Used Cleaning Centrifuge for sale (7,076)

Condition: used, This listing is for a Thermo Fisher Scientific Labofuge 400R refrigerated Centrifuge. The unit is in full working condition and is ready for immidate realese. The Thermo Fisher Scientific Labofuge 400R is an air-cooled, quiet operating centrifuge, with temperature control for sensitive samples. This versatile refrigerated centrifuge has a temperature range between 0-40°C to help ensure low temperatures even during an extended run or when running at high speeds. The microprocessor control then monitors temperatures to prevent sample freezing. The wide range of compatible rotors, available from Thermo, allows users to fit most tubes. Easy Controls: The microprocessor control panel is set up front for easy access, with individual indicators showing temperature, speed, and RCF settings, as well as run time. Users can set their desired parameters quickly through the touchpad controls, choose a quick run for short spins, and engage a soft start/soft break for gentle processing of more sensitive samples. Spins are powered by an induction drive that’s maintenance-free for worry-free operation. Klsdpfx Aoxx Awgeddjl Safety Features: The automatic imbalance detector will cut out the drive if the rotor is out of balance to protect components and your work. There is also rotor over speed protection to help reduce wear on components. The steel jacket system and durable construction help the system to comply with IEC 1010. The Labofuge 400R uses a highly effective cooling environmentally friendly technology, using standstill cooling, and R134A refrigerant.

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Kedexv Aaijpfx Addoll Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. ----- Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Condition: used, This listing is for a Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. The Thermo Scientific FiberLite F21-8x50y Centrifuge Rotor is a versatile and high-performance laboratory tool suitable for a wide range of applications. Here’s an organized overview of its key features, specifications, and applications: Key Features and Specifications Design and Capacity: Holds up to 8 tubes Capacity of 50 mL per tube Material: Constructed from lightweight, corrosion-resistant materials such as carbon fibre and aluminium Configuration: Fixed-angle design, with tubes positioned at a constant angle relative to the axis of rotation Compatibility: Works with various Thermo Scientific centrifuges, including: Heraeus Megafuge series Sorvall Legend series Safety Features: Automatic rotor recognition system Lid-locking mechanism to prevent accidental opening during operation Performance: Maximum speed: 21,000 rpm Maximum RCF: 52,400 x g Weight: Net weight of the rotor: 9.9 lb (4.49 kg) Biocontainment: Features a bioseal lid to ensure samples remain contained and to protect users from hazardous chemicals Environmental Considerations: Energy-efficient design with reduced waste production Key Applications Klodpexx Appofx Addol The FiberLite F21-8x50y Centrifuge Rotor is ideal for various laboratory procedures, including: Subcellular Separations: Isolating cellular components for research and analysis. Bacteria Pelleting: Concentrating bacterial cultures for further experiments. Lysate Clarification: Removing debris from cell lysates to obtain clear samples. Cell Membrane Studies: Analyzing the properties and functions of cell membranes. Sucrose Gradient Isolation: Mitochondria Endoplasmic reticulum Gradient separation of cells using solutions like Percoll, Ficoll, Optiprep, or Nycodenz This rotor combines advanced technology with practical safety and efficiency features, making it suitable for a variety of applications in research, clinical, and industrial laboratories.

Condition: used, This listing is for a Thermo Scientific 75005701 Centrifuge Rotors and Buckets. The unit is in full working condition and is ready for immediate release. Supplied with 75005702 Buckets. The Thermo Scientific 75005701 Centrifuge Rotor and Bucket are designed for use with the Thermo Scientific ST8 Bench top Centrifuge. This rotor and bucket combination offers enhanced functionality and versatility for efficient sample processing. Kledpfx Asxxy H Sjddjl Key Features: Compatibility: Specifically designed for use with the Thermo Scientific ST8 Bench top Centrifuge. Efficient Sample Processing: The rotor and bucket combination enables seamless integration with the centrifuge, optimizing performance for reliable and reproducible results. Versatile Capacity: Accommodates up to 4 buckets, providing flexibility to process different sample volumes and formats. Durable Construction: Constructed from high-quality materials, ensuring longevity and chemical resistance. Easy Installation and Removal: Precision-engineered design allows for quick and hassle-free rotor changes, minimizing downtime and optimizing laboratory workflow. Compatibility with Thermo Scientific Accessories: Compatible with a range of Thermo Scientific accessories, such as bucket adaptors and cushion adaptors, expanding the versatility of your centrifuge setup. Applications: The Thermo Scientific 75005701 Centrifuge Rotor and Bucket are suitable for various applications, including: Biological sample processing Cell culture Clinical specimen processing Laboratory testing and analysis

