Used Castowig 200 Gw for sale (42,639)

Condition: good (used), Kraftspannfutter Gujdpfx Agjcr S Eus Noh 200 mm Durchmesser

Condition: good (used), Included in delivery: 01x holder f. slide-through protection, used material color: sendzimir galvanized Manufacturer: SLP leg A: approx. 200 x 140 mm leg B: approx. 200 x 38 mm opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Godpjipuggjfx Ag Neuh Weight/pc.: 0.930 kg

Year of construction: 2000, condition: used, Punching machine Noble HM 35/350 BKE 200/5 Gedeg Dgyxepfx Ag Njuh Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Condition: excellent (used), CATALOGUE NUMBER 6911 TECHNICAL DATA - track width 350mm - shaft width 370mm - max cutting height 200mm - max disc diameter: Gusdpfx Agekyr H Ao Njh - on the upper shaft 340mm - on the lower shaft 300mm - disc hole diameter 80mm from above: - deflectors - 2 sliding pressing shafts - pressure - shaft with 37kW saws - 2 smooth sliding shafts from below: - feeder table + guide strip - deflectors - track - shaft with 37kW saws - track - 1 sliding, smooth, output shaft - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up/down 1.1kW - automatic central lubrication - electrically adjustable smooth regulation of feed speed 3kW - diameter of exhaust port 230mm, 250mm - dimensions length/width/height 3000x2300x1900mm - weight about 5000kg ADVANTAGES - Italian production - two-shaft - used multi-saw, very good condition Net price: 178900PLN Net price: 42000 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: like new (used), Siemens BT 200 Physical Bus Test Device 6SE7181-0AA01-0AA0 Simatic Physical Bus Test Device Profibus-DP Bus Test Unit Manufacturer: Siemens BT 200 Physical Bus Test Device Type: Siemens BT 200 New in original packaging - but offered as used. For further technical data, please refer to the type plate in the attached photos. Otherwise, please note the following information, call if necessary. Thank you very much. - Condition: please see photos, the item was stocked as a spare part, comes from the spare parts warehouse or was dismantled from an existing system. - Further information: Please note that the item may have already been used. Some scratches, stains, discolorations or cable harnesses may therefore still be present. - The item is offered as used, without any guarantee or warranty. - Some of our items have been dismantled from functioning production systems or are unused stock items, Gsdpfx Aevai Hbog Nsuh - Items have been in storage for several years and are expressly offered as "used goods", even if they have hardly been used or have only been kept in stock as spare parts. - Deviations from technical data and errors in the description of the item may occur and are reserved. - Condition/packaging as shown in the photos or according to individual agreement. - For further questions or request for more photos please contact us. - For shipping abroad, please inquire, as shipping costs vary. - For technical or other queries please contact us at any time. - Appointments for viewing or collection are of course possible by arrangement. Please contact us if you have any questions or would like to arrange a viewing. Thank you for your interest.

Condition: good (used), Morgana DigiBook 200 PUR Perfect Binder 100% functional, ready to use. Manufactured by Morgana, Italy. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine includes a dust extraction system. Technical specifications: Maximum size: 380 x 325 mm Guodpfjxk U N Sex Ag Nsh Min. size: 110 x 110 mm Glued block thickness: 2 – 50 mm Production rate: approx. 200 books/h Weight: 250 kg 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Smooth adjustment of glue thickness Includes user manual.

Condition: excellent (used), 4 stair clamps clamping height 150-200 mm Gujdpfxolnka Io Ag Noh (28365) T Groove width 12 mm Thread M 10

Year of construction: 2020, condition: new, We offer here a new shelf connector of the manufacturer Nedcon NS for sale. Guedpfx Agjf S Iq Te Njh Included in delivery are: 01x SET Spacer NR new length: 200 mm Material colour: sendzimir galvanized consisting of each: 01x spacer NR L=200, sendzimir galvanized 02x hexagon head screw 8.8 M10x25 galvanized 02x Toothed nut, hexagonal 8.8 M10 flange galvanised 04x hexagon head screw, M10 galvanized

Year of construction: 2011, condition: good (used), Drying oven, tempering oven Caltherm 200 C For sale in excellent condition, CALTHERM manufactured air-mixed multi-purpose Convection oven heat treatment oven electrically heated oven with one chamber, with air mixing Gjdpfxevu Hvps Ag Neuh manufacturer: Caltherm J7172 year of manufacture: 2011 internal dimensions: width: 300cm height: 200cm length: 185cm over design temperature:200 °C Test Temperature: 200 °C Time to get to set point: 45 min number of elements: 12x 3,6kw fan motor: 15kw Total recommended Power supply of plant : 100A Type of temperature control: West 6400 external dimensions: width: 430cm length: 330cm height: 300cm weight: ca 4800kg

Condition: refurbished (used), Year of construction: 2014, Durst P10-200 Sign / Corrugated with full automatic feeder and stacker Color: 6C + W (optional), 10 pl-1000 dpi Max print speed: 205 m2/h Corrugated option includes: - Corrugated software - Skids and hardware for corrugated boards - Roll option: 2.05m - Fully automatic feeder and stacker For operator-free printing (also overnight) Gsdpow U Elyefx Ag Neuh Status: Printer is currently being refurbished

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Guodpfsud R T Ssx Ag Njh

Condition: excellent (used), Year of construction: 2025, overall weight: 6,200 kg, New Kaeser compressor 200 KW 8 BAR with frequency inverter. 24 months warranty. Available immediately. Gujdewiwg Tspfx Ag Njh

