Used Carriage for sale (1,766)

Year of construction: 2017, condition: excellent (used), coil width: 1.650 mm Ksdjlimtcspfx Addsdg coil weight: 15 t stroke: 600 mm year: unknown / overhauled in 2017

Condition: used, Fork carriage with hydraulic sideshift + long forks suitable for STILL type EFG 3.0/6004. Fork carriage width: 1.100 mm Tine length: 1.900 mm Kjdpfxev Rmvbj Addodg Tine cross-section: 100 x 45 mm

Year of construction: 2018, condition: new, machine/vehicle number: DF0246 Rev0, Tol measurements:2500 x 1800 weight max.:20 t range L-W-H:1920 x 2818 x 1140 mm :1000 - 2000 mm Kdjdpfx Adjdxvfmodsg :700 - 1200 mm Weight:2 t Motor output:2,2 kW :70 mm Tol measurements:2500 x 1800 mm

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 3,000 kg, Fork carriage ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Very good Description: Mast type Triplex EFG 425-430 Carriage class 3A (51 cm) Width 1120 mm Inside dimension 415 mm Outside dimension 475 mm Height 635 mm ID OS975 Kdodpjt S Rv Djfx Addsg

Condition: used, Year of construction: 1998, functionality: fully functional, Used, complete, fully functional block wagon ARTIGLIO CI700 with 6 hydraulic clamps including drive unit. The wagon can be inspected at any time by prior appointment. Kodexbpc Ijpfx Addjdg

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 4,500 kg, empty load weight: 92 kg, construction width: 1,400 mm, Fork carriage Load center of gravity: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Ksdpfx Aeu D S Iyeddjdg Technical condition: very good Description: Quick-change frame with fork carriage plate 1400mm/ FEM3

Condition: used, functionality: fully functional, roll diameter: 80 mm, roll width: 500 mm, total length: 550,000 mm, construction width: 530 mm, construction height: 280 mm, roll spacing: 200 mm, segment length: 2,000 mm, Used, well-maintained roller conveyor system from a furniture factory / wood-based panel processing: Approx. 550 running meters of roller conveyors - Roller conveyor constructed from steel with steel rollers - Conveyor width approx. 530 mm, roller width approx. 500 mm - Roller diameter approx. 80 mm, roller pitch approx. 200 mm - Conveyor height / top of rollers approx. 280–290 mm - Frame construction: steel, painted green - Support stands can be flexibly used as connection or end pieces - Unit lengths in various sizes: some 1000 mm, some 1500 mm, mostly 2000 mm, some 3000 mm - Approx. 73 locking devices mounted on the roller conveyors - Additionally, approx. 80 support stands loose - Additionally, approx. 140 rollers loose Kdjdpfx Adoxwyxrjdsg - Manufacturer: Wemhöner W90 - Year of construction from 1972, first owner 9 transverse transfer carts with floor rails - Transverse transfer carts suitable for the above roller conveyors - For transferring material between the roller conveyor lines - Cart length approx. 3000 mm - Approx. 220 running meters of floor rails (approx. 110 m double rails), single rail lengths from approx. 1500 mm to approx. 9000 mm - Manufacturer: Wemhöner W91 - Year of construction from 1972, first owner - Sale from location Karlsruhe / southern Germany - Inspection by appointment possible - Preferably for complete lot, partial sale on request

Condition: good (used), Hydraulic clamping trolley Type VS. Track width 790 mm. Trolley height 390 mm. With auxiliary trolley HEH or HKE. Kjdpfx Asxwn Rveddjdg

Condition: new, functionality: fully functional, Year of construction: 2025, Fork carriage Condition: New device Kedexxn Abepfx Addodg Technical condition: New Description: 3-point attachment carrier for forklifts – and also suitable for trailers, NEW – fixed price 750,-- EURO excl. VAT.

Condition: ready for operation (used), Complete, fully operational sawmill for sale due to retirement. All documentation up to date, with an extensive supplier base and the entire production already sold. More information and pricing available privately. Only for genuinely interested parties. Kdedsxma Huopfx Addsg

Condition: ready for operation (used), Year of construction: 1969, functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke length: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Kodpfx Aowcn H Rsddsdg Ejector in the ram Force at 6 atm: 46 t Stroke: 150 mm

Condition: used, Chassis with friction wheel drive for DEMAG lightweight crane system, suitable for crane rails made from system profiles type KBK 2 and KBK II L. Type: DRF 200-B14-1-43, serial no.: 45950995. Travel speed: approx. 40 m/min = 0.67 m/sec. Motor power: 0.37 kW. Power supply: 400 Volt, 50 Hz. Drive motor: DEMAG, type ZBA 71 A2 B007. KBK 2 / KBK2L trolley for suspension in crane track. Wheel diameter: 82 mm, wheel width: 21 mm, trolley width: 78 mm. Kdedpsw Nxyyefx Addeg Space requirement (L x W x H): 410 x 320 x 470 mm. Weight: 28 kg. In good condition.

