Used Capacitor for sale (59)

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Including selectable frequency, in steps of 1kHz, range 180-300 kHz Fully revised in 2026 by Thermatool specialists Technical specifications · Input voltage: 3 x 380 V · Input current: 525 A · Welding frequency: 180 - 300 KHz · Output power: 350 kW · Auxilirary service voltage: 24Vdc · PLC Siemens S7 1. DC Power supply • SCR Power Controller/Stabilizer - Provides constant output power for consistent weld quality. • Rectifier Circuit achieving 6 pulse Rectification. • Solid State Low Ripple Filter - Reduces AC line harmonics and switching transients that can affect weld quality. • AUTOMATIC SPEED POWER CONTROL Automatic Speed Power Control - Automatically ramps power up and down in line with mill speed, minimizes scrap on stopping and starting. • PLC - Controls and monitors welder operation sequences and provides fault and running data for the Alphanumeric display 2. CFI 350KW VF Solid-state HF welder • Compact rugged enclosure - sealed and internally cooled. Provides small footprint whilst ensuring reliable performance in harsh mill environments. • Water cooled high frequency MOSFET power transistor modules – Modular design provides maximum flexibility, long equipment life and reduces time for maintenance. • AUTOMATCH Automatic Load Match – Fully automatic series and parallel load matching system which enables the welder to run at optimum efficiency with guaranteed frequency stability - Assists the tube producer in maintaining repeatability. • High frequency capacitor bank - Designed specifically for the Tube Welding application. Capacitors deliver high power with low voltage to minimize flashovers at the induction coil. • Water flow and temperature protection. • Output bus-bar system - Externally water-cooled for ease of maintenance. INCLUDING SELECTABLE FREQUENCY Selectable frequency, in steps of 1kHz, range 180-300 kHz 3. Remote control console • Display - provides operator and maintenance personnel a constant display of fault and running data for maximum productivity. • Power Control - Preheat and Main power potentiometers ensure precise setting of weld power and minimizes un-welded tube thus reducing scrap. • Pushbuttons and Control Switches - For safe simple operation and protection of plant personnel. Analogue Indication Meters - Provide back-up for Alpha Numeric display. Knjdpfxoymadbo Afwja 4. Closed loop cooling system • Plate Type Heat Exchanger - High efficiency reducing raw water consumption. • Stainless Steel Water Pump & Plastic Pipework • Automatic Temperature Control Valve - Maintains a constant water temperature thus avoiding condensation inside the equipment. • Header tank with Level Switch. Comprehensive equipment inspection, supervised by a Thermatool specialist. Input voltage: 3 x 380 V Input current: 525 A Welding frequency: 180 - 300 KHz Auxilirary service voltage: 24Vdc PLC: Siemens 7

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. Knjdozn N Ecepfx Afwja • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Operating hours: 3,888 h, condition: good (used), Heraeus Xenotest 1200 CPS weathering tester Xenon device for testing the lightfastness and weather resistance of materials under simulated conditions Electrical connection Voltage: 400 V Nominal current: 50 A max. Connected load: 33 kVA max. Power consumption of xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors, 50 uF each Knjdpexal Haofx Afwoa Operating hours: 3888 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Thread Cutting Machine Berg + Schmid Delta 4 Product Description Ksdoyy S Efopfx Afwsna Cutting range: R 1/3 - 4", M8-M52 Powerful capacitor motor 230V-1 kW, exceptionally quiet operation 3 speeds: 15+27+58 rpm (also under full load, built-in gearbox) With 2 automatic thread cutting heads: R 1/2 -2", R 2 1/2 - 4" Complete with cutting dies: R 1/2 - 3/4", R1"-2", R 2 1/2 - 4", conical DIN 2999 Automatic cooling directly through the cutting head Quick-release chuck, pipe cutter, internal pipe reamer Includes occupational safety equipment with safety foot switch and 4 support legs

Year of construction: 2016, condition: used, THERMATOOL CFI 200 HF Welder for tube production, 200 kW solid-state high frequency welding system, manufactured in 2016. THERMATOOL CFI 200 HF Welder, designed for reliable high-frequency welding applications with advanced automatic load matching AUTOMATCH and THERMAVIEW remote control. With interconnecting cables, it is ready for re-installation. In excellent worling conditions. TECHNICAL SPECIFICATIONS - Manufacturer: THERMATOOL - Model: CFI 200 - Year: 2016 - Continuous Output Power: 5 - 200 kW - Nominal Welding Frequency: 400 kHz - Total System Power: 307 kVA - Input Voltage: 400 V - Input Frequency: 50 Hz - Input Current: 464 A - Control Voltage: 110 V SCOPE OF SUPPLY HF CABINET - Compact Rugged Enclosure Design - Water Cooled High Frequency Power Transistor Modules - High Frequency Capacitor Bank - Single Axis Table. - Water Flow and Temperature Protection - ‘Automatch’ - Automatic load matching system - Output Weld Lead Assembly DC CABINET Power Supply - SCR Power Controller/Stabiliser - Solid State Low Ripple Filter - Automatic Speed Power Control Knedpfx Afjzi Twrswsa - Heavy Duty Power Transformer THERMAVIEW Remote Control Console - PC Panel with Thermaview software - Power Control - Pushbuttons and Control Switches - Analog Indication Meters OUTPUT BUSBAR - Straight output busbar CABLES / PIPING - Existing interconnecting cables - Existing distilled water interconnecting piping WORKCOILS - 5 workcoils in the range 25 – 76.2mm BENEFITS ✓ Solid-state technology for reliable operation ✓ Automatic load matching to optimize welding performance ✓ Integrated THERMAVIEW control for convenient operation and monitoring ✓ Suitable for a wide range of tube diameters with five included work coils ✓ Designed for efficient production and dependable welding performance For more information, contact Continuous Output Power: 5 - 200 kW Nominal Welding Frequency: 400 kHz Total System Power: 307 kVA Input Voltage: 400 V Input Frequency: 50 Hz Input Current: 464 A Control Voltage: 110 V

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine. • Swivel head: ±90° • Spindle & drives (INDRAMAT): • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm • Axis drives: • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Net filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: Knjdpeya D Svofx Afwsa • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V • Axes: ESM 2.1-SMT-02V Technical Specification Taper Size SK 40

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Knjdpfx Aoy Stahjfwoa Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Year of construction: 2011, condition: used, Designation: Battery Simulator Knedpfx Aoy Nzakefwoa Manufacturer: Kratzer Model: VES2 150KW 600V +/- 600A Battery Simulator / Vehicle Energy System · Highly dynamic, bidirectional converter for e-mobility component testing in the automotive industry · IGBT technology, water cooling · Grid connection with feedback capability and low grid interference · Galvanic isolation with medium-frequency transformers · Selectable control schemes and user-defined control parameters for adaptation to a wide range of test scenarios · Integrated simulation module for emulation of resistors, batteries, and capacitors · No switching time between source and sink operation · Low noise due to high switching frequency and water cooling Item condition: Used item as shown in the pictures Please contact us if you have any questions Shipping: The specified shipping costs apply to deliveries within Germany Worldwide shipping (please enquire for shipping costs outside Germany) The given shipping costs apply to a shipment within Germany Sale to business customers only, without warranty or guarantee. Technical data deviations and errors in the item description may occur and are subject to change.

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Knedpfx Aoywztgofwea Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools