Used Cnc Turning Centre for sale (15,357)

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min x-travel 1000 mm y-travel 500 mm z-travel 570 mm Control Siemens weight of the machine ca. 5000 KG Caedpfx Afsud Al Helea

Condition: used, Year of construction: 2000, Turning length 1000 mm Max. swing 640 mm dia. Max. turning 540 mm dia. Spindle bore 51 mm Max. Spindle speeds 4000 rpm (same for subspindle) Max. spindle speeds on milling spindle 6000 rpm No. of stations in tool changer 40 pcs. Control: Casdpfx Afsp Ui N Hslsa PC Fusion 640 MT Equipped with: Gantry loader 10 pcs. tool holders

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 Caedpfxjwz Rifs Afloa CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: ready for operation (used), Swing diameter over bed/cross slide: 800mm/500mm, max. turning diameter: 590mm, max. turning length: 650mm, spindle power: 30kW, speed: 2500rpm, bore: 105mm, bearing: 160mm, travel X/Z: 300mm/670mm, rapid traverse X/Z: 12m/min/16m/min, tool positions: 8. Machine dimensions X/Y/Z: approx. 1850mm/2700mm/3100mm, weight: approx. 8500kg, control: Fanuc. Dokumentation vorhanden. An on-site inspection is possible. Cedpfx Afoxyk T Seljaa

Condition: used, Year of construction: 2006, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: Haas, total height: 2,750 mm, total length: 2,250 mm, total width: 2,360 mm, table width: 914 mm, table length: 356 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 914 x 356 mm Table load 680 kg Number of pallets: 1 x Movement X-axis 762 mm Movement Y-axis 406 mm Movement Z-axis 508 mm Spindle taper DIN 68971A Spindle speed 12.000 1/min Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Csdpfxsxnm A Eo Afleaa Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Cedpfx Afjur Hfzsleaa

Condition: excellent (used), Year of construction: 2014, operating hours: 11,200 h, functionality: fully functional, spindle motor power: 28 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, type of input current: three-phase, torque: 479 Nm, workpiece weight (max.): 5,700 kg, total height: 3,155 mm, total length: 6,760 mm, total width: 4,060 mm, overall weight: 15,500 kg, tool length: 250 mm, Equipment: documentation/manual, Soraluce TAA25 milling machine from 2014 with HEIDENHAIN TNC530 CNC. In 2024: hydraulic unit replaced and complete retrofit of head and spindle. Travels X/Y/Z [mm]: 2,500 x 1,000 x 1,000. Table [mm]: 2,700 x 850. Head indexing [°]: 2.5 x 2.5. Spindle speed [rpm]: 4,000. Power and torque [kW - Nm] S1: 28 - 479. Tool magazine: 20 positions – ISO 50. Casdpfoxwna Rsx Aflsa

Condition: excellent (used), With C-axis With driven tools FANUC TXP-200 FA control Casdpfx Afjq Dlt Solsa Turning diameter max 360 mm Turning length -683 mm Swing Diameter -450 mm Spindle speeds -3'000 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2004, operating hours: 19,400 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, turning diameter: 190 mm, spindle bore: 49 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 24 m/min, milling spindle length: 60 mm, rotational speed (max.): 6,000 rpm, Equipment: bar feeder, chip conveyor, Multi Axis Mori Seiki ZT-1000Y Year 2004 8-axis turning milling machine With LNS bar feeder Many tool-holders and live-tools included Max. workpiece turning diameter: 250 mm Max. distance between spindles: 750 mm Max. turning diameter: 190 mm Max. turning length: 190 mm Standard bar diameter: 170 mm Max. bar capacity: 120 mm X-axis travel: ±135 mm Z-axis travel: ±440 mm Y-axis travel: ±40 mm Caodpfx Afow H Dnfelea B-axis (spindle 2) travel: 510 mm Spindle speed range: 60–6000 rpm Spindle bore: 49 mm Spindle nose diameter: 80 mm Min. spindle indexing angle: 0.001° Turret type: 12 stations Tool shank diameter: 20 mm Max. live tool speed: 6000 rpm Live tool machining capacity: Ø13 mm drill / M12 tap Live tool motor power: 3.7 / 2.2 kW Rapid traverse speed: X1/X2: 18000 mm/min, Z1/Z2: 24000 mm/min, Y: 6000 mm/min Main spindle motor power: 7.5 / 5.5 kW Machine dimensions (L×W×H): 2797 × 2010 × 1995 mm Machine weight: 5000 kg Power requirement: 46 kVA

