Used Contactor for sale (212)

Condition: good (used), functionality: fully functional, Function-tested; item originates from dismantling of a system from an automotive supplier Manufacturer: Siemens Model: 3TC5617-0A Type: Power Contactor Rated Voltage: 230 V AC Rated Operational Current: 40 A Frequency: 50/60 Hz Contacts: 3-pole (3 NO) Mounting: Screw or DIN rail mounting Function: Switching of motors, heaters, or industrial loads Series: Sirius Fjdpfx Aajyq Sbtjnsgi

Condition: used, Siemens SIRIUS power contactor with two mounted auxiliary switch blocks, 3RH1921-1JA11 and 3RH1921-1DA11, for industrial switching and motor applications. Manufacturer: Siemens Product series: SIRIUS Fgjdpszupbkefx Aanei Type: 3RT1056-6AP36 Device type: Power contactor Number of poles: 3-pole Rated operating current Ie AC-1: 215 A Rated insulation voltage Ui: 1000 V Rated operating current Ie AC-3 at 230 V: 185 A Rated operating current Ie AC-3 at 400 V: 185 A Rated operating current Ie AC-3 at 690 V: 170 A Rated operating current Ie AC-3 at 1000 V: 65 A Motor power AC-3 at 230 V: 55 kW Motor power AC-3 at 400 V: 90 kW Motor power AC-3 at 690 V: 160 kW Motor power AC-3 at 1000 V: 90 kW Standard: IEC/EN 60947-4-1 Auxiliary switch block 1: Siemens 3RH1921-1JA11 Auxiliary switch block 2: Siemens 3RH1921-1DA11 Rated insulation voltage of auxiliary switch blocks: 500 V AC-12 at 230 V: 10 A AC-15 at 230 V: 6 A

Condition: used, functionality: unexamined, “functionally tested; item originates from the dismantling of equipment from an automotive supplier” More than 10 units available Manufacturer: Siemens Model: 3TC5617-0A Type: Power contactor Rated voltage: 230 V AC Fsdpfezhnyrex Aansgi Rated operating current: 40 A Frequency: 50/60 Hz Contacts: 3-pole (3 normally closed) Mounting type: Screw or DIN rail mounting Function: Switching of motors, heaters, or industrial loads Series: Sirius

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN347467, functionality: fully functional, Chamber furnace, fully overhauled, 12-month warranty -Maximum temperature 650 °C -Internal dimensions W x D x H: 600 x 750 x 600 mm -External dimensions W x D x H: 1250 x 1700 x 1750 mm Fsde Aivvhspfx Aansgi -Capacity: 250 liters -Nabertherm controller -Pneumatic lift-up door -Heating time to maximum temperature: 90 minutes -1 bottom plate -1 internal plate (3 additional plates available at an extra charge) -Additional thermocouple (batch thermocouple) -Extra 50 mm feedthrough -No exhaust, no controlled cooling -Weight: 650 kg -Power consumption: 20 kW -Documentation, CE declaration -Electrically tested and with current DGUV test report The furnace has been overhauled. All contactors and relays have been replaced. Heating elements have been inspected and measured. Very good condition. Inspection by appointment. Furnace, furnaces, muffle furnace, industrial furnace, chamber furnace, firing furnace, sintering furnace, annealing furnace, laboratory furnace, hardening furnace, ceramic furnace.

Condition: excellent (used), Protective control unit Fgsdpfjf Ey Edex Aanji Polu Box Manufacturer: DEMAG Includes documentation

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Fgedeyw Rzaepfx Aanji Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: new, SIEMENS contactor 1st type - 3 TF 46 - 3 pieces Fsdpou U Ulgofx Aansgi 2nd type - 3 TF 48 - 1 piece 3rd type - 3 TF 54 - 1 piece 4th type - 3 RT 1054 - 1 piece 5. type - 3 RT 1075 - piece 6. LC 1D 65008 - 1 piece

