Used Colchester Combi 2000 for sale (69)

Condition: reconditioned (used), Year of construction: 1998, Functionality: fully functional, spindle speed (max.): 2,500 rpm, spindle motor power: 7,500 W, The Colchester Combi 2000 has been overhauled in the workshop and is in very good condition. Kdjlhsu D Aw Eecdw Hen

Condition: used, Functionality: fully functional, machine/vehicle number: 6/0008/08085, MACHINE SPECIFICATION Cont’d Diametral threads (21) 8 - 44 DP Kdslhowczcfjcdw Hon Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds, per rev. of spindle 0.0015 – 0.040” Surfacing feeds, per rev. of spindle 0.00075 – 0.020” Machine in Metric execution MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 Jaw chuck Quick change toolpost Chuck guard Coolant System Lighting Rear splashguard

Condition: new, Year of construction: 2025, 0460 mm 270 mm 1500 mm Kdslewrma Ujhcdw Hjn 230 mm 76 mm 11 kW

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Kelhcdwsnr Nl So Hodn Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, Year of construction: 1979, Colchester Triumph 2000 lathe used for sale Condition and equipment as per pictures Main dimensions: Centre height: 190 mm Centre distance: 762 mm or 1270 mm Swing over bed: 385 mm Swing over cross slide: 238 mm Main spindle: 6" Camlock Spindle bore (max. bar capacity): 54 mm Centre taper: MK4 Drive power: 7.5 HP (5.6 kW) Year of manufacture cannot be determined from the documents (presumably 1979=?) Documentation available in folder Power supply: Three-phase current Further technical data should be known to any professional familiar with the machine The machine is offered with the following accessories: > Three-jaw chuck > Small and large live centers > 2x fixed centers > Steady rest > Additional chuck > Machine vice > Levelling feet Kjlhcewra Rgedw Hjdn The machine unfortunately has an oil leak at the oil pump (shaft seal or gasket). Also, the bed needs to be reworked; it currently has play of approx. 0.2 mm over 20 cm. Machine weight approx. 1500 kg. Loading available, pickup only! The machine can be test-run on site Inspection strongly recommended Location: 49143 Bissendorf Any liability for material defects is excluded and neither exchange nor return is granted.

Condition: excellent (used), Year of construction: 2000, Max. turning diameter: 460 mm Max. turning length: 1,000 mm Spindle bore: 76 mm Tools: 8-position turret Speeds: 20-2,000 rpm Kdslowrz R Ushcdw Hjn Control: FANUC 21i-TA

Condition: good (used), Functionality: fully functional, Machine Name - Colchester Kdolhsuk H Rbocdw Hjn Machine Model - Triumph 2000 Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe Kjlsrbm T Dshcdw Hjdn -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Condition: new, Year of construction: 2025, 0460 mm 270 mm 1000 mm 230 mm Kelhcdjwp Tlljw Hedn 76 mm 11 kW

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Kdjlhcdwev I Ddqe Hon Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: good (used), COLCHESTER TRIUMPH 2000 190 x 1270 mm Kjlhcdowcv H Esw Hodn 2000 rpm Bar diameter 54 mm Camlock 6" 7.5 HP/5.6 KW Weight 1180 kg Checked and functional machine and complete with accessories as shown in the photo Checked and functional machine and complete with accessories as shown in the photo

Condition: good (used), center height: 190 mm, center width: 1,250 mm, overall weight: 1,500 kg, Lead and feed screw lathe Colchester -WAG 813 Kjlhjr Iim Hscdw Hjdn On offer here is a lead screw and feed screw lathe from Colchester Technical data: Manufacturer: Colchester Type: Triumph2000 Speeds: 25-2000 rpm Top height: 190 mm Center distance: 1250 mm Machine dimensions: (w x d x h) 1200 mm x 2500 mm x 1700 mm Power connection / control voltage: 380 Volt General / technical data: Used lead and feed spindle lathe from English production with original Multifix tool holder system in good condition. The machine has a 3-axis digital readout. The machine also has a chip guard. Accessories / special equipment: Forkhardt wedge bar chuck (power chuck)

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, turning diameter over cross slide: 250 mm, travel distance X-axis: 1,250 mm, Equipment: documentation/manual, Cycle controlled CNC inclined bed lathe and at the same time full CNC in good condition. Make: Colchester Type: Combi K2 Year of manufacture: : 2001 Turning diameter 245 mm Turning length 1270 mm Control Fanuc 210 iT Spindle bore diameter 54 mm Number of controlled axes 2 Speed range 6 - 2500 rpm Rapid traverse speed 15 m/min Number of shots in the turret 4 parat Tailstock Yes MK 5 Drive power 11 kW Machine weight approx. 3.5 t Dimensions L x W x H 3.35 x 1.95 x 1.75 m Accesories: - Cooling device - Ready 4x basic holder - Various Parat tool holders - 3-jaw quick-change chuck - Easily programmable cycle interface Kdelhcdwevukdqe Hen