Condition: used, This listing is for the Eppendorf Centrifuge 5420 The unit is in full working condition and is ready for immediate use The Eppendorf 5420 is a non-refrigerated microcentrifuge designed for routine molecular biology workflows—especially spin‑column-based DNA/RNA purification, gel extraction, and PCR prep. It offers outstanding performance while saving precious bench space. Key Features & Design Highlights Compact Footprint: Measures just 24 × 35 × 22 cm (W × D × H), or approximately 9.4 × 13.8 × 8.7 in., making it ideal for crowded lab benches. High-Speed Performance: Reaches up to 15,060 rpm, generating a maximum relative centrifugal force (RCF) of 21,300 × g. Large Capacity with Flexibility: Comes standard with an aerosol‑tight rotor accommodating 24 × 1.5/2.0 mL tubes. Optional adapters support 0.2, 0.4, 0.5 mL tubes, 0.6 mL BD Microtainers, as well as a rotor for 32 × 0.2 mL PCR tubes or four 8‑strip PCR sets. Ergonomic Controls: Soft‑touch lid closure—one-finger operation. Automatic lid opening at the end of runs to minimize sample warming and ease access. One‑push short‑spin key—perfect for quick spins without holding the button. Kljdpfx Adsxhd Hbsdel Easy‑clean keypad and large, bright LCD display. Low Noise & Safety: Quiet operation at

Condition: used, This listing is for a Diamed Diacent-12 Centrifuge. The unit is in full working condition and is ready for immediate release. The Diamed Diacent-12 Centrifuge is a compact and efficient laboratory instrument designed for specific applications in immunohematology and other related fields. Here’s a concise overview of its key specifications, features, and applications: Specifications: Dimensions: 26 x 18 x 32 cm Weight: 4.8 kg Relative Centrifugal Force (RCF): 1006 g Rotor Speed: 3000 RPM Power Input: 230 V Frequency: 50-60 Hz Power Consumption: 70 W Time Setting: Up to 10 minutes Safety Features: Equipped with a break and electromagnetic lock for secure operation. Key Features: Automatic Head Detection: The centrifuge can automatically identify the head type in use, allowing for seamless program selection tailored to specific applications. User-Friendly Interface: The panel PC touch-screen interface provides easy navigation with intuitive icons, making it accessible for all users. Ksdpfx Ajxxz Nuoddoll Multi-Language Software: This feature enhances usability across different regions and user preferences. Compliance: Meets CE compliance as per IVD Directive 98/79/EC, ensuring it adheres to international safety and performance standards. Applications: Immunohematology: Ideal for blood typing and cross-matching blood samples, critical in transfusion medicine. Cell Washing: Effectively separates cells from supernatant for various laboratory applications, including sample preparation and analysis. Centrifugation of Tubes and ID-Cards: Supports a range of laboratory procedures, enhancing efficiency in processing samples.

Condition: used, This listing is for a Heraeus Biofuge Primo R Refrigerated Centrifuge. The unit is in full working condition and is ready for immediate release. The Heraeus Biofuge Primo R Refrigerated Centrifuge is an outstanding choice for small medical labs and research facilities looking for reliable and efficient sample processing. Its compact design pairs well with high-performance capabilities, making it ideal for a variety of applications. Key Features: Refrigerated Functionality: The centrifuge includes temperature control, ensuring that samples remain stable during processing, which is crucial for sensitive biological specimens. Versatile Rotor Options: The fixed angle rotor accommodates 6 x 50 mL tubes, but with the right rotor and adapter combinations, it can handle tube sizes ranging from 0.2 mL to 100 mL. This versatility allows for diverse applications from microcentrifugation to larger samples. User-Friendly Controls: A digital display shows all run parameters, while variable speed and RCF (Relative Centrifugal Force) controls let users set specific conditions. The QUICK RUN key is perfect for quick spins, enhancing efficiency. Safety and Reliability: Features include automatic rotor recognition, imbalance detection, and a dual lid-locking mechanism that ensures safe operation. It also has an electronic imbalance detection system to prevent accidents during runs. Applications: Cell Sedimentation: Ideal for isolating algae, yeast, bacteria, and cell organelles. Sample Preparation: Great for preparing DNA and protein precipitates, which are essential in molecular biology labs. Clinical Analysis: Suitable for blood and urine analyses, making it a valuable tool in medical diagnostics. Centrifugation of Microliter Tubes: Capable of processing standard test series in microliter tubes, ensuring versatility in routine analyses. Klodpexxz Svofx Addjl Specifications: Maximum Speed: 15,000 rpm Maximum RCF: 21,890 x g Control Speed: Adjustable from 300 to 15,000 rpm (±10 rpm) Noise Level:

