Used Complete Production Line for sale (31,034)

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm Kdjdpex I Itbefx Addog (1) Film application unit (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Technical details: Length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m Kdsdsx I Inxspfx Addjg (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Kdedpfx Adox I Ig Uodeg Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: With three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed 0.1–11 m/min, pulling force 25,000 N, contact length 1,500 mm, profile clearance WxH 300 x 180 mm (1) Punching device + guillotine unit Technical details: Punching force 1,800 N, design: C-frame, punching frequency 130 strokes/min, punching tool LxWxH 185x180x132 (1) Tilting table Kedpfex I Emfox Addsdg Technical details: For pushing a single-strand roller shutter into an adjacent profile, table length approx. 6,000 mm

Condition: used, Complete Wheats Breakfast Cereal Production Line 3.5 tonnes per hour capacity Product Size : 1 inch by 1 inch biscuit Max design rate 86 ton per day but client has been running at 40 tonnes per day. Multiple product capability Multiple toppings from chocolate to sugar Capable to work with paste Equipment Includes 2x 1,000 ton Silo Ksdpfxsxt H D To Addjdg SEW-EURODRIVE Screw Conveyor System Buhler MTRB Grain Separator Donaldson Torit 2DF12 Dust Collector Stainless Steel Industrial Washed Wheat Receiver Cox & Plant Vibratory Conveyor System 2x Conditioning Screw Conveyors Buhler UBKXD210/35s Bumping Mill 3x Winkworth E300 Industrial Mixers Ingredients loading System CEIA THS/MS21 Metal Detector and Vibratory Conveyor Coperion LHS400 Industrial Continuous Cooker/Processor Screw Conveyor System Fitz Mill Industrial Cooler 3x Industrial Stainless Steel Screw Conveyor Systems 16x Sasib 103a Shred Mills Industrial Conveyor System Industrial Food Processing Conveyor System Meyer Vitech Accuflex Industrial Food Processing Machine Alpha Stainless Steel Jacketed Mixing Vessel 2x Lapping Machines Depositor Longitudinal Cutter Transversal Cross Cutter Cooling Conveyor Speeder Natural Gas Oven Cooling Tunnel Frosting Holding Tank 2x Tourell Gardner 700L Jacketed Mixing Vessels Conveyor Belt System DSU Unit 4x Ishida CCW-S-210 Multihead Check Weigher and Bagger Bag transfer conveyor R.A. Jones Industrial Case Packaging Machine Mettler Toledo Safeline Metal Detector Mettler Toledo XS3 Checkweigher Smurfit Kappa Automated Packaging Machine Markem Imaje 5800 Thermal Inkjet Printer Industrial Conveyor System

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) Kdjdpfx Asu Ibuweddeg -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Year of construction: 2006, condition: excellent (used), Type: Unicut 547 Serial number: 5435 Year of construction: 2006 Block size: max 1200 x 640 x 380 mm Cutting width: 680 mm Thickness: 10 - 60 mm Air pressure: 6 Bar, 500 L/min. Power: 3 x 400V, 50Hz, 15kW Dimensions: 3400 x 1300 x 2650 mm Weight: 2500 kg Type: Galan 930 Serial number: 5431 Year of construction: 2006 Product size: max 370 x 160 mm Product length: 6 - 130 mm Cutting set: 20 mm Belt width: 360 mm Air pressure: 6 Bar, 20 L/min. Kjdpok Twx Hsfx Addsdg Power: 3 x 400V, 50Hz, 7kW Dimensions: 4350 x 1250 x 1700 mm Weight: 1000 kg

Condition: used, Complete production line for the manufacture of slatted frames. From woodworking through to final assembly and packaging. Includes all components such as moulders, saws, profile processing, forklifts, compressors, etc. The larger machines/plants are from around year of construction 2000. Consisting of: Production of solid wood rails: - 2 x Multiblade rip saws RAIMANN KR 450 + KS 310 - Optimising cross-cut saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling / Finishing of longitudinal rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC drilling and sawing units: - KOCH CNC drilling and sawing line with turning and stacking unit - ISE CNC drilling and sawing unit with stacking unit - 2 x ISE CNC woodworking centres / drilling units - ISE CNC machining centre for spring slats - 2 x Manual slat drilling machines Single machines: - GANNOmat CNC drilling and dowelling machine - Pnahans table routing machine - 2 x EiMa double mitre saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combination sawing and milling machine - 2 x Multi-spindle drilling machines - 2 x Belt sanders - Spray booth - Various small machines Assembly: - Automatic assembly machine for standard slatted frames - Capping press / line - 14 x Pneumatic assembly tables Logistics – operating equipment: - 3 x LINDE forklift trucks E16 / E20 - 7 x LINDE high-lift/ electric pallet stackers - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower - Extraction system outdoor area - Batch of mesh boxes & Euro pallets - Various racking systems Packaging: - Shrink tunnel system - Stationary pallet wrapper Kdodpfx Aex S Scbjddog - Mobile pallet wrapper Materials: - Remaining stock of timber / spring slats - Remaining stock of end caps / plastic parts - Miscellaneous remaining assembly materials Many more PHOTOS and detailed DATA available on request.

