Used Cnc Swiss Type Lathe for sale (43,052)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Fsdpfx Asnxkcqoa Espd Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: ready for operation (used), controller model: Siemens Sinumerik 840C, total width: 2,850 mm, total height: 2,300 mm, swing diameter over cross slide: 1,500 mm, additional equipment features: yes, Uitgerust met Shunk chuck dia 500 mm VDI-tools Voor het voltooien van moeilijke bochten! CNC-hoogrendementsdraaibanken, waarvan de sterke punten vooral tot uiting komen bij harddraaien. Een belangrijk kenmerk van alle Monfort-draaibanken is de hydrostatische ronde geleiding, die slijtagevrij is en een geoptimaliseerde trillingsdemping heeft. Bovendien levert deze op lange termijn optimale oppervlakteresultaten bij draaien, frezen, boren en draadsnijden. • Hoge stijfheid tegen snijkrachten • Zeer goede demping van trillingen • Dit resulteert in een lange standtijd • Hoogste draainauwkeurigheid • Weerstand tegen continue spanning • Absolute vrijheid van slijtage • Droog bewerken is mogelijk Monfort-lagers maken gebruik van hydrostatische lagersystemen en geleidingen. De voordelen hiervan zijn: - Uitstekende loopnauwkeurigheid - Uitstekende dempingseigenschappen - Hoge stijfheid, onafhankelijk van de snelheid - Goede thermische stabiliteit - Geen slijtage en dus langdurige nauwkeurigheid - Langere standtijd van het gereedschap Vergelijkbaar met de Hembrug hydrostatische precisiedraaibank Fpjdpfoyl A Efsx Aa Esd Swing over bed: 720 mm Max longitudinal travel Z-axis: 1500 mm Max cross travel X-axis: 320 mm Spindle cone: A2-11 Dia of spindle bore: 110 mm Power on the spindle: 62 kW Number of speeds: 4000 rpm Length: 5600 mm with scrap conveyor Weight: +-8500 kg Toolchanger: yes Number of tools: 12x

Condition: ready for operation (used), controller model: Heidenhain Manual Plus, empty load weight: 1,500 kg, total length: 2,870 mm, total width: 1,510 mm, total height: 1,550 mm, swing diameter over cross slide: 1,000 mm, Pinacho Rayo 180 Ø 360 x 1000 mm CNC Swing over bed: 360 mm Swing over cross-slide: 198 mm Dia of spindle bore: 42 mm Fjdoyl A D Ispfx Aa Eopd Power on the spindle: 5,5 HP Number of speeds: 100 > 4000 rpm

Condition: ready for operation (used), controller model: Fanuc 310i, empty load weight: 10,000 kg, total length: 4,500 mm, total width: 1,990 mm, total height: 2,300 mm, swing diameter over cross slide: 950 mm, Spindel 1: 20 kW - 5000 tpm - spindelboring: 70 mm Revolverkop 1: 12 aangedreven gereedschappen - 2,5 kW - 4000 tpm Aangedreven C-as X1 uurwerk: 165 mm Y1 beweging: +50/-30 mm Z1 uurwerk: 678 mm Spindel 2: 17 kW - 5000 tpm - spindelboring: 42 mm Revolver 2: 12 aangedreven gereedschappen - 2,5 kW - 4000 tpm Aangedreven A-as X2 uurwerk: 165 mm Z2 uurwerk: 640 mm Iemca Master 880 P staafaanvoer Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Fodpfx Aov Rwltea Espd Number of speeds: 5000 rpm Chuck: Ø 175 mm Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Condition: ready for operation (used), controller model: Siemens Sinumerik, empty load weight: 35,000 kg, total length: 7,000 mm, total width: 2,300 mm, total height: 3,300 mm, PORTAL WHEEL LATHE Siemens CNC control track wheel diameter range: 540 1400 mm axle length: max 2600 mm max track: 1435 mm max. workpiece weight: 5 tons main power: 100 kW cutting speed: max 500m/min Railset lathe / Railway lathes / Rail lathe Fpjdpjv St E Eefx Aa Esd high machining accuracy in terms of concentricity and surface quality optimal force parallelogram measuring system for diameter and profile wear measuring system for CL+CR determination measuring system for determining the concentricity of the drive shaft measuring system for wheel and axle brake discs re-profiling of all common locomotive, passenger car and wagon wheel sets planning of axles and wheel brake discs rim processing axle processing marking groove turning Chip shredder included