Condition: ready for operation (used), Year of construction: 2005, Offered is a Geiss 5-axis CNC milling machine. Travel ranges X/Y/Z/B/C 3000mm/1200mm/750mm/365°/520°, spindle GEISS ER45, max. speed: 40000rpm, power: 6kW, total weight approx. 5000kg, dimensions X/Y/Z approx. 6000mm/3700mm/2700mm. The machine is equipped with a detachable noise protection enclosure. Viewing by appointment possible. Codpfx Afexxbageleaa

Condition: used, Year of construction: 2021, travel distance X-axis: 1,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 740 mm, controller manufacturer: Fanuc, controller model: Series 0i-MF Plus, workpiece diameter (max.): 800 mm, total height: 3,435 mm, total length: 5,575 mm, total width: 4,621 mm, overall weight: 18,000 kg, Equipment: documentation/manual, CNC 5-axis Vertical machining Centre CNC Control Fanuc Series 0i - MF Plus Table size Ø 800 mm Number of pallets 1 Maximum workpiece dia x height Ø 1200 x 300 mm Movement X-Y-Z-axis 1600 x 700 x 400/740 mm C-Axis (table rotation) 360° B-Axis travel -11 /+30 ° Spindle speed 15.000 r/min Spindle Taper Big Plus BT40 Spindle motor 18,5/15 kW Cjdpfx Asxnmhnsflsaa Magazin Capacity 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), travel distance Z-axis: 600 mm, feed length X-axis: 800 mm, feed length Y-axis: 900 mm, controller manufacturer: Siemens 840D, controller model: Siemens 840D Solution Line, total height: 3,415 mm, total length: 4,500 mm, total width: 4,450 mm, empty load weight: 17,000 kg, chuck outer diameter: 700 mm, Type: Ultrix 800 RT De Ultrix 800 RT is een multifunctioneel bewerkingscentrum met 5 geïnterpoleerde assen en een bewegend portaal voor het snel frezen, draaien, slijpen, boren, tappen, afwerken, ontbramen en ruwen van complexe onderdelen. Bij gebruik voor draaien verticale draaibank: - draaibereik: 1100 mm - maximaal gewicht van het werkstuk: 700 kg - 40/30 kW op tafel - max. koppel op de tafel: 1500 Nm - maximale snelheid van de tafel: 1000 tpm !! - hydraulische klemming op tafel - gereedschapsconus voor draaien: KM63 - Gereedschapswisselaar met 150 posities en 24 gereedschapsposities voor het draaien Bij gebruik voor frezen, slijpen, boren, ... bewerkingscentrum: - X-as: 800 mm - Y-as: 900 mm - Z-as: 600 mm - A-as: -30° / 110° - C-as: continu - maximaal gewicht van het werkstuk: 700 kg - 55/40 kW op spindel - max. koppel op de spindel: 22 Nm - max 40.000 tpm - gereedschapsconus voor frezen: HSK-E40 - Gereedschapswisselaar met 150 posities en 126 gereedschapsposities voor frezen, slijpen en boren Lijst met op de machine gemonteerde opties: 1 - 40.000 tpm hogesnelheidsspindel 2 - tafel dia 700 mm met hydraulische klemming 3 - 150-positie gereedschapswisselaar 4 - spaantransportband 5 - koelsysteem met terugwinning 6 - Koelvloeistoftemperatuurregeling 7 - hoge druk koeling (40 tot 70 bar) door spindel Codpfxsxadmfj Afloaa 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstellingssysteem en gereedschapsintegriteit: laser- en mechanische taster voor meetgereedschappen 11 - Renishaw-meetkop Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: excellent (used), Year of construction: 2011, CNC Turning-Milling Center MTCUT T20MC Year of manufacture: 2011 Driven tools available Accessories included Technical data: Working area • Max. swing diameter: Ø 470 mm (18.5”) • Max. machining diameter: Ø 280 mm (11.02”) • Max. machining length: 508 mm (20”) • Bed slide and inclination angle: 45° Bed Cajdpoxtnhaefx Aflea • Max. longitudinal travel (Z-axis): 520 mm (20.47”) • Z-axis servo motor: 1.4 kW (1.8 HP) • Z-axis rapid traverse: 30 m/min (1181”/min) • Max. cross travel (X-axis): 176 mm (6.93”) • X-axis servo motor: 1.4 kW (1.8 HP) • X-axis rapid traverse: 30 m/min (1181”/min) Spindle • Main spindle bore / draw tube diameter: Ø 62 mm (Ø 2.44”) / Ø 52 mm (Ø 2.04”) • Spindle nose: ASA A2-6 • Taper angle of the bore in 8" spindle: 1/20 • AC main spindle motor: FANUC 7.5/11 kW (10 HP / 15 HP) • Speed (8" main spindle): Standard 4500 rpm Tool turret • Type: Hydraulic clamping device • Boring bar diameter / position: Ø 32 mm • Turning tool cross-section / position: □ 20 mm × 20 mm / □ 25 mm × 25 mm Tailstock • Quill diameter: Ø 75 mm (2.95”) • Stroke: 425 mm (16.73”) • Quill type: Fixed • Quill taper: MT No. 4 • Quill travel: 100 mm (3.94”)

