Used Chain Mortiser for sale (2,490)

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee Nwodpfeyuty Sex Anfof

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Cross travel: 0 - 150 mm Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Nwjdpjyxx A Isfx Anfef Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1938, used, in good condition, low operating hours including various chain sets Nedpfx Aoythcfsnfswf Manufacturer: Haffner Model: KF20 Year of manufacture: 1978 Machine no.: 20378 Column machine + chassis Chain set 12-17 / 50 x 175 J3 Door support Required space approx. 750 x 800 x 2000 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty

Condition: good (used), Chain mortiser, chain cutter, lock case cutter, lock case mortiser -Manufacturer: Festo, chain mortiser type PP on transport frame -Motor power: 1.6 kW -Connection: 380 volts -Accessories: incl. see photo -Total dimensions: 800/700/H1600 mm Nwedpeh Nvy Njfx Anfsf -Weight: 232 kg

Condition: used, 1.5kw motor 380V +- 300KG Njdpfx Aewtdwmsnfswf Heavy cast iron machine

Condition: reconditioned (used), Year of construction: 2005, MACHINING CAPABILITIES: - Mortise 30x30 mm, Max depth 150 mm - Vertical travel (Z axis) max 300 mm Adjustable via stops - Transversal adjustment (Y axis) max 300 mm (290 mm with fence) Front and handwheel adjustment - Longitudinal adjustment (X axis) max 300 mm Manual with pneumatic clamping MACHINE CONFIGURATION: - Welded steel frame - 2m support table, 40cm support rollers Fence stop guide 2000 x h.110 mm 2 pneumatic workpiece clamps Working height 1m (adjustable) - Automatic lubrication unit per cycle OTHER CHARACTERISTICS: - Power supply 400V, 50Hz, Three-phase N+T, IN 16A - Installed power 3 kW - Dust extraction: 1 top port Ø95mm ext. for Ø100mm hose - Required pneumatic supply 7 bar Nwjdpfx Aox Rz Dxsnfjf - CE marking, lockable main switch - Overall dimensions (LxWxH): 2.10x1.10xh.2.20m - Weight 350kg

Condition: used, Year of construction: 1990, Engine power: 2 hp Nodpfex Edl Ssx Anfswf

Condition: good (used), Type KF-30 Nwedpfx Aodrq Svonfjf In good condition Manual Motor 1,7 kW Tiltable Chain width 18 mm Made in Denmark Transport dimensions 700х700х1800 mm

Condition: good (used), Motor power: 2,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Nwodpfxjdrq Sas Anfof Chain width: 20 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block. Nodjwd Tgfspfx Anfjwf

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Nwodstp S E Eopfx Anfsf Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: used, Length: 7 m, external width 1030 mm, height 530 mm, 4 chain paths. Njdpfx Anov Eagvsfewf

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW Nwsdpfxsufib Rj Anfof - Chain conveyor with pushers after moulder or resaw.

Condition: used, Year of construction: 2007, Fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished. The complete movement, clamping and, mortising cycle is fully automatic. X, Y and, Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises up to 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. Njdpfeymnbnjx Anfswf Year - 2007 CE X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Anti splinter guards with air blowers and dust extraction points. Working table dimensions 1210mm x 215mm Air supply 6 bar / 470 l/min consumption. Fitted with separate dedicated programmable hollow chisel head for producing the small mortises for glazing bars

Condition: new, Year of construction: 2022, The Sedgwick 571 Hollow Chisel Morticer features a cast iron base, column, table, and slideways, which provide a rigid and durable mainframe assembly onto which to mount the cast iron chisel head and motor. The head itself is counterbalanced by a weight, giving fingertip control to the rise and fall and eliminating the breakages associated with spring type mechanisms. Its 1.1Kw industrial fan cooled motor provides ample power for continuous duties and is fitted with a fully guarded ½” capacity adjustable chuck. Unlike a collet type system the chuck holds the auger firmly round its circumference, true to the centre line of the chisel, securing longer tool life and better cutting capability. The table has longitudinal and lateral movement on a single handwheel, not only for ease of operation, but also for more precise positioning: lateral adjustment of the table being better controlled by a central screw. The angled timber clamp is adjustable on a tee slot, giving a maximum timber width of 200mm. Coupled with the height adjustable chisel head which can give a maximum timber height of 255mm underneath the chisel, the Sedgwick 571 has exceptional capability. For repetition work there are longitudinal stops along the front of the table, a marking out rail complete with turnover stop along the rear; and 2 position depth stop for haunching. The switchgear has no volt release, thermal overload protection, and a mushroom headed stop button. Specification : Ex College A1 Condition - Unused MAXIMUM CHISEL SIZE – HARDWOOD-SOFTWOOD 19mm25mm TIMBER CAPACITY 255x200mm STROKE OF CHISEL HEAD 120mm TABLE SIZE 500x160mm TABLE MOVEMENT – LONGITUDINAL-LATERAL 430mm80mm MOTOR RATING 1.1Kw DIMENSIONS – Length x Width x Height 735x630x1520mm Nwsdpfjy Efygjx Anfjf NETT WEIGHT 169 Kg