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Ksdpfx Aoxukh Eeddell Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: used, This listing is for a Thermo Scientific TX-400 Centrifuge Rotor with Buckets. The unit is in full working condition and is ready for immediate release. Supplied with x4- 75003655 Round Buckets Maximize the efficiency of your centrifugation processes with the TX-400 rotor, specifically designed for use with various Thermo Scientific centrifuges. Key Features: Capacity: Accommodates 4 x 400 mL samples, making it suitable for larger volumes in a single run. Impressive RCF: Achieves a maximum relative centrifugal force (RCF) of 4696 x g, allowing for effective sedimentation of a variety of sample types. Kjdoxxzatspfx Addell Speed Capabilities: Operates at a maximum speed of 5000 rpm, providing flexibility for different centrifugation protocols. Tube Specifications: Diameter: 80 mm for standard tubes. Length: Capable of holding tubes up to 125 mm in length. Radius: Designed with a radius of 16.8 cm for optimal performance. Type: Features a swinging bucket design, allowing for smooth and efficient separation as the buckets swing outward during centrifugation. Biocontainment Certified: The rotor is certified for biocontainment by CAMR, ensuring safety when working with biological samples. Compatibility: Specifically designed for use with the following Thermo Scientific centrifuges: Sorvall Legend X1 Sorvall ST 16 Multifuge X1 Megafuge 16 SL 16

Condition: used, This listing is for a Sorvall Heraeus 75002000 Centrifuge Rotor with Buckets. Klodjxxy Ucspfx Addjl The unit is in full working condition and is ready for immediate release. Supplied with x4- 75002002 Round Buckets Enhance your laboratory's centrifugation capabilities with the Sorvall Heraeus 75002000 rotor, crafted for efficient performance in various applications. Key Features: Manufacturer: Sorvall Heraeus, known for reliability in laboratory centrifugation. Part Number: 75002000, ensuring you have the correct rotor for your specific needs. Maximum Speed: Capable of reaching up to 4,700 RPM, providing effective and rapid sample separation. Rotor Type: Swing Bucket Rotor design allows for smooth operation and optimal pelleting of samples as buckets swing out during centrifugation. Capacity: Accommodates 4 x 400 mL sample tubes, making it suitable for moderate volume applications. Maximum Load: Designed to support a max load of 540 g, ensuring stability even with heavier samples. Maximum RCF: Achieves a maximum relative centrifugal force (RCF) of 4618 x g, which is effective for a wide range of laboratory separation tasks. Compatible Centrifuges: Sorvall Legend Mach 1.6 Heraeus Multifuge 1S

Condition: used, This listing is for 1 of 2 MSE Micro Centaur Centrifuge. The unit is in full working condition and is ready for immediate release. The Micro Centaur is a bench top machine designed specifically for centrifuging small capacity tubes. Its small size and light weight make it ideal for transporting by hand, and using in laboratories where space is at a premium. The Micro Centaur is ideal for hospital and research laboratories, and for applications such as amino acid analyses, enzymatic, biochemical and immune assays, and for the separation of physiological fluids. Technical specifications: Voltage: 220-240 V Power: 250 W Centrifuge speed: 6,500 rpm or 13,000 rpm Kledpfx Adsxx Arqedel Timer: up to 8 minutes Rotor: fixed angle with 12 x 1.5 / 2.0 ml Outer dimensions (W) x (D) x (H): 200 x200 x 190 mm