Condition: good (used), Year of construction: 2003, movable headstock 10 axes Spindle speed 0 - 10,000 rpm C axis TOOL CARRIER (X1-Y1 / X2-Y2) - 2 independent cross slides with 2x5 tools - Drive unit 100 - 8,000 rpm for up to 4 driven tools on X2-Y2 NO front attachment SUB-SPINDLE (X4-Y4-Z4) - Spindle speed 100 - 8,000 rpm - Slide with 3 independent axes SECONDARY OPERATIONS - Turret with 7 positions (4 axial and 3 radial) - Spindle speed 100 - 10,000 rpm Codpfoxp Nf Sex Aflsaa Part conveyor Bar feeder Robobar SBF 532

Condition: used, Year of construction: 2002, - Siemens 840D Sinumerik control system - Driven tools - 12 tool positions - Drag frame magazine 20 places - chip conveyor - Coolant system - Year of construction 2002 Technical data: - Rotation Ø: 235 mm - Z-axis (vertical): 250 mm - X-axis (horizontal): 450 mm + 370 mm - Workpiece height: 100 mm - Ø in front bearing: 90 mm - Spindle head with short taper DIN 55026: A5 - Hollow shaft motor with oil circulation cooling: integrated in the headstock - Nominal power 100% ED: 29.3 kW - Nominal torque 100% ED: 200 Nm - Nominal speed: 1400 rpm - Maximum speed: 6500 rpm - Z-axis travel speed: max. 30 m/min - Traversing speed X-axis: max. 60 m/min Tool changer: Casdpfx Afjrbltpslja - Number of switching positions: 16 - Permissible tangential torque (turret locked): 1300 Nm - Permissible mass moment of inertia of tool disk, tool holders and tools: 2.5 kgm² - Permissible unbalance (load torque) due to equipping with tool holders and tools: 32 Nm - Hydraulic operating pressure: 50 bar ± 10% - Weight of the turret: approx. 50 kg Dimensions - Dimensions WxHxD: 4400 x 2800 x 2600 mm - Machine weight: approx. 7000 kg