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour Nwodpoviwdmsfx Anfsf bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), mileage: 102,497 km, power: 265 kW (360.30 HP), first registration: 02/2016, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 5,020 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, number of seats: 2, total length: 8,950 mm, total width: 2,550 mm, total height: 3,450 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Short cab - Manual - PTO (Power Take-Off) - Pump - Radio/Cassette - Rear-view camera - Fabric - Central lubrication Number of axles: 4, Configuration: 8x4, Payload: 20,695 kg, Unladen weight: 14,305 kg, Gross vehicle weight: 35,000 kg, Total fuel tank capacity: 300 liters, Fifth wheel: Fixed, Number of differential locks: 2, Central lubrication, Cabin type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Rear-view camera, Lighting type: Halogen lamps, Air conditioning, Bluetooth, Flashing lights, Engine power: 265 kW (355 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 12, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, Body length: 592 cm, Pump, Central locking, Seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, TECHNICAL: 42T, PERMITTED: 35T // 8X4 Transmission Gearbox: ZF, 12-speeds, automatic Axle configuration Tire size: 315/80R22.5 Suspension: leaf suspension Axle 1: Steering; Tread depth left: 1 mm; Tread depth right: 8 mm; Brakes: disc brakes Axle 2: Steering; Tread depth left: 6 mm; Tread depth right: 7 mm; Brakes: disc brakes Axle 3: Twin mounted; Tread depth inner left: 12 mm; Tread depth outer left: 11 mm; Tread depth inner right: 11 mm; Tread depth outer right: 11 mm; Brakes: drum brakes Axle 4: Twin mounted; Tread depth inner left: 17 mm; Tread depth outer left: 17 mm; Tread depth inner right: 12 mm; Tread depth outer right: 13 mm; Brakes: drum brakes Weights Curb weight: 14,305 kg Payload: 20,695 kg GVW: 35,000 kg Functional Loading platform height: 137 cm Pump: Yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration number: 54-BKH-1 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-turnover stock • Recognizable quality • Good pricing • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged fast Nwsdpfxsy Ecmwo Anfof • Expert technical service • The security of 'recognizable quality' • And much more.... Please visit our website for special offers and full stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: excellent (used), GSP M 743 mortising machine Stroke (mm): X450 Y500 Slide travel (mm): 300 Nsdpfoulfuzjx Anfewf Max. table tool distance (mm): 450 Gooseneck (mm) : 590 Slot width 25 30 mn Table diameter (mm): 700 Feed speed (mm/mm): 0.1-2.5mm/Cp Main motor power (HP): 6 Machine equipped with : Automatic feeds/Slide tilting Dimensions WxDxH (mm) : 2300x1700x2600 Machine weight (T) : 3.5 Overall dimensions 2500x 2200 height 2400

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10 m -Pitch: 200 mm Nsdod Tih Rjpfx Anfswf -Intermediate dimension: 48 mm -Dimensions 1200/1000/100 mm -Weight: 176.5 kg

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 9600 mm Nsdpfxed Tih Tj Anfewf -Pitch: 200 mm -Intermediate dimension: 48 mm -Dimensions: 1140/920/100 mm -Weight: 166.5 kg

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain -Chain length: 10.4 m -Pitch: 200 mm -Intermediate dimension: 48 mm Nwsdpfx Ajd Tih Nenfof -Price: per piece -Number: 2 pieces -Dimensions: 1140/960/100 mm -Weight: 180 kg/piece

Condition: excellent (used), functionality: fully functional, power: 112 kW (152.28 HP), overall weight: 22,200 kg, Year of construction: 2006, operating hours: 8,318 h, Equipment: cabin, hydraulics, quick-change device, NEW Holland Kobelco E 215/SW 10-3/Hydraulic • Manufacturer: NEW HOLLAND Kobelco • Model: E 215 • Year of manufacture: 2006 • Engine power: 112 kW/152 HP • Engine type: CNH F4BE0684M*D600 • Lehnhoff quick coupler • Hammer/grapple/shear hydraulic piping • Windscreen wiper • High-low speed gear • Radio • Operating hours: 8,318 h • Total weight: 22,200 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Interim sale reserved, - Errors and/or typographical mistakes excepted. - Sale according to our Terms and Conditions. Nsdsy E Nixopfx Anfewf

Condition: excellent (used), mileage: 331,009 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, axle configuration: 10x4, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,450 mm, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, Year of construction: 2010, = Additional options and accessories = - PTO Nedpfxjuxy U Rj Anfewf = Further information = Technical information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Transmission: ALLISON, automatic Axle configuration Front axle 1: Max axle load: 10,000 kg; Steered Front axle 2: Max axle load: 10,000 kg; Steered Front axle 3: Lift axle; Max axle load: 10,000 kg; Steered Rear axle 1: Twin tires; Max axle load: 9,500 kg Rear axle 2: Twin tires; Max axle load: 9,500 kg Weights Unladen weight: 17,870 kg Payload: 35,130 kg Gross vehicle weight: 53,000 kg Condition Technical condition: very good Optical condition: very good Identification Registration number: BX-NZ-59 TERBERG FM2850 10X4 WITH 40 TON CHAIN SYSTEM EURO 5 L PACKAGE 400 HP DRIVE: 10X4 3x STEERED AXLES 1x LIFT AXLE WHEELBASE: 560 cm DAY CAB WITH AIR CONDITIONING, CAMERA ALLISON AUTOMATIC TRANSMISSION LED TRANS-COM CHAIN SYSTEM 40 TON HYDRAULIC CONTAINER LOCKING CENTRAL LUBRICATION SYSTEM FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS, COMMERCIAL VEHICLES, AND MACHINERY FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, Year of construction: 1995, CATERPILLAR 5130 complete cab for CAT 5130, incl. electronics / control unit, as shown Nedpfewlinnox Anfswf functional, very well maintained condition Location : Germany Inspection and worldwide shipping possible More parts for CAT 5130 available For further information :

Condition: used, operating hours: 5,900 h, CATERPILLAR Replacement motor for 5130 Type 3508 Only 5,900 operating hours Engine in very good condition, runs perfectly Nwsdpfswlipxex Anfsf Location Germany, worldwide shipping possible For further information :