Condition: used, This listing is for the MSE MSB010 Micro Centaur Plus Centrifuge The unit is in full working condition and is ready for immediate use Overview & Applications Designed for in vitro diagnostic (IVD) use and routine medical analysis, supporting separations of mixtures, suspensions, and bodily fluids. Lightweight (≈ 5 kg) and small in footprint (≈ 220 × 270 × 180 mm), making it ideal for benchtops, cold rooms, and transport between labs. MedWrench Rotors & Accessories Kedpfxsxhfy Ae Addsll Compatible with a wide range of rotors, including: 24‑place 2 ml rotor 18 × 0.5 ml 12 × 2 ml PCR strip rotors Haematocrit capillaries (24 × 50 mm) MedWrench Summary The MSE Micro Centaur Plus (MSB010) combines high speed, compact design, programmable flexibility, and strong safety measures. It's a reliable, maintenance-light option with long-term part availability, making it a solid addition to lab environment

Condition: used, This listing is for a Heraeus Instruments 7570 E Centrifuge Buckets. The unit is in full working condition and is ready for immediate release. The Heraeus 7570 E Rotor Buckets are designed to be used with compatible centrifuge rotors, providing flexibility and efficiency for various laboratory applications. Here’s a quick overview based on your mention of the 4 x Heraeus #7570 E Rotor Buckets: Kljdpfxsxxy H Es Addsl Heraeus #7570 E Rotor Buckets Key Features: Max Capacity: Each bucket has a maximum capacity of 600g, allowing for the centrifugation of a variety of sample types, including biological and chemical solutions. Compatibility: These buckets are specifically designed for use with Heraeus swinging bucket rotors, enhancing their versatility in centrifuge applications. Efficient Sample Processing: The design of the buckets facilitates even weight distribution and efficient separation, contributing to improved outcomes in sample processing. Material: Constructed from durable materials to withstand the rigors of repeated centrifugation cycles, ensuring reliability over time. Applications: Ideal for preparing biological samples, including cell cultures, blood products, and other laboratory specimens that require high-speed centrifugation. Benefits: Scalability: Having 4 buckets allows for simultaneous processing of multiple samples, increasing throughput in laboratory settings. Versatility: Supports various sample sizes and types, making it a valuable addition to any lab utilizing Heraeus centrifuges.

Condition: used, This listing is for a Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor. The unit is in full working condition and is ready for immediate release. The Thermo Scientific FiberLite F14-6x250y Centrifuge Rotor is a robust and highly functional component designed for a variety of laboratory applications. Here is a comprehensive overview of its key features, specifications, and benefits: Key Features and Specifications Capacity: Accommodates 6 tubes with a volume of 250 mL each Maximum Speed: Kljdpfx Ajxxz Sijddjl 10,000 rpm (up to 14,000 rpm for compatible centrifuge models) Maximum RCF: 15,316 x g (up to 30,100 x g for some compatible models) Rotor Angle: Fixed angle of 23° K Factor: 2737 Maximum Tube Dimensions: Length: Up to 125 mm Diameter: Up to 62 mm Radius (Metric): Minimum radius of 3.7 cm Biocontainment: Yes, designed for safe handling of samples Key Benefits Lightweight and Innovative Construction: Made from carbon fibre, allowing for rotor designs that are not feasible with traditional metal technologies. Durability: Corrosion and fatigue-resistant materials ensure the structural integrity of the rotor, promoting long-term reliability. Long Warranty: Backed by a 15-year warranty, providing confidence in the product’s quality and performance. Auto-Lock Rotor Exchange: Features a secure, push-button rotor exchange mechanism that allows for quick swapping of rotors in less than three seconds, streamlining the workflow in the laboratory. This centrifuge rotor is tailored for both research and clinical settings, offering unique advantages that enhance user experience and operational efficiency while delivering reliable performance.