Condition: repair required (used), PRIMULTINI 1400 headring and carriage Kdjdpfx Adjx Nf Skjdeg

Condition: new, Technical data:Length: 1,067 mmDepth: 1,015 mmHeight: 1,845 mmLength of outer tube: 650 mmClearance between tubes: 160 mmClearance between bays: 400 mmLoad capacity: 400 kg Kodpfx Ajvwfimjddedg

Condition: new, 1777x1015x1045 mm 400 kg Technical data:Length: 1,777 mmDepth: 1,015 mmHeight: 1,845 mmLength of outer tube: 650 mmClearance between tubes: 160 mmClearance between bays: 400 mmLoad capacity: approx. 400 kg Kdjdpfx Ajvwfucjddsg

Condition: used, Fully hydraulic tensioning carriage Mayrhofer with auxiliary carriage with rails Ksdpfx Adexvz E Rjdodg Track width: 90 cm Immediately available Location: Austria, near Graz

Condition: repair required (used), Sturdy Linck fully hydraulic clamping trolley type VA with hydraulic auxiliary carriage VY. Kdsdpfxjvfdp Is Addjg Track gauge 1,100 mm. The tensioning wagon set was overhauled approx. 18 years ago and not been in use since then. Also ideal for spare parts.

Condition: good (used), Sturdy block clamping carriage for horizontal fence or band saw Length approx. 9.0 m. Track width 920 mm. 6 clamping blocks. With hydraulic feed. Kdjdotqd Naepfx Addsg Also suitable for feeding drying kilns etc.

Condition: used, Complete Carriage Galileo VS including Spinner and Data-Floppies.Out of a well working Galileo. Ksdjbwg T Tjpfx Addjdg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ares K12/6 CE – Hydraulic Die Cutting Press with Right-Left Traveling Head ARES machines combine the key advantages of hydraulic and electronic technology within the domain of cutting presses. Pressing force: 40 tons (Max version) Table dimensions: 2000 mm x 750 mm Ram (hammer) dimensions: 750 mm x 750 mm Ram stroke: 10 mm – 150 mm Pump motor: 1.5 kW Ram drive motor: 0.75 kW Overall machine dimensions: 2420 mm x 1000 mm x 2150 mm (H) Weight: 2050 kg Year of manufacture: 2014 Kdsdpfx Adjxu Nzwodsg Straightforward, user-friendly operation – all functions adjustable from a clear touchscreen panel Full manufacturer documentation included Machine in excellent technical condition after comprehensive servicing Price on request

Condition: refurbished (used), - Manufacture year 2007completely overhauled Kedpfx Adotta I Ejdsdg - BONGIOANNI variable cut axis system - 5 headlocks - 4 log turners - New control unit - New feed system - New electric cabinet/control SPS - Frame and rail system - Pantograph - New drive nom. 44kW

Condition: used, functionality: fully functional, load capacity: 5,000 kg, Fork carriage ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Very good Description: ISO 3A (51 cm), capacity 5,000 kg, width 1,350 mm. To enlarge the width of the original fork carriage, can also be supplied to increase the lost load centre and as an adapter fork carriage between the forklift truck and other attachments. ID OS1670 Kdsdew Erlcjpfx Addjg

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Kodpfjw Eglqox Addedg Condition: Ready for use and fully functional Technical condition: good Description: LINDE 1120 TRIPLEX with sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Kdodpfx Adew Dwt Nsdog Technical condition: good Description: LINDE 1120 TRIPLEX sideshift. Dimensions: Inside 225 mm, Outside 285 mm, Length 680 mm

Condition: used, functionality: fully functional, load capacity: 2,000 kg, Fork carriage Condition: Ready for use and fully functional Technical condition: good Kdedpjw Dwugofx Addjg Description: LINDE 1120 TRIPLEX with sideshift Dimensions: Inside 225 mm Outside 285 mm Length 680 mm