Condition: used, Year of construction: 2000, Complete production line for the manufacture of slatted frames. From woodworking through to final assembly and packaging. Includes all components such as moulders, saws, profile processing, forklifts, compressors, etc. The larger machines/plants are from around year of construction 2000. Consisting of: Production of solid wood rails: - 2 x Multiblade rip saws RAIMANN KR 450 + KS 310 - Optimising cross-cut saw GRECON ILLERTISSEN OPTICUT 704R - Four-sided planer WEINIG HYDROMAT 23 - Stacking unit Foiling / Finishing of longitudinal rails: - 2 x Profile wrapping machines FRIZ OPTIMA PU25-PAP - Foil cutting machine FRIZ FSM 1500 CNC drilling and sawing units: - KOCH CNC drilling and sawing line with turning and stacking unit - ISE CNC drilling and sawing unit with stacking unit - 2 x ISE CNC woodworking centres / drilling units - ISE CNC machining centre for spring slats - 2 x Manual slat drilling machines Single machines: - GANNOmat CNC drilling and dowelling machine - Pnahans table routing machine - 2 x EiMa double mitre saws - SCM panel saw - Barth frame press - 2 x FLOTT column drilling machines - SAMCO combination sawing and milling machine - 2 x Multi-spindle drilling machines - 2 x Belt sanders - Spray booth - Various small machines Assembly: - Automatic assembly machine for standard slatted frames - Capping press / line - 14 x Pneumatic assembly tables Logistics – operating equipment: - 3 x LINDE forklift trucks E16 / E20 - 7 x LINDE high-lift/ electric pallet stackers - WEYCOR wheel loader 95E SUPER - Atlas-Copco compressor system - WEIMA single-shaft shredder - Kärcher ride-on sweeper - HONDA snow blower Kodpfx Adsx S Sb Dodjdg - Extraction system outdoor area - Batch of mesh boxes & Euro pallets - Various racking systems Packaging: - Shrink tunnel system - Stationary pallet wrapper - Mobile pallet wrapper Materials: - Remaining stock of timber / spring slats - Remaining stock of end caps / plastic parts - Miscellaneous remaining assembly materials Many more PHOTOS and detailed DATA available on request.

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 Kedpfx Aju D Amgjddsdg 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: ready for operation (used), Now available! Complete dumpling/knödel production line In very good condition. Production line capacity: 1,200 kg per hour Kodpfx Adex H Sapsdedg For further specifications of this line, please see attachments. The line can be inspected in Stavenhagen, Germany. The installation is still fully operational and connected to power, making live demonstrations possible. The line is complete and starts with the storage of potato flakes. These are subsequently mixed in the correct ratio. The system can also process other raw materials, such as bread dough or alternative ingredients – for which an additional big bag station is available. After mixing, the product is weighed and further blended before being conveyed to the Rheon forming machines. The Rheon machines form the product; if desired, an internal filling can also be applied. The product is then transferred to the breading drum and subsequently to the spiral freezer, where the exterior is hardened to guarantee good packability. After freezing, the product is weighed by a multihead weigher and packed in doypack pouches. It then passes through the pasteurization tunnel, ensuring a longer shelf life. The packaging is subsequently dried with an air blower. Finally, a weight and metal detection check is carried out before the products are automatically packed into cartons via a repacking machine. The boxes are then automatically palletized, after which the products are ready for transport. Multiple photos available (please contact us for further information).