Condition: excellent (used), Stair Tensioner (28366) Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Gsdpoln Ulajfx Ag Njuh Weight 8,5 kg

Condition: good (used), The scope of delivery includes: Godpfoi Hph Sex Ag Nouh 01x shelf connector, used Material color: orange Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 100 mm for shelf distance: approx. 200 mm dim. head plates: 128 x 90 mm profile dim.: C 46 x 23 mm Weight: approx. 1,200 kg | pcs. General information about the article: This article is offered for pick-up only. Any additional transport or shipment of this article is associated with additional costs, which can be requested separately from us. depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), CATALOGUE NUMBER 7615 Technical data: - inlet width 550mm - inlet height 200mm - shaft width 570mm - knife length 570mm - number of knives 2pcs - sieve dimensions 60x120mm - toothed pulling shaft, divided from the bottom - lower shaft motor 2.5kW - toothed pulling shaft from the top - upper shaft motor 2.5kW - vibrating chute 2.2kW - vibrating chute length 3200mm - vibrating chute width 490mm - main motor 45kW - auto reverse - reverse gear - exhaust port diameter 250mm - overall machine dimensions length/width/height 2100x2000x1100mm - total dimensions of the vibrating chute length/width/height 3200x700x600mm - weight about 3500kg ADVANTAGES - wide inlet opening - auto reverse (adjustable) - reverse gear - used chipper, very good condition Net price: PLN 119,900 Net price: EUR 28,100 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) Gusdpfx Agjwa Al Nj Neh

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Gjdjwc Rk Eopfx Ag Neuh Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: excellent (used), Year of construction: 2004, MAZAK INTEGREX 200-III ST 5 Axis Turning Centers Lathe, s/n 174623, w/ MAZATROL 640MT Pro Control, 40” Center Distance, 2.5” Bar Capacity, 26” Swing, 26” Turning Diameter, Travels: X-22.83”, Y-6.3”, Z-41.14”, B Axis Head Tilt: 225°, C Axis Index: 0.001°, 5,000 RPM Spindle Speed (Main/Sub), Live Tooling, 12,000 RPM Live Tooling Spindle Speed, 40-ATC, KM63 Taper, Sub Spindle, Oil Matic Oil Temp Regulator, Chip Conveyor Gujdpfx Agou A Dgls Neh

Year of construction: 2015, condition: good (used), Used modern Bystronic Xpert 200/3100 200ton x 3metre cnc pressbrake for sale Year/new: 2015 Working length: 3100mm / 3metre x 200ton Press force: 2000KN / 200ton Max stroke 215mm Total axis: 7axis – y1,y2,x,x1,r,z1,z2 Hydraulic crowning Hydraulic tool clamping Fully serviced by Bystronic Uk from new One owner from new Low hours in good working condition Gjdpfx Aogkgwfog Nsuh

Year of construction: 1996, condition: used, functionality: fully functional, machine/vehicle number: 80796, Machine is in a perfect condition, fully operational, needs to be dismantled on site in Vilnius, Lithuania. Seller offers dismantling, loading on the truck as well as delivery. Gjdpfx Aovddpleg Nsuh

Condition: good (used), The scope of delivery includes: Gjdjk Iuhfopfx Ag Neuh 01x shelf connector, used Material color: blue Manufacturer: Feralco for shelf distance: approx. 200 mm total length: approx. 200 mm profile dim.: approx. 20 x 20 mm head plate: approx. 100 x 40 x 4 mm Drill hole Ø: approx. 9 mm (2 pcs. per side) Weight: approx. 0,41 kg | pcs.

Condition: like new (used), As new Tote Bins Capacity 200 Ltr Gujdpfou Ti Slex Ag Noh Mobile on 4 nylon wheels Some complete with lids Qty 10 available

Condition: excellent (used), Professional face mill from the renowned brand GARANT (Hoffmann Group), designed for high-performance machining. Overall diameter: 210 mm Mounting bore: 60 mm Equipped with indexable inserts – easy handling, suitable for heavy-duty industrial conditions. In very good condition, the tool is ready for use. An ideal choice for machining centers and industrial milling machines. Gjdjw Sav Ujpfx Ag Njuh

Condition: good (used), Technical data for the shelf connector: Shelf system: SLP The scope of delivery includes: 01x shelf connector, used Material color: blue Total length: approx. 200 mm head plates: approx. 95 x 41 mm L-profile: approx. 31 x 31 mm Gujdpfjipugrox Ag Nsh

Condition: excellent (used), For sale: robust mounting plate/machine table with T-slots. Constructed from thick-walled steel, painted blue. Excellent base for installing large components, fixtures, or for measuring and machining applications. • Dimensions: 2570 x 770 x 200 mm • Surface with T-slots • Precisely machined top section Gsdpfew Rdtuex Ag Neuh • Weight: 900 kg • Can be transported or loaded by forklift

Condition: good (used), The scope of delivery includes: 01x U- collision protection corner, used Material color: orange total height: approx. 350 mm total width: approx. 200 mm Godpfxjk T Au Ee Ag Nsuh inside width: approx. 160 mm total depth: approx. 360 mm inside depth: approx. 240 mm leg dimension: approx. 140 x 140 mm foot plate dimension: approx. 340 x 200 x 8 mm material thickness: approx. 6,00 mm Drill hole Ø: approx. 16 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 14,850 Kg General information about the article: This article is offered for pickup only. Any further transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.