Condition: used, 5 Fjdpfxozrxqij Aanegi 5 kW as good as new

Condition: used, Barrenschütz, DC contactor, contactor, DC switch, power contactor, power switch, high-voltage switch ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: Normally open main contacts Design: Open, mounted on a bar Actuator: AC + laminated magnetic circuit + rectifier + shunt resistor Actuator rated voltage: 220-230 V / 50-60 Hz Main contact rated current: 63 A Main contact rated voltage: 1500 VDC Number of main contacts, normally closed: 0 Number of main contacts, normally open: 3 Number of auxiliary contacts: 1 normally open + 1 normally closed + 1 changeover Auxiliary contact rated current: 6 A - Main contacts with deion chambers for rapid arc quenching Dimensions W x H x D: 410 x 250 x 195 mm Fjdpfofipfuox Aanogi Weight: approx. 9 kg Used, but in very good condition.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VKE / FLPS2 – 4APC/S, type of input current: three-phase, Automatic Vertical Strapping Machine VKE / FLPS2 – 4APC/S Current Status & Availability: The strapping system is fully operational and is currently still in daily use. Availability: The entire system is currently fully integrated into the production process and can be inspected under operating conditions after prior arrangement. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47 / 2026. Technical Data: Pallet Types: Pallet width 500 to 1000 mm Pallet length 600 to 1200 mm Package height (incl. pallet) min. 500 - max. 2000 mm Conveyor height 500 mm Weight (incl. pallet) 150 to 1000 kg Package stacking method: automatic Under-stretching: no Conveyor speed: 12 m / min Pallet transport direction: lengthwise onto lengthwise boards Fjdpfjy Szflox Aanjgi Centering accuracy: centered on the stop light barrier Machine Components: Pneumatics: Festo Gear motors: SEW Control system: PLC S7-200 Control cabinet: Rittal Protection class: IP 55 Main switch: Möller Fuses: Siemens Relays: Omron Push buttons: Siemens Signal lights: Telemecanique Light sensors / light barriers: Datalogic Inductive proximity sensors: Omron / Siemens Cam switches: Siemens Contactors: Telemecanique

Condition: used, Year of construction: 2015, functionality: fully functional, This is a 100-liter electric tilting, rapid-cooking kettle from the premium manufacturer MKN, type Optima 850. After a comprehensive inspection, the unit is in flawless, good used condition, with a 6-month warranty on all electrical parts. !!! Price upon request !!! You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Checked & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1200 x 850 x 700 mm Inner kettle: Diameter 665 mm, 500 mm deep Power connection: V: 400 / kW: 21 Weight: 225 kg Serial number: 15202757 Type: 2023007S Nominal capacity: 113 liters Usable capacity: 100 liters Year of manufacture: 2015 Electromotive tilting device with hand switch Inner kettle: Ø 630 mm, 397 mm deep, material 1.4404 Heating time: 26 min. Power selector switch Limit switch Temperature controller Safety temperature monitor Indicator lights Tube heating element Pilot heating element Contactor Water solenoid valve Level controller with level electrode Electrical fixed connection IPX5 Fittings: Vent and bleed valve, safety valve Condition: Used, major inspection carried out, fully functional Fodpo Af Itvsfx Aanogi Further information: Double-jacketed kettle with separate, integrated and maintenance-free steam generation system VAPRO for rapid heating times and low energy and water consumption as well as high efficiency Short heating times thanks to the rapid steam system VAPRO - protects the food and saves time Automatic monitoring and replenishment of operating water, ensuring constant readiness for operation Standard equipment with 3 cooking levels (gentle simmering, medium and strong boiling) Thermostatic or electronic temperature control Standard with double-walled hinged lid and mixing tap The tilting angle of the kettle of more than 90 degrees makes pouring, emptying and cleaning easier Ideal kettle support prevents the pouring jet from shifting and guarantees complete emptying The large pouring height allows for problem-free emptying into larger containers All fittings and instruments are integrated into the side frame Tilting manually or electromotively Standard prepared for connection to an energy optimization system with a potential-free contact Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions.

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) Fedpezlktpofx Aanegi -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Year of construction: 1976, condition: used, machine/vehicle number: WR2, Demag overhead crane Crane canopy Crane runway Indoor crane Crane Payload / lifting capacity 5t - 5000KG, track 13900mm Outer dimension with endcarriage approx. 14000mm Rope hoist P-pull P412 M11 - 4 strand with fine lift Year of manufacture 1976 with floor control Overall height top edge of crane to hook approx. 1000mm Endcarriage length with buffer approx. 3000mm Lifting height rope hoist 5500mm Fgodpfjrnmzzjx Aanoi Weight approx. 3200KG Control system overhauled, new contactors etc. installed, cable towing with towing chain added Crane is dismantled, available immediately from location 79664 Wehr. Inspection book is available Good used condition Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agent possible, please ask for zip code Collection preferred

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, contactor type 3TF4322-0BB4 Fjdpfx Ash Rf Nhoanjgi -Number: 4x available -Price per piece -Dimension: 85/45/H140 mm -Weight: 0.7 kg/pc.