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 554 mm turning dia. over face-slide: 370 mm turning length: 2000 mm control: Fanuc 210i longitudinal traverse (z-axis): 1920 mm Transversal stroke (x-axis): 290 mm revolution per minute: 16 - 1800 U/min Kdolhcdwev Azdws Hsn spindle stroke: 178 mm feed:: 10 m/min. spindle passage: 104 mm spindle nose: D1 - 11 tailstock taper ISO: 6 MT spindle drive: 11/7,5 kW connection voltage: 380 V electrics - voltage/frequency: 3 Ph / 400 V / 50 Hz V/Hz total power requirement: 11 kW Weight approx.: 4,0 t dimension machine xH: 3,3 x 1,8 x 1,7 m Die Maschine befindet sich momentan in einem REKLAMATIONS VORGANG. *

Condition: used, Year of construction: 1970, Center height 225 mm Center width 1500 mm Turning diameter over bed 450 mm Turning diameter over support 250 mm Bed width 340 mm Spindle bore 76 mm Spindle mount Camlock 8“ D1 Speed range 20 - 1600 rpm Feeds – longitudinal 0.06 - 1 mm/min Feeds – face 0.03 - 0.5 mm/min Kjlhcdwovu Aq Ao Hodn Thread metric 0.5 - 14 mm Thread – inch 2 - 72 threads /“ Thread DP 8 - 60 DP Thread MOD 0.3 - 3.5 Mod. Drive power 5.6 kW Dimensions L x W x H approx. 3000 x 1100 x 1400 mm Weight approx. 2200 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, L + Z Lathe COLCHESTER Model Master 3250 Machine No. LVM 50SMR JA Year of manufacture approx. 2000 Centre distance 1250 mm Swing over bed 360 mm Swing over cross slide 190 mm Centre height over bed 180 mm Centre height over cross slide 95 mm Spindle bore 42 mm Spindle speed 20 to 340 / 55 to 1010 / 160 to 3250 rpm, 3 speed ranges Feeds longitudinal and facing Tailstock taper MT 4 Chuck flange short taper DIN 55029 D1-4 Camlock Ø 63 mm Drive power 7.5 kW Kelhswt Dyhocdw Hsdn Connected load 400 Volt, 50 Hz - 2-axis digital readout FAGOR, type ML 215 - Spindle speed adjustable via 3 gearbox ranges and steplessly via frequency inverter - 4-jaw chuck Ø 200 mm with stepped jaws (in poor condition) - PARAT quick-change toolholder with 4 tool cartridges - Coolant system - Splash guard at the rear of the machine - Hinged chuck guard - Machine lamp - Fixed steady rest Ø 160 mm - Operating manual Dimensions L x W x H 2500 x 1100 x 1750 mm Weight 1620 kg

Condition: refurbished (used), Gap Bed Between centers: 100” Swing over bed: 22″ Spindle speeds: 18 – 1400RPM Spindle bore: 3 1/2″ Diameter Kslowga Eyjhcdw Hsdn Chuck mounting: D1 – 11 Tailstock taper: No 5 Morse Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady

Condition: new, Year of construction: 2025, 0330 mm 210 mm 1000 mm 167 mm Kslhcdwewp Tq Uj Hedn 40 mm 2,2 kW

Condition: new, Year of construction: 2025, 0330 mm 1000 mm 167 mm Kdelhowp Tqzscdw Hjn 40 mm 3000 U/min DIN 55029 D1-4

Condition: new, Year of construction: 2025, 0554 mm 370 mm 2000 mm Kjlswp Tquehcdw Hodn 280 mm 104 mm 11 kW

Condition: new, Year of construction: 2025, 0400 mm 246 mm 1250 mm 195 mm Kolhowp Tpqocdw Hodn 54 mm 7,5 kW

Condition: new, Year of construction: 2024, 0350 mm 196 mm 0650 mm 170 mm Kdelhcewp Tpkjdw Hjn 42 mm 7,5 kW

Condition: new, Year of construction: 2025, 0554 mm 370 mm 3000 mm Kslhcswp Tknodw Hsdn 280 mm 104 mm 11 kW

Condition: new, Year of construction: 2023, 0460 mm 1500 mm Kdelhcdewp Th Tjw Hon 230 mm 78 mm 400 mm 2200 U/min D1-8 DIN 55029 95 mm 145 mm

Condition: new, Year of construction: 2025, 0330 mm 210 mm 0635 mm 167 mm 40 mm 2,2 kW Kdelhcdwewp Tfxs Hjn