Condition: ready for operation (used), controller model: Fanuc, swing diameter over cross slide: 2,000 mm, Uitgerust met SK-kit: - automatische gereedschapswisselaar 8 posities - VDI-type - hydraulische klauw - hydraulisch contrapunt - hydraulisch centrum Swing over bed: 620 mm Swing over cross-slide: 580 mm Dia of spindle bore: 80 mm Power on the spindle: 11 kW Fpedpfx Aoyl A Dzsa Eed Number of speeds: 1 > 2500 rpm Toolchanger: yes Number of tools: 8 positions

Condition: ready for operation (used), controller model: Num, empty load weight: 35,000 kg, total length: 11,000 mm, total width: 2,950 mm, total height: 2,000 mm, swing diameter over cross slide: 6,500 mm, Robuuste draaibank met 4 geharde lineaire geleidingen Maximaal werkstukgewicht: 20 ton bestemd voor staalfabrieken, walsgieterijen, smederijen voor het maken van producten zoals turbinerotoren, grote assen en staafproductie Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Power on the spindle: 81 kW Fpodpfx Aaowaiu Rs Ejd Chuck: 900 mm

Condition: ready for operation (used), controller model: CNC, empty load weight: 70,000 kg, total length: 10,000 mm, total width: 3,230 mm, total height: 1,900 mm, swing diameter over cross slide: 6,000 mm, Geharde draaibank met 4 geharde lineaire geleidingen Gewicht van het werkstuk tussen de centers: 20 ton Siemens aandrijvingen en motoren Heidenhain-linialen en encoders Super Lathe-principe/licentie van Binns Machinery (VS). De ultieme prestaties voor zware draaibanken, bedoeld voor staalfabrieken, walsgieterijen en smederijen voor de productie van producten zoals turbinerotoren, grote assen en staafproductie. Fedpowaivhefx Aa Ejpd Meest opvallende verschillen met een normale draaibank: veel breder bed = zeer hoge stijfheid = geen trillingen meer zwaar en omvangrijk vervoer ook voor stijfheidsdoeleinden zware werkstukken kunnen tussen de centers worden geplaatst het totale gewicht van de rollenbank is erg hoog Swing over bed: 1200 mm Swing over cross-slide: 850 mm Power on the spindle: 165 kW Number of speeds: 3 > 320 rpm

Condition: good (used), Year of construction: 2007, Number of NC axes: 5 Bar capacity: 42 mm Max. turning length: 100 mm Max. swing diameter: Ø 700 mm Rapid traverse: 17.5 m/min MAIN SPINDLE Max. spindle speed: 4,000 rpm Spindle power: 7.5 kW Collet chuck: DIN 173E Tool holder (square): 20x20 mm Fedpfx Aajxa Ex Nj Eepd Tool holder (round): Ø 20/25 mm C-axis resolution: 0.1° TOOL POSITIONS Total: 14 Outside main spindle: 5 Inside main spindle: 3+4 Driven tools: 2 Simultaneous machining: internal + external Weight: 2,700 kg Bar feeder for 3m bars

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 06800001511, Used: CNC vertical lathe Manufacturer: DMG/ GILDEMEISTER Fodpfx Aewzk D Asa Ejpd Model: CTV250 Year of manufacture: 2003 Serial number: 06800001511