Condition: good (used), Year of construction: 2019, functionality: fully functional, inner dimension length: 7,400 mm, inner dimension width: 1,600 mm, inner dimension height: 2,200 mm, Powder Coating – Complete Production Line for Large Components – Including Curing Oven 7,400 mm, Year 2018-2021 Complete powder coating system for large components, including: • OVEN (1): Vismont KWP-440/114 – Interior length: 7,400 mm – Year 2018 • OVEN (2): Libra SLET40-25-20 – Year 2020 Kdodpfxexrd A Do Addeg • POWDER BOOTH: Vismont KNP-1500/06 – Year 2018 • WASHING SYSTEM: Libra MR35-21-17 – Year 2021 • MANUAL WASHING SYSTEM: Libra MR42 – Year 2020 • AIR FILTRATION UNIT: Kemper 390600 – Year 2016 • MANUAL POWDER COATING SYSTEM: Nordson Encore HD MPS – Year 2021 • SCREW COMPRESSOR: Kaeser SM 15 – Year 2013 • TRAVERSING CONVEYOR SYSTEM • FORKLIFT TRUCK: Hyundai 30L-7A – Year 2012 All equipment is operational and fully functional. Price: Depending on partial or complete purchase.

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. Kdsdpfx Ajyaiafjddeg The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Year of construction: 2022, condition: new, Service - preparation of an offer Kdedpfxefnk H Sj Addeg for powder coating plant of the company Romer. directly from the manufacturer romer germany Manufacturer of powder coating plants and industrial furnaces, plant engineering Delivery time approx. 10 to 16 weeks Shipping costs must be calculated separately.

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), Kjdpfjx Tifiex Addodg - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: good (used), Year of construction: 2010, 15 kg euroblock cheese production line. Capacity: 6.000 liters milk per batch input. Capacity of cheese: 600 kg cheese output. Milk reception - Milk reception pump from truck. - Raw milk storage tanks (cooled). 2 x 6.000 liter, Meuller. Year: 2012. - Milk receiving manifold (Tuchenhagen valves). Milk processing - Van t’ Riet Pasteurizer incl. program, 6,000 liters. Year of construction: 1996. - Buffer pasteurized milk tank 6.500 liters. Cheese processing - Damrow closed cheese vat (double O), 6,000 liter capacity per batch. Kdedpfx Adox Ekptedjg - Van t’ Riet drainage pre-pressing vat. Year of construction: 2010. - Tunnel presses (42 cylinders), Van ’t Riet. - micro perforated LAUDE moulds, 15 kg euro block. - 2x mould washers bins. - 8x brine cages (excluding brine baths, which are cast in concrete) - 2x brine cooling. Whey - Horizontal whey tank, over 6,000 liters capacity. CIP - CIP (full automatic, Siemens S7) consisting of 1 tank with 3 compartments Can be visited on request.

Condition: like new (used), Year of construction: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EGDE COMPLETE LINE INCLUDES: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE FILLER V200, YOM 2010 15.120 RUNNING HOURS CAPACITY 9.000 CARTONS PER HOUR 2. TETRA PAK ACHX 10-0400-44 HELIX CARTON ACCUMULATOR V400, YOM 2010, 17.431 RUNNING HOURS 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM APGRATED V300, YOM 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, YOM 2010, 10.914 RUNNING HOURS 5. TETRA PAK FILM WRAPPER 32 V400, YOM 2010, NEVER USED, ONLY 45 HOURS! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, YOM 2010 WRAP AROUND 7. TETRA PAK LINE CONTROLLER LC30+ 8. CONVEYORS SYSTEM 9. INC PRINTER VIDEOJET 1620 Kdedpfx Adoya Nf Iodeg THE LINE IS IN AS NEW CONDITION. LOCATION - SWEDEN. READY FOR DISMANTLING AND SHIPPING IMMEDIATELY. PRICE UNDER REQUEST

