Used Cross Conveyors Feeders for sale (15,735)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Tjdpjzp H R Ejfx Al Aoc Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Year of construction: 2026, condition: like new (used), various vibratory conveyors / vibratory feeders Tsdpozzdvvjfx Al Ajc

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Tedpfx Aerg Nzqol Aec Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 Tsdorg Nzxepfx Al Aoc RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Robust cross-conveyor for round timber For sale is an extremely robust cross-conveyor for logs, taken from a professional sawmill operation. Features: Heavy-duty industrial design Double chain conveyor Short conveying distance Fast and reliable transport of round timber to the log carriage Solid and durable steel construction Immediately available The system is in good, functional condition and can be inspected under power by appointment. Todozq T Adspfx Al Asc Please submit a fair and realistic offer.

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor Tsdpfetrhm Aex Al Aec -Manufacturer: Grenzebach, conveyor belt 2 levels type EZT with guide rollers -Speed: frequency controlled -Drive: 2x SEW Eurodrive -Conveyor belt length: 1400 mm -Belt spacing: 410 mm -Cross carriage: roller spacing 1000 mm -Number: 2x conveyor belt available -Price per piece -Dimensions: 1450/1550/H920 mm -Weight: 358 kg/pc.

Condition: used, Year of construction: 2016, Transnorm roller conveyor ejector GF 4510-1120-1000 RA1854 Make: Transnorm Roller width (RB): 1030 mm, Steel rolls Nominal/outer width (NB): 1050 mm Rolls diameter: 50 mm length: 3715mm Overall height frame: 250 ejector angle: 30° in both sides 7 rows ejector individually controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: with supports (please enquire if required) Todpfx Alek Abhhj Aoc Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, functionality: fully functional, Well-maintained, inclined cross conveyor from Esterer, originating from a small sawmill. Drive via geared motor. 6 chain strands. Spacing: 2300 mm - 1500 mm - 1200 mm - 1000 mm - 1200 mm. Tsdpozw Epcsfx Al Aoc Conveyor length approx. 3000 mm. Chain pitch 80 mm.

Condition: good (used), functionality: fully functional, Sturdy, mobile roundwood and timber cross conveyor. Equipped with 5 chain strands. Electric drive for mobility. Tedpfjzum Uuox Al Aec Track width 1.60 m.

Condition: used, Board cross conveyor Length: 8m Electric motor: 1.5 kW Tsdpeza Dvzofx Al Aoc

Condition: used, Multisaw cross feeder Tedsnwnpqopfx Al Aec

Year of construction: 2019, condition: like new (used), Board cross conveyor for sale. Six controls. Distance between controls 0.85 m. Width 4, 40m. Length 2.80 m. Drive, motor reducer 1.5 kw. In full working order, after repair. Tjdpfxenl Dvls Al Aec

Condition: used, Year of construction: 2014, Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Tjdpjrg Nzujfx Al Aoc For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Cross Conveyor: - total length: 7000 mm - total width: 2300 mm - feed motor power: 0.75 kW Tjdpexu E E Esfx Al Ajc - trimming saw for material - saw motor power: 2.2 kW - max. saw blade diameter: 350 mm - cutting height: 80 mm

Year of construction: 2001, condition: good (used), functionality: fully functional, Pinomatic cross conveyor for a planing and sawing line Year of manufacture: 2001 Manufacturer: Pinomatic OY Tsdpov S Hfxefx Al Asc Type: POS 9+10 S/N: P1033 Motor-driven cross conveyor with 7 chain hoists Arm length: 6000mm Cross conveyor width: up to 4000mm (adjustable) Height: 900mm 6 fixed chain hoists 1 adjustable chain hoist Voltage: 230/400VAC

Condition: used, Length: 315 cm Belt width: 150 cm Distance between scrapers: 31 cm Tedpfxjzdux To Al Asc Scraper height: 5 cm Drive roller diameter: 11 cm Side rail height: 11 cm Overall height: 24 cm Belt for food processing Stainless steel Manufacturer: Haith Please see my other listings.