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1114.3705-24, Used CNC Lathe Make: Boehringer Type: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine has the following features: 1000mm turning length No tailstock Driven tools Special indexing chuck Siemens 840C control system The Boehringer VDF 250Cm is a CNC lathe designed for machining chucked parts. It is characterized by its robust construction and precise machining capabilities. Technical Specifications (Model Year 1997) Working Area: Swing over Bed: 550 mm Swing over Cross Slide: 480 mm X-Axis Travel: 405 mm Z-Axis Travel: 1,099 mm Maximum Turning Length: 1,000 mm (None) Tailstock: Fjdpjwlap Aefx Aa Eopd Tool Turret: Number of Positions: 12 Tool Holder: VDI 50 DIN 69880 Live Tools: YES Spindle: Spindle Head Size: 8 DIN 55026 Spindle Bore: 103 mm Max. Chuck Diameter: 315 mm Max. Drive Power (50% Duty Cycle): 53 kW Max. Torque: 780 Nm Speed Range: 30–3,000 rpm Feeds: Automatic Feeds: 1–10,000 mm/min Rapid traverse speed: 10 m/min (X and Z axes) Max. feed force: 15 kN Dimensions and weight: Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm Machine weight: approx. 11,000 kg Equipment: Pivoting control panel Hydraulic system from HYDROKRAFT Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW Chip conveyor with 325 l tank capacity, right-hand discharge 3-jaw power chuck Oil mist extraction Control cabinet with cooling unit and temperature controller from RITTAL Control system: SIEMENS SINUMERIK 840 C Variants and Differences There are various variants of the VDF 250 series, such as the VDF 250 CU, which can be equipped with different control systems (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are designed as pure chuck-type lathes without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe characterized by its stability and precision. With its robust construction and extensive features, it is ideally suited for machining chucked parts in a variety of production environments.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,530 h, Control Unit Brand FANUC Model 31i-Model B Main Drive Number of axis 3 Fedpjx D I Axefx Aa Ejpd This 3-axis Star SR-20J N was manufactured in 2019. It's a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, operating hours: 51,488 h, This Citizen CINCOM A32-VII CL swiss type turning machine was manufactured in 2014. It features a main spindle with a 32 mm capacity, a counter spindle, and a maximum turning length of 3000 mm. Equipped with a high-speed CHIDOMI system, it supports simultaneous movements across all axes and offers a feed rate up to 9,000 mm/min. Consider the opportunity to buy this Citizen CINCOM A32-VII CL swiss type turning machine. Contact us for more information about this machine. Application Types Fodpfsx D Nhpjx Aa Eopd Turning

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Fpedpfx Aoyn Em Rsa Ejd Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Fpodpfxeyrpyve Aa Ejd Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m Fpedsyrn I Sepfx Aa Ejd weight of the machine ca. 2850 kg Additional information CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: used, Year of construction: 2000, max swing diameter 700mm, X/Y 255/520mm, tailstock, 12-position tool turret, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 12t Fsdpsym Sm Uofx Aa Eopd

Condition: used, MAKE – TUSCAN MODEL – TL29 YEAR – 2002 Fpodpfswmlcdex Aa Ejd CONTROL – FANUC OT TURRET – 8 POSITION WITH LOADS OF HOLDERS SWING OVER BED – 740 mm SWING OVER CROSS SLIDE – 420 mm CENTRE DISTANCE – 4000 mm SPINDLE BORE – 250 mm TRAVERSES – X-AXIS 500 mm/Z-AXIS 3700 mm SPEED – 15-700 RPM MOTOR – 3 SPEED GEARBOX MOTOR 30KW SWARF CONVEYOR 4 JAW CHUCK SWARF CONVEYOR

Year of construction: 2012, condition: excellent (used), Type of CNC HURCO ULTIMAX Turning length 483 mm Turning Ø 256 mm Ø above the bed 548.6 mm Ø above transversing slide 320 mm Length between centers 584.2 mm X-axis 203.2 mm Z-axis 508 mm Max workpiece weight kg Fpodpfspiay Sex Aa Eod Spindle bore 61 mm Number of turrets 1 Number of tools on turret 10 Number of rotating tools 10 Turning speed 4800 rpm Spindle motor power 11.2 kW Tailstock