Year of construction: 2020, condition: ready for operation (used), Main Drive Number of axis 3 Spindle Speed 18000 RPM Spindle motor power 5.6 kW Movement Cedpfjxy Anhex Afleaa X-Axis Movement 3350 mm Z-Axis Movement 180 mm Y-Axis Movement 200 mm This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17" touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Mazatrol, controller model: 640 M, total height: 2,700 mm, total length: 3,445 mm, total width: 3,301 mm, table width: 1,300 mm, table length: 550 mm, overall weight: 8,900 kg, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg Movement X-Axis: 1050 mm Movement Y-Axis: 510 mm Movement Z-Axis: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 -6000 1/min. Magazine capacity: 30 positions Weight of the machine: 8900 kg Caodpjxnklwsfx Aflsa If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Electric spare parts Mazak Mazatech V-10 Complete electric cabinet and operating panel Control Mazatrol M32 Free loading onto truck Fixed price Cedpjxtq N Hefx Aflsaa

Condition: ready for operation (used), Year of construction: 2000, operating hours: 7,487 h, functionality: fully functional, machine/vehicle number: 23MS0122, turning length: 492 mm, turning diameter: 290 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, swing diameter over bed slide: 550 mm, controller model: Fanuc Series 18-T, TECHNICAL DETAILS Capacity Swing diameter over bed: 550 mm Swing diameter over cross slide: 390 mm Maximum turning diameter: 290 mm Maximum turning length: 492 mm Travel X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° (0.001° increment) Spindle Maximum main spindle speed: 4,500 rpm Maximum sub-spindle speed: 6,000 rpm Chuck diameter: main spindle 210 mm / sub-spindle 135 mm Spindle bore: main spindle 76 mm / sub-spindle 45 mm Driven Tools Speed range: 6,000 rpm Feed Rates Rapid traverse X-axis: 20,000 mm/min Rapid traverse Z-axis: 25,000 mm/min Turret Number of tool stations: 12 MACHINE DETAILS Control: Fanuc Series 18-T Dimensions & Weight Dimensions (L x W x H): 3,320 x 1,700 x 1,740 mm Weight: 4,240 kg Operating Hours Cutting hours: 7,487 h Power-on hours: 62,730 h EQUIPMENT Chip conveyor Sub-spindle Driven tools Tool presetter Caodpfjxrz Ukex Aflja Workpiece catcher Box with collets 5x additional driven tools Bar feeder

Condition: good (used), Year of construction: 2001, Movable headstock 10 axes Cajdpfx Afjxpv Elsloa Spindle speed 100 - 8,000 rpm C-axis TOOL CARRIER (X1-Y1 / X2-Y2) - 2 independent cross slides with 2 x 5 tools - Drive unit 100 - 8,000 rpm for up to 4 driven tools on X2-Y2 FRONT UNIT (X3-Z3) - Cross slide with 4 positions - Spindle speed 100 - 6,000 rpm SUB SPINDLE (X4-Y4-Z4) - Spindle speed 100 - 8,000 rpm - Slide with 3 independent axes SECONDARY OPERATIONS - Holder with 7 positions (4 end and 3 cross) - Spindle speed 100 - 10,000 rpm Workpiece conveyor Long turning option up to 600 mm Bar loader for 3m bars

