Used Combined Drawing Machine for sale (66,361)

Condition: good (used), Code: 0400 Brand: SCM GENIUS Model: M 10/SI Universal 6-works combined machine with 3 motors for woodworking, joinery, furniture, custom-made furniture , window and door frames, doors and various Specifications: Three-phase motors V.380/50 Surface planer: Total table length 1400 mm Table width 300 mm N° 3 blades Motor Hp 3 Thickness planer: Max planing width 300 mm Max planing thickness 150 mm Feed speed 7 mt/min Table lifting by handwheel Circular saw: Max blade diameter 250 mm Hole 20 Max cutting height 85 mm Max cutting width 700 mm Blade tilt 0–45° Dcodpjzbu Azsfx Aphoi Motor 2 Hp Panel saw: Flag-type sliding carriage mounted on a movable bar Spindle moulder: Spindle diameter 30 mm Vertical stroke 120 mm Spindle speed 3000/4500/6000/7500 rpm Max tool diameter 150 mm Max spindle projection over table 100 mm Motor 2 Hp Mortising machine: Table dimensions mm 200 x 400 Spindle 0–16 mm Longitudinal stroke 150 mm Transverse stroke 90 mm Vertical adjustment by handwheel Overall dimensions of assembled machine mm 2000 x 1400 x 860 h Weight kg 450

Condition: like new (used), For sale is a used Hammer K3Winner panel saw with a cutting length of 1300 mm. The machine was only used for a short period and can therefore be described as being in new condition. Technical data: - Cutting length 1300 mm - Cutting width 800 mm - Cutting height 103 mm Dcedpfx Ajzar Hnjphoi - Max. saw blade diameter 315 mm - Height-adjustable + swiveling - Motor power 3 kW / 4.1 hp - Minor transport damage - Year of manufacture 2026 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, Hammer, panel saw, format Reference: R-G00SH

Condition: good (used), Year of construction: 2001, cutting height (max.): 240 mm, cutting width (max.): 410 mm, Surface planer and thicknesser GRIGGIO FS 410 Year of manufacture: 2001 Planing width: 410 mm Thicknessing height: 9-240 mm Spindle speed: 5000 rpm Footprint: 2100 x 1500 mm Immediately available Dcjdpey S E Ukefx Aphei

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° Dcsdjiiyppepfx Aphsi helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Dsdpfsy N Df Nsx Aphjci

Condition: excellent (used), functionality: fully functional, Sicar Furore 300I – Multi-function Machine SAW -Saw table length: 1200 mm -Saw adjustable at an angle of 0 – 45° -Saw blade diameter: 250 mm -Cutting height: 80 mm -Motor power: 1.5 kW / 230 V Jointer -Working width: 300 mm -Table dimensions: 300 x 1500 mm -3-knife cutter block -Cutter block speed: 5700 rpm -Noise reduction combs Dedpfxezarwyj Aphsci -Both tables adjustable -Motor power: 1.5 kW / 230 V Thickness Planer -Table dimensions: 300 x 660 mm -Max. workpiece height: 220 mm -Feed rate: 7 m/min Router -Spindle diameter: 30 mm -2 speeds: 4300, 6000 rpm -Motor power: 1.5 kW / 230 V Drill Press -Work table dimensions: 500 x 250 mm -Longitudinal travel: 200 mm -Transverse travel: 100 mm -Eccentric clamping device

Condition: used, Year of construction: 2005, overall weight: 1,250 kg, power: 9.5 kW (12.92 HP), input voltage: 380 V, input frequency: 50 Hz, total length: 4,700 mm, total width: 1,140 mm, total height: 1,450 mm, We are offering this used VIOLI VM TRI hydraulic pull tester, manufactured in 2005. Model: VM TRI 10 Serial number: 973 Year of manufacture: 2005 Length: 4700 mm Depth: 1140 mm Height: 1450 mm Rated voltage: 380 V Frequency: 50 Hz Power: 9.5 kW Weight: 1250 kg Dodoy Sz Awopfx Aphsci If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2024, For sale is a new Felder panel saw K540S with a cutting height of up to 140 mm. The machine is an exhibition unit in our showroom and is therefore as new (full warranty). Technical data: - Cutting height: 140 mm - Saw blade diameter: 300–400 mm - Motor: 5.5 kW / 7.5 HP - X-Roll sliding table, cutting length: 2800 mm - Rip fence cutting width: 800 mm - Outrigger table: 1300 mm Djdpey R N Apsfx Aphoci - Crosscut fence on outrigger: 2600 mm - 'Easy-Glide' tilt segment guide - CE-compliant overhead guard - 3x 400 V / 50 Hz The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: panel saw, sliding table saw, circular saw, table saw, woodworking machine, Felder Reference: R-A0117

