Used Cleaning Technology for sale (29,628)

Condition: excellent (used), Year of construction: 2021, Used clean air dust collector with frequency converter Year of manufacture: 2021 Max. volume flow up to 10,000 m³/h at the fan Dedpfx Ajzizz Ssnzokr Approx. 73 m² filter area Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ safely maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Suction nozzle 355 mm Motor rated power 15.0 kW / 3-phase Voltage 400 V / 50 Hz Max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Weight 1,074 kg Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The water is pressed through the RO membrane by means of a high-pressure pump. The desalinated water/permeate is then led to consumption via a 1000 litre reservoir. The water containing the concentrated salts/concentrate is led to outlet. The relation between permeate/concentrate shall be adjusted manually on the needle valve. Dkodpfxozl E Dis Anzor Under normal operating conditions the RO membranes have a long lifetime. But even with a good raw-water quality, layers of impurities will, to a certain extent, occur and there will be a slow reduction of the permeate capacity.

Condition: used, functionality: fully functional, Comac LE 20 is a walk behind floor sweeper / scrubber is a walk-behind scrubber-dryer designed for maintenance cleaning of commercial surfaces, such as retail outlets and gyms, up to 1400 sq.m Dkjdpfxjzl E Afe Anzjr

Condition: good (used), Vacuum pyrolysis cleaning oven, vacuum pyrolysis oven, pyrolysis oven, cleaning oven, vacuum oven -Vacuum pyrolysis cleaning oven: Vacuum pyrolysis oven -Type: unfortunately without a type designation Dkodpfxszpii Dj Anzsr -Entrance opening: Ø 600 mm -Interior dimensions: Ø 600 x 2480 mm -Vacuum pump: 2.35 kW 1.33 m³/min -Individual components: see photos -Dimensions: 5200/1635/H1760 mm -Transport dimensions: 3200/1635/H1760 mm / 2000/650/H610 mm -Weight: 1210 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Pamasol Small Scale Plant Dkjdpsznwwajfx Anzer Type: 2005/100 Year: 2015 Device is in excellent condition, very little use. Unit was removed from the a "blue chip" pharma company operating in Cork, Ireland.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, working width: 2,750 mm, color: red, overall weight: 398 kg, total height: 1,000 mm, total width: 3,000 mm, machine/vehicle number: EFA00914, Hooikneuzer - stroschudder in quasi nieuwstaat - weinig gebruikt tot juli 2026 en verkoop wegens aankoop combi maaier/kneuzer. Dkodpfozq S Dtex Anzsr Altijd droog weggeborgen en netjes gereinigd en gesmeerd. Regelbaar wiel voor diepte van de veertanden. Regelbare kneuzing in 4 standen. Zeer zeldzaam te vinden in tweedehandse staat, zeker niet in deze zeer goede staat. Alles top, banden, veertanden, bewegende delen, draagraam, ...

Condition: good (used), Cleaning tank, ultrasonic cleaning basin, ultrasonic cleaner, ultrasonic bath Djdozn H Alopfx Anzekr -Manufacturer: Zender, stainless steel ultrasonic cleaning tank with heater, mobile -Basin internal dimensions: 2200/315/H280 mm -Temperature control range: 30 to 110°C -Operating temperature: max. 70°C -Ultrasonic generator: Zhangjiagang Zhongnuo type JYD -Individual components: see photos -Dimensions: 2530/315/H700 mm -Weight: 150 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, This includes 2 complete packaging lines, currently used for soil products, consisting of: 2 B&C (Bertoncello & Cecchin, Italy) tube bag machines CV 4080 DN, year of manufacture 1997, designed for 10, 15, 20, 45, 50, and 70-liter bags, and in some cases also for carrier bags, with sealing strips. 2 Latz palletizers LHP 1800 (new Siemens S7 control system in 2025). 1 Latz stretch wrapper. All with the various roller conveyors. The systems are still assembled and in operation, until approximately week 38. Djdpfx Aezr E T Ronzekr Inspection is possible by appointment.