Condition: used, Year of construction: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 315 mm 3-jaw chuck - Samchully MH-206 175 mm 3-jaw chuck - Year of manufacture 2011 Technical specifications Capacity: - Swing over bed: 780 mm - Swing over carriage: 630 mm - Recommended turning diameter: 255 mm - Maximum turning diameter: 376 mm - Maximum turning length: 760 mm - Bar loading capacity: 76 mm Spindle: - Spindle speed (belt type): 3500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore Ø: 86 mm - Min. spindle indexing angle (C-axis): 0.001 ° - Counter spindle speed (integrated): 6000 rpm - Counter spindle nose: ASA A2-5 - Counter spindle bearing diameter (front): 90 mm - Counter spindle through hole diameter: 62 mm - Min. counter spindle indexing angle (C-axis): 0.001 ° Tool turret: - Number of tool stations: 12 - Tool outer diameter: 25 mm Caodpfxjuxua Io Aflea - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Spindle speed of the driven tools: 5000 rpm Feed rates: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Subspindle motor: 7.5 kW - Spindle for driven tools: 5.5 kW - Feed motors (X/Z/Y axes): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions WxHxD: 3600 x 2163 x 1863 mm - Machine weight: 6450 kg Breuning bar loader: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1250 mm - Table surface: 650/900 x 1250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Condition: excellent (used), With C-axis, with driven tools MAZAK Mazatrol 640T control Turning length -982 mm Swing Diameter -610 mm Turning diametre 264 mm Spindle speeds - 4'000 rpm Tool changer with 12 driven positions Casdpou R Nd Esfx Aflea Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2000, Brand: BIGLIA, 2-axis lathe Model: B1000. Control: FANUC 18-iT. Codpfsxyqi Hox Aflsaa Chuck diameter: 315 mm Turning diameter: 400 mm. Turning length: 1000 mm. Spindle nose: ASA 8 Spindle bore: 85 mm Speed range: 30-3200 rpm Spindle motor: 26 kW S. Number of turret stations: 12 Tailstock quill diameter: 50 mm. Chip conveyor

Condition: used, Year of construction: 2018, functionality: fully functional, SMEC SL2500BSY CNC Lathe, Fanuc Control, Year 2018 – Excellent Condition For sale is our SMEC SL2500BSY CNC lathe with Fanuc control, manufactured in 2018. The machine is in good condition and can be inspected under power. We are selling the lathe solely due to space constraints. Caodpfoxac A Eex Aflja The sub spindle is NEW and has not logged any operating hours so far. Features and details: - 12-station tool turret with BMT65 interfaces, 24-position indexing - Oil skimmer with endless belt for external oil separation - Three-color warning light - LED work area illumination - Chip conveyor, discharge to the right - Automatic door - Parts ejector at sub spindle incl. through-spindle cooling - Chuck air blast device on main and sub spindle - Parts catcher with collection box - Automatic tool setter arm - Main spindle: 250 mm chuck, 76 mm bar capacity, 10" 3-jaw power chuck - Sub spindle: 210 mm chuck, 8" 3-jaw power chuck Inspection available by appointment.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Dear Sir or Madam the details of the Okuma Multus B400 with main and counter spindle tool magazine HSK 63 with 80 places 1500mm turning length main spindle passage 100mm CNC turning/milling center with CNC control OKUMA OSP P200L Enlarged main spindle Ø110mm Ø150/110mm, spindle nose size 11 Speed range 38-2800 1/min. Counter spindle as W-axis incl. hollow clamping device with Ø70mm bore in the draw tube helical interpolation also for thread milling Tool height correction in Y-axis for turning tools Extension kit "M "OSP P200L (Kit One-Touch IGF-M-D) Software multifunction tool for the use of special tools 80-station tool changer instead of 20 stations C-axis synchronization software for simultaneous control of both C-axes Increased speed 10,000 rpm for driven tools 20/14 kW, max. 85 Nm Interlit ISF 540/6670 slat-band chip conveyor with integrated coolant tank Interlit SPB4 gravity belt filter with 900 L clean tank Cajdpfxotdg Eve Aflsa Supply pump TH 90/690 FSI frequency-controlled pump for gravity belt filter SPB 4 Manual rinsing gun for attachment to additional coolant tank SPB4 SMW VNK 250/110 Power clamping cylinder for hollow sp. m. Bore Ø 110.5 mm Chuck Rota THW Plus 315-104 A11 Cylinder SMW VNK 250/110 2-stage clamping pressure for power clamping device Call by program Door automation Multus B 400 Open/close via M command two doors, both open simultaneously Chuck Rota THW Plu 315-104 A8 Cylinder SMW VNK 225/95 mounted. Year of construction: 2011 Commissioning: June 2011 Warranty: A warranty for the used machine is excluded altogether. However, HAF Präzisionstechnik assures that defects, including hidden defects, are not known. Unknown defects can therefore not be excluded. Machine is under power and in very good condition. Viewing is possible by arrangement. We are also happy to process your acceptance parts in advance.