Condition: used, Year of construction: 2020, operating hours: 9,262 h, CE mark: yes Serial number: 31xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20531 Specifications: - 2020 model - 10262 hours - Certified to: 09/25 Kodpfx Adswphwisdjll - 284 kW - 53050 kg - Track width: 60 cm - Machine width: 349 cm - 2 cam track shoes - Full track guides - Hammerglass - Serviced by owner - Undercarriage - Cleaning bucket - ​​S90 attachment - Extra hydraulics - Central lubrication - Lights - Air conditioning/ac - Lights - Ready for delivery Description: We have a 2020Volvo EC480 E excavator w/ cleaning bucket for sale. The machine is in weekly operation so the number of hours may increase. It is also certified. The owner has serviced it continuously and the machine is working as it should according to the owner. Ready for delivery Hours: 9262 Own weight: 53050 Total Weight: 53050 Year controlled: Yes Year controlled until: 09/25 Width: 349 Kw: 284 CE: Yes Model: EC480E

Condition: used, Centrifugal pump, water pump, block pump, spiral casing pump -Manufacturer: Ebara, centrifugal pump type 2CDX/A 70/12 -Flow rate: 20-80 l/min -Engine power: 0.9 kW -Speed: 2800 rpm -Pipe connection see photos -Dimensions: 385/210/H250 mm Kodjux Sbcepfx Addoll -Weight: 13.4 kg

Condition: good (used), Centrifugal pump, acid pump, caustic pump, water pump for groundwater lowering pump -Manufacturer: DIGEP Diósgyor Maschinenfabrik, centrifugal pump type DP-AMIIV -Engine: Evig 2.2 kW -Performance: 14 l/s / 840 l/min / 50.4 m³/h -Delivery height: 8 m -Pipe connection input: Ø 100 mm -Pipe connection output: Ø 75 mm -Dimensions: 580/290/H380 mm Klsdev Ai Epopfx Addol -Weight: 83 kg

Condition: good (used), Centrifugal pump, water pump, stainless steel pump, food pump, peripheral wheel pump -Manufacturer: SAWA-Schmidhauser, centrifugal pump peripheral wheel pump -Type: F30/50 -Motor: Fig 1.50 kW / 2850 rpm -Dimensions: 480/210/H190 mm -Weight: 30 kg Klsdpfx Aepg N Szsddol

Condition: used, Radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, , , ventilation fan, blower -Fan: centrifugal fan exhaust fan -Type: unfortunately without type designation -Voltage: 380V/3ph. / separate windings -Speed: 550 / 750 rpm Klsdpsq Dau Tjfx Addol -Inlet: Ø 220 mm -Air duct connection: 190 x 145 mm -Dimensions: 410/380/H190 mm -Weight: 10 kg

Condition: good (used), Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg Kjdscnha Aepfx Addoll

Condition: used, Centrifugal pump, water pump, stainless steel pump, food pump, peripheral impeller pump, coupling housing magnetic coupling centrifugal pump Kodpfx Adet Rmaiodell -Manufacturer: Sondermann, coupling housing for magnetic coupling centrifugal pump -Type: MA-EFSK-24-200-1,1/35 -Dimensions: see photo dimensions -Dimensions: 230/215/H230mm -Weight: 8kg

Condition: used, Centrifugal pump, water pump -Pump housing: Nirosta -Pump wheel: stainless steel -Max. Delivery rate: 80 m³/h -Max. H: 4 mWs -Motor power: 2.5 kW -Speed: 1415 rpm -Pipe connection inlet: DN125 -Pipe connection outlet: DN80 Kljdpfx Ajdwc I Doddjl -Number: 1x pumps available -Price: per piece -Dimensions: -Weight: 125 kg

Condition: good (used), Centrifugal pump, water pump Kodpfxjcwqd Eo Addjll -Motor power: 1.5 kW -Speed: 2850 rpm -Conveying capacity: not visible -Pipe connection inlet: 90 mm -Pipe connection output: 79 mm -Dimensions: 360/240/H370 mm -Weight: 31 kg

Condition: used, Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: Ziehl-Abegg, centrifugal fan type DKHR 310-4 -Speed: 1370 rpm -Lesitung: 0.15 kW -Protection rating: IP 44 Klsdpfx Adjguf Shsdol -Quantity: 12x blowers available -Price per piece -Dimensions: Ø 310 x 165 mm -Weight: 5.5 kg/pc.

Condition: used, centrifugal pump, water pump, submersible pump -Manufacturer: Schmalenberger, centrifugal pump type SM 50-13/2 -Flow rate: 21 m³/h Klodei Sdggopfx Addjl -Pressure: 2 bars -Motor power: 2.2 KW -Speed: 2840 rpm -Pipe connection: see pictures -Dimensions: 590/245/H440 mm -Weight: 56kg