Condition: used, Year of construction: 1989, Model - 600/6 Dcodpfx Apoyubh Rjhsi Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Dcsdper Nfvmsfx Aphsi Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Dcjdpfeyzpm Nex Aphsi

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Dcedpfx Aszcxwrophoi Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: excellent (used), Toolmax K310 multi-functional machine: saw, planer, router – 5-in-1 Dcodpfx Apey Udvxehei Planer: width 31 cm, max height 195 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length 155 cm, 3 knives, adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 150 cm sliding table, adjustable fence, Saw: adjustable up-down and 0-45 degrees, 150 cm sliding table, guide rail on the side table, max blade diameter 250 mm Horizontal drilling machine: table adjustable up-down, front-back, and left-right, the machine has 3 motors, each 3 kW + a motor for the planer feed, power supply 380 V, used machine in very good condition, ready to work.

Condition: good (used), For sale is a used MiniMax 5-function combination machine with a cutting length of 1500 mm. The machine is in good condition and has been serviced and inspected by our qualified technicians. Dcedjy Nxk Hspfx Aphei Technical specifications: - Cutting length: 1500 mm - Cutting width: 700 mm - Cutting height: 103 mm - 2 spindle speeds - 3-knife planer cutterblock - Planing width: 300 mm - Jointing length: 1400 mm - 3 motors, each 2.2 kW / 3 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-E297B

Condition: good (used), Bernardo 320 multi-function machine: saw, planer, router – 5-in-1 Planer: width 32 cm, max height approx. 220 mm, 3 knives, 1 feed speed, Jointer: width 31 cm, table length approx. 140 cm, 3 knives, Dedpfsy Ti Tmjx Apheci adjustable fence, Router: spindle diameter 30 mm, 2 speeds, 3500/7000 rpm, side carriage, adjustable fence, Saw: adjustable up-down and 0-45 degrees, side carriage, guide rail on the side carriage, Horizontal drilling machine: Table adjustable up-down, front-back, and left-right. The machine has 3 motors, each with 4 kW. Power supply: 380V. Used machine in good condition, ready for operation. Robust multi-function machine. Weight: 760 kg.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: CHA2500, Shipping costs are the responsibility of the buyer. Dcodjy U D Ihepfx Aphei

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Dcedowvt I Hjpfx Aphsi Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Weight: 140 kg

Condition: excellent (used), Robland x310 multi-function machine: saw, planer, router – 5-in-1 Dodpfxsy S Txwe Aphoci Planer: width 31cm, max. height approx. 200mm, 3 knives, 1 feed speed, Jointer: width 31cm, table length approx. 140cm, 3 knives, adjustable fence, Router: spindle diameter 30mm, 1 speed, side table, adjustable fence, Saw: adjustable up-down and 0-45 degrees, side table, fence on the side table, Horizontal drill press: table adjustable up-down, front-back, and left-right, the machine has 3 motors, each with 2.2KW, power supply 220V, used machine in very good condition, ready to work, sturdy multi-function machine.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Dsdpfxsvz Expj Apheci Weight 420 kg Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x2900x850 mm Weight 1280 kg Dcjdsvz E Ecspfx Aphsi Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Dcedpovz Eqxjfx Aphji Weight 280 kg Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Dedovz Ewlspfx Apheci Weight 420 kg Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Weight 280 kg Total power requirement 2,2 kw Dodpsvz E Drefx Apheci

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Djdpfevz E Rrjx Apheci Weight 650 kg Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1150x980 mm Weight 900 kg Total power requirement 7,5 kw Dcodpfx Apev A Hhujhoi