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Equipment: rotational speed infinitely variable, For sale is a UC Matic 15 window production line as well as a Powermat 500 from Weinig, comprising the following main components: - Infeed mechanization - CNC machining center Unirex 2000 - CNC end processing unit Unitec 15 - CNC longitudinal profiling machine Unicontrol 12 Kdsdpfx Adox Sqxhsdjg - Automatic double-part turning and return system - Outfeed buffer - Powermat 500 with mechanization The line is configured as an integrated production system for window and profile processing, enabling efficient and flexible manufacturing.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Kdjdpfxsx Dmdhs Addog Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Condition: excellent (used), Catalogue number: 7817 TECHNICAL DATA DDCA - Double-End Tenoner - Minimum panel width: 180 mm - Maximum panel width: 850 mm - Minimum panel height: 10 mm - Maximum panel height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 4 blades included 5 spindles: Left side: 1) Top vertical spindle 2.2 kW 2) Bottom horizontal spindle 2.2 kW Right side: 1) Bottom vertical spindle 2.2 kW 2) Top vertical spindle 2.2 kW 3) Bottom horizontal spindle 2.2 kW - Spindles adjustable up/down and left/right - 2 material hold-downs - Stepless feed speed adjustment: 0–10 m/min - Central lubrication via oil pump - Pump motor: 2.2 kW - Extraction port diameter: 5 x 100 mm - Dimensions (LxWxH): 1900 x 2230 x 1530 mm DDGA - Four-Sided Planer - Maximum panel width: 130 mm - Panel height: 10–60 mm - Minimum workpiece length: 200 mm Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - Top and bottom spindle diameter: 40 mm - Right and left spindle diameter: 30 mm - 4 feed speeds: 13/20/26/40 - Central chain lubrication via oil pump - Extraction port diameter: 4 x 120 mm - Dimensions (LxWxH): 3200 x 1370 x 1830 mm DBCA - Tenoner Infeed Conveyor - Maximum feed speed: 40 m/min - Maximum panel width: 150 mm - Motor: 0.55 kW - Overall dimensions (LxWxH): 2320 x 600 x 1150 mm DBGA - Strip Infeed Conveyor - Strip length: 200–600 mm - Strip width: 30–120 mm - Strip thickness: 10–40 mm - Stepless feed speed adjustment: 10–40 m/min - Motor: 0.75 kW - Overall dimensions (LxWxH): 1500 x 500 x 980 mm - Total weight: approx. 4900 kg – Polish production – DTR technical documentation included – 5 spindles – Unpainted – Very good condition – Used machine Net price: 63,900 PLN Kdjdpfxoxwytij Addog Net price: 15,200 EUR, according to the exchange rate of 4.2 EUR (Prices may vary according to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used purely for informational purposes to allow identification of the goods. We only resell items that have already been put on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), CATALOG NUMBER 7816 TECHNICAL DATA DDCA - Maximum batten length: 85 mm - Minimum batten width: 180 mm - Maximum batten width: 845 mm - Minimum batten height: 10 mm - Maximum batten height: 45 mm - Spindle diameter: 30 mm - Maximum blade diameter: 250 mm - 5 spindles: - Left side: 1) Vertical top spindle 2.2 kW 2) Horizontal bottom spindle 2.2 kW Kodpfxoxxxbnj Addsdg - Right side: 1) Vertical bottom spindle 2.2 kW 2) Vertical top spindle 2.2 kW 3) Horizontal bottom spindle 2.2 kW - Spindles adjustable up/down, right/left - Material hold-down: 2 pcs - Stepless feed speed adjustment: 0–10 m/min - Spindle diameter: 5x100 mm - Dimensions (L/W/H): 1870/2230/1320 mm DDGA - Maximum batten width: 130 mm - Maximum batten height: 100 mm - Spindle arrangement: 1) Bottom spindle 5.5 kW 2) Right spindle 5.5 kW 3) Left spindle 5.5 kW 4) Top spindle 5.5 kW - Spindles adjustable up/down - 6-knife cutterheads mounted on top and bottom spindles - Spindle diameter: 40 mm - Shaper cutters mounted on right and left spindles, max diameter 50 mm - Spindle diameter: 30 mm - 2 feed speeds: 4.9 kW - Central chain lubrication by oil pump - Spindle diameter: 4x125 mm - Dimensions (L/W/H): 3100/1300/1700 mm ADVANTAGES - Manufactured in Poland - 5 spindles - Unpainted - Very good condition - Used production line - High quality, low price Net price: 52,900 PLN Net price: 12,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), OMEV Pallet Production Line - Fully automatic - corner milling Ksdpfx Adeuz Igasdsdg - stacker - sign burning

Condition: excellent (used), STORTI Pallet Production Line - Fully automatic - corner milling Kjdpfxjuz Ibdo Addodg - stacker - sign burning

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 700 mm, total width: 2,000 mm, total height: 1,350 mm, type of input current: three-phase, input voltage: 380 V, working width: 1,300 mm, The DRM model offers the most economic single roller coater for smaller or start-up companies looking to oil wooden floorboards. This machine is specifically designed for the application of oil and glue. The machine is fully operational without any functional defaults. The machine comes with two new glue trays. Contact us for a quote, or visit our Test Center for a free demo. Kjdpfexdxf Rox Addjdg

Condition: excellent (used), Double STDN pancake baking carousel system. Superb system designed for reliable high volume production of pancakes and crepes, blinis etc. Extremely hard to find on the used market. diameters can be adjusted from 30mm to 240mm and weights from 8g to 100g. New cost of this system is in excess of 500,000. We also have a continuous waffle manufacturing line for sale. Kjdpexlra Refx Addsdg