Condition: used, The Compact Series The new Wanner shredding mills in the C series (“C” stands for “compact,” “s” stands for “silent,” meaning noise-optimized) offer practical solutions for almost all challenges related to in-line recycling of sprues and defective parts in the production process. Thanks to their modular design, the shredding mills in the C series can be easily adapted to the specific application or the needs of the operation. Depending on the method of feeding the sprues, the disposal of the ground material, or the injection molding machine being used, the C series from Wanner offers optimal solutions that can be adapted to your specific operational processes through a variety of standard components. The optimized cutting geometry and low rotor speed guarantee high-quality ground material with a low dust content. Sound-insulated feed hoppers and the noise-optimized shredding chamber design contribute to a low noise level with regard to structure-borne noise and natural frequency. The large-sized gearbox ensures a long service life for the shredding mills and also allows for extremely compact dimensions. The shredding chamber can be opened very easily with just a few steps, which saves time and thus costs, for example, during cleaning due to a change of color or material. The advantages of the C series: easy adaptation to the specific application through a modular system compact design requires only a small footprint next to the injection molding machine robust, cast/steel housing mounted on swivel casters durable motor/gearbox unit for a long service life significantly reduced noise through angled-cut rotor and vibration-optimized shredding chamber design easy handling and simple cleaning, saving time and costs improved feeding behavior of bulky sprues and ground parts thanks to the optimal rotor geometry Fgjdpfx Aaezc Nydenei shredding chamber with hardened inserts for minimal wear with GF materials high-quality and low-dust ground material thanks to the optimized cutting geometry. The rotating disc in the side wall reduces friction and thus heating and damage to the ground material. blades can be easily re-sharpened without a special device sound-insulated and tamper-proof feed hoppers Technical data: Manufacturer: Wanner Type: C17.26sv Shredding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20-25 kg/h Screen size: 3-8 mm Voltage: 400 Volt/ 50 Hz Suction container: approx. 6 l Suitable for GF materials as standard Control: Contactor control with overcurrent protection switch electrically redundant design with self-monitoring safety relay according to EN 12012 5 m connection cable Weight: 155 kg Year of manufacture: Product video “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste Fgodpfjtywzqox Aanoi The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months Fsdozfyu Aepfx Aanogi - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table Fgsdpfx Aaez I Ub Hsnei - Transfer function of the spindle speed as set value

Condition: used, machine/vehicle number: 6694, We are offering our laminating line for sale. The following components have already been serviced/overhauled: · Overhaul or cleaning of the sheet feeder drive unit in 2025 · New main drive 2024 with frequency converter (manufacturer SEW) · Overhaul of temperature control units (2 pcs.) in 2022 · Dryer drum and laminating roller · Heaters, level switches, and power contactors have been replaced. Fjdpfxeyt Iprs Aanegi · Slip clutch separator overhauled in 2023 · Application roller modified with motor and frequency converter (manufacturer SEW) in 2017 The machine is still in operation and is being sold due to a reduction in our machine fleet.

Condition: excellent (used), For sale: 2 complete ABB ACS880 Multidrive systems, consisting of a total of 18 electrical cabinets (9 cabinets per system). These industrial drive systems originate from a former steel production facility in the Netherlands and are reported to have been in operation for approximately one year only. Both installations are offered as complete systems, including ABB inverter modules, supply/rectifier modules, main circuit breakers, control electronics, copper busbars, and associated electrical components. Main Components 10 × ABB ACS880-104-0600A-7 – Inverter Modules Fgjdpfx Aao Agfnpenei 8 × ABB ACS880-304-0820A-7 – Supply / Rectifier Modules 4 × ABB SACE Emax2 E2.2S 1600A – Main Circuit Breakers Additional Equipment Extensive copper busbar systems ABB control and protection electronics Electrical control components Contactors, relays, and circuit protection devices Internal power and control wiring Cooling and ventilation equipment Heavy-duty industrial electrical cabinets System Details Manufacturer: ABB Series: ACS880 Multidrive Quantity: 2 complete systems Total cabinets: 18 (9 per system) Condition: Used – visually in good condition Previous application: Industrial steel production Operating history: Reportedly approximately 1 year Documentation: Technical drawings available Location: Rotterdam, The Netherlands Availability: Immediately available from stock Additional Information The ABB ACS880 Multidrive series is designed for demanding industrial applications requiring multiple motor drives, centralized power supply, and advanced motor control. These installations may be of interest for industrial reuse, system integration, drive refurbishment, or recovery of valuable ABB components. Both systems are currently stored at our warehouse in Rotterdam and are available for inspection by appointment. Complete systems preferred – sale as one lot. Additional photographs, component details, and technical drawings are available upon request. Terms of sale: EXW Rotterdam, The Netherlands. Surplus equipment sold as is, where is, without warranty, claims, or returns.