Condition: excellent (used), CATALOGUE NUMBER 7899 Technical data: - inlet cross-section of the chipper: 410mm x 180mm - shaft width: 430mm - shaft diameter: 400mm - number of knives: 2 pcs - screen size: 60x60mm - top: driving shaft, toothed - bottom: 2 driving shafts, toothed - length of the infeed conveyor: 2180mm - width of the infeed conveyor: 400mm - auto-reverse (adjustable) - main motor: 30kW - feed motor: 2 x 2.2kW - machine dimensions (L/W/H): 4300x1600x1100mm - weight: approximately 2000kg ADVANTAGES: - Polish production - Auto-reverse (adjustable) - With infeed conveyor - DTR documentation Tedpozu R Urjfx Al Ajc - Used chipper, very good condition Net price: 69900 PLN Net price: 16256 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Year of construction: 2023, condition: new, Heavy-duty log cross conveyor 4-strand Tedpfx Asdzx I Rel Aec Length approx. 9 m Strand spacing: 1500 mm, 1800 mm, 2300 mm Height: 1500 mm

Condition: like new (used), Machine ready for operation, equipped with a drip tray conveyor with a perforated belt. Can be used as an inspection conveyor, made of acid-resistant stainless steel Inox. Tsdjytm Ndspfx Al Aoc

Condition: used, Tape dimensions: Length: 1600 mm Width: 1200 mm Drum diameter: 115 mm Tjdpfx Aszdrbxjl Aoc External dimensions: Width: 1900 mm Length: 2750 mm Height: 580 mm Feeder displacement using a pneumatic actuator over a distance of approximately 1000 mm. The stated price applies to one unit. Please see my other listings.

Year of construction: 2010, condition: used, Length: 406 cm Width: 60 cm Working width: 56 cm Sideboard height: 8 cm Overall height: 21 cm Roller diameter: 11.5 cm Power: 0.65 kW Food-grade conveyor belt Stainless steel Manufacturer: Haith The stated price is for one unit. Tedpozdnm Dsfx Al Ajc Please see my other listings.

Condition: excellent (used), Year of construction: 2000, An inclined conveyor with steel hinge plates. Last loaded with a wheel loader and a dump truck. Overall length: 9.6 m Size of the feed hopper: 8.0 x 3.6 m Width of the conveyor at the bottom: 1.85 m Maximum width with drive: 3.2 m Width of the conveyor belt: 1.3 m Overall height: 5.3 m Tedpfsiwxmbjx Al Aoc Belt speed: 0.05 - 0.29 m/min Conveyor chain: FV 315 with bushing and idler roller Throughput: 3 to 14 m³/hour Gear motor, belt, SEW: 0.75 kW Speed: 0.2 rpm Torque: 18000 Nm Speed of the winding shaft: 64 rpm Gear motor, winding drum, Flender: 7.5 kW Total weight: approx. 20 tons A cover belt conveyor / steep conveyor is also available.

Condition: used, For sale: a 3-meter conveyor belt, ready for operation. ✅ Length: 3 m ✅ Belt width: 0.5 m Tjdpfxoyy Uiae Al Asc ✅ Transportation can be arranged ✅ Large selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt to meet your needs.

Year of construction: 1994, condition: used, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1740 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm Todpfx Aeya H Hiol Asc - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: used, Year of construction: 2018, We offer used PROMAG 106617-PW-5.00 roller conveyors, automatic roller conveyors, manufactured in 2018. The price is per meter; we currently have 5-meter sections available (a large quantity of 2000 meters). Type: 106617-PW-5.00 Year of manufacture: 2018 Tsdpfx Ajzbrbbol Ajc Product number: 106617/46/2 Power: 0.48 kW Power supply: 230/400 V Frequency: 50 Hz Protection class: 54 Load capacity: 320 kg Weight: 244 kg Dimensions and parameters: - Overall width: 490 mm - Working width: 370 mm - Roller diameter: 80 mm If you have any questions or require additional information, please send a message or contact us by phone.