Used Central Heating Boilers for sale (22,262)

Condition: new, Year of construction: 2024, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Ibsdpjqvlvmefx Ag Njc Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low-noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Max. operating overpressure: 13 bar Ibsdpfx Aew I T Ivjg Nec Water content approx.: 43 l Year of manufacture: 1996 Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Year of construction: 2020, condition: new, Designed for plug in complete system on a mobile stainless steel base plate incl. juice pump, with 63KW Wolf Oil boiler, 2 heatexchanger, heat-holding section for approx. 20-30 second and automatic control. Components: Ibjdpfx Agscx R Ddj Noc Heating circuit, heating pump and expansion tank, 2 heatexchanger for juice preheating / recooling and heation uo to 80°C. 24 m heat-holding section, automatic pneumatic temperature control. Capacity 3000 l juice per hour (depending on juice temperature).

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 006777, power: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), nominal heat output: 500 kW (679.81 HP), Equipment: documentation/manual, hot water, For sale: complete 500 kW furnace with dosing system Isdpfx Aoxmwm Ejg Nebc

Condition: used, 975 kW. in well-maintained condition Ibsdpew Umafjfx Ag Nec

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, We are offering a boiler from the renowned company URBAS. The boiler has a heating capacity of 1.5 MW. The boiler is powered by biomass, bark, wood chips, and sawdust. Built in 2000. Complete pump and valve unit. Boiler have VERTICAL HEATINGCHANGER, what make easier all cleaning work, asch fall down thru gravitation and stoppt nicht pipes Iedpjxl Elasfx Ag Njbc The boiler is in operation until March/April 2026. It is possible to view the boiler in operation. The boiler is in excellent condition.

Condition: used, Year of construction: 2008, Bioflamm SR-EB9 wood chip boiler, moving grate furnace, year of manufacture 2008, a new heat exchanger was installed in 2018, output 830 kW, hot water system max. temperature 120°C, incl. feed auger with backfire protection, incl. fuel chain conveyor, incl. 2 pcs push floor containers of 30m³ each, incl. automatic ash removal, incl. hydraulic unit, incl. control system, dismantling must be carried out by the buyer. Ibsdpfx Aovytfuog Njc

Condition: new, Year of construction: 2023, overall weight: 3,500 kg, total length: 6,000 mm, total width: 1,200 mm, total height: 2,300 mm, motor manufacturer: Bitzer, Advansor Cubig II 2 Ijdpew R U Nmofx Ag Nobc Completely new CO2 R744 machine frame incl. 2 x condenser gas coolers

Year of construction: 2015, condition: new, Beer short-time-heating steamheated capacity 2000 l/h preheating, backcooling and icewaterplateheatexchanger Ijdpfxocltpye Ag Njbc

Condition: used, Heraeus / Thermo Type: UT 6200 Heraeus / Thermo heating and drying oven Process control up to 300°C External housing: Depth 715 mm, Width 895 mm, Height 816 mm Internal dimensions: Depth 503 mm, Width 554 mm, Height 644 mm External diameter: Inlet/outlet connection 40 D Internal volume: 180 liters Steam chamber: 240 liters 1/PE AC, 230 Volt, 50 Hz, 12.0 A, 2.65 kW Weight: 100 kg Type: UT 6200 Condition: used Scope of delivery: (see picture) (Subject to change and errors in the technical data!) If you have further questions, we are happy to answer them by phone. Ibedow Euwzspfx Ag Nsc

