: 300 l, total length: 42,400 mm, total width: 11,200 mm, total height: 5,100 mm, overall weight: 107,250 kg, year of last overhaul: 2026, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, FOR SALE – BYSTRONIC FL400 TUBE & PROFILE LASER CUTTING SYSTEM High-Performance Laser Cutting Machine for Tubes, Profiles and Structural Sections As part of a strategic investment and the acquisition of a new MAZAK FG-400 NEO tube laser system, we offer for sale our Bystronic FL400 laser cutting machine. The machine has been operating in a professional steel service center and remains in daily production use. It is offered for sale due to replacement with a new system. _____ General Information: Machine: Bystronic FL400 Year of Manufacture: 2019 Installation & First Commissioning: October 2019 Current Location: Mikołów, Poland Condition: Fully operational and currently in production _____ Technical Specifications: Laser Source • CO₂ Laser Source Codpezqudpofx Amheha • FANUC Resonator • Laser Power: 4,000 W Loading & Unloading Capacities • Maximum Loading Length: 14,000 mm • Maximum Unloading Length: 12,500 mm • Maximum Material Weight: 140 kg/m Round Tubes • Minimum Diameter: 40 mm • Maximum Diameter: 406.4 mm Square Profiles • Minimum Dimension: 40 mm • Maximum Dimension: 300 mm Rectangular Profiles • Maximum Section: 300 × 200 mm Structural Sections • HEA / HEB: 100 – 280 mm • IPE: 80 – 360 mm • UPN / UPE: 40 – 240 mm • Angle Sections (L): 40 – 280 mm Maximum Material Thickness • Mild Steel: 20 mm • Stainless Steel: 8 mm • Aluminum: 6 mm Operating Status • Resonator Operating Hours: approximately 32,000 h • Machine remains in regular production operation _____ Additional Information The machine has been operated in a professional Steel Service Center specializing in the processing of steel tubes, profiles, and structural sections. The equipment is available for inspection under power at our facility in Poland. Photographs, sample production parts, and videos of the machine in operation are available upon request. _____ Documentation and Technical Details Detailed technical specifications, machine documentation, maintenance records, and additional operating information will be provided to qualified buyers upon request. Disassembly, packaging, and transport of the machine are the responsibility of the buyer.

Condition: used, Bystronic Xpert 250x4100 - CNC Press Brake Bending length: 4100 mm Capacity: 250 t - Bystronic 2D and 3D graphics control, ergonomic operating terminal with 15-inch color monitor - 8 axes (Y1, Y2, X, R, Z1, Z2, A1, A2) - AKAS laser safety device, manually adjustable in height - Hydraulic crowning - Air bending - Radius bending - Without tooling - Includes operating manual - Year of manufacture: 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installed height (clearance between lower and upper beam): 550 mm - Distance between side supports: 3750 mm - Overhang: 400 mm - Back gauge area: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - R-axis travel: 250 mm Chsdpfxozizybj Amhja - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-working speed: 1 - 10 mm/s - Y-working speed for robot operation: 1 - 12 mm/s - Y-return speed: 150 mm/s - Crowning: hydraulic - Adjustable support arms: 750 mm - Maximum surface pressure without wear strip: 100 N/mm2 - Maximum surface pressure with wear strip: 120 N/mm2 - Oil capacity (tank volume): 610 l - Noise emissions: 74 dB(A) - Main motor power: 22 kW - Voltage: 3x 400 V / 50/60 Hz - Transport dimensions WxHxD: 5200 x 3200 x 2100 mm - Weight: 19200 kg

Condition: used, Year of construction: 2007, Bystronic AFM EP 31-160 - CNC Press Brake Bending length: 3100 mm Capacity: 160 t - Cybelec DNC 880S CNC control - Laser safety device - Hydraulic crowning - Air bending - incl. many tools - incl. operating manual - Operating hours: 7266 Chedpfxoziduzj Amhoa - Bending cycles: 315673 - Year of manufacture: 2007 Technical data - Capacity: 160 t - Table length: 3150 mm - Work table width: 60 mm - Working height: 920 mm - Distance between side frames: 2450 mm - Overhang: 300 mm - Opening height: 465 mm - Number of cylinders: 2 - Stroke: 200 mm - Approach speed: 100 mm/s - Bending speed: 9.8 mm/s - Retraction speed: 95 mm/s - Tilting of the upper beam: +/- 13 mm - Crowning: Hydraulic - Air bending: Yes - Adjustment of the upper tool: Manual - Adjustment of the die: Manual - Number of fingers on the ram: 2 - X-axis travel of the ram: 600 mm - X-axis movement: 600 mm - Min. X-axis movement speed: 400 mm/s - R-axis movement: 150 mm - R-axis traverse speed: 150 mm/s - Z1-Z2 movement: 2400 mm - Z1-Z2 traverse speed: Manual - Accuracy of the X-axis: 0.1 mm - Accuracy of the Y-axis: 0.01 mm - Accuracy R-Z1-Z2: 0.1 mm - Accuracy Z1-Z2: Manual - Above-floor installation: Yes - Machine dimensions WxHxD: 4100 x 2680 x 2200 mm - Motor power: 15 kW - Machine weight: 9400 kg