Condition: used, functionality: fully functional, machine/vehicle number: 1232, Jumberca SFJ single-face circular knitting machine, machine number 1232. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). NAMEPLATE DATA: · Diameter: 30 inches / 762 mm · Gauge: 20 · Number of needles: 1920 · Manufacturer: Jumberca S.A., Badalona, Spain APPLICATION: Single-face knitted fabrics: jersey, pique, and derivatives for outerwear, sportswear, and underwear. Fgjdpfx Ajzvh D Heanoi EQUIPMENT INSTALLED: · Memminger-IRO type TPF 20-G feeders with yarn stop · Memminger-IRO Pulsonic 3-Mini lubricator · Hengstler counters · Complete upper cam set · Electrical panel with LOYJE 13.220 contactors and transformers · Drive system with pulleys and mechanical variable speed drive CONDITION: Complete machine, fully assembled. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, auxiliary contactor -Siemens: Type 3RT2027-1CL24-3MAO -Dimensions: 90/50/H145 mm Fgsdofifk Djpfx Aansi -Weight: 0.5 kg

Condition: used, Heraeus Vötsch HC 4055 Temperature Test Chamber Manufacturer: Heraeus Vötsch Type: HC 4055 Temperature Chamber Temperature range: +180°C Rated voltage: 380V, ±10%, 3/N, 50Hz Rated current: 13.5 A Rated power: 9 kW Housing dimensions: W 1065 x D 1560 x H 1890 (mm) Observation window: Width x Height 350 x 640 mm Fgjdpfsuuilvox Aanji Test chamber: (L x W x H) approx. 800 x 795 x 855 mm Test chamber volume: 550 l Chamber is air-cooled Attention: Chamber can only be operated as an oven. Refrigeration circuit is empty and deactivated. Climate system is deactivated. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan 15K6 Blind heating Semiconductor relay 21V4 Humidifier. Weight approx. 550 kg More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0803024, functionality: fully functional, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm Fjdpfev Tzw Ejx Aanegi - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, STORTI FLEX + GSI 150 Automatic Pallet Nailing Line (Robotics and High Production) GENERAL DESCRIPTION: A complete, highly automated industrial installation for manufacturing wooden pallets and pallet tops is available for sale. The line combines the structural and hydraulic robustness of STORTI S.p.A. with modern technological and robotic upgrades. The facility is currently fully operational, having recently undergone a comprehensive overhaul and critical maintenance procedures. TECHNICAL SPECIFICATIONS AND COMPONENTS: The line features an advanced, fully interconnected modular architecture: Module / System Technical Model Key Features Year Central Mechanical Nailer STORTI FLEX 50M High-speed, heavy-duty monoblock gantry. 9 independent nailing heads, brushless synchronous servomotors, and a multi-format oscillating hopper. 2014 Robotic Cell ROBOT WORK-STATION 2-axis robotic station for handling and pneumatic 90° rotation of pallet tops/decks. 2014 Cartesian Robots 3 Units Fgodpfsz Sfbnex Aansi Integrated Cartesian systems for workflow automation. 2014 Hydraulic Nailer STORTI GSI / 150-TA Heavy-duty assembly core. Equipped with 24 nailing heads, a frame with multi-format molds (7 molds), and an 11 kW hydraulic power unit (60-65 bar). 2004-2006 Block Dispenser STORTI DAT / 2000 Automatic block/stringer feeder using a high-friction belt and pneumatic actuators. 2004-2006 Outfeed Mechanization – MODULE 7 (Storti) Finishing line including: Corner cutter (GSM/3), board milling machine, marker/stamper, pallet turner (GSA/180), and automatic stacker (AGS/230). Transfer Units STORTI GSD 4 FLEX Angular transfer unit featuring rollers and lifting chains. • Format Capacity: From a minimum of 700 x 700 mm to a maximum of 1500 x 1500 mm. • Electronics and Control: Centralized via HMI touchscreens (Schneider Electric Magelis / ESA VT100) and Schneider Lexium servo-drive technology using the CANopen protocol. RECENT MAINTENANCE HISTORY The machine is in excellent condition thanks to a comprehensive overhaul that includes: • Replacement of the gantry servo-motor cable. • Replacement of alignment bushings on the Flex 50 legs and installation of new hammers (4 units) with their respective pins. • Repair and tuning of the pallet front-cutting saw and the pneumatic cylinders for the milling units. • Repair of the tilting conveyor shaft and welding/turning of the gantry turner drive shaft. • Replacement of optical sensors, mechanical sensors, and magnetic contactors.