Condition: ready for operation (used), Year of construction: 2016, Brand: HAKO Model: Scrubmaster B650 Year of manufacture: 2016 Capacity: 3200 m²/h Scrubbing width: 65 cm Drive: 24V Clean water tank: 72L Dirty water tank: 74L Internal charger, 220 volts. Dkjdjzqnclopfx Anzor

Condition: used, The Nilco BA33-33E cleaning machine is a compact, high-performance scrubber-dryer designed for the thorough cleaning of hard floors. Technical data: Dodpezry Amjfx Anzjkr - Motor: 1.3 kW - Weight: 37 kg - Working width: approx. 40 cm

Condition: used, Year of construction: 2018, total length: 2,070 mm, lifting height: 4,560 mm, fork length: 1,150 mm, load capacity: 2,000 kg, - Antrieb Elektro - Bedienung: Geh/Stand - Nenntragkraft: 2000 kg - Lastschwerpunktabstand: 600 mm - Lastabstand: 724/646 mm - Achslast mit Last antriebsseitig/lastseitig: 1213/2295 lg - Achslast ohne Last antriebsseitig/lastseitig: 1096/412 kg - Bereifung: Polyurethan - Anzahl Räder (x = angetrieben) antriebsseitig/lastseitig 1x + 1/2 (1x + 1/4) - Spurweite antriebsseitig/lastseitig 534/370 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs 2503/2892 mm - Wenderadius 1620/2009 mm - Fahrgeschwindigkeit mit/ohne Last km/h: 4,0/4,0 6,0/6,0 8,0/10,0 Dksdpjztgbxsfx Anzjr - Hubgeschwindigkeit mit/ohne Last m/s 0,15/0,30 - Senkgeschwindigkeit mit/ohne Last m/s 0,31/0,31 - Max. Steigfähigkeit mit/ohne Last 8,0/23,0 % - Betriebsbremse Elektromagnetisch - Art der Fahrsteuerung AC-Steuerung - Schalldruckpegel (Fahrerohr) dB(A) ≤66 - Anzeige- und Bedieneinheit mit Farbdisplay zur Wahl der Fahrprogramme - Pneumatisch gedämpfte klappbare Standplattform - Integrierte Ablagemöglichkeiten - 2 Tonnen Tragfähigkeit mit Initialhub bei nicht genutztem Masthub - Griffoptimierte Deichsel für Links- und Rechtshänder - Zweistufen-Einstellmöglichkeit für besonders feinfühliges Heben und Senken - Energiesparprogramm Blue-Q - Leistungsstarker Drehstrom-Fahrmotor für sehr geringe Wartungskosten - Elektrische Lenkung: Drehstrom-Lenkmotor (AC) für besonders ermüdungsfreies Arbeiten - Proportionalventiltechnik für besonders feinfühlige Bewegungen - Voll gekapselte, schmutz- und staubunempfindliche Komponenten - Zugriffsberechtigung STILL Schlüssel - Lastschutzgitter - Batterieraum für Batterie bis 250 Ah für Batteriewechsel mittels Kran

Condition: used, Year of construction: 1998, total length: 3,250 mm, lifting height: 4,275 mm, load capacity: 870 kg, Warehouse technology Dedpeztf Ukefx Anzskr Still EGG 10 Drive Electric Year built 1998 Lifting height (mm) 4,275 Lifting weight (kg) 870