Condition: used, Year of construction: 2006, functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, pressure: 6 bar, nominal heat output: 1,400 kW (1,903.47 HP), temperature: 105 °C, tank capacity: 2,040 l, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, Viessmann VITOPLEX SX1 1400kw hot water boiler with WEISHAUPT G30/2A gas burner. Manufacturer: Viessmann VITOPLEX SX1 Year of construction: 2006 Nominal heat output: 1400 kW Boiler water content: 2040 liters Max. water pressure in the heating circuit: 6 bar Efficiency: 94% Maximum water temperature in the heating circuit: 105°C Nominal voltage: 230V 50Hz 6A Boiler control: Vitotronic 100 Fireplace pipe diameter: 300 mm Dimensions: Length: 2540 mm Width: 1380-1840 mm Isdpfxeudllvs Ag Njbc Height: 1900 mm Weight: approx. 2500 kg Gas burner: Weishaupt G30/2A complete assembly. Version: ZM-LN Year of construction: 2007 Heat output: min. 300 - max. 1800 kW Connection pressure: min. 15- max. 500 Mbar Gas type: natural gas Gas control valve: DUNGS DMV-D 5065/11 Pressure switch: Dungs LGW 50 A2P Siemens SQM10.16532 Stellar Drive Leakage tester Dungs VPS-504 S04 with stuffing box Leak tester Dungs VPS-504 S04 Electric power: 6 kW Control voltage: 230 V 50 Hz 1 Phase Mains voltage: 400 V, 50 Hz, 3 Phase

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: CU 600.6, The expansion vessel is in very good condition. Sale only due to the refurbishment of our heating system! Ibodpfx Agewv T Nwo Nec

Condition: good (used), Year of construction: 2008, power: 700 kW (951.73 HP), heating capacity: 700 kW (951.73 HP), nominal heat output: 700 kW (951.73 HP), Mawera type FU700RIA, fully automatic wood chip heating system with underfeed combustion. Output: 700 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2008. Components: boiler body, combustion chamber and heat exchanger, screw conveyor, ash removal screw, ash separator, multicyclone, flue pipes for chimney connection, flue gas fan, operating manual, machine book, control system, control cabinet, chimney. Discharge: HSS only available upon separate request. Inspection on site in France possible. Good condition. Iodpfxsxbualo Ag Nobc

Condition: excellent (used), Year of construction: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Isdpfx Aotrl Sksg Nsbc

Condition: ready for operation (used), Year of construction: 2000, Recirculating air thermal cabinet / warming oven / drying cabinet / drying oven Alltherm WS 3750 - 1.5 - E - 24l The heated cabinet is equipped with two separately controllable chambers. Maximum temperature per chamber: 250 degrees Celsius Approximate dimensions: Left chamber: Height 167 cm x Width 131 cm x Depth 91 cm Right chamber: Height 167 cm x Width 145 cm x Depth 96 cm Approx. external dimensions of the entire oven: Length 380 cm x Height 250 cm x Depth 128 cm Ibsdewuqvrjpfx Ag Njc The left chamber is additionally fitted with a viewing window. Location: Siegen ____ Our general terms and conditions apply. The seller assumes no liability for typographical or data transmission errors. The information and images were provided by the owner and released for publication. The appearance of the items on offer corresponds to their age and the photos shown. The technology and wear and tear of the items offered are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Nabertherm Nabertherm N 2260/S Chamber Furnace with Wire Heating up to 1300 °C Technical Specifications – Nabertherm N 2260/S Feature / Value Model: Nabertherm N 2260/S Maximum Temperature: 1300 °C Voltage / Connection: 400 V, 3~ (three-phase current), PE (protective earth) Heating Power: 75 kW Heating Zones: 5-sided (sides, floor, door, optionally ceiling) Internal Dimensions (Firing Chamber) Dimension / Value Width: 1,500 mm Depth: 1,000 mm Height: 1,720 mm Volume: approx. 2,580 liters Ibedpfx Asw Ec Egog Njc External Dimensions (Complete Unit) Dimension / Value Length: 2,000 mm Width: 2,250 mm Height: 2,850 mm Weight: approx. 3,100 kg Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 production year: 2020-22 heat output: 23kw gas burner + exhaust fan pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Iodjq Hu Afjpfx Ag Nsbc Connection voltage: IP21 AC 230V 50Hz

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Ibedpfjicic Hox Ag Nec Very good condition

Condition: good (used), Year of construction: 2005, functionality: fully functional, power: 700 kW (951.73 HP), heating capacity: 700 kW (951.73 HP), nominal heat output: 700 kW (951.73 HP), Mawera Type FU700RIA, fully automatic wood chip heating system with underfeed combustion. Output: 700 kW. Hot water system, maximum flow temperature: 110°C. Year of manufacture: 2005. Components: boiler body, combustion chamber and heat exchanger, screw conveyor, ash removal screw, ash separator, multicyclone, flue pipes for chimney connection, flue gas fan, operating manual, machinery book, control system, switch cabinet, 5000 l buffer tank, all pumps on the heating side, with hydraulic SSt discharge with 2 push rods. Can be inspected on site in France. Good condition. Iedpoxbt U Uefx Ag Njbc

Condition: good (used), 2 kW high-frequency inverter Ibedpov N Nygofx Ag Njc for soldering or joining

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, Equipment: documentation/manual, Hydraulic press for versatile use as an assembly press, small series press, manual insertion press or heating press in double column press design (H-press) The press can be inspected at the Ennepetal warehouse. It is a 2.5 year old, unused press without operating hours, which is sold with full warranty. List price: 45.000 € for a special price of 28.000 € Technical details: Robust machine frame Capacity: 30 tons - at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW - 15 hp Oil tank: 600 × 450 × 500 mm - with approx. 100 liters Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Forward speed: 45 mm/s Return speed: 55 mm/s Guides: Ø 50 mm Table top: 800 × 550 mm - with T-slots Plunger plate: 700 × 500 mm - with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Table size of the press table 700 × 500 × 70 mm Table height 800 mm, from hall floor Cylinder dimensions / piston rod 110 / 75 mm Plunger size 700 × 500 × 80 mm Emergency switch Rear protective cladding made of painted mesh Lighting in the press area Closed at the rear and sides 500 mm high light curtain with 14 mm resolution (finger protection) Maximum distance between table top and ram 500 mm Cylinder travel 500 mm Front open width 820 mm Press pressure adjustable from 5 to 30 T via rotary control Travel speed downwards 50 mm, upwards 40 mm per second Total weight approx. 2000 kg Paintwork in RAL (light gray) 7035 and RAL 2009 (orange) Iodpou U Ey Iefx Ag Njbc Assembly, commissioning, instruction for a separate charge CE declaration and documentation in German Plunger plate with two guide columns Resettable piece counter Position limitation via cam switch Adjustable two-hand control with 3 m supply cable Safety test with certificate from an authorized company There are movable sensors on the right-hand side to limit the travel distance. These can be used to set a specific travel distance, for example 300 mm. The press then automatically moves up to the preset point at the touch of a button. The ram plate is guided by 2 guide columns. The rear of the press is closed, but equipped with air outlet openings. There is an ejection chute in the table. Light barrier with under-grip protection. Mountable overgrip protection. Optional: 2 heating plates, 500 × 500 mm heating surface, total size 550 × 550 mm, with controller, up to 200 degrees, incl. insulating plate, 20 mm thick, with timer Optional: Commissioning and training Delivery time Currently a delivery time of approx. 2 weeks is to be expected (without heating plates) Heating plate delivery time approx. 4 weeks. Customer service: From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Internal volume: 180 liters temperature controller and timer air mixing Ijdpfovzqyfjx Ag Nebc voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Ibjdpfx Ajmquwqog Nsc Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Condition: used, Universal Temperature Control Unit WEINREICH Type WTD 4 Temperature control unit with electric heating and connections for external cooling Serial No.: 11932217 Year of manufacture: 1993 Maximum temperature: 140°C Maximum operating overpressure: 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Iedpfxeg Rhx Uo Ag Nsbc Pump motor power: 0.37 kW Circulating water supply + return: G 3/8" Cooling water supply + return: G 3/8" Total power consumption: 4.4 kW Power supply: 380 Volt, 50 Hz, CEE plug - Tempering medium: water - Temperature control with actual and setpoint display STÖRK-TRONIC Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is supplied to the temperature control unit) - Mobile on 4 castors Dimensions (L x W x H): 620 x 260 x 670 mm Weight: 55 kg In good condition

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet Ibedpodz Spwsfx Ag Njc - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.