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - Fpedpfx Aasrfx Tnj Esd STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: used, Year of construction: 2002, turning diameter max. 480 mm turning length max. 2.000 mm control Sinumerik 840 D Siemens swing diameter max. over bed cover 520 mm turning speed range - main spindle 7 - 2.800 min/-1 transmission ratio 2 power capacity - main spindel 53 kW max. Torque 3.456 Nm spindle nose 11 DIN 55026 chuck diameter 315 mm spindle bore 103 mm usable bar diameter 82 mm x-travel 405 mm Fjdpfsvy Ig Tex Aa Eopd z-travel 2.049 mm diameter of quill 100 mm quill stroke 100 mm tension force 14 kN capture 30 DIN 2079 rapid traverse 10 m/min Working speed 0,1 - 10.000 mm/min feed power 15 kN number of toolpositions 12 pos. driven statition 6 pos. Shank diameter 50 mm power capacity 5,4 kW Max. Speed 2.500 / 625 min/-1 max. Torque 25 / 100 Nm total power requirement ca. 50 kW weight of the machine ca. 14 t dimensions of the machine ca. 6,4 x 3,8 x 3,0 m CNC-Lathe VDF BOEHRINGER - VDF 315 Cm / DL 2000 - incl. 2x Workbench

Condition: defective spare-parts repository (used), Year of construction: 1987, functionality: not functional, Fault: Short circuit in motor control board (see display) Max. turning diameter over bed: 280 mm Max. turning diameter over cross slide: 140 mm Travel: Z = 350 mm, X = 230 mm Spindle bore: 41 mm Max. spindle bore: 41 mm Tool holder: Baruffaldi 4-position Tailstock Fpedjyrqwiopfx Aa Esd Dimensions LxWxH: 2600 x 2000 x 1900 mm Weight: 1,500 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, FOR SALE - CNC Lathe RICHYOUNG RIC-TC52160 Year: 2009 Configuration: 2 steady rests, tailstock machining CNC control: FANUC Series 0i-TC Specifications Swing over bed: 1300 mm Center height: 650 mm Fpsdpfx Aaoypuh Hs Eed Swing over cross slide: 900 mm Distance between centers: 4200 mm Bed width: 770 mm Spindle Spindle bore: 410 mm Spindle diameter: 165 mm Spindle stroke: 300 mm Spindle taper (integrated sleeve): MT No.6 Spindle motor: 22 / 33 kW Option: 28 / 42 kW Travel & feeds Longitudinal Z-axis travel: 4000 mm Cross X-axis travel: 680 mm Ball screws: X-axis: Ø40 × pitch 8 Z-axis: Ø80 × pitch 16 Rapid traverse X-axis: 5 m/min Rapid traverse Z-axis: 5 m/min Drives X-axis motor: 17.3 Nm Z-axis motor: 51.1 Nm Equipment Lubrication / coolant pump: 6 bar Dimensions and weight Footprint: Length 8.90 m × Width 2.20 m × Height 2.30 m Weight: 16 t

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, FOR SALE Hyundai HIT 18S CNC Lathe This 2-axis model (X + Z) is designed for machining medium-sized parts, offering high precision and reliable CNC control. Main technical specifications Machining capabilities - Maximum turning diameter: approx. 254 mm - Maximum turning length: approx. 500 mm - Swing over bed: approx. 440 mm Axis travel - X axis (cross travel): approx. 180 mm - Z axis (longitudinal travel): approx. 510 mm - Note: 2-axis CNC (X + Z) — no native C-axis on this model. CNC control - System: Siemens 840C or HiTrol variant (840C), depending on configuration. Spindle and tooling - Max. spindle speed: approx. 3600 rpm - Spindle motor power: approx. 15 kW - Turret: 1 turret with 8 tool stations - Chuck: 3-jaw standard with through-hole clamping Accessories and options - Chip conveyor: generally included - Automatic tool presetting: often included - Tailstock / bar feeder: generally not included Fpsdpfoydp Drjx Aa Eod Dimensions and weight - Dimensions (L × W × H): approx. 2600 × 1650 × 1830 mm - Weight: approx. 4300 kg Best regards,

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, FOR SALE Hyundai HiT 30M CNC Lathe — Technical Overview 3 AXIS Fpsdpfx Ajydp E Noa Esd Brand: Hyundai (Hyundai WIA) Model: HiT‑30M Machine: CNC Lathe (Turning Center)