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Dkodezn Ak Sopfx Anzjr Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCG Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Dkjdpfxozn Ak Eo Anzer Series: FREQROL Model: FR-SF-2-26K-TCG Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCG AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Year of construction: 1995, Mitsubishi Operation Board 4YZ405B-3 for MAZAK MULTIPLEX 620 MARKII For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Specifications: Manufacturer: Mitsubishi Electric Corporation Description: Operation Board Part Number: 4YZ405B-3 Manufacturing Date: 1995 Made in Japan Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: MAZAK MULTIPLEX 620 MARKII May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Dkedpfx Anjzn Akrjzsr Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: used, Mitsubishi Operation Board YZ417A-3 for MAZAK MULTIPLEX 420 For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Specifications: Manufacturer: Mitsubishi Electric Corporation Dedpozn Aklsfx Anzjkr Description: Operation Board Part Number: YZ417A-3 Manufacturing Date: January 1990 Made in Japan Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: MAZAK MULTIPLEX 420 May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCE Type: AC Spindle Controller / Spindle Drive Power Rating: 26 kW Dedpfezn Akfsx Anzjkr Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: used, Year of construction: 1990, Mitsubishi Operation Board YZ417A-3 for MAZAK MULTIPLEX 420 For sale is an original Mitsubishi Operation Board (Operator Control Panel) removed from a MAZAK MULTIPLEX 420 CNC turning machine. Dksdszn Ai Iepfx Anzjr Specifications: Manufacturer: Mitsubishi Electric Corporation Description: Operation Board Part Number: YZ417A-3 Manufacturing Date: January 1990 Made in Japan Condition: The operation board was professionally removed from a machine. It is in used condition with normal signs of wear, including scratches and surface marks (see photos). The display and all control buttons are included as shown. Scope of Delivery: Complete Mitsubishi Operation Board as shown in the photos No additional accessories included Compatible With: MAZAK MULTIPLEX 420 May also be compatible with other MAZAK machines equipped with Mitsubishi CNC controls. Please verify compatibility using the part number YZ417A-3 before purchasing. Note: This is a genuine used OEM replacement part removed from a machine. It is sold in the used condition as shown in the photos.

Condition: used, Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Dkjdpozn Aizofx Anzsr Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K Type: AC Spindle Controller / Spindle Drive Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Max. volume flow rate: 5000 m³/h Nominal volume flow rate: 20 m/s, 3540 m³/h Nominal negative pressure at 20 m/s: 2500 Pa Residual dust concentration: 0.1 mg/m³ Sound pressure level: 75 dB Dksdpfsznwz Ssx Anzer Container Automatic filter cleaning Spark arrester The ductwork to multiple machines can be included Operational shutdown Dimensions: 2640 x 1140 x 2260 mm Extraction connection: 250 mm Weight: 825 kg Motor power: 5.5 kW Motor voltage: 400 V (50 Hz)

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 numerical axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel guides with numerical adjustment with 21 drilling spindles (10 left and 11 right) Spindle spacing: 32 mm max. drilling distance: 640 mm max. tool diameter: 40 mm max. drilling depth: 65 mm max. horizontal drilling height: 35 mm Working height: 860 mm max. plate thickness: 60 mm max. plate size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per working cycle: 5 NL Dedpfxjlk R Eps Anzjkr Dust extraction connection: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, Sweeper-scrubber machine Technical condition: good Djdpfx Asukrcponzjkr Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear: 1 x bandage wheel; Power steering; Front windshield; 2 x front/ StVZO-like AS; Overall height ready to operate: 2300 mm

Year of construction: 2019, condition: like new (used), ASYS ACS 02 * Year of manufacture: 2019 * Serial number: 084939 * Machine length: 1,060 mm * Supply voltage: 400 VAC / 50 Hz Djdpfxozqcwws Anzjkr * Power connection: 3-phase * Rated current: 2.7 A * Connected power: 1.5 kW * Fusing: 16 A * Operating pressure: 6 bar * Condition: Used, operational

Condition: new, FANUC MONITOR D12CM-01B - A61LL2 - NEU OZUCHI Condition: NEW, incl. packaging Dsdpfezman Sjx Anzekr

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 400 kg Dimensions (LxBxH): 170 x 132 x 113 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 1924 - Drive system: Conventional - Rotary table: Yes - Number of turbines [pcs]: 1 - Max. workpiece length [mm]: 600 - Max. workpiece height [mm]: 265 - Transport dimensions: 1700mm x 1320mm x 1130mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dodpfx Aezkqx Aonzjkr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum